static uint64_t calculate_next(struct AspeedTimer *t)
{
uint64_t next = 0;
uint32_t rate = calculate_rate(t);
while (!next) {
/* We don't know the relationship between the values in the match
* registers, so sort using MAX/MIN/zero. We sort in that order as the
* timer counts down to zero. */
uint64_t seq[] = {
calculate_time(t, MAX(t->match[0], t->match[1])),
calculate_time(t, MIN(t->match[0], t->match[1])),
calculate_time(t, 0),
};
uint64_t reload_ns;
uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
if (now < seq[0]) {
next = seq[0];
} else if (now < seq[1]) {
next = seq[1];
} else if (now < seq[2]) {
next = seq[2];
} else if (t->reload) {
reload_ns = muldiv64(t->reload, NANOSECONDS_PER_SECOND, rate);
t->start = now - ((now - t->start) % reload_ns);
} else {
/* no reload value, return 0 */
break;
}
}
return next;
}
/** \brief Substract one day from the calendar */
static void tmg_cal_sub_one_day (GtkSatModule *mod)
{
gdouble jd;
jd = calculate_time(mod);
jd -= 1;
mod->tmgCdnum = jd;
tmg_update_widgets(mod);
}
int dsk1interrupt(void) {
request_desc_p target, prev;
disk_desc *ptr;
int ticks;
double seek_time, rotate_time, transfer_time;
STATWORD ps;
disable(ps);
ptr = (disk_desc *)devtab[DISK1].dvioblk;
if(!ptr) {
restore(ps);
return SYSERR;
}
if(!ptr -> request_head) {
disk1_preempt = MAXINT;
restore(ps);
return OK;
}
for(target = ptr -> request_head, prev = NULL;target -> next;prev = target, target = target -> next);
if(prev != NULL)
prev -> next = NULL;
else
ptr -> request_head = NULL;
if(target -> type == READ_OPERATION) {
ptr -> no_of_reads++;
memncpy(target -> buffer, ptr -> disk + target -> block_no * ptr -> block_size, ptr -> block_size * target -> count);
}
else {
ptr -> no_of_writes++;
memncpy(ptr -> disk + target -> block_no * ptr -> block_size, target -> buffer, ptr -> block_size * target -> count);
}
ptr -> head_sector = target -> block_no + target -> count;
ready(target -> process_id, RESCHNO);
freemem(target, sizeof(request_desc));
// Disk Schedule
dskschedule(ptr, PA4_DISK_SCHEDULE);
if(ptr -> request_head) {
for(target = ptr -> request_head;target -> next;target = target -> next);
calculate_time(ptr, target -> block_no, &seek_time, &rotate_time);
calculate_transfer_time(ptr, target -> block_no, target -> count, &transfer_time);
ticks = ms_to_ticks(seek_time + rotate_time + transfer_time);
target -> ticks = ticks;
disk1_preempt = ticks;
}
else
disk1_preempt = MAXINT;
restore(ps);
return OK;
}
/*
* dskread() is responsible for serving each read request.
* It does:
* check simple parameter integrity,
* calculate seek time, rotate time, and transfer time
* insert the current request into each queue
* schedule the interrupt related to this request
* make the current process into block state.
* This function supports multiple continuous blocks.
* Please notice that when calling this function, block_no + count does not have to
* exceed the last block number. This function does not guarantee that block_no + count
* does not exceed.
