int main_loop_interactive(struct mode *mode, char *confname)
{
struct cli_def *cli;
cli = cli_init();
cli_set_banner(cli, "libcli test environment");
cli_set_hostname(cli, "router");
// cli_telnet_protocol(cli, 1);
cli_done(cli);
return 0;
}
int jemCLIinit(void)
{
int on = 1;
cli = cli_init();
cli_set_banner(cli, "Jem/JVM Command Line Interface");
cli_set_hostname(cli, "Jem/JVM");
cli_register_command(cli, NULL, "uptime", cmdUptime, PRIVILEGE_UNPRIVILEGED,
MODE_EXEC, "Display uptime.");
if ((socketFD = socket(AF_INET, SOCK_STREAM, 0)) < 0) {
printf("Socket creation error for CLI, result=%d.\n", errno);
return errno;
}
setsockopt(socketFD, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
memset(&serverAddr, 0, sizeof(serverAddr));
serverAddr.sin_family = AF_INET;
serverAddr.sin_addr.s_addr = htonl(INADDR_ANY);
int cliPort = getIntVal((char *) "CLIPORT");
if (cliPort == 0) cliPort = 8181;
serverAddr.sin_port = htons(cliPort);
if (bind(socketFD, (struct sockaddr *)&serverAddr, sizeof(serverAddr)) < 0) {
printf("Socket bind error for CLI, result=%d.\n", errno);
return errno;
}
if (listen(socketFD, 50) < 0) {
printf("Socket listen error for CLI, result=%d.\n", errno);
return errno;
}
int result = rt_task_create(&cliTask,"cliTask",0,1,T_FPU|T_JOINABLE);
if (result) {
printf("Failed to create cli task, code=%d \n", result);
return -1;
}
result = rt_task_start(&cliTask,&commandTask,NULL);
if (result) {
printf("Failed to start cli task, code=%d \n", result);
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
struct cli_command *c;
struct cli_def *cli;
cli = cli_init();
cli_set_banner(cli, "libcli test environment");
cli_set_hostname(cli, "router");
cli_set_newline(cli, "\n");
cli_register_command(cli, NULL, "test", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "sex", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "simple", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "simon", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "set", cmd_set, PRIVILEGE_PRIVILEGED, MODE_EXEC, NULL);
c = cli_register_command(cli, NULL, "show", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, c, "counters", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show the counters that the system uses");
cli_register_command(cli, c, "junk", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "interface", cmd_config_int, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Configure an interface");
cli_register_command(cli, NULL, "exit", cmd_config_int_exit, PRIVILEGE_PRIVILEGED, MODE_CONFIG_INT, "Exit from interface configuration");
cli_register_command(cli, NULL, "address", cmd_test, PRIVILEGE_PRIVILEGED, MODE_CONFIG_INT, "Set IP address");
//cli_set_auth_callback(cli, check_auth);
//cli_set_enable_callback(cli, check_enable);
// Test reading from a file
{
FILE *fh;
if ((fh = fopen("clitest.txt", "r")))
{
// This sets a callback which just displays the cli_print() text to stdout
cli_print_callback(cli, pc);
cli_file(cli, fh, PRIVILEGE_UNPRIVILEGED, MODE_EXEC);
cli_print_callback(cli, NULL);
fclose(fh);
}
}
set_canonical(0);
cli_loop(cli, fileno(stdin), fileno(stdout));
set_canonical(1);
cli_done(cli);
return 0;
}
int cli(void)
{
struct sockaddr_in servaddr;
struct cli_command
*address,
*clear,
*debug,
*eth_frame,
*frame,
*ip_packet,
*ip_int,
*launch,
*mac_packet,
*macaddr,
*mac_int,
*pld,
*port,
*reset,
*run,
*show,
*tag,
*tcp_packet,
*udp_packet;
struct cli_def *cli;
int on = 1, x, s, cnt=0;
int i;
char TimeStamp[128];
(void) signal(SIGINT, clean_up); // to close and free everything upon SIGINT
// Must be called first to setup data structures
cli = cli_init();
gcli = cli;
// Set the hostname (shown in the the prompt)
cli_set_hostname(cli, "mz");
// Set the greeting
cli_set_banner(cli, "mausezahn " VERSION_LONG);
// Enable usernames and passwords
cli_allow_user(cli, mz_username, mz_password);
cli_allow_enable(cli, mz_enable);
// Initialize MOPS
mp_head = mops_init(); // now mp_head points to the head of the doubly linked list
// Initialize packet sequences list
packet_sequences = mz_ll_create_new_element(NULL);
mops_rx_arp();
lookupdev();
for (i=0; i<device_list_entries; i++) {
get_dev_params(device_list[i].dev);
}
// Initialize sequence list
// **************** THE MAIN CLI COMMANDS ****************
// ---- DEBUG MODE: ----
debug = cli_register_command(cli, NULL, "debug", NULL, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Enter debug mode");
cli_register_command(cli, debug, "packet", debug_packet, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Debug packet processing");
cli_register_command(cli, debug, "all", debug_all, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Debug all (beware!)");
// ---- INTERFACE MODE COMMANDS: ---- (these are defaults for the 'device defaults' command)
cli_register_command(cli, NULL, "interface", enter_interface, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Enter interface configuration mode");
ip_int = cli_register_command(cli, NULL, "ip", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure interface IP address");
cli_register_command(cli, ip_int, "address", conf_ip_address, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure interface IP address");
mac_int= cli_register_command(cli, NULL, "mac", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure interface MAC address");
cli_register_command(cli, mac_int, "address", conf_mac_address, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure interface MAC address");
