コード例 #1
0
ファイル: bsp_gp22.c プロジェクト: funshine/LIDAR
/**
 * \brief	Sets a Register of the TDC-GP22.
 * \param[in]	reg is the readable register of the GP22.
 * \param[out]	value is a pointer to the storage of the register value.
 * \param[in]	len indicates how many bytes have to read.
 * \return	FALSE if the SPI transmission get a time out.
 */
uint8_t bsp_GP22RegRead(uint8_t reg, uint32_t *value, uint8_t len) {
	uint8_t success;
	uint8_t tx_bytes[5];
	uint8_t rx_bytes[5];

	assert(GP22_IS_RD(reg));
	assert(len==2 || len==4);

	/* First send a read command */
	tx_bytes[0] = reg;
	success = bsp_SPITransmitBlocked(BSP_SPI_CS_GP22, tx_bytes, len+1, rx_bytes);

	/* Transform received bytes to a 32 bit integer */
	if (success) {
		if (len == 2) {
			*value = bytes2short(&(rx_bytes[1]));
		}
		else if (len == 4) {
			*value = bytes2long(&(rx_bytes[1]));
		}
		else {
			success = 0;
		}
	}

	return success;
}
コード例 #2
0
ReturnValue BleApiTest_TestEncodingLongExactLength(pBleDevice dev)
{
	ReturnValue retval;

	/* write U2F VERSION command to get U2F protocol version */
	unsigned char request[] = { 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x06 };
	unsigned char reply[256];
	unsigned int replyLength = sizeof(reply);
	unsigned char replyCmd;

	// short encoding, requesting 65535 return bytes.
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, 7, &replyCmd, reply,
			      &replyLength);
	if (!retval)
		return retval;

	CHECK_EQ(FIDO_RESP_SUCCESS, bytes2short(reply, replyLength - 2), "expects FIDO_RESP_SUCCESS (0x9000)");

	/* drop reply status code. */
	reply[replyLength - 2] = '\0';

	/* check U2F Protocol version */
  CHECK_EQ((replyLength - 2), 6, "U2FProtocolVersion length should be 6 bytes and 2 bytes result code.");
  CHECK_EQ(memcmp(reply, "U2F_V2", 6), 0, "U2FProtocolVersion should be U2F_V2");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #3
0
ReturnValue BleApiTest_BadCLA(pBleDevice dev)
{
	ReturnValue retval;

	/* write U2F VERSION command to get U2F protocol version */
	unsigned char request[] =
	    { 0x01 /* != 0 */ , 0x03, 0x00, 0x00, 0x00, 0x00, 0x00 };
	unsigned char reply[256];
	unsigned int replyLength = sizeof(reply);
	unsigned char replyCmd;

	request[0] = 0x01 + (rand() % 0xFF);

	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, 7, &replyCmd, reply,
			      &replyLength);
	if (!retval)
		return retval;

	/* check reply */
	CHECK_EQ(replyLength, 2, "expects a 2 byte error reply.");
  CHECK_NE(FIDO_RESP_SUCCESS, bytes2short(reply, 0), "message does not accept FIDO_RESP_SUCCESS (0x9000).");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #4
0
ReturnValue BleApiTest_TestEncodingLongDataExactLength(pBleDevice dev)
{
	ReturnValue retval;

	U2F_AUTHENTICATE_REQ authReq;
	unsigned char reply[2048];
	unsigned int replyLength = sizeof(reply);
	unsigned char request[256];
	unsigned int requestlen;
	unsigned char replyCmd;

	// pick random challenge and use registered appId.
	for (size_t i = 0; i < sizeof(authReq.nonce); ++i)
		authReq.nonce[i] = rand();
	memcpy(authReq.appId, regReq.appId, sizeof(authReq.appId));
	authReq.keyHandleLen = regRsp.keyHandleLen;
	memcpy(authReq.keyHandle, regRsp.keyHandleCertSig,
	       authReq.keyHandleLen);

	uint64_t t = dev->TimeMs();

