コード例 #1
0
ファイル: signal.c プロジェクト: 3sOx/asuswrt-merlin
static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
				 sigset_t *set, unsigned long sp)
{
	int err = 0;

	err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
	err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
	err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
	err |= copy_sc_to_user(&uc->uc_mcontext, fp, &current->thread.regs, sp);
	err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
	return err;
}
コード例 #2
0
ファイル: frame_kern.c プロジェクト: GodFox/magx_kernel_xpixl
static int copy_ucontext_to_user(struct ucontext *uc, void *fp, sigset_t *set,
				 unsigned long sp)
{
	int err = 0;

	err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
	err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
	err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
	err |= copy_sc_to_user(&uc->uc_mcontext, fp, &current->thread.regs,
			       &signal_frame_si.common.arch);
	err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
	return(err);
}
コード例 #3
0
int setup_signal_stack_sc(unsigned long stack_top, int sig,
			  struct k_sigaction *ka, struct pt_regs *regs,
			  sigset_t *mask)
{
	struct sigframe __user *frame;
	void *restorer;
	int err = 0;

	stack_top &= -8UL;
	frame = (struct sigframe *) stack_top - 1;
	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		return 1;

	restorer = (void *) frame->retcode;
	if(ka->sa.sa_flags & SA_RESTORER)
		restorer = ka->sa.sa_restorer;

	err |= __put_user(restorer, &frame->pretcode);
	err |= __put_user(sig, &frame->sig);
	err |= copy_sc_to_user(&frame->sc, NULL, regs);
	err |= __put_user(mask->sig[0], &frame->sc.oldmask);
	if (_NSIG_WORDS > 1)
		err |= __copy_to_user(&frame->extramask, &mask->sig[1],
				      sizeof(frame->extramask));

	/*
	 * This is popl %eax ; movl $,%eax ; int $0x80
	 *
	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
	 * reasons and because gdb uses it as a signature to notice
	 * signal handler stack frames.
	 */
	err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
	err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));

	if(err)
		return(err);

	PT_REGS_SP(regs) = (unsigned long) frame;
	PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
	PT_REGS_EAX(regs) = (unsigned long) sig;
	PT_REGS_EDX(regs) = (unsigned long) 0;
	PT_REGS_ECX(regs) = (unsigned long) 0;

	if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
		ptrace_notify(SIGTRAP);
	return(0);
}
コード例 #4
0
ファイル: frame_kern.c プロジェクト: GodFox/magx_kernel_xpixl
int setup_signal_stack_sc(unsigned long stack_top, int sig, 
			  struct k_sigaction *ka, struct pt_regs *regs,
			  sigset_t *mask)
{
	struct frame_common *frame = &signal_frame_sc_sr.common;
	void *restorer;
	void *user_sc;
	int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
	unsigned long sigs, sr;
	unsigned long start = stack_top - frame->len - sig_size;

	restorer = NULL;
	if(ka->sa.sa_flags & SA_RESTORER)
		restorer = ka->sa.sa_restorer;

	user_sc = (void *) (start + signal_frame_sc_sr.sc_index);
	if(restorer == NULL){
		frame = &signal_frame_sc.common;
		user_sc = (void *) (start + signal_frame_sc.sc_index);
		sr = (unsigned long) frame->data;
		sr += frame->sr_index;
		sr = *((unsigned long *) sr);
		restorer = ((void (*)(void)) sr);
	}

	sigs = start + frame->len;
	if(copy_to_user((void *) start, frame->data, frame->len) ||
	   copy_to_user((void *) (start + frame->sig_index), &sig, 
			sizeof(sig)) ||
	   copy_sc_to_user(user_sc, NULL, regs, 
			   &signal_frame_sc.common.arch) ||
	   copy_to_user(sc_sigmask(user_sc), mask, sizeof(mask->sig[0])) ||
	   copy_to_user((void *) sigs, &mask->sig[1], sig_size) ||
	   copy_restorer(restorer, start, frame->sr_index, frame->sr_relative))
		return(1);

	PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
	PT_REGS_SP(regs) = start + frame->sp_index;

	return(0);
}
コード例 #5
0
ファイル: signal.c プロジェクト: 3sOx/asuswrt-merlin
int setup_signal_stack_sc(unsigned long stack_top, int sig,
			  struct k_sigaction *ka, struct pt_regs *regs,
			  sigset_t *mask)
{
	struct sigframe __user *frame;
	void __user *restorer;
	unsigned long save_sp = PT_REGS_SP(regs);
	int err = 0;

	/* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */
	stack_top = ((stack_top + 4) & -16UL) - 4;
	frame = (struct sigframe __user *) stack_top - 1;
	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		return 1;

	restorer = frame->retcode;
	if(ka->sa.sa_flags & SA_RESTORER)
		restorer = ka->sa.sa_restorer;

	/* Update SP now because the page fault handler refuses to extend
	 * the stack if the faulting address is too far below the current
	 * SP, which frame now certainly is.  If there's an error, the original
	 * value is restored on the way out.
	 * When writing the sigcontext to the stack, we have to write the
	 * original value, so that's passed to copy_sc_to_user, which does
	 * the right thing with it.
	 */
	PT_REGS_SP(regs) = (unsigned long) frame;

	err |= __put_user(restorer, &frame->pretcode);
	err |= __put_user(sig, &frame->sig);
	err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp);
	err |= __put_user(mask->sig[0], &frame->sc.oldmask);
	if (_NSIG_WORDS > 1)
		err |= __copy_to_user(&frame->extramask, &mask->sig[1],
				      sizeof(frame->extramask));