tag = cli_register_command(cli, NULL, "tag", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure tags");
cli_register_command(cli, tag, "dot1q", conf_tag_dot1q, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure 802.1Q and 802.1P parameters");
cli_register_command(cli, tag, "mpls", conf_tag_mpls, PRIVILEGE_PRIVILEGED, MZ_MODE_INTERFACE, "Configure mpls label stack");
// ---- VARIOUS CONFIG MODE COMMANDS : ----
frame = cli_register_command(cli, NULL, "frame", NULL, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Configure global frame settings");
cli_register_command(cli, frame, "limit", conf_frame_limit, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Configure frame size limits");
cli_register_command(cli, NULL, "sequence", conf_sequence, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Configure a sequence of packets");
// ---- PACKET CONFIG MODE COMMANDS: ----
cli_register_command(cli, NULL, "packet", enter_packet, PRIVILEGE_PRIVILEGED, MODE_CONFIG, "Enter packet configuration mode");
cli_register_command(cli, NULL, "clone", cmd_packet_clone, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Clone from another packet");
cli_register_command(cli, NULL, "name", cmd_packet_name, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Assign a unique name");
cli_register_command(cli, NULL, "description", cmd_packet_description, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Assign a packet description text");
cli_register_command(cli, NULL, "bind", cmd_packet_bind, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Select the network interface");
cli_register_command(cli, NULL, "count", cmd_packet_count, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the packet count value");
cli_register_command(cli, NULL, "delay", cmd_packet_delay, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the inter-packet delay");
cli_register_command(cli, NULL, "interval", cmd_packet_interval, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a greater interval");
cli_register_command(cli, NULL, "type", cmd_packet_type, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Specify packet type");
mac_packet = cli_register_command(cli, NULL, "mac", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's MAC addresses");
address = cli_register_command(cli, mac_packet, "address", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's source IP address");
cli_register_command(cli, address, "source", cmd_packet_mac_address_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's source MAC addresses");
cli_register_command(cli, address, "destination", cmd_packet_mac_address_destination, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's destination MAC addresses");
tag = cli_register_command(cli, NULL, "tag", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure tags");
cli_register_command(cli, tag, "dot1q", cmd_packet_dot1q, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure 802.1Q (and 802.1P) parameters");
cli_register_command(cli, tag, "mpls", cmd_packet_mpls, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure MPLS label stack");
pld = cli_register_command(cli, NULL, "payload", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a payload");
cli_register_command(cli, pld, "hex", cmd_packet_payload_hex, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a payload in hexadecimal format");
cli_register_command(cli, pld, "ascii", cmd_packet_payload_ascii, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a payload in ascii format");
cli_register_command(cli, pld, "raw", cmd_packet_payload_raw, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a raw payload (whole file as it is)");
port = cli_register_command(cli, NULL, "port", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's port numbers");
cli_register_command(cli, port, "source", cmd_port_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's source port number");
cli_register_command(cli, port, "destination", cmd_port_destination, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's destination port number");
cli_register_command(cli, NULL, "end", cmd_packet_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "End packet configuration mode");
// ---------- Ethernet related (for all packets that have Ethernet or LLC/SNAP as link layer)
eth_frame = cli_register_command(cli, NULL, "ethernet", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure frame's Ethernet, 802.2, 802.3, or SNAP settings");
macaddr = cli_register_command(cli, eth_frame, "address", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure frame's source or destination MAC address");
cli_register_command(cli, macaddr, "source", cmd_packet_mac_address_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure frame's source MAC addresses");
cli_register_command(cli, macaddr, "destination", cmd_packet_mac_address_destination, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure frame's destination MAC addresses");
cli_register_command(cli, eth_frame, "type", cmd_eth_type, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure Ethernet's type field");
cli_register_command(cli, eth_frame, "length", cmd_eth_length, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure IEEE 802.3 length field");
cli_register_command(cli, eth_frame, "llc", cmd_eth_llc, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the IEEE 802.2 field");
cli_register_command(cli, eth_frame, "snap", cmd_eth_snap, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the IEEE 802.2 field");
// ---------- IP related (for all packets that have IPv4 as network layer)
