void AGOSEngine_Feeble::inventoryUp(WindowBlock *window) {
_marks = 0;
checkUp(window);
animate(4, 9, 21, 0 ,0, 0);
while (_currentBoxNum == 0x7FFB && getBitFlag(89)) {
checkUp(window);
delay(1);
}
waitForMark(2);
checkUp(window);
sendSync(922);
waitForMark(1);
checkUp(window);
}
void Map::setBonus()
{
checkRight();
checkLeft();
checkUp();
checkDown();
}
void testNavigate(){
int check, nextX, nextY;
initDir(); //start by getting the initial direction
solution = createStack();
push(solution, current); // add the starting square to the stack
while (current->val != 'F'){ // the maze sloving loop
printf("current position: (%d, %d)\ncurrent direction: %c\n",current->x, current->y,dir);
switch(dir){
case 'n':
check = checkUp();
nextX = current->x;
nextY = current->y - 1;
break;
case 's':
check = checkDown();
nextX = current->x;
nextY = current->y + 1;
break;
case 'e':
check = checkRight();
nextX = current->x + 1;
nextY = current->y;
break;
case 'w':
check = checkLeft();
nextX = current->x - 1;
nextY = current->y;
break;
}
if (check == 1){ // if you can move, the next space is not a wall
printf("the square ahead is not a wall!\n");
if (maze[nextX][nextY]->wasHere == 1){ //we have been there already
printf("we have been here before!\n");
if (otherOptions(nextX, nextY) == 1){ // there are other options
printf("we have other options, lets turn\n");
changeDir();
printf("new direction: %c\n",dir);
} else { // no other options will need to go back to where we have been
printf("we have no other options we must go this way\n");
pop(solution); // pop from stack
current->deadEnd = 1;
current = maze[nextX][nextY]; // move
}
} else {
printf("we have not been here before, lets go!\n");
current = maze[nextX][nextY]; // move
current-> wasHere = 1;
push(solution, current); // add to stack
}
} else {
printf("the square ahead is a wall, we must change directions\n");
changeDir();
printf("new direction: %c\n",dir);
}
char c = getchar();
}
}
//判断上下左右
void RootEngine::checkFourSides(StarModel* model)
{
if (checkedBlocks->containsObject(model)) {
return;
}else {
checkedBlocks->addObject(model);
}
checkUp(model);
checkDown(model);
checkLeft(model);
checkRight(model);
}
void navigate(){
int check, nextX, nextY;
initDir(); //start by getting the initial direction
solution = createStack();
push(solution, current); // add the starting square to the stack
while (current->val != 'F'){ // the maze sloving loop
switch(dir){
case 'n':
check = checkUp();
nextX = current->x;
nextY = current->y - 1;
break;
case 's':
check = checkDown();
nextX = current->x;
nextY = current->y + 1;
break;
case 'e':
check = checkRight();
nextX = current->x + 1;
nextY = current->y;
break;
case 'w':
check = checkLeft();
nextX = current->x - 1;
nextY = current->y;
break;
}
if (check == 1){ // if you can move, the next space is not a wall
if (maze[nextX][nextY]->wasHere == 1){ //we have been there already
if (otherOptions(nextX, nextY) == 1){ // there are other options
changeDir();
} else { // no other options will need to go back to where we have been
pop(solution); // pop from stack
current->deadEnd = 1;
current = maze[nextX][nextY]; // move
}
} else {
current = maze[nextX][nextY]; // move
current-> wasHere = 1;
push(solution, current); // add to stack
}
} else {
changeDir();
}
}
}
int checkScrollDirection(int prevX, int prevY, int x, int y)
{
int badmove = 1;
moveRight = 0, moveLeft = 0, moveDown = 0, moveUp = 0;
/* Check the 8 possible move combinations to ensure correct bounds checking
If the move is possible call the corresponding direction checks that update scrolling values
If move is not possible we return badmove and the x and y values are fixed*/
if(prevX < x && prevY < y) /* move right and down */
{
if (screenRight < MAP_WIDTH - 1 && screenBottom < MAP_HEIGHT - 1)
{
checkRight();
checkDown();
}
else
{
return badmove;
}
}
else if(prevX < x && prevY > y) /* move right and up */
{
if (screenRight < MAP_WIDTH - 1 && screenTop > 0)
{
checkRight();
checkUp();
}
else
{
return badmove;
}
}
else if(prevX > x && prevY < y) /* move left and down */
{