* parameter:
* pdev: device descriptor
* buffer: a buffer to store read blocks
* block_no: the start block number to be read
* count: the number of continuous blocks to be read
*/
int dskread(struct devsw *pdev, char *buffer, int block_no, int count) {
disk_desc *ptr;
double seek_time = 0.0;
double rotate_time = 0.0;
double read_time = 0.0;
int code, ticks;
request_desc_p request;
STATWORD ps;
disable(ps);
if(!pdev || !buffer || count <= 0) {
restore(ps);
return SYSERR;
}
ptr = (disk_desc *)pdev -> dvioblk;
if(block_no < 0 || block_no + count > ptr -> logical_blocks) {
restore(ps);
return SYSERR;
}
request = (request_desc_p)getmem(sizeof(request_desc));
if(request == (request_desc_p)SYSERR) {
restore(ps);
return (int)request;
}
if(!ptr -> request_head) {
calculate_time(ptr, block_no, &seek_time, &rotate_time);
calculate_transfer_time(ptr, block_no, count, &read_time);
ticks = ms_to_ticks(seek_time + rotate_time + read_time);
if(pdev == &devtab[DISK0])
disk0_preempt = ticks;
else if(pdev == &devtab[DISK1])
disk1_preempt = ticks;
request -> ticks = ticks;
}
//kprintf("\n------------dsk read\n");
request -> type = READ_OPERATION;
request -> block_no = block_no;
request -> process_id = currpid;
request -> buffer = buffer;
request -> count = count;
request -> next = ptr -> request_head;
ptr -> request_head = request;
//kprintf("\n req buf is %s\n", request->buffer);
restore(ps);
if(dskresched() == SYSERR) {
return SYSERR;
}
return OK;
}
int main(int argc,char *argv[])
{
char data[1002];
int no_of_input;
// printf("Enter the input\n");
scanf("%d",&no_of_input);
getchar();
int i=0;
for(i=0;i<no_of_input;i++)
{
fgets(data,1002,stdin);
int time=calculate_time(data);
// puts(data);
printf("%d\n",time);
}
return 0;
}
/**
* \brief Set new date and time callback.
* \param widget The widget that was modified.
* \param data Pointer to the GtkSatModule structure.
*
* This function is called when the user changes the date or time in the time
* controller. If we are in manual time control mode, the function reads the
* date and time set in the control widget and calculates the new time for
* the module. The function does nothing in real time and simulated real
* time modes.
*/
static void tmg_time_set(GtkWidget * widget, gpointer data)
{
GtkSatModule *mod = GTK_SAT_MODULE(data);
gdouble slider;
gdouble jd;
(void)widget; /* avoid unused parameter compiler warning */
/* update time only if we are in manual time control */
if (!mod->throttle && !mod->reset)
{
jd = calculate_time(mod);
/* get slider offset */
slider = gtk_range_get_value(GTK_RANGE(mod->tmgSlider));
mod->tmgCdnum = jd + slider;
}
}
main()
{
double predeclength, wordlinelength, bitlinelength;
double regfile_power, regfile_decoder, regfile_wordline, regfile_wordline16, regfile_wordline33, regfile_bitline;
int scale_factor;
int data_width;
int rports, wports;
int switch_arg;
printf("1. Simple Register File\n");
printf("2. Simple Cache Structure\n");
printf("3. Simple CAM Structure\n");
printf("4. Complex Cache (Auto-Sized)\n");
scanf("%d",&switch_arg);
printf("note these are MAX powers (assuming full switching)\n");
switch(switch_arg){
case 1:
{
printf("Enter Reg File Params:\n");
printf("Number of Registers: ");
scanf("%d",&num_regs);
printf("Data Width: ");
scanf("%d",&data_width);
printf("Number of Read Ports: ");
scanf("%d",&rports);
printf("Number of Write Ports: ");
scanf("%d",&wports);
printf("%d-entryx%d-width,%d-rdport,%d-wrport: %f (W)\n",num_regs,data_width,rports,wports,simple_array_power(num_regs,data_width,rports,wports,0));
printf(" decode_power (W): %f\n",simple_array_decoder_power(num_regs,data_width,rports,wports,0));
printf(" wordline_power (W): %f\n",simple_array_wordline_power(num_regs,data_width,rports,wports,0));
