コード例 #1
0
ファイル: conf.c プロジェクト: bradla/OpenBSD-Hammer2
	cdev_random_init(1,random),	/* 40: random data source */
	cdev_uk_init(NUK,uk),		/* 41 */
	cdev_notdef(),			/* 42 */
	cdev_ksyms_init(NKSYMS,ksyms),	/* 43: Kernel symbols device */
	cdev_ch_init(NCH,ch),		/* 44: SCSI autochanger */
	cdev_fuse_init(NFUSE,fuse),	/* 45: fuse */
	cdev_notdef(),			/* 46 */
	cdev_notdef(),			/* 47 */
	cdev_notdef(),			/* 48 */
	cdev_bio_init(NBIO,bio),	/* 49: ioctl tunnel */
	cdev_systrace_init(NSYSTRACE,systrace),	/* 50 system call tracing */
	cdev_notdef(),			/* 51 */
	cdev_ptm_init(NPTY,ptm),	/* 52: pseudo-tty ptm device */
	cdev_vscsi_init(NVSCSI,vscsi),	/* 53: vscsi */
	cdev_disk_init(1,diskmap),	/* 54: disk mapper */
	cdev_pppx_init(NPPPX,pppx),	/* 55: pppx */
};
int	nchrdev = nitems(cdevsw);

int	mem_no = 2;	/* major device number of memory special file */

/*
 * Swapdev is a fake device implemented
 * in sw.c used only internally to get to swstrategy.
 * It cannot be provided to the users, because the
 * swstrategy routine munches the b_dev and b_blkno entries
 * before calling the appropriate driver.  This would horribly
 * confuse, e.g. the hashing routines. Instead, /dev/drum is
 * provided as a character (raw) device.
 */
dev_t	swapdev = makedev(3, 0);
コード例 #2
0
ファイル: conf.c プロジェクト: orumin/openbsd-efivars
	cdev_notdef(),			/* 55: */
	cdev_notdef(),			/* 56: */
	cdev_notdef(),			/* 57: */
	cdev_notdef(),			/* 58: */
	cdev_notdef(),			/* 59: */
	cdev_notdef(),			/* 60: */
	cdev_usb_init(NUSB,usb),	/* 61: USB controller */
	cdev_usbdev_init(NUHID,uhid),	/* 62: USB generic HID */
	cdev_usbdev_init(NUGEN,ugen),	/* 63: USB generic driver */
	cdev_ulpt_init(NULPT,ulpt),	/* 64: USB printers */
	cdev_notdef(),			/* 65: was urio */
	cdev_tty_init(NUCOM,ucom),	/* 66: USB tty */
	cdev_hotplug_init(NHOTPLUG,hotplug), /* 67: devices hotplugging */
	cdev_vscsi_init(NVSCSI,vscsi),	/* 68: vscsi */
	cdev_disk_init(1,diskmap),	/* 69: disk mapper */
	cdev_pppx_init(NPPPX,pppx),	/* 70: pppx */
	cdev_notdef(),			/* 71: */
	cdev_notdef(),			/* 72: was USB scanners */
	cdev_fuse_init(NFUSE,fuse),	/* 73: fuse */
};

int	nchrdev = nitems(cdevsw);

/*
 * Swapdev is a fake device implemented
 * in sw.c used only internally to get to swstrategy.
 * It cannot be provided to the users, because the
 * swstrategy routine munches the b_dev and b_blkno entries
 * before calling the appropriate driver.  This would horribly
 * confuse, e.g. the hashing routines. Instead, /dev/drum is
 * provided as a character (raw) device.
コード例 #3
0
ファイル: conf.c プロジェクト: bradla/OpenBSD-Hammer2
#endif
	cdev_notdef(),                          /* 89: removed device */
	cdev_notdef(),                          /* 90: removed device */
	cdev_notdef(),                          /* 91: removed device */
	cdev_notdef(),                          /* 92: removed device */
	cdev_notdef(),                          /* 93: removed device */
	cdev_notdef(),                          /* 94: removed device */
	cdev_notdef(),                          /* 95: removed device */
	cdev_notdef(),                          /* 96: removed device */
	cdev_radio_init(NRADIO,radio),		/* 97: generic radio I/O */
	cdev_ptm_init(NPTY,ptm),		/* 98: pseudo-tty ptm device */
	cdev_spkr_init(NSPKR,spkr),		/* 99: PC speaker */
	cdev_vscsi_init(NVSCSI,vscsi),		/* 100: vscsi */
	cdev_notdef(),
	cdev_disk_init(1,diskmap),		/* 102: disk mapper */
	cdev_pppx_init(NPPPX,pppx),		/* 103: pppx */
};