ip_packet = cli_register_command(cli, NULL, "ip", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's IP settings");
address = cli_register_command(cli, ip_packet, "address", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's source or destination IP address");
cli_register_command(cli, address, "source", cmd_ip_address_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's source IP address");
cli_register_command(cli, address, "destination", cmd_ip_address_destination, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's destination IP address");
cli_register_command(cli, ip_packet, "version", cmd_ip_version, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure version field in IPv4 header");
cli_register_command(cli, ip_packet, "ttl", cmd_ip_ttl, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure TTL field in IPv4 header");
cli_register_command(cli, ip_packet, "protocol", cmd_ip_protocol, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure protocol field in IPv4 header");
cli_register_command(cli, ip_packet, "hlen", cmd_ip_hlen, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure header-length (aka IHL) field in IPv4 header");
cli_register_command(cli, ip_packet, "length", cmd_ip_len, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure length field in IPv4 header");
cli_register_command(cli, ip_packet, "identification", cmd_ip_id, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure identification field in IPv4 header");
cli_register_command(cli, ip_packet, "offset", cmd_ip_offset, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure fragment offset field in IPv4 header");
cli_register_command(cli, ip_packet, "checksum", cmd_ip_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure checksum field in IPv4 header");
cli_register_command(cli, ip_packet, "tos", cmd_ip_tos, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure type-of-service (ToS) field in IPv4 header");
cli_register_command(cli, ip_packet, "dscp", cmd_ip_dscp, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the ToS as DSCP field in IPv4 header");
cli_register_command(cli, ip_packet, "reserved", cmd_ip_rsv, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the reserved flag in IPv4 header");
cli_register_command(cli, ip_packet, "dont-fragment", cmd_ip_df, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the don't fragment flag in IPv4 header");
cli_register_command(cli, ip_packet, "more-fragments", cmd_ip_mf, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the more fragments flag in IPv4 header");
cli_register_command(cli, ip_packet, "fragment-size", cmd_ip_fragsize, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the fragment size to enable fragmentation");
cli_register_command(cli, ip_packet, "fragment-overlap", cmd_ip_fragoverlap, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a fragmentation overlap");
cli_register_command(cli, ip_packet, "option", cmd_ip_option, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure IPv4 options");
cli_register_command(cli, ip_packet, "auto-delivery", cmd_ip_delivery, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Enable or disable IP auto-delivery");
// --------- IP commands:
cli_register_command(cli, NULL, "version", cmd_ip_version, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP version (default: 4)");
cli_register_command(cli, NULL, "ttl", cmd_ip_ttl, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the TTL (default: 255)");
cli_register_command(cli, NULL, "source-address", cmd_ip_address_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the source IP address");
cli_register_command(cli, NULL, "destination-address", cmd_ip_address_destination, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the destination IP address");
cli_register_command(cli, NULL, "protocol", cmd_ip_protocol, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP protocol");
cli_register_command(cli, NULL, "hlen", cmd_ip_hlen, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP header length");
cli_register_command(cli, NULL, "len", cmd_ip_len, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP packet length");
cli_register_command(cli, NULL, "identification", cmd_ip_id, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP identification");
cli_register_command(cli, NULL, "offset", cmd_ip_offset, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the fragment offset");
cli_register_command(cli, NULL, "sum", cmd_ip_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the IP header checksum");
cli_register_command(cli, NULL, "tos", cmd_ip_tos, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the Type of Service");
cli_register_command(cli, NULL, "dscp", cmd_ip_dscp, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Specify the DSCP");
cli_register_command(cli, NULL, "reserved", cmd_ip_rsv, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Set or unset the reserved bit");
cli_register_command(cli, NULL, "df", cmd_ip_df, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Set or unset the Don't Fragment (DF) bit");
cli_register_command(cli, NULL, "mf", cmd_ip_mf, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Set or unset the More Fragments (MF) bit");
cli_register_command(cli, NULL, "fragment-size", cmd_ip_fragsize, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Configure the fragment size to enable fragmentation");
cli_register_command(cli, NULL, "fragment-overlap", cmd_ip_fragoverlap, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Configure a fragmentation overlap");