printf(" bitline_power (W): %f\n",simple_array_bitline_power(num_regs,data_width,rports,wports,0));
break;
}
case 2:
{
printf("Enter Cache Params:\n");
printf("Size of cache: ");
scanf("%d",&num_regs);
printf("Data Width: ");
scanf("%d",&data_width);
printf("Number of Read Ports: ");
scanf("%d",&rports);
printf("Number of Write Ports: ");
scanf("%d",&wports);
printf("%d-entryx%d-width,%d-rdport,%d-wrport: %f (W)\n",num_regs,data_width,rports,wports,simple_array_power(num_regs,data_width,rports,wports,1));
printf(" decode_power (W): %f\n",simple_array_decoder_power(num_regs,data_width,rports,wports,1));
printf(" wordline_power (W): %f\n",simple_array_wordline_power(num_regs,data_width,rports,wports,1));
printf(" bitline_power (W): %f\n",simple_array_bitline_power(num_regs,data_width,rports,wports,1));
break;
}
case 3:
{
printf("Enter CAM Params:\n");
printf("Entries in CAM: ");
scanf("%d",&num_regs);
printf("Tag Width: ");
scanf("%d",&data_width);
printf("Number of Read Ports: ");
scanf("%d",&rports);
printf("Number of Write Ports: ");
scanf("%d",&wports);
printf("%d-entryx%d-tagwidth,%d-rdport,%d-wrport: %f (W)\n",num_regs,data_width,rports,wports,cam_array(num_regs,data_width,rports,wports));
printf(" tagdrive_power (W): %f\n",cam_tagdrive(num_regs,data_width,rports,wports));
printf(" tagmatch_power (W): %f\n",cam_tagmatch(num_regs,data_width,rports,wports));
break;
}
case 4:
{
int nsets, bsize, assoc,res_memport, tagsize;
int ndwl, ndbl, nspd, ntwl, ntbl, ntspd, c,b,a,cache, rowsb, colsb, trowsb, tcolsb;
double cache_decoder, cache_wordline, cache_bitline,
cache_senseamp, cache_tagarray, total_cache_power;
time_result_type time_result;
time_parameter_type time_parameters;
int va_size = 48;
printf("Enter Cache Params:\n");
printf("Number of Sets in cache: ");
scanf("%d",&nsets);
printf("Block Size (bytes): ");
scanf("%d",&bsize);
printf("Associativity: ");
scanf("%d",&assoc);
printf("Number of Memory Ports: ");
scanf("%d",&res_memport);
printf("note tagarray size is estimated based on assuming 48-bit virtual addresses\n");
cache = 1;
time_parameters.cache_size = nsets * bsize * assoc; /* C */
time_parameters.block_size = bsize; /* B */
time_parameters.associativity = assoc; /* A */
time_parameters.number_of_sets = nsets; /* C/(B*A) */
calculate_time(&time_result,&time_parameters);
output_data(&time_result,&time_parameters);
ndwl=time_result.best_Ndwl;
ndbl=time_result.best_Ndbl;
nspd=time_result.best_Nspd;
ntwl=time_result.best_Ntwl;
ntbl=time_result.best_Ntbl;
ntspd=time_result.best_Ntspd;
c = time_parameters.cache_size;
b = time_parameters.block_size;
a = time_parameters.associativity;
rowsb = c/(8*b*a*ndbl*nspd);
colsb = 8*b*a*nspd/ndwl;
tagsize = va_size - ((int)logtwo(nsets) + (int)logtwo(bsize));
trowsb = c/(8*b*a*ntbl*ntspd);
tcolsb = a * (tagsize + 1 + 6) * ntspd/ntwl;
predeclength = rowsb * (RegCellHeight + WordlineSpacing);
wordlinelength = colsb * (RegCellWidth + BitlineSpacing);
bitlinelength = rowsb * (RegCellHeight + WordlineSpacing);
cache_decoder = res_memport*ndwl*ndbl*array_decoder_power(rowsb,colsb,predeclength,1,1,cache);
cache_wordline = res_memport*ndwl*ndbl*array_wordline_power(rowsb,colsb,wordlinelength,1,1,cache);
cache_bitline = res_memport*ndwl*ndbl*array_bitline_power(rowsb,colsb,bitlinelength,1,1,cache);
cache_senseamp = res_memport*ndwl*ndbl*senseamp_power(colsb);
cache_tagarray = res_memport*ntwl*ntbl*(simple_array_power(trowsb,tcolsb,1,1,cache));
total_cache_power = cache_decoder + cache_wordline + cache_bitline + cache_senseamp + cache_tagarray;
fprintf(stderr,"%d KB %d-way cache (%d-byte block size):\n",c,a,b);
fprintf(stderr,"ndwl == %d, ndbl == %d, nspd == %d\n",ndwl,ndbl,nspd);