	/* prepare register request */
	request[0] = 0x00;
	request[1] = U2F_INS_AUTHENTICATE;
	request[2] = U2F_AUTH_ENFORCE;
	request[3] = 0x00;
	request[4] = 0x00;
	request[5] = 0x00;
	request[6] = U2F_NONCE_SIZE + U2F_APPID_SIZE + 1 + authReq.keyHandleLen;
	memcpy(request + 7, reinterpret_cast < char *>(&authReq), request[6]);
	requestlen = 7 + request[6];
	request[requestlen++] = 0x00;
	/* 1 byte user presence + 4 bytes counter + upto (6 + 33 + 33) bytes signature */
	request[requestlen++] = 0x01 + 0x04 + 0x48;

	/* write command */
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, requestlen, &replyCmd,
			      reply, &replyLength);
	CHECK_EQ(retval, ReturnValue::BLEAPI_ERROR_SUCCESS);

  CHECK_EQ(replyCmd, FIDO_BLE_CMD_MSG, "Reply is not a FIDO_BLE_CMD_MSG (0x83)");
	CHECK_EQ(FIDO_RESP_SUCCESS, bytes2short(reply, replyLength - 2), "expects FIDO_RESP_SUCCESS (0x9000)");
	CHECK_NE(replyLength, 2);
  CHECK_LE(replyLength - 2, sizeof(U2F_AUTHENTICATE_RESP), "Returned authentication response does not match expected length.");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #5
0
ReturnValue BleApiTest_TestEncodingLongDataWrongLength(pBleDevice dev)
{
	ReturnValue retval;

	U2F_AUTHENTICATE_REQ authReq;
	unsigned char reply[2048];
	unsigned int replyLength = sizeof(reply);
	unsigned char request[256];
	unsigned int requestlen;
	unsigned char replyCmd;

	// pick random challenge and use registered appId.
	for (size_t i = 0; i < sizeof(authReq.nonce); ++i)
		authReq.nonce[i] = rand();
	memcpy(authReq.appId, regReq.appId, sizeof(authReq.appId));
	authReq.keyHandleLen = regRsp.keyHandleLen;
	memcpy(authReq.keyHandle, regRsp.keyHandleCertSig,
	       authReq.keyHandleLen);

	uint64_t t = dev->TimeMs();

	/* prepare register request */
	request[0] = 0x00;
	request[1] = U2F_INS_AUTHENTICATE;
	request[2] = U2F_AUTH_ENFORCE;
	request[3] = 0x00;
	request[4] = 0x00;
	request[5] = 0x00;
	request[6] = U2F_NONCE_SIZE + U2F_APPID_SIZE + 1 + authReq.keyHandleLen;
	memcpy(request + 7, reinterpret_cast < char *>(&authReq), request[6]);
	requestlen = 7 + request[6];
	request[requestlen++] = 0x00;
	request[requestlen++] = 0x08;	/* fixed at 8 bytes, which is too short */

	/* write command */
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, requestlen, &replyCmd,
			      reply, &replyLength);
	CHECK_EQ(retval, ReturnValue::BLEAPI_ERROR_SUCCESS);

	/* check U2F Protocol version */
	CHECK_EQ(replyLength, 2);
  CHECK_EQ(FIDO_RESP_WRONG_LENGTH, bytes2short(reply, 0), "expects FIDO_RESP_WRONG_LENGTH (0x6700)");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #6
0
ファイル: tiff.c プロジェクト: nejmd/JPEG
/* Reads a short from the file */
static uint16_t read_short(struct tiff_file_desc *tfd, bool *error)
{
        uint16_t value = -1;

        if (tfd != NULL && tfd->file != NULL && !*error) {
                uint8_t buf[2];
                size_t ret;

                ret = fread(buf, 1, sizeof(buf), tfd->file);

                if (ret != sizeof(buf))
                        *error = true;

                else
                        value = bytes2short(buf, tfd->is_le);
        }
        else
                *error = true;

        return value;
}
コード例 #7
0
ReturnValue BleApiTest_VersionWrongLength(pBleDevice dev)
{
	ReturnValue retval;