cli_register_command(cli, NULL, "option", cmd_ip_option, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Configure an IP option");
cli_register_command(cli, NULL, "auto-delivery", cmd_ip_delivery, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "Enable or disable IP auto-delivery");
cli_register_command(cli, NULL, "end", cmd_ip_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IP, "End IP configuration mode");
// ---------- UDP related (for all packets that have UDP as transport layer)
udp_packet = cli_register_command(cli, NULL, "udp", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's UDP header parameters");
cli_register_command(cli, udp_packet, "checksum", cmd_udp_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the UDP checksum");
cli_register_command(cli, udp_packet, "length", cmd_udp_len, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the UDP length field");
// ---------- UDP commands:
cli_register_command(cli, NULL, "checksum", cmd_udp_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_UDP, "Configure the UDP checksum");
cli_register_command(cli, NULL, "length", cmd_udp_len, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_UDP, "Configure the UDP length field");
cli_register_command(cli, NULL, "end", cmd_udp_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_UDP, "End UDP configuration mode");
// ---------- TCP related (for all packets that have TCP as transport layer)
tcp_packet = cli_register_command(cli, NULL, "tcp", NULL, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure packet's TCP header parameters");
cli_register_command(cli, tcp_packet, "seqnr", cmd_tcp_seqnr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP sequence number");
cli_register_command(cli, tcp_packet, "acknr", cmd_tcp_acknr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP acknowledgement number");
cli_register_command(cli, tcp_packet, "hlen", cmd_tcp_offset, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP header length");
cli_register_command(cli, tcp_packet, "reserved", cmd_tcp_res, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP reserved field");
cli_register_command(cli, tcp_packet, "flags", cmd_tcp_flags, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure a combination of TCP flags at once");
cli_register_command(cli, tcp_packet, "cwr", cmd_tcp_cwr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Set or unset the TCP CWR flag");
cli_register_command(cli, tcp_packet, "ece", cmd_tcp_ece, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Set or unset the TCP ECE flag");
cli_register_command(cli, tcp_packet, "urg", cmd_tcp_urg, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Set or unset the TCP URG flag");
cli_register_command(cli, tcp_packet, "ack", cmd_tcp_ack, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "set or unset the TCP ACK flag");
cli_register_command(cli, tcp_packet, "psh", cmd_tcp_psh, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "set or unset the TCP PSH flag");
cli_register_command(cli, tcp_packet, "rst", cmd_tcp_rst, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "set or unset the TCP RST flag");
cli_register_command(cli, tcp_packet, "syn", cmd_tcp_syn, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "set or unset the TCP SYN flag");
cli_register_command(cli, tcp_packet, "fin", cmd_tcp_fin, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "set or unset the TCP FIN flag");
cli_register_command(cli, tcp_packet, "window", cmd_tcp_window, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP window size");
cli_register_command(cli, tcp_packet, "checksum", cmd_tcp_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP checksum");
cli_register_command(cli, tcp_packet, "urgent-pointer", cmd_tcp_urgptr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure the TCP urgend pointer");
cli_register_command(cli, tcp_packet, "options", cmd_tcp_options, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET, "Configure TCP options");
// ---------- TCP commands:
cli_register_command(cli, NULL, "seqnr", cmd_tcp_seqnr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP sequence number");
cli_register_command(cli, NULL, "acknr", cmd_tcp_acknr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP acknowledgement number");
cli_register_command(cli, NULL, "hlen", cmd_tcp_offset, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP header length");
cli_register_command(cli, NULL, "reserved", cmd_tcp_res, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP reserved field");
cli_register_command(cli, NULL, "flags", cmd_tcp_flags, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure a combination of TCP flags at once");
cli_register_command(cli, NULL, "cwr", cmd_tcp_cwr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Set or unset the TCP CWR flag");
cli_register_command(cli, NULL, "ece", cmd_tcp_ece, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Set or unset the TCP ECE flag");
cli_register_command(cli, NULL, "urg", cmd_tcp_urg, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Set or unset the TCP URG flag");
cli_register_command(cli, NULL, "ack", cmd_tcp_ack, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "set or unset the TCP ACK flag");
cli_register_command(cli, NULL, "psh", cmd_tcp_psh, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "set or unset the TCP PSH flag");
cli_register_command(cli, NULL, "rst", cmd_tcp_rst, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "set or unset the TCP RST flag");
