void
LoginProcess::showError() const
{
switch ( m_lastError.enumValue() )
{
case lastfm::ws::AuthenticationFailed:
// COPYTODO
QMessageBoxBuilder( 0 )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Login Failed") )
.setText( tr("Sorry, we don't recognise that username, or you typed the password wrongly.") )
.exec();
break;
default:
// COPYTODO
QMessageBoxBuilder( 0 )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Last.fm Unavailable") )
.setText( tr("There was a problem communicating with the Last.fm services. Please try again later.") )
.exec();
break;
case lastfm::ws::TryAgainLater:
case lastfm::ws::UnknownError:
switch ( m_lastNetworkError )
{
case QNetworkReply::ProxyConnectionClosedError:
case QNetworkReply::ProxyConnectionRefusedError:
case QNetworkReply::ProxyNotFoundError:
case QNetworkReply::ProxyTimeoutError:
case QNetworkReply::ProxyAuthenticationRequiredError: //TODO we are meant to prompt!
case QNetworkReply::UnknownProxyError:
case QNetworkReply::UnknownNetworkError:
break;
default:
return;
}
// TODO proxy prompting?
// COPYTODO
QMessageBoxBuilder( 0 )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Cannot connect to Last.fm") )
.setText( tr("Last.fm cannot be reached. Please check your firewall or proxy settings.") )
.exec();
#ifdef WIN32
// show Internet Settings Control Panel
HMODULE h = LoadLibraryA( "InetCpl.cpl" );
if (!h) break;
BOOL (WINAPI *cpl)(HWND) = (BOOL (WINAPI *)(HWND)) GetProcAddress( h, "LaunchConnectionDialog" );
if (cpl) cpl( qApp->activeWindow()->winId() );
FreeLibrary( h );
#endif
break;
}
}
static void
raise_device_not_available_exception_if_ts_set ( struct mon_t *mon, privilege_level_t saved_cpl )
{
privilege_level_t curr_cpl = cpl ( mon->regs );
/* [TODO] consider EM flag of cr0 (IA-32 vol3A. 2-19) */
if ( ( saved_cpl == SUPERVISOR_MODE ) && ( curr_cpl == USER_MODE ) &&
( mon->regs->sys.cr0.task_switched ) ) {
/* raise device-not-available exception (#NM) for restoring fpu */
Monitor_raise_interrupt ( mon, IVECTOR_DEVICE_NOT_AVAILABLE );
}
}
static void
____monitor_run ( struct mon_t *mon, int signo )
{
privilege_level_t saved_cpl;
ASSERT ( mon != NULL );
saved_cpl = cpl ( mon->regs );
handle_signal_with_stat ( mon, signo );
try_handle_msgs_with_stat ( mon );
try_generate_interrupt_with_stat ( mon );
/* for restoring the state of FPU */
raise_device_not_available_exception_if_ts_set ( mon, saved_cpl );
}
/////////////////////////////////////////////////////////////////////////////
//++
//
// CBasePropertyPage::BSetPrivateProps
//
// Routine Description:
// Set the private properties for this object.
//
// Arguments:
// bValidateOnly [IN] TRUE = only validate the data.
//
// Return Value:
// ERROR_SUCCESS The operation was completed successfully.
// !0 Failure.
//
//--
/////////////////////////////////////////////////////////////////////////////
BOOL CBasePropertyPage::BSetPrivateProps(IN BOOL bValidateOnly)
{
BOOL bSuccess = TRUE;
CClusPropList cpl(BWizard() /*bAlwaysAddProp*/);
CWaitCursor wc;
ASSERT(Peo() != NULL);
// Build the property list.
try
{
BuildPropList(cpl);
} // try
catch (CException * pe)
{
pe->ReportError();
pe->Delete();
bSuccess = FALSE;
} // catch: CException
// Set the data.