	/* write U2F VERSION command to get U2F protocol version */
	unsigned char request[] =
	    { 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x03 };
	unsigned char reply[256];
	unsigned int replyLength = sizeof(reply);
	unsigned char replyCmd;
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, 10, &replyCmd, reply,
			      &replyLength);
	if (!retval)
		return retval;

	/* check reply */
	CHECK_EQ(replyLength, 2, "expects a 2 byte error reply.");
	CHECK_EQ(FIDO_RESP_WRONG_LENGTH, bytes2short(reply, 0), "message expects FIDO_RESP_WRONG_LENGTH (0x6700).");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #8
0
ReturnValue BleApiTest_TestEncodingLongWrongLength(pBleDevice dev)
{
	ReturnValue retval;

	/* write U2F VERSION command to get U2F protocol version */
	unsigned char request[] = { 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x02 };
	unsigned char reply[256];
	unsigned int replyLength = sizeof(reply);
	unsigned char replyCmd;

	// short encoding, requesting 255 return bytes.
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, 7, &replyCmd, reply,
			      &replyLength);
	if (!retval)
		return retval;

	/* check U2F Protocol version */
	CHECK_EQ(replyLength, 2);
  CHECK_EQ(FIDO_RESP_WRONG_LENGTH, bytes2short(reply, 0), "expects FIDO_RESP_WRONG_LENGTH (0x6700)");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #9
0
ReturnValue BleApiTest_UnknownINS(pBleDevice dev)
{
	ReturnValue retval;

	/* write U2F VERSION command to get U2F protocol version */
	unsigned char request[] =
	    { 0x00, 0x00 /* not U2F instruction */ , 0x00, 0x00, 0x00, 0x00,
		0x00
	};
	unsigned char reply[256];
	unsigned int replyLength = sizeof(reply);
	unsigned char replyCmd;
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, 7, &replyCmd, reply,
			      &replyLength);
	if (!retval)
		return retval;

	/* check reply */
	CHECK_EQ(replyLength, 2, "expects a 2 byte error reply.");
  CHECK_EQ(FIDO_RESP_INVALID_INSTRUCTION, bytes2short(reply, 0), "expects FIDO_RESP_INVALID_INSTRUCTION (0x6D00).");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #10
0
ファイル: tiff.c プロジェクト: nejmd/JPEG
/* Reads an IFD entry and updates the right tiff fields */
static void read_ifd_entry(struct tiff_file_desc *tfd, bool *error)
{
        if (error == NULL || *error)
                return;


        uint16_t tag;
        uint16_t type;
        uint32_t count;
        uint32_t offset;
        uint32_t value;
        uint32_t next_value = 0;
        uint32_t cur_pos;
        uint8_t buf[4];
        size_t ret;

        /* Identification tag */
        tag = read_short(tfd, error);

        /* Type */
        type = read_short(tfd, error);

        /* Number of values */
        count = read_long(tfd, error);


        /* Value */
        ret = fread(buf, 1, sizeof(buf), tfd->file);

        if (ret != sizeof(buf))
                *error = true;


        offset = bytes2long(buf, tfd->is_le);


        switch (type) {
        case BYTE:
                value = buf[0];
                break;

        case SHORT:
                value = bytes2short(buf, tfd->is_le);

                uint8_t *next_buf = &buf[2];
                next_value = bytes2short(next_buf, tfd->is_le);
                break;

        case LONG:
                value = offset;
                break;

        /* Unused values */
        case ASCII:
        case RATIONAL:
        default:
                value = 0;
        }


        switch(tag) {

        /* ImageWidth */
        case 0x0100:
                tfd->width = value;
                break;

        /* ImageLength */
        case 0x0101:
                tfd->height = value;
                break;

        /* BitsPerSample */
        case 0x0102:
                if (count <= 2)
                        tfd->bits_per_sample = value;
                else {
                        cur_pos = ftell(tfd->file);
                        fseek(tfd->file, offset, SEEK_SET);

                        tfd->bits_per_sample = read_short(tfd, error);

                        fseek(tfd->file, cur_pos, SEEK_SET);
                }
                break;