cli_register_command(cli, NULL, "syn", cmd_tcp_syn, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "set or unset the TCP SYN flag");
cli_register_command(cli, NULL, "fin", cmd_tcp_fin, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "set or unset the TCP FIN flag");
cli_register_command(cli, NULL, "window", cmd_tcp_window, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP window size");
cli_register_command(cli, NULL, "checksum", cmd_tcp_sum, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP checksum");
cli_register_command(cli, NULL, "urgent-pointer", cmd_tcp_urgptr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure the TCP urgend pointer");
cli_register_command(cli, NULL, "options", cmd_tcp_options, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "Configure TCP options");
cli_register_command(cli, NULL, "end", cmd_tcp_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_TCP, "End TCP configuration mode");
// --------- ARP commands:
cli_register_command(cli, NULL, "hardware-type", cmd_arp_hwtype, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the hardware type");
cli_register_command(cli, NULL, "protocol-type", cmd_arp_prtype, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the protocol type");
cli_register_command(cli, NULL, "hw-addr-size", cmd_arp_hwaddrsize, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the hardware address size");
cli_register_command(cli, NULL, "pr-addr-size", cmd_arp_praddrsize, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the protocol address size");
cli_register_command(cli, NULL, "opcode", cmd_arp_opcode, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the ARP opcode");
cli_register_command(cli, NULL, "sender-mac", cmd_arp_smac, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the sender MAC address");
cli_register_command(cli, NULL, "sender-ip", cmd_arp_sip, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the sender IP address");
cli_register_command(cli, NULL, "target-mac", cmd_arp_tmac, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the target MAC address");
cli_register_command(cli, NULL, "target-ip", cmd_arp_tip, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the target IP address");
cli_register_command(cli, NULL, "trailer", cmd_arp_trailer, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "Specify the trailer length");
cli_register_command(cli, NULL, "end", cmd_arp_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_ARP, "End ARP configuration mode");
// --------- BPDU commands:
cli_register_command(cli, NULL, "id", cmd_bpdu_id, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU identifier");
cli_register_command(cli, NULL, "version", cmd_bpdu_version, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU version");
cli_register_command(cli, NULL, "bpdutype", cmd_bpdu_type, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU type");
cli_register_command(cli, NULL, "flags", cmd_bpdu_flags, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU flags");
cli_register_command(cli, NULL, "root-id", cmd_bpdu_rid, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU root identifier");
cli_register_command(cli, NULL, "path-cost", cmd_bpdu_pc, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU root path cost");
cli_register_command(cli, NULL, "bridge-id", cmd_bpdu_bid, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU bridge identifier");
cli_register_command(cli, NULL, "port-id", cmd_bpdu_pid, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU port identifier");
cli_register_command(cli, NULL, "age", cmd_bpdu_age, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU age");
cli_register_command(cli, NULL, "maxage", cmd_bpdu_maxage, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU maxage");
cli_register_command(cli, NULL, "hello-interval", cmd_bpdu_hello, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU hello interval");
cli_register_command(cli, NULL, "forward-delay", cmd_bpdu_fwd, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU forward delay");
cli_register_command(cli, NULL, "mode", cmd_bpdu_mode, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the BPDU mode");
cli_register_command(cli, NULL, "vlan", cmd_bpdu_vlan, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "Specify the vlan for PVST+");
cli_register_command(cli, NULL, "end", cmd_bpdu_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_BPDU, "End BPDU configuration mode");
// --------- IGMP commands:
cli_register_command(cli, NULL, "v2-general-query", cmd_igmpv2_genquery, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv2 general query");
cli_register_command(cli, NULL, "v2-group-specific-query", cmd_igmpv2_specquery, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv2 group-specific query");
cli_register_command(cli, NULL, "v2-report", cmd_igmpv2_report, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv2 membership report");
cli_register_command(cli, NULL, "v2-leave", cmd_igmpv2_leave, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv2 leave group message");
cli_register_command(cli, NULL, "v1-query", cmd_igmpv1_query, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv1 query");
cli_register_command(cli, NULL, "v1-report", cmd_igmpv1_report, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "Create an IGMPv1 membership report");
cli_register_command(cli, NULL, "end", cmd_ip_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_IGMP, "End IGMP configuration mode"); // we reuse cmd_ip_end here!