if (bSuccess)
{
if ((cpl.PbProplist() != NULL) && (cpl.CbProplist() > 0))
{
DWORD dwStatus;
DWORD dwControlCode;
DWORD cbProps;
switch (Cot())
{
case CLUADMEX_OT_NODE:
ASSERT(Peo()->PndNodeData() != NULL);
ASSERT(Peo()->PndNodeData()->m_hnode != NULL);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_NODE_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_NODE_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterNodeControl(
Peo()->PndNodeData()->m_hnode,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
case CLUADMEX_OT_GROUP:
ASSERT(Peo()->PgdGroupData() != NULL);
ASSERT(Peo()->PgdGroupData()->m_hgroup != NULL);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_GROUP_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_GROUP_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterGroupControl(
Peo()->PgdGroupData()->m_hgroup,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
case CLUADMEX_OT_RESOURCE:
ASSERT(Peo()->PrdResData() != NULL);
ASSERT(Peo()->PrdResData()->m_hresource != NULL);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_RESOURCE_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_RESOURCE_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterResourceControl(
Peo()->PrdResData()->m_hresource,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
case CLUADMEX_OT_RESOURCETYPE:
ASSERT(Peo()->PodObjData() != NULL);
ASSERT(Peo()->PodObjData()->m_strName.GetLength() > 0);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_RESOURCE_TYPE_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_RESOURCE_TYPE_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterResourceTypeControl(
Hcluster(),
Peo()->PodObjData()->m_strName,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
case CLUADMEX_OT_NETWORK:
ASSERT(Peo()->PndNetworkData() != NULL);
ASSERT(Peo()->PndNetworkData()->m_hnetwork != NULL);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_NETWORK_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_NETWORK_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterNetworkControl(
Peo()->PndNetworkData()->m_hnetwork,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
case CLUADMEX_OT_NETINTERFACE:
ASSERT(Peo()->PndNetInterfaceData() != NULL);
ASSERT(Peo()->PndNetInterfaceData()->m_hnetinterface != NULL);
// Determine which control code to use.
if (bValidateOnly)
dwControlCode = CLUSCTL_NETINTERFACE_VALIDATE_PRIVATE_PROPERTIES;
else
dwControlCode = CLUSCTL_NETINTERFACE_SET_PRIVATE_PROPERTIES;
// Set private properties.
dwStatus = ClusterNetInterfaceControl(
Peo()->PndNetInterfaceData()->m_hnetinterface,
NULL, // hNode
dwControlCode,
cpl.PbProplist(),
cpl.CbProplist(),
NULL, // lpOutBuffer
0, // nOutBufferSize
&cbProps
);
break;
default:
ASSERT(0);
} // switch: object type
// Handle errors.
if (dwStatus != ERROR_SUCCESS)
{
CString strMsg;
FormatError(strMsg, dwStatus);
AfxMessageBox(strMsg);
if (bValidateOnly
|| (dwStatus != ERROR_RESOURCE_PROPERTIES_STORED))
bSuccess = FALSE;
} // if: error setting/validating data
} // if: there is data to set
} // if: no errors building the property list
// Save data locally.
if (!bValidateOnly && bSuccess)
{
// Save new values as previous values.
try
{
DWORD cprop;
const CObjectProperty * pprop;
for (pprop = Pprops(), cprop = Cprops() ; cprop > 0 ; pprop++, cprop--)
{
switch (pprop->m_propFormat)
{
case CLUSPROP_FORMAT_SZ:
case CLUSPROP_FORMAT_EXPAND_SZ:
ASSERT(pprop->m_value.pstr != NULL);
ASSERT(pprop->m_valuePrev.pstr != NULL);
*pprop->m_valuePrev.pstr = *pprop->m_value.pstr;
break;
case CLUSPROP_FORMAT_DWORD:
ASSERT(pprop->m_value.pdw != NULL);
ASSERT(pprop->m_valuePrev.pdw != NULL);
*pprop->m_valuePrev.pdw = *pprop->m_value.pdw;
break;
case CLUSPROP_FORMAT_BINARY:
case CLUSPROP_FORMAT_MULTI_SZ:
ASSERT(pprop->m_value.ppb != NULL);
ASSERT(*pprop->m_value.ppb != NULL);
ASSERT(pprop->m_value.pcb != NULL);
ASSERT(pprop->m_valuePrev.ppb != NULL);
ASSERT(*pprop->m_valuePrev.ppb != NULL);
ASSERT(pprop->m_valuePrev.pcb != NULL);
delete [] *pprop->m_valuePrev.ppb;
*pprop->m_valuePrev.ppb = new BYTE[*pprop->m_value.pcb];
CopyMemory(*pprop->m_valuePrev.ppb, *pprop->m_value.ppb, *pprop->m_value.pcb);
*pprop->m_valuePrev.pcb = *pprop->m_value.pcb;
break;
default:
ASSERT(0); // don't know how to deal with this type
} // switch: property format
} // for: each property
} // try
catch (CException * pe)
{
pe->ReportError();
pe->Delete();
bSuccess = FALSE;
} // catch: CException
} // if: not just validating and successful so far
return bSuccess;
} //*** CBasePropertyPage::BSetPrivateProps()
/////////////////////////////////////////////////////////////////////////////
//++
//
// CBasePropertyPage::BSetPrivateProps
//
// Description:
// Set the private properties for this object.
//
// Arguments:
// fValidateOnlyIn
// TRUE = only validate the data.
//
// fNoNewPropsIn
// TRUE = exclude properties marked with opfNew.