        /* Compression */
        case 0x0103:
                tfd->compression = value;
                break;

        /* PhotometricInterpretation */
        case 0x0106:
                tfd->photometric_interpretation = value;
                break;

        /* StripOffsets */
        case 0x0111:
                tfd->nb_strips = count;
                tfd->strip_offsets = calloc(count, sizeof(uint32_t));

                if (tfd->strip_offsets == NULL) {
                        *error = true;
                        return;
                }


                if ((count > 1 && type == LONG) || (count > 2 && type == SHORT)) {

                        cur_pos = ftell(tfd->file);
                        fseek(tfd->file, offset, SEEK_SET);

                        for (uint32_t i = 0; i < count; ++i)
                                tfd->strip_offsets[i] = read_long(tfd, error);

                        fseek(tfd->file, cur_pos, SEEK_SET);
                        
                } else if (type == SHORT && count == 2) {
                        tfd->strip_offsets[0] = value;
                        tfd->strip_offsets[1] = next_value;
                                        
                } else
                        tfd->strip_offsets[0] = value;

                break;


        /* SamplesPerPixel */
        case 0x0115:
                tfd->samples_per_pixels = value;
                break;

        /* RowsPerStrip */
        case 0x0116:
                /*
                 * Big values mean infinity,
                 * in which case there are no strips
                 */
                if (value > 0xFFFFFF)
                        value = 0;

                tfd->rows_per_strip = value;
                break;

        /* StripByteCounts */
        case 0x0117:

                tfd->strip_bytes_count = count;
                tfd->strip_bytes = calloc(count, sizeof(uint32_t));

                if (tfd->strip_bytes == NULL) {
                        *error = true;
                        return;
                }


                if ((count > 1 && type == LONG) || (count > 2 && type == SHORT)) {

                        cur_pos = ftell(tfd->file);
                        fseek(tfd->file, offset, SEEK_SET);

                        for (uint32_t i = 0; i < count; ++i)
                                tfd->strip_bytes[i] = read_long(tfd, error);

                        fseek(tfd->file, cur_pos, SEEK_SET);
                
                } else if (type == SHORT && count == 2) {
                        tfd->strip_bytes[0] = value;
                        tfd->strip_bytes[1] = next_value;
                }

                else
                        tfd->strip_bytes[0] = value;
        }
}
コード例 #11
0
ReturnValue BleApiTest_Sign(pBleDevice dev, uint32_t *ctr, int expectedSW12, bool checkOnly,
			 bool corruptKH, bool corruptAddId)
{
	ReturnValue retval;

	U2F_AUTHENTICATE_REQ authReq;
	unsigned char reply[2048];
	unsigned int replyLength = sizeof(reply);
	unsigned char request[256];
	unsigned int requestlen;
	unsigned char replyCmd;

	// pick random challenge and use registered appId.
	for (size_t i = 0; i < sizeof(authReq.nonce); ++i)
		authReq.nonce[i] = rand();
	memcpy(authReq.appId, regReq.appId, sizeof(authReq.appId));
	authReq.keyHandleLen = regRsp.keyHandleLen;
	memcpy(authReq.keyHandle, regRsp.keyHandleCertSig,
	       authReq.keyHandleLen);

	if (corruptKH)
		authReq.keyHandle[0] ^= 0x55;
	if (corruptAddId)
		authReq.appId[0] ^= 0xAA;

	uint64_t t = dev->TimeMs();

	/* prepare register request */
	request[0] = 0x00;
	request[1] = U2F_INS_AUTHENTICATE;
	request[2] = checkOnly ? U2F_AUTH_CHECK_ONLY : U2F_AUTH_ENFORCE;
	request[3] = 0x00;
	request[4] = 0x00;
	request[5] = 0x00;
	request[6] = U2F_NONCE_SIZE + U2F_APPID_SIZE + 1 + authReq.keyHandleLen;
	memcpy(request + 7, reinterpret_cast < char *>(&authReq), request[6]);
	requestlen = 7 + request[6];
	request[requestlen++] = 0x00;
	request[requestlen++] = 0x00;