cli_register_command(cli, NULL, "conformance", cmd_lldp_conformance, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Enable or disable LLDP standard conformance");
cli_register_command(cli, NULL, "chassis-id", cmd_lldp_chassis_id, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure the LLDP Chassis-ID");
cli_register_command(cli, NULL, "port-id", cmd_lldp_port_id, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure the LLDP Port-ID");
cli_register_command(cli, NULL, "ttl", cmd_lldp_ttl, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure the LLDP Time-to-Live");
cli_register_command(cli, NULL, "vlan", cmd_lldp_vlan, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure the LLDP Port VLAN-ID");
cli_register_command(cli, NULL, "generic-tlv", cmd_lldp_opt_tlv, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure a generic LLDP TLV");
cli_register_command(cli, NULL, "bad-tlv", cmd_lldp_opt_tlv_bad, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure a bad TLV for testing purposes");
cli_register_command(cli, NULL, "organisational-tlv", cmd_lldp_opt_org, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Configure an organisational LLDP TLV");
cli_register_command(cli, NULL, "early-end", cmd_lldp_endtlv, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Insert an 'early' End-of-LLDPU TLV");
cli_register_command(cli, NULL, "reset", cmd_lldp_reset, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "Reset the LLDPU to defaults and clear all optional TLVs");
cli_register_command(cli, NULL, "end", cmd_ip_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_LLDP, "End IGMP configuration mode"); // we reuse cmd_ip_end here!
// --------- RTP commands:
cli_register_command(cli, NULL, "version", cmd_rtp_version, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Specify the RTP version (default: 2)");
cli_register_command(cli, NULL, "padding", cmd_rtp_padding, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Set or unset the padding flag (default: 0)");
cli_register_command(cli, NULL, "xten", cmd_rtp_xten, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Set or unset the eXtension flag (default: 0)");
cli_register_command(cli, NULL, "marker", cmd_rtp_marker, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Set or unset the marker flag (default: 0)");
cli_register_command(cli, NULL, "csrc-count", cmd_rtp_cc, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the CSRC count (default: 0)");
cli_register_command(cli, NULL, "csrc-list", cmd_rtp_cclist, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the CSRC list (default: none)");
cli_register_command(cli, NULL, "payload-type", cmd_rtp_pt, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the payload type (default: G.711, A-law, 20 msec)");
cli_register_command(cli, NULL, "sequence-number", cmd_rtp_sqnr, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the sequence number");
cli_register_command(cli, NULL, "timestamp", cmd_rtp_time, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the timestamp");
cli_register_command(cli, NULL, "ssrc", cmd_rtp_ssrc, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure the SSRC (source identifier)");
cli_register_command(cli, NULL, "extension", cmd_rtp_extension, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Configure an extension header");
cli_register_command(cli, NULL, "source", cmd_rtp_source, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "Specify a media source");
cli_register_command(cli, NULL, "end", cmd_ip_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_RTP, "End RTP configuration mode"); // we reuse cmd_ip_end here!
// --------- DNS commands:
cli_register_command(cli, NULL, "ttl", cmd_dns_ttl, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_DNS, "Specify the TTL (default: 0)");
cli_register_command(cli, NULL, "query", cmd_dns_query, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_DNS, "Specify the query");
cli_register_command(cli, NULL, "answer", cmd_dns_answer, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_DNS, "Specify the answer");
cli_register_command(cli, NULL, "end", cmd_dns_end, PRIVILEGE_PRIVILEGED, MZ_MODE_PACKET_DNS, "End DNS configuration mode");
// --------- SEQUENCE COMMANDS
cli_register_command(cli, NULL, "add", sequence_add, PRIVILEGE_PRIVILEGED, MZ_MODE_SEQUENCE, "Add another packet to the current sequence");
cli_register_command(cli, NULL, "delay", sequence_delay, PRIVILEGE_PRIVILEGED, MZ_MODE_SEQUENCE, "Add a delay to the current sequence");
cli_register_command(cli, NULL, "show", sequence_show, PRIVILEGE_PRIVILEGED, MZ_MODE_SEQUENCE, "Show current sequence list");
cli_register_command(cli, NULL, "remove", sequence_remove, PRIVILEGE_PRIVILEGED, MZ_MODE_SEQUENCE, "Remove a packet or delay from the current sequence");
cli_register_command(cli, NULL, "end", cmd_end_to_config, PRIVILEGE_PRIVILEGED, MZ_MODE_SEQUENCE, "End sequence configuration mode");
