void main(void){
ADCON1 = 0x0f;
LED_dir = 0;
LED = 0;
TMR0H = 0x3C;
TMR0L = 0xB0;
TIMER_CON = 0b10000011;
TIMER0_CON = 0b10000001;
INTCONbits.GIE = 1;
INTCONbits.TMR0IF = 0;
INTCONbits.TMR0IE = 1;
VENTILADOR_dir = 0;
VENTILADOR = 1;
configLCD();
while(1){
}
}
int main (void)
{
// Inicializamos la placa
initBoard();
// Inicializamos el LCD
configLCD(&databusLCD, &enPinLCD, &rwPinLCD, &rsPinLCD);
// Escribimos texto en el LCD
printLCD("Wake up Neo");
// Bucle infinito
while(1)
{
// Parpadeamos el led
togglePin(&LED[0]);
delay_ms(500);
}
return 0;
}
int main(int argc, char** argv) {
char tempStr[14];
LCDcursor cursor;
/* ----- Device Initial Config ----- */
pic16f1825_init();
/* ------ LCD Initial Config ------- */
initLCD();
configLCD();
/* ---------- RAM Testing ---------- */
uint16_t RAMtest = memtest_MARCH_Cmin();
LATC1 = 1;
clearLCD(&cursor);
sprintf(tempStr, "Memory Tests:");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
/* Returns 0x3000 if no Errors, otherwise returns the address of the first error */
gotoXY(0, cursor.yPos+1);
cursor.yPos += 1;
if(0x3000 == RAMtest){
sprintf(tempStr, "RAM Test OK!");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}else {
sprintf(tempStr, "!RAM @ 0x%04X", RAMtest);
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}
/* ---------- ROM Testing ---------- */
uint8_t ROMtest = memtest_program_mem();
if(ROMtest){
sprintf(tempStr, "ROM Test OK!");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}else {
sprintf(tempStr, "ROM Error!");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}
/* -------- EEPROM Testing -------- */
if(memtest_eeprom(NULL)){
sprintf(tempStr, "EEPROM Test OK!");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}else {
sprintf(tempStr, "EEPROM Error!");
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}
uint8_t turn_on_times = read_eeprom(0);
if(0xFF == turn_on_times) /* By default the EEPROM data in a given address is 0xFF */
turn_on_times = 1; /* This is the first time the circuit is powered up */
else
turn_on_times++;
write_eeprom(0,turn_on_times);
write_eeprom(255,turn_on_times ); /* update the checksum (last address of EEPROM) */
sprintf(tempStr, "The circuit was powered %d times",turn_on_times);
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
__delay_ms(3000);
printImageLCD(IMG);
__delay_ms(3000);
set_precision_ds18b20(PRECISION_12);
while(1){
start_temp_measure_ds18b20();
__delay_ms(1000); /* Wait for temperature measurement */
sprintf(tempStr, "Temp: %.2f", read_temp_ds18b20());
gotoXY(0,2);
cursor.yPos = 2;
printlnLCD(tempStr, strlen(tempStr), 2, &cursor);
}
return (EXIT_SUCCESS);
}
