int
scsi_is_ready(struct disk_op_s *op)
{
dprintf(6, "scsi_is_ready (drive=%p)\n", op->drive_g);
/* Retry TEST UNIT READY for 5 seconds unless MEDIUM NOT PRESENT is
* reported by the device. If the device reports "IN PROGRESS",
* 30 seconds is added. */
int in_progress = 0;
u64 end = calc_future_tsc(5000);
for (;;) {
if (check_tsc(end)) {
dprintf(1, "test unit ready failed\n");
return -1;
}
int ret = cdb_test_unit_ready(op);
if (!ret)
// Success
break;
struct cdbres_request_sense sense;
ret = cdb_get_sense(op, &sense);
if (ret)
// Error - retry.
continue;
// Sense succeeded.
if (sense.asc == 0x3a) { /* MEDIUM NOT PRESENT */
dprintf(1, "Device reports MEDIUM NOT PRESENT\n");
return -1;
}
if (sense.asc == 0x04 && sense.ascq == 0x01 && !in_progress) {
/* IN PROGRESS OF BECOMING READY */
printf("Waiting for device to detect medium... ");
/* Allow 30 seconds more */
end = calc_future_tsc(30000);
in_progress = 1;
}
}
return 0;
}
// Reset device on port
static int
usb_hub_reset(struct usbhub_s *hub, u32 port)
{
int ret = set_port_feature(hub, port, USB_PORT_FEAT_RESET);
if (ret)
goto fail;
// Wait for reset to complete.
struct usb_port_status sts;
u64 end = calc_future_tsc(USB_TIME_DRST * 2);
for (;;) {
ret = get_port_status(hub, port, &sts);
if (ret)
goto fail;
if (!(sts.wPortStatus & USB_PORT_STAT_RESET))
break;
if (check_tsc(end)) {
warn_timeout();
goto fail;
}
msleep(5);
}
// Reset complete.
if (!(sts.wPortStatus & USB_PORT_STAT_CONNECTION))
// Device no longer present
return -1;
return ((sts.wPortStatus & USB_PORT_STAT_SPEED_MASK)
>> USB_PORT_STAT_SPEED_SHIFT);
fail:
dprintf(1, "Failure on hub port %d reset\n", port);
usb_hub_disconnect(hub, port);
return -1;
}
static void
configure_ehci(void *data)
{
struct usb_ehci_s *cntl = data;
// Allocate ram for schedule storage
struct ehci_framelist *fl = memalign_high(sizeof(*fl), sizeof(*fl));
struct ehci_qh *intr_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*intr_qh));
struct ehci_qh *async_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*async_qh));
if (!fl || !intr_qh || !async_qh) {
warn_noalloc();
goto fail;
}
// XXX - check for halted?
// Reset the HC
u32 cmd = readl(&cntl->regs->usbcmd);
writel(&cntl->regs->usbcmd, (cmd & ~(CMD_ASE | CMD_PSE)) | CMD_HCRESET);
u64 end = calc_future_tsc(250);
for (;;) {
cmd = readl(&cntl->regs->usbcmd);
if (!(cmd & CMD_HCRESET))
break;
if (check_tsc(end)) {
warn_timeout();
goto fail;
}
yield();
}
// Disable interrupts (just to be safe).
writel(&cntl->regs->usbintr, 0);
// Set schedule to point to primary intr queue head
memset(intr_qh, 0, sizeof(*intr_qh));
intr_qh->next = EHCI_PTR_TERM;
intr_qh->info2 = (0x01 << QH_SMASK_SHIFT);
intr_qh->token = QTD_STS_HALT;
intr_qh->qtd_next = intr_qh->alt_next = EHCI_PTR_TERM;
int i;
for (i=0; i<ARRAY_SIZE(fl->links); i++)
fl->links[i] = (u32)intr_qh | EHCI_PTR_QH;
writel(&cntl->regs->periodiclistbase, (u32)fl);
// Set async list to point to primary async queue head
memset(async_qh, 0, sizeof(*async_qh));
async_qh->next = (u32)async_qh | EHCI_PTR_QH;
async_qh->info1 = QH_HEAD;
async_qh->token = QTD_STS_HALT;
async_qh->qtd_next = async_qh->alt_next = EHCI_PTR_TERM;
cntl->async_qh = async_qh;
writel(&cntl->regs->asynclistbase, (u32)async_qh);
// Enable queues
writel(&cntl->regs->usbcmd, cmd | CMD_ASE | CMD_PSE | CMD_RUN);
// Set default of high speed for root hub.
writel(&cntl->regs->configflag, 1);
cntl->checkports = readl(&cntl->caps->hcsparams) & HCS_N_PORTS_MASK;
// Find devices
int count = check_ehci_ports(cntl);
ehci_free_pipes(cntl);
if (count)
// Success
return;
// No devices found - shutdown and free controller.
writel(&cntl->regs->usbcmd, cmd & ~CMD_RUN);
msleep(4); // 2ms to stop reading memory - XXX
fail:
free(fl);
free(intr_qh);
free(async_qh);
free(cntl);
}