// ---- BENCHMARK CONFIG MODE COMMANDS: ---
// ---- SCAN CONFIG MODE COMMANDS: ---
// ---- CONTROL COMMANDS: ----
cli_register_command(cli, NULL, "terminate", stop_mausezahn, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Terminate the Mausezahn server");
run = cli_register_command(cli, NULL, "run", NULL, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Run previously configured mops instances or sequences");
cli_register_command(cli, run, "id", cmd_run_id, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Run mops packet(s) by specifying packet identifiers");
cli_register_command(cli, run, "name", cmd_run_name, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Run mops packet(s) by specifying packet names");
cli_register_command(cli, run, "sequence", cmd_run_sequence, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Run a packet sequence");
cli_register_command(cli, run, "all", cmd_run_all, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Run all currently configured mops packet(s)");
cli_register_command(cli, NULL, "tx", transmit, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Send inline configured packet (legacy mode; not recommended)");
cli_register_command(cli, NULL, "stop", cmd_stop, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Stop transmission");
cli_register_command(cli, NULL, "load", cmd_load, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Load commands from a file");
// ---- SET COMMANDS: -----
cli_register_command(cli, NULL, "set", cmd_set, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Set global Mausezahn parameters");
// ---- CLEAR COMMANDS: -----
clear = cli_register_command(cli, NULL, "clear", NULL, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Clear something (use '?')");
cli_register_command(cli, clear, "all", clear_all, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Re-initialize Mausezahn");
cli_register_command(cli, clear, "packet", clear_packet, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Delete a packet (i. e. MOPS entry)");
// ---- SHOW COMMANDS: -----
show = cli_register_command(cli, NULL, "show", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show something (use '?')");
cli_register_command(cli, show, "packet", show_packets, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show defined packets");
// cli_register_command(cli, show, "system", show_system, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show basic system settings");
cli_register_command(cli, show, "interfaces", show_interfaces, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show detailed interface information");
cli_register_command(cli, show, "mops", show_mops, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show MOPS details");
// cli_register_command(cli, show, "processes", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "List all Mausezahn processes");
cli_register_command(cli, show, "set", show_set, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "List general packet parameters");
cli_register_command(cli, show, "arp", show_arp, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Show the advanced Mausezahn ARP table");
// cli_register_command(cli, show, "report", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, "Print reports");
// ---- PRIVILEGE (OTHER) ----
reset = cli_register_command(cli, NULL, "reset", NULL, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Reset something...");
cli_register_command(cli, reset, "interface", cmd_reset_interface, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Reset interfaces");
cli_register_command(cli, reset, "packet", cmd_reset_packet, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Reset interfaces");
// ------- LAUNCH ------
launch = cli_register_command(cli, NULL, "launch", NULL, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch a predefined MOPS process");
cli_register_command(cli, launch, "bpdu", launch_bpdu, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch a(nother) BPDU process");
cli_register_command(cli, launch, "synflood", launch_synflood, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch a(nother) SYN-Flood process");
// cli_register_command(cli, launch, "alot", launch_alot, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch lots of traffic");
// cli_register_command(cli, launch, "rtp", launch_rtp, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch rtp stream(s)");
// cli_register_command(cli, launch, "arp", launch_arp, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch a(nother) ARP process");
// cli_register_command(cli, launch, "lldp", launch_lldp, PRIVILEGE_PRIVILEGED, MODE_EXEC, "Launch a(nother) LLDP process");
// *******************************************************
// Create a socket
s = socket(AF_INET, SOCK_STREAM, 0);
setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
// Should we bind the CLI session to a specific interface?
// TODO: This does nothing !?