fprintf(stderr,"%d sets of %d rows x %d cols\n",ndwl*ndbl,rowsb,colsb);
fprintf(stderr,"tagsize == %d\n",tagsize);
fprintf(stderr,"\nntwl == %d, ntbl == %d, ntspd == %d\n",ntwl,ntbl,ntspd);
fprintf(stderr,"%d sets of %d rows x %d cols\n",ntwl*ntbl,trowsb,tcolsb);
printf("Total Power (W): %f\n",total_cache_power);
printf(" decode_power (W): %f\n",cache_decoder);
printf(" wordline_power (W): %f\n",cache_wordline);
printf(" bitline_power (W): %f\n",cache_bitline);
printf(" senseamp_power (W): %f\n",cache_senseamp);
printf(" tagarray_power (W): %f\n",cache_tagarray);
break;
}
default:
}
}
int main( int argc, char *argv[] )
{
int32 k;
char *tsuf;
timing_t start;
timing_t end;
timing_t diff;
real32 time;
real32 secs;
carray_t haystack;
hthread_t *threads;
arg_t *args;
// Allocate the threads structure
threads = (hthread_t*)malloc( tarsize * sizeof(hthread_t) );
// Allocate the argument structures
args = (arg_t*)malloc( tarsize * sizeof(arg_t) );
// Create arrays for the search string
carray_fromstr( &haystack, beowulf );
carray_concatstr( &haystack, britannica1 );
carray_concatstr( &haystack, britannica2 );
carray_concatstr( &haystack, britannica3 );
carray_concatstr( &haystack, caesar );
carray_concatstr( &haystack, hamlet );
carray_concatstr( &haystack, huckfinn );
carray_concatstr( &haystack, illiad );
carray_concatstr( &haystack, macbeth );
carray_concatstr( &haystack, pride );
carray_concatstr( &haystack, sense );
carray_concatstr( &haystack, tomsawyer );
carray_concatstr( &haystack, twist );
carray_concatstr( &haystack, ulysses );
carray_concatstr( &haystack, venice );
// Create all of the thread arguments
for( k = 0; k < tarsize; k++ )
{
args[k].search = &haystack;
args[k].found = 0;
carray_fromstr( &args[k].target, tar[k] );
boyermoore_init( &args[k].bm, &args[k].target );
}
// Create worker threads for all of the search strings
timing_get( &start );
for( k = 0; k < tarsize; k++ )
{
hthread_create( &threads[k], NULL, search, &args[k] );
}
// Wait for all of the worker threads to complete
for( k = 0; k < tarsize; k++ )
{
hthread_join( threads[k], (void*)&args[k].found );
}
timing_get( &end );
timing_diff(diff,end,start);
secs = timing_sec(diff);
calculate_time( &tsuf, &time, secs );
printf( "Test Finished: %.2f %s\n", time, tsuf );
// Show the results and destroy the thread arguments
for( k = 0; k < tarsize; k++ )
{
printf( "Thread %d found %d matches of the string '%s'\n", k, args[k].found, tar[k] );
boyermoore_destroy( &args[k].bm );
carray_destroy( &args[k].target );
}
// Exit the program
return 0;
}
total_result_type
cacti_interface (int cache_size,
int line_size,
int associativity,
int rw_ports,
int excl_read_ports,
int excl_write_ports,
int single_ended_read_ports,
int banks,
double tech_node,
int output_width,
int specific_tag,
int tag_width, int access_mode, int pure_sram)
{
int C, B, A, ERP, EWP, RWP, NSER;
double tech;
double logbanks;
double logbanksfloor;
int seq_access = 0;
int fast_access = 0;
int bits_output = output_width;
int nr_args = 9;
double NSubbanks = (double) banks;
double ratioofbankstoports;
extern int force_tag, force_tag_size;
total_result_type endresult;
endresult.result.subbanks = 0.0;
result_type result;
arearesult_type arearesult;
area_type arearesult_subbanked;
parameter_type parameters;
/* input parameters:
C B A ERP EWP */
/*dt: make sure we're using some simple leakage reduction */
dualVt = FALSE;
//#ifdef XCACTI
//parameters.latchsa = 0;
//parameters.ignore_tag = 0;
//#endif
force_tag = 0;
parameters.force_tag = 0;
if (specific_tag)
{
force_tag = 1;
force_tag_size = tag_width;
parameters.force_tag = 1;
parameters.tag_size = tag_width;
//parameters.ignore_tag = 1;