	/* write command */
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, requestlen, &replyCmd,
			      reply, &replyLength);
	CHECK_EQ(retval, ReturnValue::BLEAPI_ERROR_SUCCESS);

	if (expectedSW12 != FIDO_RESP_SUCCESS) {
		CHECK_EQ(expectedSW12, bytes2short(reply, replyLength - 2), "Returned error does not match expected value.");
		CHECK_EQ(replyLength, 2, "Returned value does not match expected length.");
		return ReturnValue::BLEAPI_ERROR_SUCCESS;
	}

	CHECK_EQ(replyCmd, FIDO_BLE_CMD_MSG, "Reply is not a FIDO_BLE_CMD_MSG (0x83)");
	CHECK_EQ(FIDO_RESP_SUCCESS, bytes2short(reply, replyLength - 2), "Status code is not FIDO_RESP_SUCCESS (0x9000)");
	CHECK_NE(replyLength, 2, "Reply length is only status code.");
	CHECK_LE(replyLength - 2, sizeof(U2F_AUTHENTICATE_RESP), "Returned authentication response does not match expected length.");

	U2F_AUTHENTICATE_RESP resp;
	memcpy(&resp, reply, replyLength - 2);

	CHECK_EQ(resp.flags, 0x01, "Flags value in authentication response is always 1");

	INFO << "Sign: " << (replyLength - 2) << " bytes in "
	    << ((float)(dev->TimeMs() - t)) / 1000.0 << "s";

	// Parse signature from authenticate response.
	p256_int sig_r, sig_s;
	CHECK_EQ(1, dsa_sig_unpack(resp.sig,
				   replyLength - 2 - sizeof(resp.flags) -
				   sizeof(resp.ctr), &sig_r, &sig_s));

	// Compute hash as integer.
	p256_int h;
	SHA256_CTX sha;
	SHA256_init(&sha);
	SHA256_update(&sha, regReq.appId, sizeof(regReq.appId));	// O
	SHA256_update(&sha, &resp.flags, sizeof(resp.flags));	// T
	SHA256_update(&sha, &resp.ctr, sizeof(resp.ctr));	// CTR
	SHA256_update(&sha, authReq.nonce, sizeof(authReq.nonce));	// d
	p256_from_bin(SHA256_final(&sha), &h);

	// Parse public key from registration response.
	p256_int pk_x, pk_y;
	p256_from_bin(regRsp.pubKey.x, &pk_x);
	p256_from_bin(regRsp.pubKey.y, &pk_y);

	// Verify signature.
	CHECK_EQ(1, p256_ecdsa_verify(&pk_x, &pk_y, &h, &sig_r, &sig_s), "Signature does not match.");

  *ctr = ntohl(resp.ctr);

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}
コード例 #12
0
ReturnValue BleApiTest_Enroll(pBleDevice dev, int expectedSW12)
{
	uint64_t t = dev->TimeMs();

	ReturnValue retval;
	int i;
	unsigned char reply[2048];
	unsigned int replyLength = sizeof(reply);
	unsigned char request[256];
	unsigned int requestlen;
	unsigned char replyCmd;

	memset(reply, 0, sizeof(reply));

	/* generate appid and nonce */
	for (i = 0; i < sizeof(regReq.appId); i++)
		regReq.appId[i] = (rand() & 0xFF);
	for (i = 0; i < sizeof(regReq.nonce); i++)
		regReq.nonce[i] = (rand() & 0xFF);

	/* prepare register request */
	request[0] = 0x00;
	request[1] = 0x01;
	request[2] = 0x00;
	request[3] = 0x00;
	request[4] = 0x00;
	request[5] = 0x00;
	request[6] = sizeof(regReq.nonce) + sizeof(regReq.appId);
	memcpy(request + 7, regReq.nonce, sizeof(regReq.nonce));
	memcpy(request + 7 + sizeof(regReq.nonce), regReq.appId,
	       sizeof(regReq.appId));
	requestlen = 7 + sizeof(regReq.nonce) + sizeof(regReq.appId);
	request[requestlen++] = 0x00;
	request[requestlen++] = 0x00;