for (i=0; i<device_list_entries; i++) {
if (device_list[i].cli) {
setsockopt(s, SOL_SOCKET, SO_BINDTODEVICE, device_list[i].dev, strnlen(device_list[i].dev, 16));
break; // can only be one interface
}
}
// Listen on port mz_port (default: 25542, towel day)
memset(&servaddr, 0, sizeof(servaddr));
servaddr.sin_family = AF_INET;
inet_aton(mz_listen_addr, &servaddr.sin_addr);
servaddr.sin_port = htons(mz_port);
bind(s, (struct sockaddr *)&servaddr, sizeof(servaddr));
if (!quiet) {
fprintf(stderr, "Mausezahn accepts incoming Telnet connections on %s:%i.\n", mz_listen_addr, mz_port);
}
// Wait for a connection
listen(s, 50);
while ((x = accept(s, NULL, 0)))
{
if (!quiet)
{
cnt++;
timestamp_human(TimeStamp, NULL);
fprintf(stderr, "Got incoming connection [%i] at %s.\n", cnt, TimeStamp);
fflush(stderr);
}
// Pass the connection off to libcli
cli_loop(cli, x);
if (!quiet)
{
timestamp_human(TimeStamp, NULL);
fprintf(stderr, "Connection [%i] left at %s.\n", cnt, TimeStamp);
}
close(x);
}
// Free data structures
cli_done(cli);
return 0;
}
int main()
{
struct cli_command *c;
struct cli_def *cli;
int s, x;
struct sockaddr_in addr;
int on = 1;
#ifndef WIN32
signal(SIGCHLD, SIG_IGN);
#endif
#ifdef WIN32
if (!winsock_init()) {
printf("Error initialising winsock\n");
return 1;
}
#endif
// Prepare a small user context
char mymessage[] = "I contain user data!";
struct my_context myctx;
myctx.value = 5;
myctx.message = mymessage;
cli = cli_init();
cli_set_banner(cli, "libcli test environment");
cli_set_hostname(cli, "router");
cli_telnet_protocol(cli, 1);
cli_regular(cli, regular_callback);
cli_regular_interval(cli, 5); // Defaults to 1 second
cli_set_idle_timeout_callback(cli, 60, idle_timeout); // 60 second idle timeout
cli_register_command(cli, NULL, "test", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "simple", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "simon", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "set", cmd_set, PRIVILEGE_PRIVILEGED, MODE_EXEC, NULL);
c = cli_register_command(cli, NULL, "show", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, c, "regular", cmd_show_regular, PRIVILEGE_UNPRIVILEGED, MODE_EXEC,
"Show the how many times cli_regular has run");
cli_register_command(cli, c, "counters", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC,
"Show the counters that the system uses");
cli_register_command(cli, c, "junk", cmd_test, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, NULL, "interface", cmd_config_int, PRIVILEGE_PRIVILEGED, MODE_CONFIG,
"Configure an interface");
cli_register_command(cli, NULL, "exit", cmd_config_int_exit, PRIVILEGE_PRIVILEGED, MODE_CONFIG_INT,
"Exit from interface configuration");
cli_register_command(cli, NULL, "address", cmd_test, PRIVILEGE_PRIVILEGED, MODE_CONFIG_INT, "Set IP address");
c = cli_register_command(cli, NULL, "debug", NULL, PRIVILEGE_UNPRIVILEGED, MODE_EXEC, NULL);
cli_register_command(cli, c, "regular", cmd_debug_regular, PRIVILEGE_UNPRIVILEGED, MODE_EXEC,
"Enable cli_regular() callback debugging");
// Set user context and its command
cli_set_context(cli, (void*)&myctx);
cli_register_command(cli, NULL, "context", cmd_context, PRIVILEGE_UNPRIVILEGED, MODE_EXEC,
"Test a user-specified context");
cli_set_auth_callback(cli, check_auth);
cli_set_enable_callback(cli, check_enable);
// Test reading from a file
{
FILE *fh;
if ((fh = fopen("clitest.txt", "r")))
{
// This sets a callback which just displays the cli_print() text to stdout
cli_print_callback(cli, pc);
cli_file(cli, fh, PRIVILEGE_UNPRIVILEGED, MODE_EXEC);
cli_print_callback(cli, NULL);
fclose(fh);
}
}
if ((s = socket(AF_INET, SOCK_STREAM, 0)) < 0)
{
perror("socket");
return 1;
}
setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET;
addr.sin_addr.s_addr = htonl(INADDR_ANY);
addr.sin_port = htons(CLITEST_PORT);
if (bind(s, (struct sockaddr *) &addr, sizeof(addr)) < 0)
{
perror("bind");
return 1;
}
if (listen(s, 50) < 0)
{
perror("listen");
return 1;
}
printf("Listening on port %d\n", CLITEST_PORT);
while ((x = accept(s, NULL, 0)))
{
#ifndef WIN32
int pid = fork();
if (pid < 0)
{
perror("fork");
return 1;
}
/* parent */
if (pid > 0)
{
socklen_t len = sizeof(addr);
if (getpeername(x, (struct sockaddr *) &addr, &len) >= 0)
printf(" * accepted connection from %s\n", inet_ntoa(addr.sin_addr));
close(x);
continue;
}
/* child */
close(s);
cli_loop(cli, x);
exit(0);
#else
cli_loop(cli, x);
shutdown(x, SD_BOTH);
close(x);
#endif
}
cli_done(cli);
return 0;
}