}
switch (access_mode)
{
case 0:
seq_access = fast_access = FALSE;
break;
case 1:
seq_access = TRUE;
fast_access = FALSE;
break;
case 2:
seq_access = FALSE;
fast_access = TRUE;
break;
}
C = cache_size;
A = associativity;
B = line_size;
if ((B < 1))
{
printf ("Block size must >=1\n");
return endresult;
//exit(1);
}
if ((B * 8 < bits_output))
{
printf ("Block size must be at least %d\n", bits_output / 8);
return endresult;
//exit(1);
}
tech = tech_node;
if ((tech <= 0))
{
printf ("Feature size must be > 0\n");
return endresult;
//exit(1);
}
if ((tech > 0.8))
{
printf ("Feature size must be <= 0.80 (um)\n");
return endresult;
//exit(1);
}
if (nr_args == 6)
{
RWP = 1;
ERP = 0;
EWP = 0;
NSER = 0;
}
else if (nr_args == 8)
{
RWP = 1;
ERP = 0;
EWP = 0;
NSER = 0;
bits_output = output_width;
seq_access = 1;
}
else if (nr_args == 9)
{
RWP = rw_ports;
ERP = excl_read_ports;
EWP = excl_write_ports;
NSER = single_ended_read_ports;
}
else if (nr_args >= 10)
{
RWP = rw_ports;
ERP = excl_read_ports;
EWP = excl_write_ports;
NSER = single_ended_read_ports;
seq_access = 1;
}
if ((RWP < 0) || (EWP < 0) || (ERP < 0))
{
printf ("Ports must >=0\n");
return endresult;
//exit(1);
}
if (RWP > 2)
{
printf ("Maximum of 2 read/write ports\n");
return endresult;
//exit(1);
}
if ((RWP + ERP + EWP) < 1)
{
printf ("Must have at least one port\n");
return endresult;
//exit(1);
}
if (NSubbanks < 1)
{
printf
("Number of subbanks should be greater than or equal to 1 and should be a power of 2\n");
return endresult;
//exit(1);
}
logbanks = logtwo ((double) (NSubbanks));
logbanksfloor = floor (logbanks);
if (logbanks > logbanksfloor)
{
printf
("Number of subbanks should be greater than or equal to 1 and should be a power of 2\n");
return endresult;
//exit(1);
}
if (C == B * A)
{
parameters.fully_assoc = 1;
A = C / B;
}
else
{
parameters.fully_assoc = 0;
}
C = cache_size / ((int) (NSubbanks));
if ((C < 64))
{
printf ("Cache size must >=64\n");
return endresult;
//exit(1);
}
//A = C/B;
if (A > 16)
{
parameters.fully_assoc = 1;
A = 16;
}
/*if ((associativity == 0) || (A == C/B)) {
A = C/B;
parameters.fully_assoc = 1;
} else {
if (associativity == 1)
{
A=1;
parameters.fully_assoc = 0;
}
else
{
parameters.fully_assoc = 0;
A = associativity;
if ((A < 1)) {
printf("Associativity must >= 1\n");
return endresult;
//exit(1);
}
assoc = logtwo((double)(A));
assocfloor = floor(assoc);
if(assoc > assocfloor){
printf("Associativity should be a power of 2\n");
return endresult;
//exit(1);
}
if ((A > 32)) {
printf("Associativity must <= 32\n or try FA (fully associative)\n");
return endresult;
//exit(1);
}
}
}
if (C/(B*A)<=1 && !parameters.fully_assoc) {
//printf("Number of sets is too small:\n Need to either increase cache size, or decrease associativity or block size\n (or use fully associative cache)\n");
//return endresult;
A = C/B;
parameters.fully_assoc = 1;
//exit(1);
} */
printf ("\n########### Printing input for params for testing...###");
printf ("\n C = %d, B = %d, A = %d", C, B, A);
printf ("\n RWP = %d, ERP = %d, EWP = %d, NSER = %d", RWP, ERP, EWP, NSER);
printf
("\n banks = %d, tech = %f, bits_output = %d, fast_access = %d, pure_sram = %d",
banks, tech, bits_output, fast_access, pure_sram);
printf ("\n force_tag = %d, force_tag_size = %d", force_tag,
force_tag_size);
printf ("\n #################\n");
parameters.cache_size = C;
parameters.block_size = B;
parameters.nr_bits_out = bits_output;
/*dt: testing sequential access mode */
if (seq_access)
{
parameters.tag_associativity = A;
parameters.data_associativity = 1;
parameters.sequential_access = 1;
}
else
{
parameters.tag_associativity = parameters.data_associativity = A;
parameters.sequential_access = 0;
}
if (fast_access)