//
// Return Value:
// ERROR_SUCCESS
// The operation was completed successfully.
//
// Other Win32 values.
// Failure.
//
//--
/////////////////////////////////////////////////////////////////////////////
BOOL
CBasePropertyPage::BSetPrivateProps(
BOOL fValidateOnlyIn // = FALSE
, BOOL fNoNewPropsIn // = FALSE
)
{
BOOL fSuccess = TRUE;
CClusPropList cpl( BWizard() /*bAlwaysAddProp*/ );
ASSERT( Peo() != NULL );
ASSERT( Peo()->PodObjData() );
//
// Build the property list.
//
try
{
fSuccess = BBuildPropList( cpl, fNoNewPropsIn );
} // try
catch ( CException * pe )
{
pe->ReportError();
pe->Delete();
fSuccess = FALSE;
} // catch: CException
//
// Set the data.
//
if ( fSuccess )
{
if ( (cpl.PbPropList() != NULL) && (cpl.CbPropList() > 0) )
{
DWORD sc = ERROR_SUCCESS;
DWORD dwControlCode;
DWORD cbProps;
switch ( Cot() )
{
case CLUADMEX_OT_NODE:
{
CNodeData * pcnd = reinterpret_cast< CNodeData * >( Peo()->PodObjData() );
ASSERT( pcnd && (pcnd->GetHNode() != NULL) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_NODE_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_NODE_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterNodeControl(
pcnd->GetHNode()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
case CLUADMEX_OT_GROUP:
{
CGroupData * pcgd = reinterpret_cast< CGroupData * >( Peo()->PodObjData() );
ASSERT( pcgd && (pcgd->GetHGroup() != NULL) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_GROUP_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_GROUP_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterGroupControl(
pcgd->GetHGroup()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
case CLUADMEX_OT_RESOURCE:
{
CResData * pcrd = reinterpret_cast< CResData * >( Peo()->PodObjData() );
ASSERT( pcrd && (pcrd->GetHResource() != NULL) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_RESOURCE_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_RESOURCE_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterResourceControl(
pcrd->GetHResource()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
case CLUADMEX_OT_RESOURCETYPE:
{
CResTypeData * pcrd = reinterpret_cast< CResTypeData * >( Peo()->PodObjData() );
ASSERT( pcrd && (pcrd->StrName().GetLength() > 0) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_RESOURCE_TYPE_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_RESOURCE_TYPE_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterResourceTypeControl(
Hcluster()
, pcrd->StrName()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
case CLUADMEX_OT_NETWORK:
{
CNetworkData * pcnd = reinterpret_cast< CNetworkData * >( Peo()->PodObjData() );
ASSERT( pcnd && (pcnd->GetHNetwork() != NULL) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_NETWORK_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_NETWORK_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterNetworkControl(
pcnd->GetHNetwork()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
case CLUADMEX_OT_NETINTERFACE:
{
CNetInterfaceData * pcnd = reinterpret_cast< CNetInterfaceData * >( Peo()->PodObjData() );
ASSERT( pcnd && (pcnd->GetHNetInterface() != NULL) );
//
// Determine which control code to use.
//
if ( fValidateOnlyIn )
{
dwControlCode = CLUSCTL_NETINTERFACE_VALIDATE_PRIVATE_PROPERTIES;
} // if: only validating data
else
{
dwControlCode = CLUSCTL_NETINTERFACE_SET_PRIVATE_PROPERTIES;
} // else: setting data
//
// Set private properties.
//
sc = ClusterNetInterfaceControl(
pcnd->GetHNetInterface()
, NULL // hNode
, dwControlCode
, cpl.PbPropList()
, static_cast< DWORD >( cpl.CbPropList() )
, NULL // lpOutBuffer
, 0 // nOutBufferSize
, &cbProps
);
break;
} // case:
default:
ASSERT( 0 );
} // switch: object type
//
// Handle errors.
//
if ( sc != ERROR_SUCCESS )
{
if ( sc == ERROR_INVALID_PARAMETER )
{
if ( ! fNoNewPropsIn )
{
fSuccess = BSetPrivateProps( fValidateOnlyIn, TRUE /*fNoNewPropsIn*/ );
} // if: new props are allowed
else
fSuccess = FALSE;
} // if: invalid parameter error occurred
else
{
fSuccess = FALSE;
} // else: some other error occurred
//
// If an error occurred, display an error message.
//
if ( ! fSuccess )
{
DisplaySetPropsError( sc, fValidateOnlyIn ? IDS_ERROR_VALIDATING_PROPERTIES : IDS_ERROR_SETTING_PROPERTIES );
if ( sc == ERROR_RESOURCE_PROPERTIES_STORED )
{
fSuccess = TRUE;
} // if: properties only stored
} // if: error occurred
} // if: error setting/validating data
} // if: there is data to set
} // if: no errors building the property list
//
// Save data locally.