if(screenLeft > 0 && screenBottom < MAP_HEIGHT - 1)
{
checkLeft();
checkDown();
}
else
{
return badmove;
}
}
else if(prevX > x && prevY > y) /* move left and up */
{
if (screenTop > 0 && screenLeft > 0)
{
checkLeft();
checkUp();
}
else
{
return badmove;
}
}
else if(prevX < x) /* move right */
{
if (screenRight < MAP_WIDTH - 1)
{
checkRight();
}
else
{
return badmove;
}
}
else if(prevX > x) //moveLeft
{
if (screenLeft > 0)
{
checkLeft();
}
else
{
return badmove;
}
}
else if(prevY < y) //moveDown
{
if (screenBottom < MAP_HEIGHT - 1)
{
checkDown();
}
else
{
return badmove;
}
}
else if(prevY > y) //moveUp
{
if (screenTop > 0)
{
checkUp();
}
else
{
return badmove;
}
}
/* copy necessary map rows and/or columns to the background buffer */
if (moveLeft)
{
CopyColumnToBackground(screenLeft, nextColumn, mapTop, mapBottom, starmapscrn_Map, bg0map, MAP_COLUMNS);
}
if (moveRight)
{
CopyColumnToBackground(screenRight, nextColumn, mapTop, mapBottom, starmapscrn_Map, bg0map, MAP_COLUMNS);
}
if (moveUp)
{
CopyRowToBackground(screenTop, nextRow, mapLeft, mapRight, starmapscrn_Map, bg0map, MAP_COLUMNS);
}
if (moveDown)
{
CopyRowToBackground(screenBottom, nextRow, mapLeft, mapRight, starmapscrn_Map, bg0map, MAP_COLUMNS);
}
return 0;
}
void FloorGenerator::assignUp(bool room)
{
//8 different types of Corridors can be assigned
int temp = rand() % 8;
int posX = start.front().getX();
int posY = start.front().getY();
const int ONED = 0, TWOV = 1, TWODR = 2, TWODL = 3, THREED = 4, THREEL = 5, THREER = 6, FOUR = 7;
switch(temp)
{
case ONED:
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = true;
else
up = !checkUp2(posX-2, posY);
if(posY-1 < 0)
left = true;
else
left = !checkLeft2(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = true;
else
right = !checkRight2(posX-1, posY+1);
if(up && left && right)
{
if(room)
pushRoom(posX-1, posY, roomoneD, room);
else
pushCor(posX-1, posY, oneD, room);
}else
assignUp(room);
break;
}
case TWOV:
{
//check for available position above where this piece is placed
if(posX - 2 < 0)
{
//can't push assign a new piece
assignUp(room);
break;
}else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = false;
else
up = checkUp(posX-2, posY);
if(posY-1 < 0)
left = true;
else
left = !checkLeft2(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = true;
else
right = !checkRight2(posX-1, posY+1);
//check for compatibility
if(up && left && right)
{
//create a twoV corridor to push
if(room)
pushRoom(posX-1, posY, roomtwoV, room);
else
pushCor(posX-1, posY, twoV, room);
}else
assignUp(room);
}
break;
}
case TWODR:
{
//check right for availability
if((posY+1) > LIMIT-1)
{
//can't push right, assign a new piece
assignUp(room);
break;
}else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = true;
else
up = !checkUp2(posX-2, posY);
if(posY-1 < 0)
left = true;
else
left = !checkLeft2(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = false;
else
right = checkRight(posX-1, posY+1);
//check for existing areas for compatibility
if(up && left && right)
{
if(room)
pushRoom(posX-1, posY, roomtwoDR, room);
else
pushCor(posX-1, posY, twoDR, room);
}else
assignUp(room);
}
break;
}
case TWODL:
{
//Check left for availability
if((posY-1) < 0)
{
//can't assign left, assign a new piece
assignUp(room);
break;
}else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = true;
else
up = !checkUp2(posX-2, posY);
if(posY-1 < 0)
left = false;
else
left = checkLeft(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = true;
else
right = !checkRight2(posX-1, posY+1);
//check existing areas for compatibility
if(up && left && right)
{
//push twoDL corridor to the queue
if(room)
pushRoom(posX-1, posY, roomtwoDL, room);
else
pushCor(posX-1, posY, twoDL, room);
}else
assignUp(room);
}
break;
}
case THREED:
{
//check left and right for edges
if((posY - 1) < 0)
{
//can't assign left, assign a new piece
assignUp(room);
break;
}
else if(posY +1 > LIMIT)
{
//can't assign right, assign a new piece
assignUp(room);
break;
}
else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = true;
else
up = !checkUp2(posX-2, posY);
if(posY-1 < 0)
