static void
copy_clog_xlog_xid(void)
{
/* copy old commit logs to new data dir */
copy_subdir_files("pg_clog");
/* set the next transaction id of the new cluster */
prep_status("Setting next transaction ID for new cluster");
exec_prog(true, true, UTILITY_LOG_FILE, NULL,
SYSTEMQUOTE
"\"%s/pg_resetxlog\" -f -x %u \"%s\" >> \"%s\" 2>&1"
SYSTEMQUOTE, new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtxid,
new_cluster.pgdata, UTILITY_LOG_FILE);
check_ok();
/* now reset the wal archives in the new cluster */
prep_status("Resetting WAL archives");
exec_prog(true, true, UTILITY_LOG_FILE, NULL,
SYSTEMQUOTE
"\"%s/pg_resetxlog\" -l %s \"%s\" >> \"%s\" 2>&1"
SYSTEMQUOTE, new_cluster.bindir,
old_cluster.controldata.nextxlogfile,
new_cluster.pgdata, UTILITY_LOG_FILE);
check_ok();
}
static void
copy_xact_xlog_xid(void)
{
/*
* Copy old commit logs to new data dir. pg_clog has been renamed to
* pg_xact in post-10 clusters.
*/
copy_subdir_files(GET_MAJOR_VERSION(old_cluster.major_version) < 1000 ?
"pg_clog" : "pg_xact",
GET_MAJOR_VERSION(new_cluster.major_version) < 1000 ?
"pg_clog" : "pg_xact");
/* set the next transaction id and epoch of the new cluster */
prep_status("Setting next transaction ID and epoch for new cluster");
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
"\"%s/pg_resetwal\" -f -x %u \"%s\"",
new_cluster.bindir, old_cluster.controldata.chkpnt_nxtxid,
new_cluster.pgdata);
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
"\"%s/pg_resetwal\" -f -e %u \"%s\"",
new_cluster.bindir, old_cluster.controldata.chkpnt_nxtepoch,
new_cluster.pgdata);
/* must reset commit timestamp limits also */
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
"\"%s/pg_resetwal\" -f -c %u,%u \"%s\"",
new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtxid,
old_cluster.controldata.chkpnt_nxtxid,
new_cluster.pgdata);
check_ok();
/*
* If the old server is before the MULTIXACT_FORMATCHANGE_CAT_VER change
* (see pg_upgrade.h) and the new server is after, then we don't copy
* pg_multixact files, but we need to reset pg_control so that the new
* server doesn't attempt to read multis older than the cutoff value.
*/
if (old_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER &&
new_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER)
{
copy_subdir_files("pg_multixact/offsets", "pg_multixact/offsets");
copy_subdir_files("pg_multixact/members", "pg_multixact/members");
prep_status("Setting next multixact ID and offset for new cluster");
/*
* we preserve all files and contents, so we must preserve both "next"
* counters here and the oldest multi present on system.
*/
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
"\"%s/pg_resetwal\" -O %u -m %u,%u \"%s\"",
new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtmxoff,
old_cluster.controldata.chkpnt_nxtmulti,
old_cluster.controldata.chkpnt_oldstMulti,
new_cluster.pgdata);
check_ok();
}
else if (new_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER)
{
/*
* Remove offsets/0000 file created by initdb that no longer matches
* the new multi-xid value. "members" starts at zero so no need to
* remove it.
*/
remove_new_subdir("pg_multixact/offsets", false);
prep_status("Setting oldest multixact ID in new cluster");
/*
* We don't preserve files in this case, but it's important that the
* oldest multi is set to the latest value used by the old system, so
* that multixact.c returns the empty set for multis that might be
* present on disk. We set next multi to the value following that; it
* might end up wrapped around (i.e. 0) if the old cluster had
* next=MaxMultiXactId, but multixact.c can cope with that just fine.
*/
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
"\"%s/pg_resetwal\" -m %u,%u \"%s\"",
new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtmulti + 1,
old_cluster.controldata.chkpnt_nxtmulti,
new_cluster.pgdata);
check_ok();
}
/* now reset the wal archives in the new cluster */
prep_status("Resetting WAL archives");
exec_prog(UTILITY_LOG_FILE, NULL, true, true,
/* use timeline 1 to match controldata and no WAL history file */
"\"%s/pg_resetwal\" -l 00000001%s \"%s\"", new_cluster.bindir,
old_cluster.controldata.nextxlogfile + 8,
new_cluster.pgdata);
check_ok();
}
static void
copy_clog_xlog_xid(void)
{
/* copy old commit logs to new data dir */
copy_subdir_files("pg_clog");
/* set the next transaction id of the new cluster */
prep_status("Setting next transaction ID for new cluster");
exec_prog(UTILITY_LOG_FILE, NULL, true,
"\"%s/pg_resetxlog\" -f -x %u \"%s\"",
new_cluster.bindir, old_cluster.controldata.chkpnt_nxtxid,
new_cluster.pgdata);
check_ok();
/*
* If the old server is before the MULTIXACT_FORMATCHANGE_CAT_VER change
* (see pg_upgrade.h) and the new server is after, then we don't copy
* pg_multixact files, but we need to reset pg_control so that the new
* server doesn't attempt to read multis older than the cutoff value.
*/
if (old_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER &&
new_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER)
{
copy_subdir_files("pg_multixact/offsets");
copy_subdir_files("pg_multixact/members");
prep_status("Setting next multixact ID and offset for new cluster");
/*
* we preserve all files and contents, so we must preserve both "next"
* counters here and the oldest multi present on system.
*/
exec_prog(UTILITY_LOG_FILE, NULL, true,
"\"%s/pg_resetxlog\" -O %u -m %u,%u \"%s\"",
new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtmxoff,
old_cluster.controldata.chkpnt_nxtmulti,
old_cluster.controldata.chkpnt_oldstMulti,
new_cluster.pgdata);
check_ok();
}
else if (new_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER)
{
prep_status("Setting oldest multixact ID on new cluster");
/*
* We don't preserve files in this case, but it's important that the
* oldest multi is set to the latest value used by the old system, so
* that multixact.c returns the empty set for multis that might be
* present on disk. We set next multi to the value following that; it
* might end up wrapped around (i.e. 0) if the old cluster had
* next=MaxMultiXactId, but multixact.c can cope with that just fine.
*/
exec_prog(UTILITY_LOG_FILE, NULL, true,
"\"%s/pg_resetxlog\" -m %u,%u \"%s\"",
new_cluster.bindir,
old_cluster.controldata.chkpnt_nxtmulti + 1,
old_cluster.controldata.chkpnt_nxtmulti,
new_cluster.pgdata);
check_ok();
}
/* now reset the wal archives in the new cluster */
prep_status("Resetting WAL archives");
exec_prog(UTILITY_LOG_FILE, NULL, true,
"\"%s/pg_resetxlog\" -l %s \"%s\"", new_cluster.bindir,
old_cluster.controldata.nextxlogfile,
new_cluster.pgdata);
check_ok();
}