int nblkdev = nitems(bdevsw);
int nchrdev = nitems(cdevsw);

int mem_no = 2; 	/* major device number of memory special file */

/*
 * Swapdev is a fake device implemented
 * in sw.c used only internally to get to swstrategy.
 * It cannot be provided to the users, because the
 * swstrategy routine munches the b_dev and b_blkno entries
 * before calling the appropriate driver.  This would horribly
 * confuse, e.g. the hashing routines. Instead, /dev/drum is
 * provided as a character (raw) device.
コード例 #4
0
ファイル: conf.c プロジェクト: bulibuta/openbsd-ia64
	cdev_radio_init(NRADIO, radio), /* 76: generic radio I/O */
	cdev_notdef(),			/* 77: USB scanners */
	cdev_systrace_init(NSYSTRACE,systrace),	/* 78: system call tracing */
	cdev_bio_init(NBIO,bio),	/* 79: ioctl tunnel */
	cdev_notdef(),			/* 80: gpr? XXX */
	cdev_ptm_init(NPTY,ptm),	/* 81: pseudo-tty ptm device */
	cdev_hotplug_init(NHOTPLUG,hotplug), /* 82: devices hot plugging */
	cdev_notdef(),			/* 83: ACPI */
	cdev_notdef(),			/* 84: bthub */
	cdev_notdef(),			/* 85: NVRAM interface */
	cdev_notdef(),			/* 86: agp */
	cdev_drm_init(NDRM,drm),	/* 87: drm */
	cdev_notdef(),			/* 88: gpio */
	cdev_vscsi_init(NVSCSI,vscsi),	/* 89: vscsi */
	cdev_disk_init(1,diskmap),	/* 90: disk mapper */
	cdev_pppx_init(NPPPX,pppx),     /* 91: pppx */
};
int	nchrdev = nitems(cdevsw);

int	mem_no = 2;	/* major device number of memory special file */

/*
 * Swapdev is a fake device implemented
 * in sw.c used only internally to get to swstrategy.
 * It cannot be provided to the users, because the
 * swstrategy routine munches the b_dev and b_blkno entries
 * before calling the appropriate driver.  This would horribly
 * confuse, e.g. the hashing routines. Instead, /dev/drum is
 * provided as a character (raw) device.
 */
dev_t	swapdev = makedev(1, 0);
コード例 #5
0
ファイル: conf.c プロジェクト: alenichev/openbsd-kernel
	cdev_pci_init(NPCI,pci),	/* 52: PCI user */
#else
	cdev_notdef(),
#endif
	cdev_bio_init(NBIO,bio),	/* 53: ioctl tunnel */
	cdev_iop_init(NIOP, iop),	/* 54: I2O IOP control interface */
	cdev_ptm_init(NPTY,ptm),	/* 55: pseudo-tty ptm device */
	cdev_hotplug_init(NHOTPLUG,hotplug), /* 56: devices hot plugging */
	cdev_crypto_init(NCRYPTO,crypto), /* 57: /dev/crypto */
	cdev_bktr_init(NBKTR,bktr),	/* 58: Bt848 video capture device */
	cdev_radio_init(NRADIO,radio), /* 59: generic radio I/O */
	cdev_mouse_init(NWSMUX, wsmux),	/* 60: ws multiplexor */
	cdev_vscsi_init(NVSCSI, vscsi),	/* 61: vscsi */
	cdev_bthub_init(NBTHUB, bthub), /* 62: bthub */
	cdev_disk_init(1,diskmap),	/* 63: disk mapper */
	cdev_pppx_init(NPPPX,pppx),	/* 64: pppx */
	cdev_urio_init(NURIO,urio),	/* 65: USB Diamond Rio 500 */
	cdev_usbdev_init(NUSCANNER,uscanner),	/* 66: USB scanners */
};
int	nchrdev = nitems(cdevsw);

int	mem_no = 2; 	/* major device number of memory special file */

/*
 * Swapdev is a fake device implemented
 * in sw.c used only internally to get to swstrategy.
 * It cannot be provided to the users, because the
 * swstrategy routine munches the b_dev and b_blkno entries
 * before calling the appropriate driver.  This would horribly
 * confuse, e.g. the hashing routines. Instead, /dev/drum is
 * provided as a character (raw) device.