left = false;
else
left = checkLeft(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = false;
else
right = checkRight(posX-1, posY+1);
//check for existing areas for compatibility
if( up && left && right)
{
//push threeD corridor onto the queue
if(room)
pushRoom(posX-1, posY, roomthreeD, room);
else
pushCor(posX-1, posY, threeD, room);
}else
assignUp(room);
}
break;
}
case THREEL:
{
//check left and top
if((posY-1) < 0)
{
//can't assign left, assign a new piece
assignUp(room);
break;
}
if((posX-2) < 0)
{
assignUp(room);
break;
}
else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = false;
else
up = checkUp(posX-2, posY);
if(posY-1 < 0)
left = false;
else
left = checkLeft(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = true;
else
right = !checkRight2(posX-1, posY+1);
//check existing areas
if(up && left && right)
{
if(room)
pushRoom(posX-1, posY, roomthreeL, room);
else
pushCor(posX-1, posY, threeL, room);
break;
}else
assignUp(room);
}
break;
}
case THREER:
{
//check top and right
if((posX-2) < 0)
{
assignUp(room);
break;
}else if(posY + 1 > LIMIT-1)
{
assignUp(room);
break;
}else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = false;
else
up = checkUp(posX-2, posY);
if(posY-1 < 0)
left = true;
else
left = !checkLeft2(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = false;
else
right = checkRight(posX-1, posY+1);
//check top and right for compatibility
if(up && left && right)
{
//push threeR corridor onto the queue
if(room)
pushRoom(posX-1, posY, roomthreeR, room);
else
pushCor(posX-1, posY, threeR, room);
break;
}else
assignUp(room);
}
break;
}
case FOUR:
{
//check up, left and right
if(posY -1 < 0)
{
assignUp(room);
break;
}else if(posY+1 > LIMIT-1)
{
assignUp(room);
break;
}else if(posX-2 < 0)
{
assignUp(room);
break;
}else
{
//create temp variables to store checks
bool up, left, right;
//determine whether or not to check for up, left, right due to limits
if(posX-2 < 0)
up = false;
else
up = checkUp(posX-2, posY);
if(posY-1 < 0)
left = false;
else
left = checkLeft(posX-1, posY-1);
if(posY+1 > LIMIT-1)
right = false;
else
right = checkRight(posX-1, posY+1);
if(up && left && right)
{
if(room)
pushRoom(posX-1, posY, roomfour, room);
else
pushCor(posX-1, posY, four, room);
}else
assignUp(room);
}
break;
}
}//end switch
}
void FloorGenerator::assignRight(bool room)
{
int temp = rand() % 8;
int posX = start.front().getX();
int posY = start.front().getY();
const int ONEL = 0, TWOH = 1, TWOUL= 2, TWODL = 3, THREEU = 4, THREED = 5, THREEL = 6, FOUR = 7;
switch(temp)
{
case ONEL:
{
bool up, down, right;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = true;
else
right = !checkRight2(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomoneL, room);
else
pushCor(posX, posY+1, oneL, room);
}else
assignRight(room);
break;
}
case TWOH:
{
if(posY+2 > LIMIT-1)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = false;
else
right = checkRight(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomtwoH, room);
else
pushCor(posX, posY+1, twoH, room);
}else
assignRight(room);
}
break;
}
case TWOUL:
{
if(posX-1 < 0)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = true;
else
right = !checkRight2(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomtwoUL, room);
else
pushCor(posX, posY+1, twoUL, room);
}else
assignRight(room);
}
break;
}
case TWODL:
{
if(posX+1 > LIMIT-1)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = true;
else
right = !checkRight2(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomtwoDL, room);
else
pushCor(posX, posY+1, twoDL, room);
}else
assignRight(room);
}
break;
}
case THREEU:
{
if(posX-1 < 0)
{
assignRight(room);
break;
}else if(posY+2 > LIMIT-1)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = false;
else
right = checkRight(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomthreeU, room);
else
pushCor(posX, posY+1, threeU, room);
}else
assignRight(room);
}
break;
}
case THREED:
{
if(posX+1 > LIMIT-1)
{
assignRight(room);
break;
}else if(posY+2 > LIMIT-1)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = false;
else