	/* write command */
	retval =
	    dev->CommandWrite(FIDO_BLE_CMD_MSG, request, requestlen, &replyCmd,
			      reply, &replyLength);
	CHECK_EQ(retval, ReturnValue::BLEAPI_ERROR_SUCCESS);

	if (expectedSW12 != FIDO_RESP_SUCCESS) {
		CHECK_EQ(expectedSW12, bytes2short(reply, replyLength - 2), "Returned error does not match expected value.");
		CHECK_EQ(replyLength, 2, "Returned value does not match expected length.");
		return ReturnValue::BLEAPI_ERROR_SUCCESS;
	}

	/* check reply */
	CHECK_EQ(replyCmd, FIDO_BLE_CMD_MSG, "Reply is not a FIDO_BLE_CMD_MSG (0x83)");
	CHECK_EQ(FIDO_RESP_SUCCESS, bytes2short(reply, replyLength - 2), "Status code is not FIDO_RESP_SUCCESS (0x9000)");
	CHECK_NE(replyLength, 2, "Reply length is only status code.");

	CHECK_LE(replyLength - 2, sizeof(U2F_REGISTER_RESP), "Returned register response does not match expected length.");

	memcpy(&regRsp, reply, replyLength - 2);

	CHECK_EQ(regRsp.registerId, U2F_REGISTER_ID, "Register ID is not 0x05");
	CHECK_EQ(regRsp.pubKey.format, UNCOMPRESSED_POINT, "Public Key format is not uncompressed point.");

	INFO << "Enroll: " << (replyLength -
			       2) << " bytes in " << ((float)(dev->TimeMs() -
							      t)) /
	    1000.0 << "s";

	// Check crypto of enroll response.
	std::string cert;
	CHECK_EQ(getCertificate(regRsp, &cert), true, "Cannot extract certificate.");
	INFO << "cert: " << bytes2ascii(cert);

	std::string pk;
	CHECK_EQ(getSubjectPublicKey(cert, &pk), true, "Cannot extract public key.");
	INFO << "pk  : " << bytes2ascii(pk);

	std::string sig;
	CHECK_EQ(getSignature(regRsp, static_cast<int>(cert.size()), &sig), true, "Cannot extract signature.");
	INFO << "sig : " << bytes2ascii(sig);

	// Parse signature into two integers.
	p256_int sig_r, sig_s;
	CHECK_EQ(1, dsa_sig_unpack((uint8_t *) (sig.data()), static_cast<int>(sig.size()),
				   &sig_r, &sig_s), "Cannot unpack signature");

	// Compute hash as integer.
	const uint8_t *hash;
	p256_int h;
	SHA256_CTX sha;
	SHA256_init(&sha);
	uint8_t rfu = 0;
	SHA256_update(&sha, &rfu, sizeof(rfu));	// 0x00
	SHA256_update(&sha, regReq.appId, sizeof(regReq.appId));	// O
	SHA256_update(&sha, regReq.nonce, sizeof(regReq.nonce));	// d
	SHA256_update(&sha, regRsp.keyHandleCertSig, regRsp.keyHandleLen);	// hk
	SHA256_update(&sha, &regRsp.pubKey, sizeof(regRsp.pubKey));	// pk
	hash = SHA256_final(&sha);
	p256_from_bin(hash, &h);

	INFO << "hash : " << bytes2ascii((char *)hash, 32);

	// Parse subject public key into two integers.
	CHECK_EQ(pk.size(), P256_POINT_SIZE, "Public key does not match P256 point size.");
	p256_int pk_x, pk_y;
	p256_from_bin((uint8_t *) pk.data() + 1, &pk_x);
	p256_from_bin((uint8_t *) pk.data() + 1 + P256_SCALAR_SIZE, &pk_y);

	// Verify signature.
	CHECK_EQ(1, p256_ecdsa_verify(&pk_x, &pk_y, &h, &sig_r, &sig_s), "Signature does not match.");

	return ReturnValue::BLEAPI_ERROR_SUCCESS;
}