void init_Display_Start(void){
_delay_ms(10);
init_Sub_Function();
_delay_ms(5);
init_Sub_Function();
_delay_us(200);
init_Sub_Function();
_delay_ms(10);
function_Set();
display_ON();
clear_Display();
entry_Mode();
}
void init_LCD(void){
static const gpio_map_t DIP204_SPI_GPIO_MAP =
{
{DIP204_SPI_SCK_PIN, DIP204_SPI_SCK_FUNCTION }, // SPI Clock.
{DIP204_SPI_MISO_PIN, DIP204_SPI_MISO_FUNCTION}, // MISO.
{DIP204_SPI_MOSI_PIN, DIP204_SPI_MOSI_FUNCTION}, // MOSI.
{DIP204_SPI_NPCS_PIN, DIP204_SPI_NPCS_FUNCTION} // Chip Select NPCS.
};
spi_options_t spiOptions =
{
.reg = DIP204_SPI_NPCS,
.baudrate = 1000000,
.bits = 8,
.spck_delay = 0,
.trans_delay = 0,
.stay_act = 1,
.spi_mode = 0,
.modfdis = 1
};
gpio_enable_module(DIP204_SPI_GPIO_MAP,
sizeof(DIP204_SPI_GPIO_MAP) / sizeof(DIP204_SPI_GPIO_MAP[0]));
spi_initMaster(DIP204_SPI, &spiOptions);
spi_selectionMode(DIP204_SPI, 0, 0, 0);
spi_enable(DIP204_SPI);
spi_setupChipReg(DIP204_SPI, &spiOptions, FOSC0);
dip204_init(backlight_PWM, true);
clear_Display();
dip204_hide_cursor();
}
void init_Potentiometer(void){
const gpio_map_t ADC_GPIO_MAP = {
{EXAMPLE_ADC_POTENTIOMETER_PIN, EXAMPLE_ADC_POTENTIOMETER_FUNCTION}
};
gpio_enable_module(ADC_GPIO_MAP, sizeof(ADC_GPIO_MAP) /
sizeof(ADC_GPIO_MAP[0]));
AVR32_ADC.mr |= 0x1 << AVR32_ADC_MR_PRESCAL_OFFSET;
adc_configure(&AVR32_ADC);
adc_enable(&AVR32_ADC, EXAMPLE_ADC_POTENTIOMETER_CHANNEL);
adc_start(&AVR32_ADC);
}
void init_CurrentSensor(void){
#define AVR32_ADC_AD_1_PIN 22
const gpio_map_t ADC_GPIO_MAP = {
{AVR32_ADC_AD_3_PIN, AVR32_ADC_AD_3_FUNCTION}
};
gpio_enable_module(ADC_GPIO_MAP, sizeof(ADC_GPIO_MAP) /
sizeof(ADC_GPIO_MAP[0]));
AVR32_ADC.mr |= 0x1 << AVR32_ADC_MR_PRESCAL_OFFSET;
adc_configure(&AVR32_ADC);
adc_enable(&AVR32_ADC, 3);
adc_start(&AVR32_ADC);
}
void clear_Line(int line){
for(int i = 0; i<21;i++){
dip204_set_cursor_position(i,line);
dip204_write_string(" ");
}
}
void set_Direccion(int direccion){
if(direccion == 1){
clear_Line(2);
dip204_set_cursor_position(1,2);
dip204_write_string("Direccion:");
dip204_set_cursor_position(12,2);
dip204_write_string("Forward");
}
if(direccion == 0){
clear_Line(2);
dip204_set_cursor_position(1,2);
dip204_write_string("Direccion:");
dip204_set_cursor_position(12,2);
dip204_write_string("Reverse");
}
}
void set_Velocidad(int velocidad){
clear_Line(3);
dip204_set_cursor_position(1,3);
dip204_write_string("Velocidad:");
dip204_set_cursor_position(12,3);
switch (velocidad){
case 1:
dip204_write_string("1");
break;
case 2:
dip204_write_string("2");
break;
case 3:
dip204_write_string("3");
break;
case 4:
dip204_write_string("4");
break;
case 5:
dip204_write_string("5");
break;
case 6:
dip204_write_string("6");
break;
case 7:
dip204_write_string("7");
break;
case 8:
dip204_write_string("8");
break;
case 9:
dip204_write_string("9");
break;
case 10:
dip204_write_string("10");
break;
}//SWITCH
}