right = checkRight(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomthreeD, room);
else
pushCor(posX, posY+1, threeD, room);
}else
assignRight(room);
}
break;
}
case THREEL:
{
if(posX+1 > LIMIT-1)
{
assignRight(room);
break;
}else if(posX-1 < 0)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = true;
else
right = !checkRight2(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomthreeL, room);
else
pushCor(posX, posY+1, threeL, room);
}else
assignRight(room);
}
break;
}
case FOUR:
{
if(posX + 1 > LIMIT-1)
{
assignRight(room);
break;
}else if(posX -1 < 0)
{
assignRight(room);
break;
}else if(posY+2 > LIMIT-1)
{
assignRight(room);
break;
}else
{
bool up, down, right;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY+1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY+1);
if(posY+2 > LIMIT-1)
right = false;
else
right = checkRight(posX, posY+2);
if(up && down && right)
{
if(room)
pushRoom(posX, posY+1, roomfour, room);
else
pushCor(posX, posY+1, four, room);
}else
assignRight(room);
}
break;
}
}
}
void FloorGenerator::assignLeft(bool room)
{
int temp = rand() % 8;
int posX = start.front().getX();
int posY = start.front().getY();
const int ONER = 0, TWOH = 1, TWOUR= 2, TWODR = 3, THREEU = 4, THREED = 5, THREER = 6, FOUR = 7;
switch(temp)
{
case ONER:
{
bool up, down, left;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY-1);
if(posY-2 < 0)
left = true;
else
left = !checkLeft2(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomoneR, room);
else
pushCor(posX, posY-1, oneR, room);
}else
assignLeft(room);
break;
}
case TWOH:
{
if(posY-2 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY-1);
if(posY-2 < 0)
left = false;
else
left = checkLeft(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomtwoH, room);
else
pushCor(posX, posY-1, twoH, room);
}else
assignLeft(room);
}
break;
}
case TWOUR:
{
if(posX-1 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY-1);
if(posY-2 < 0)
left = true;
else
left = !checkLeft2(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomtwoUR, room);
else
pushCor(posX, posY-1, twoUR, room);
}else
assignLeft(room);
}
break;
}
case TWODR:
{
if(posX+1 > LIMIT-1)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY-1);
if(posY-2 < 0)
left = true;
else
left = !checkLeft2(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomtwoDR, room);
else
pushCor(posX, posY-1, twoDR, room);
}else
assignLeft(room);
}
break;
}
case THREEU:
{
if(posX-1 < 0)
{
assignLeft(room);
break;
}else if(posY-2 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = true;
else
down = !checkDown2(posX+1, posY-1);
if(posY-2 < 0)
left = false;
else
left = checkLeft(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomthreeU, room);
else
pushCor(posX, posY-1, threeU, room);
}else
assignLeft(room);
}
break;
}
case THREED:
{
if(posX+1 > LIMIT-1)
{
assignLeft(room);
break;
}else if(posY-2 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = true;
else
up = !checkUp2(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY-1);
if(posY-2 < 0)
left = false;
else
left = checkLeft(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomthreeD, room);
else
pushCor(posX, posY-1, threeD, room);
}else
assignLeft(room);
}
break;
}
case THREER:
{
if(posX+1 > LIMIT-1)
{
assignLeft(room);
break;
}else if(posX-1 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY-1);
if(posY-2 < 0)
left = true;
else
left = !checkLeft2(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomthreeR, room);
else
pushCor(posX, posY-1, threeR, room);
}else
assignLeft(room);
}
break;
}
case FOUR:
{
if(posX+1 > LIMIT-1)
{
assignLeft(room);
break;
}else if(posX-1 < 0)
{
assignLeft(room);
break;
}else if(posY-2 < 0)
{
assignLeft(room);
break;
}else
{
bool up, down, left;
if(posX-1 < 0)
up = false;
else
up = checkUp(posX-1, posY-1);
if(posX+1 > LIMIT-1)
down = false;
else
down = checkDown(posX+1, posY-1);
if(posY-2 < 0)
left = false;
else
left = checkLeft(posX, posY-2);
if(up && down && left)
{
if(room)
pushRoom(posX, posY-1, roomfour, room);
else
pushCor(posX, posY-1, four, room);
}else
assignLeft(room);
}
break;
}
}
}