	/*
	 * This is popl %eax ; movl $,%eax ; int $0x80
	 *
	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
	 * reasons and because gdb uses it as a signature to notice
	 * signal handler stack frames.
	 */
	err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
	err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
	err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));

	if(err)
		goto err;

	PT_REGS_SP(regs) = (unsigned long) frame;
	PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
	PT_REGS_EAX(regs) = (unsigned long) sig;
	PT_REGS_EDX(regs) = (unsigned long) 0;
	PT_REGS_ECX(regs) = (unsigned long) 0;

	if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
		ptrace_notify(SIGTRAP);
	return 0;

err:
	PT_REGS_SP(regs) = save_sp;
	return err;
}
コード例 #6
0
int setup_signal_stack_si(unsigned long stack_top, int sig,
			  struct k_sigaction *ka, struct pt_regs * regs,
			  siginfo_t *info, sigset_t *set)
{
	struct rt_sigframe __user *frame;
	unsigned long save_sp = PT_REGS_RSP(regs);
	int err = 0;
	struct task_struct *me = current;

	frame = (struct rt_sigframe __user *)
		round_down(stack_top - sizeof(struct rt_sigframe), 16);
	/* Subtract 128 for a red zone and 8 for proper alignment */
	frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);

	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		goto out;

	if (ka->sa.sa_flags & SA_SIGINFO) {
		err |= copy_siginfo_to_user(&frame->info, info);
		if (err)
			goto out;
	}

	/*
	 * Update SP now because the page fault handler refuses to extend
	 * the stack if the faulting address is too far below the current
	 * SP, which frame now certainly is.  If there's an error, the original
	 * value is restored on the way out.
	 * When writing the sigcontext to the stack, we have to write the
	 * original value, so that's passed to copy_sc_to_user, which does
	 * the right thing with it.
	 */
	PT_REGS_RSP(regs) = (unsigned long) frame;

	/* Create the ucontext.  */
	err |= __put_user(0, &frame->uc.uc_flags);
	err |= __put_user(0, &frame->uc.uc_link);
	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
	err |= __put_user(sas_ss_flags(save_sp),
			  &frame->uc.uc_stack.ss_flags);
	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
	err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
			       set->sig[0], save_sp);
	err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
	if (sizeof(*set) == 16) {
		__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
	}
	else
		err |= __copy_to_user(&frame->uc.uc_sigmask, set,
				      sizeof(*set));

	/*
	 * Set up to return from userspace.  If provided, use a stub
	 * already in userspace.
	 */
	/* x86-64 should always use SA_RESTORER. */
	if (ka->sa.sa_flags & SA_RESTORER)
		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
	else
		/* could use a vstub here */
		goto restore_sp;

	if (err)
		goto restore_sp;

	/* Set up registers for signal handler */
	{
		struct exec_domain *ed = current_thread_info()->exec_domain;
		if (unlikely(ed && ed->signal_invmap && sig < 32))
			sig = ed->signal_invmap[sig];
	}

	PT_REGS_RDI(regs) = sig;
	/* In case the signal handler was declared without prototypes */
	PT_REGS_RAX(regs) = 0;

	/*
	 * This also works for non SA_SIGINFO handlers because they expect the
	 * next argument after the signal number on the stack.
	 */
	PT_REGS_RSI(regs) = (unsigned long) &frame->info;
	PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
	PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;
 out:
	return err;

restore_sp:
	PT_REGS_RSP(regs) = save_sp;
	return err;
}
コード例 #7
0
int setup_signal_stack_si(unsigned long stack_top, int sig,
			  struct k_sigaction *ka, struct pt_regs * regs,
			  siginfo_t *info, sigset_t *set)
{
	struct rt_sigframe __user *frame;
	struct _fpstate __user *fp = NULL;
	int err = 0;
	struct task_struct *me = current;

	frame = (struct rt_sigframe __user *)
		round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
        frame = (struct rt_sigframe *) ((unsigned long) frame - 128);

	if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
		goto out;

#if 0 /* XXX */
	if (save_i387(fp) < 0)
		err |= -1;
#endif
	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		goto out;

	if (ka->sa.sa_flags & SA_SIGINFO) {
		err |= copy_siginfo_to_user(&frame->info, info);
		if (err)
			goto out;
	}

	/* Create the ucontext.  */
	err |= __put_user(0, &frame->uc.uc_flags);
	err |= __put_user(0, &frame->uc.uc_link);
	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
	err |= __put_user(sas_ss_flags(PT_REGS_SP(regs)),
			  &frame->uc.uc_stack.ss_flags);
	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
	err |= copy_sc_to_user(&frame->uc.uc_mcontext, fp, regs, set->sig[0]);
	err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
	if (sizeof(*set) == 16) {
		__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
	}
	else
		err |= __copy_to_user(&frame->uc.uc_sigmask, set,
				      sizeof(*set));

	/* Set up to return from userspace.  If provided, use a stub
	   already in userspace.  */
	/* x86-64 should always use SA_RESTORER. */
	if (ka->sa.sa_flags & SA_RESTORER)
		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
	else
		/* could use a vstub here */
		goto out;

	if (err)
		goto out;

	/* Set up registers for signal handler */
	{
		struct exec_domain *ed = current_thread_info()->exec_domain;
		if (unlikely(ed && ed->signal_invmap && sig < 32))
			sig = ed->signal_invmap[sig];
	}

	PT_REGS_RDI(regs) = sig;
	/* In case the signal handler was declared without prototypes */
	PT_REGS_RAX(regs) = 0;

	/* This also works for non SA_SIGINFO handlers because they expect the
	   next argument after the signal number on the stack. */
	PT_REGS_RSI(regs) = (unsigned long) &frame->info;
	PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
	PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;

	PT_REGS_RSP(regs) = (unsigned long) frame;
 out:
	return(err);
}