{
parameters.fast_access = 1;
}
else
{
parameters.fast_access = 0;
}
parameters.num_readwrite_ports = RWP;
parameters.num_read_ports = ERP;
parameters.num_write_ports = EWP;
parameters.NSubbanks = banks;
parameters.num_single_ended_read_ports = NSER;
parameters.number_of_sets = C / (B * A);
parameters.fudgefactor = .8 / tech;
parameters.tech_size = (double) tech;
parameters.pure_sram = pure_sram;
//If multiple banks and multiple ports are specified, then if number of banks/total number
//of ports > 1 then assume that the multiple ports are implemented via the multiple banks.
//Also assume that each bank has only 1 RWP port. There are some problems with this logic that
//will be fixed in v5.0
ratioofbankstoports = NSubbanks / (RWP + ERP + EWP);
if (ratioofbankstoports >= 1.0)
{
//We assume that each bank has 1 RWP port.
parameters.num_readwrite_ports = 1;
parameters.num_read_ports = 0;
parameters.num_write_ports = 0;
parameters.num_single_ended_read_ports = 0;
}
if (parameters.number_of_sets < 1)
{
printf ("Less than one set...\n");
return endresult;
//exit(1);
}
parameters.VddPow = 4.5 / (pow (parameters.fudgefactor, (2.0 / 3.0)));
if (parameters.VddPow < 0.7)
parameters.VddPow = 0.7;
if (parameters.VddPow > 5.0)
parameters.VddPow = 5.0;
printf ("\n##### Printing parameters for testing...#####\n");
output_params (¶meters);
init_tech_params_default_process (); //v4.1: First initialize all tech variables
//to 0.8 micron values. init_tech_params function below then reinitializes tech variables to
//given process values
init_tech_params (parameters.tech_size);
calculate_time (&result, &arearesult, &arearesult_subbanked, ¶meters,
&NSubbanks);
//v4.1: No longer using calculate_area function as area has already been
//computed for the given tech node
/*arearesult.dataarray_area.scaled_area = calculate_area(arearesult.dataarray_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.datapredecode_area.scaled_area = calculate_area(arearesult.datapredecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.datacolmuxpredecode_area.scaled_area = calculate_area(arearesult.datacolmuxpredecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.datacolmuxpostdecode_area.scaled_area = calculate_area(arearesult.datacolmuxpostdecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.datawritesig_area.scaled_area = (parameters.num_readwrite_ports+parameters.num_read_ports+parameters.num_write_ports)*calculate_area(arearesult.datawritesig_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagarray_area.scaled_area = calculate_area(arearesult.tagarray_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagpredecode_area.scaled_area = calculate_area(arearesult.tagpredecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagcolmuxpredecode_area.scaled_area = calculate_area(arearesult.tagcolmuxpredecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagcolmuxpostdecode_area.scaled_area = calculate_area(arearesult.tagcolmuxpostdecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagoutdrvdecode_area.scaled_area = calculate_area(arearesult.tagoutdrvdecode_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.tagoutdrvsig_area.scaled_area = (parameters.num_readwrite_ports+parameters.num_read_ports+parameters.num_write_ports)*
calculate_area(arearesult.tagoutdrvsig_area,parameters.fudgefactor)*CONVERT_TO_MMSQUARE;
arearesult.perc_data = 100*area_all_dataramcells/(arearesult.totalarea*CONVERT_TO_MMSQUARE);
arearesult.perc_tag = 100*area_all_tagramcells/(arearesult.totalarea*CONVERT_TO_MMSQUARE);
arearesult.perc_cont = 100*(arearesult.totalarea*CONVERT_TO_MMSQUARE-area_all_dataramcells-area_all_tagramcells)/(arearesult.totalarea*CONVERT_TO_MMSQUARE);