//
if ( ! fValidateOnlyIn && fSuccess )
{
//
// Save new values as previous values.
//
try
{
DWORD cprop;
const CObjectProperty * pprop;
for ( pprop = Pprops(), cprop = Cprops() ; cprop > 0 ; pprop++, cprop-- )
{
switch ( pprop->m_propFormat )
{
case CLUSPROP_FORMAT_SZ:
case CLUSPROP_FORMAT_EXPAND_SZ:
ASSERT(pprop->m_value.pstr != NULL);
ASSERT(pprop->m_valuePrev.pstr != NULL);
*pprop->m_valuePrev.pstr = *pprop->m_value.pstr;
break;
case CLUSPROP_FORMAT_DWORD:
case CLUSPROP_FORMAT_LONG:
ASSERT( pprop->m_value.pdw != NULL );
ASSERT( pprop->m_valuePrev.pdw != NULL );
*pprop->m_valuePrev.pdw = *pprop->m_value.pdw;
break;
case CLUSPROP_FORMAT_BINARY:
case CLUSPROP_FORMAT_MULTI_SZ:
ASSERT( pprop->m_value.ppb != NULL );
ASSERT( *pprop->m_value.ppb != NULL );
ASSERT( pprop->m_value.pcb != NULL );
ASSERT( pprop->m_valuePrev.ppb != NULL );
ASSERT( *pprop->m_valuePrev.ppb != NULL );
ASSERT( pprop->m_valuePrev.pcb != NULL );
delete [] *pprop->m_valuePrev.ppb;
*pprop->m_valuePrev.ppb = new BYTE[ *pprop->m_value.pcb ];
CopyMemory( *pprop->m_valuePrev.ppb, *pprop->m_value.ppb, *pprop->m_value.pcb );
*pprop->m_valuePrev.pcb = *pprop->m_value.pcb;
break;
default:
ASSERT( 0 ); // don't know how to deal with this type
} // switch: property format
} // for: each property
} // try
catch ( CException * pe )
{
pe->ReportError();
pe->Delete();
fSuccess = FALSE;
} // catch: CException
} // if: not just validating and successful so far
//
// Indicate we successfully saved the properties.
//
if ( ! fValidateOnlyIn && fSuccess )
{
m_bSaved = TRUE;
} // if: successfully saved data
return fSuccess;
} //*** CBasePropertyPage::BSetPrivateProps
void
LoginDialog::onAuthenticated( WsReply* reply )
{
switch (reply->error())
{
case Ws::NoError:
{
try
{
WsDomElement session = reply->lfm()["session"];
// replace username; because eg. perhaps the user typed their
// username with the wrong camel case
QString username = session.optional( "name" ).text();
if (username.size())
m_username = username;
m_sessionKey = session["key"].nonEmptyText();
m_subscriber = session["subscriber"].text() != "0";
accept();
#ifdef Q_WS_MAC
ui.text->setText( "<b>Authentication successful" );
#endif
break;
}
catch (std::runtime_error& e)
{
qWarning() << e.what();
}
// FALL THROUGH!
}
case Ws::AuthenticationFailed:
// COPYTODO
QMessageBoxBuilder( this )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Login Failed") )
.setText( tr("Sorry, we don't recognise that username, or you typed the password wrongly.") )
.exec();
break;
default:
// COPYTODO
QMessageBoxBuilder( this )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Last.fm Unavailable") )
.setText( tr("There was a problem communicating with the Last.fm services. Please try again later.") )
.exec();
break;
case Ws::UrProxyIsFuckedLol:
case Ws::UrLocalNetworkIsFuckedLol:
// TODO proxy prompting?
// COPYTODO
QMessageBoxBuilder( this )
.setIcon( QMessageBox::Critical )
.setTitle( tr("Cannot connect to Last.fm") )
.setText( tr("Last.fm cannot be reached. Please check your firewall or proxy settings.") )
.exec();
#ifdef WIN32
// show Internet Settings Control Panel
HMODULE h = LoadLibraryA( "InetCpl.cpl" );
if (!h) break;
BOOL (WINAPI *cpl)(HWND) = (BOOL (WINAPI *)(HWND)) GetProcAddress( h, "LaunchConnectionDialog" );
if (cpl) cpl( winId() );
FreeLibrary( h );
#endif
break;
}
#ifdef Q_WS_MAC
ui.transient->hide();
#else
// do last, otherwise it looks weird
ui.retranslateUi( this ); //resets Window title
ok()->setEnabled( true );
ui.spinner->hide();
#endif
}
