void Element::setTick( int t )
{
Id clockId( 1 );
if ( t == tick_ )
return;
if ( tick_ >= 0 ) { // Drop all messages coming here from clock.
dropAllMsgsFromSrc( clockId );
}
tick_ = t;
if ( t < 0 || t > 31 ) { // Only 32 ticks available.
// Don't need to add new ticks.
return;
}
const Finfo* f2 = cinfo()->findFinfo( "init" );
if ( f2 && dynamic_cast< const SharedFinfo* >( f2 ) ) {
// Must build init msg too. This comes on the previous tick.
assert( t > 0 );
addClockMsg( t-1, id(), f2 );
}
f2 = cinfo()->findFinfo( "proc" );
if ( f2 ) {
addClockMsg( t, id(), f2 );
} else {
cout << "Element::setTick:Warning: Attempt to assign a tick to a '"
<< cinfo_->name() << "'.\nThis does not support process actions.\n";
tick_ = -1;
}
}
/**
* Static function, used to flip flags to start or end a simulation.
* It is used as the within-barrier function of barrier 3.
* This has to be in the barrier as we are altering a Clock field which
* the 'process' flag depends on.
* Six cases:
* - Do nothing
* - Reinit only
* - Reinit followed by start
* - Start only
* - Stop only
* - Stop followed by Reinit.
* Some of these cases need additional intermediate steps, since the reinit
* flag has to turn itself off after one cycle.
*/
void Clock::checkProcState()
{
/// Handle pending Reduce operations.
Qinfo::clearReduceQ( Shell::numProcessThreads() );
if ( procState_ == NoChange ) { // Most common
return;
}
Id clockId( 1 );
assert( clockId() );
Clock* clock = reinterpret_cast< Clock* >( clockId.eref().data() );
switch ( procState_ ) {
case TurnOnReinit:
clock->doingReinit_ = 1;
// procState_ = TurnOffReinit;
break;
case TurnOffReinit:
clock->doingReinit_ = 0;
procState_ = NoChange;
break;
case ReinitThenStart:
clock->doingReinit_ = 1;
procState_ = StartOnly;
break;
case StartOnly:
clock->doingReinit_ = 0;
clock->isRunning_ = 1;
procState_ = NoChange;
break;
case StopOnly:
clock->isRunning_ = 0;
procState_ = NoChange;
break;
case StopThenReinit:
clock->isRunning_ = 0;
clock->doingReinit_ = 1;
// procState_ = TurnOffReinit;
break;
case NoChange:
default:
break;
}
}
double Neutral::getDt( const Eref& e ) const
{
int tick = e.element()->getTick();
if ( tick < 0 )
return 0.0;
Id clockId( 1 );
return LookupField< unsigned int, double >::get(
clockId, "tickDt", tick );
}
void Shell::doReinit( )
{
#ifdef ENABLE_LOGGER
clock_t t = clock();
cout << logger.dumpStats(0);
#endif
Id clockId( 1 );
SetGet0::set( clockId, "reinit" );
#ifdef ENABLE_LOGGER
float time = (float(clock() - t)/CLOCKS_PER_SEC);
logger.initializationTime.push_back(time);
#endif
}
void Shell::doStart( double runtime )
{
#ifdef ENABLE_LOGGER
clock_t t = clock();
stringstream ss;
ss << "Running moose for " << runtime << " seconds";
logger.log("INFO", ss.str());
#endif
Id clockId( 1 );
SetGet1< double >::set( clockId, "start", runtime );
#ifdef ENABLE_LOGGER
float time = (float(clock() - t) / CLOCKS_PER_SEC);
logger.simulationTime.push_back(time);
#endif
}
/**
* In phase2 it advances the internal counter to move to the next tick,
* and when all ticks for this TickManager are done, to move to the next
* TickManager.
*/
void Clock::reinitPhase2( ProcInfo* info )
{
info->currTime = 0.0;
if ( Shell::isSingleThreaded() || info->threadIndexInGroup == 1 ) {
if ( tickPtr_.size() == 0 ||
tickPtr_[ currTickPtr_ ].mgr()->reinitPhase2( info ) ) {
++currTickPtr_;
if ( currTickPtr_ >= tickPtr_.size() ) {
Id clockId( 1 );
ack()->send( clockId.eref(), info->threadIndexInGroup,
info->nodeIndexInGroup, OkStatus );
procState_ = TurnOffReinit;
++countReinit2_;
}
}
}
}
// In phase 2 we need to do the updates to the Clock object, especially
// sorting the TickPtrs. This also is when we find out if the simulation
// is finished.
// Note that this function happens when lots of other threads are doing
// things. So it cannot touch any fields which might affect other threads.
void Clock::advancePhase2( ProcInfo *p )
{
if ( Shell::isSingleThreaded() || p->threadIndexInGroup == 1 ) {
tickPtr_[0].mgr()->advancePhase2( p );
if ( tickPtr_.size() > 1 )
sort( tickPtr_.begin(), tickPtr_.end() );
currentTime_ = tickPtr_[0].mgr()->getNextTime() -
tickPtr_[0].mgr()->getDt();
if ( currentTime_ > endTime_ ) {
Id clockId( 1 );
procState_ = StopOnly;
finished()->send( clockId.eref(), p->threadIndexInGroup );
ack()->send( clockId.eref(), p->threadIndexInGroup,
p->nodeIndexInGroup, OkStatus );
}
++countAdvance2_;
}
}
static bool addClockMsg( unsigned int tick, Id tgt, const Finfo* f2 )
{
Id clockId( 1 );
stringstream ss;
ss << "proc" << tick;
const Finfo* f1 = clockId.element()->cinfo()->findFinfo( ss.str() );
assert( f1 );
assert( f2 );
Msg* m = new OneToAllMsg( clockId.eref(), tgt.element(), 0 );
if ( m ) {
if ( f1->addMsg( f2, m->mid(), clockId.element() ) ) {
return true;
}
delete m;
}
cout << "Error: Element::setTick: failed to connect " << tgt <<
" to clock\n";
return false;
}
// Non-static function. The innerAddMsg needs the shell.
void Shell::addClockMsgs(
const vector< ObjId >& list, const string& field, unsigned int tick,
unsigned int msgIndex )
{
if ( !Id( 1 ).element() )
return;
ObjId clockId( 1 );
dropClockMsgs( list, field ); // Forbid duplicate PROCESS actions.
for ( vector< ObjId >::const_iterator i = list.begin();
i != list.end(); ++i ) {
if ( i->element() ) {
stringstream ss;
ss << "proc" << tick;
const Msg* m = innerAddMsg( "OneToAll",
clockId, ss.str(),
*i, field, msgIndex++ );
if ( m )
i->element()->innerSetTick( tick );
}
}
}
void Shell::doStop( )
{
Id clockId( 1 );
SetGet0::set( clockId, "stop" );
}