arearesult.sub_eff = (area_all_dataramcells+area_all_tagramcells)*100/(arearesult.totalarea/100000000.0);
arearesult.total_eff = (NSubbanks)*(area_all_dataramcells+area_all_tagramcells)*100/
(calculate_area(arearesult_subbanked,parameters.fudgefactor)*CONVERT_TO_MMSQUARE);
arearesult.totalarea *= CONVERT_TO_MMSQUARE;
arearesult.subbankarea = calculate_area(arearesult_subbanked,parameters.fudgefactor)*CONVERT_TO_MMSQUARE; */
arearesult.dataarray_area.scaled_area =
arearesult.dataarray_area.height * arearesult.dataarray_area.width *
CONVERT_TO_MMSQUARE;
arearesult.datapredecode_area.scaled_area =
arearesult.datapredecode_area.height *
arearesult.datapredecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.datacolmuxpredecode_area.scaled_area =
arearesult.datacolmuxpredecode_area.height *
arearesult.datacolmuxpredecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.datacolmuxpostdecode_area.scaled_area =
arearesult.datacolmuxpostdecode_area.height *
arearesult.datacolmuxpostdecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.datawritesig_area.scaled_area =
(parameters.num_readwrite_ports + parameters.num_read_ports +
parameters.num_write_ports) * arearesult.datawritesig_area.height *
arearesult.datawritesig_area.width * CONVERT_TO_MMSQUARE;
arearesult.tagarray_area.scaled_area =
arearesult.tagarray_area.height * arearesult.tagarray_area.width *
CONVERT_TO_MMSQUARE;
arearesult.tagpredecode_area.scaled_area =
arearesult.tagpredecode_area.height * arearesult.tagpredecode_area.width *
CONVERT_TO_MMSQUARE;
arearesult.tagcolmuxpredecode_area.scaled_area =
arearesult.tagcolmuxpredecode_area.height *
arearesult.tagcolmuxpredecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.tagcolmuxpostdecode_area.scaled_area =
arearesult.tagcolmuxpostdecode_area.height *
arearesult.tagcolmuxpostdecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.tagoutdrvdecode_area.scaled_area =
arearesult.tagoutdrvdecode_area.height *
arearesult.tagoutdrvdecode_area.width * CONVERT_TO_MMSQUARE;
arearesult.tagoutdrvsig_area.scaled_area =
(parameters.num_readwrite_ports + parameters.num_read_ports +
parameters.num_write_ports) * arearesult.tagoutdrvsig_area.height *
arearesult.tagoutdrvsig_area.width * CONVERT_TO_MMSQUARE;
arearesult.perc_data =
100 * area_all_dataramcells / (arearesult.totalarea *
CONVERT_TO_MMSQUARE);
arearesult.perc_tag =
100 * area_all_tagramcells / (arearesult.totalarea * CONVERT_TO_MMSQUARE);
arearesult.perc_cont =
100 * (arearesult.totalarea * CONVERT_TO_MMSQUARE -
area_all_dataramcells -
area_all_tagramcells) / (arearesult.totalarea *
CONVERT_TO_MMSQUARE);
arearesult.sub_eff =
(area_all_dataramcells +
area_all_tagramcells) * 100 / (arearesult.totalarea / 100000000.0);
arearesult.total_eff =
(NSubbanks) * (area_all_dataramcells +
area_all_tagramcells) * 100 /
(arearesult_subbanked.height * arearesult_subbanked.width *
CONVERT_TO_MMSQUARE);
arearesult.totalarea *= CONVERT_TO_MMSQUARE;
arearesult.subbankarea =
arearesult_subbanked.height * arearesult_subbanked.width *
CONVERT_TO_MMSQUARE;
if (result.bitline_delay_data < 0.0)
{
result.bitline_delay_data = 10 ^ -12;
}
if (result.bitline_delay_tag < 0.0)
{
result.bitline_delay_tag = 10 ^ -13;
}
endresult.result = result;
endresult.result.subbanks = banks;
endresult.area = arearesult;
endresult.params = parameters;
return endresult;
}
static void apm_battery_apm_get_power_status(struct apm_power_info *info)
{
union power_supply_propval status;
union power_supply_propval capacity, time_to_full, time_to_empty;
mutex_lock(&apm_mutex);
find_main_battery();
if (!main_battery) {
mutex_unlock(&apm_mutex);
return;
}
/* status */
if (MPSY_PROP(STATUS, &status))
status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
/* ac line status */
#ifdef CONFIG_ARCH_BCM4760
{
union power_supply_propval online;
MPSY_PROP(ONLINE, &online);
if(online.intval){
info->ac_line_status = APM_AC_ONLINE;
} else {
info->ac_line_status = APM_AC_OFFLINE;
}
}
#else
if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
(status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
(status.intval == POWER_SUPPLY_STATUS_FULL))
info->ac_line_status = APM_AC_ONLINE;
else
info->ac_line_status = APM_AC_OFFLINE;
#endif
/* battery life (i.e. capacity, in percents) */
if (MPSY_PROP(CAPACITY, &capacity) == 0) {
info->battery_life = capacity.intval;
} else {
/* try calculate using energy */
info->battery_life = calculate_capacity(SOURCE_ENERGY);
/* if failed try calculate using charge instead */
if (info->battery_life == -1)
info->battery_life = calculate_capacity(SOURCE_CHARGE);
if (info->battery_life == -1)
info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
}
/* charging status */
if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
info->battery_status = APM_BATTERY_STATUS_CHARGING;
} else {
if (info->battery_life > 50)
info->battery_status = APM_BATTERY_STATUS_HIGH;
else if (info->battery_life > 5)
info->battery_status = APM_BATTERY_STATUS_LOW;
else
info->battery_status = APM_BATTERY_STATUS_CRITICAL;
}
info->battery_flag = info->battery_status;
/* time */
info->units = APM_UNITS_MINS;
if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
if (!MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full) ||
!MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
info->time = time_to_full.intval / 60;
else
info->time = calculate_time(status.intval);
} else {
if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
!MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
info->time = time_to_empty.intval / 60;
else
info->time = calculate_time(status.intval);
}
mutex_unlock(&apm_mutex);
}
static void apm_battery_apm_get_power_status(struct apm_power_info *info)
{
union power_supply_propval status;
union power_supply_propval capacity, time_to_full, time_to_empty;
mutex_lock(&apm_mutex);
find_main_battery();
if (!main_battery) {
mutex_unlock(&apm_mutex);
return;
}
if (MPSY_PROP(STATUS, &status))
status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
(status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
(status.intval == POWER_SUPPLY_STATUS_FULL))
info->ac_line_status = APM_AC_ONLINE;
else
info->ac_line_status = APM_AC_OFFLINE;
if (MPSY_PROP(CAPACITY, &capacity) == 0) {
info->battery_life = capacity.intval;
} else {
info->battery_life = calculate_capacity(SOURCE_ENERGY);
if (info->battery_life == -1)
info->battery_life = calculate_capacity(SOURCE_CHARGE);
if (info->battery_life == -1)
info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
}
if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
info->battery_status = APM_BATTERY_STATUS_CHARGING;
} else {
if (info->battery_life > 50)
info->battery_status = APM_BATTERY_STATUS_HIGH;
else if (info->battery_life > 5)
info->battery_status = APM_BATTERY_STATUS_LOW;
else
info->battery_status = APM_BATTERY_STATUS_CRITICAL;
}
info->battery_flag = info->battery_status;
info->units = APM_UNITS_MINS;
if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
if (!MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full) ||
!MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
info->time = time_to_full.intval / 60;
else
info->time = calculate_time(status.intval);
} else {
if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
!MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
info->time = time_to_empty.intval / 60;
else
info->time = calculate_time(status.intval);
}
mutex_unlock(&apm_mutex);
}
