void
interrupts_info (SIM_DESC sd, struct interrupts *interrupts)
{
signed64 t;
sim_io_printf (sd, "Interrupts Info:\n");
sim_io_printf (sd, " Interrupts raised: %lu\n",
interrupts->nb_interrupts_raised);
if (interrupts->start_mask_cycle >= 0)
{
t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->start_mask_cycle;
if (t > interrupts->max_mask_cycles)
interrupts->max_mask_cycles = t;
sim_io_printf (sd, " Current interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
}
t = interrupts->min_mask_cycles == CYCLES_MAX ?
interrupts->max_mask_cycles :
interrupts->min_mask_cycles;
sim_io_printf (sd, " Shortest interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
t = interrupts->max_mask_cycles;
sim_io_printf (sd, " Longest interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
t = interrupts->last_mask_cycles;
sim_io_printf (sd, " Last interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
if (interrupts->xirq_start_mask_cycle >= 0)
{
t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->xirq_start_mask_cycle;
if (t > interrupts->xirq_max_mask_cycles)
interrupts->xirq_max_mask_cycles = t;
sim_io_printf (sd, " XIRQ Current interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
}
t = interrupts->xirq_min_mask_cycles == CYCLES_MAX ?
interrupts->xirq_max_mask_cycles :
interrupts->xirq_min_mask_cycles;
sim_io_printf (sd, " XIRQ Min interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
t = interrupts->xirq_max_mask_cycles;
sim_io_printf (sd, " XIRQ Max interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
t = interrupts->xirq_last_mask_cycles;
sim_io_printf (sd, " XIRQ Last interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t));
}
static unsigned
m68hc11eepr_io_write_buffer (struct hw *me,
const void *source,
int space,
unsigned_word base,
unsigned nr_bytes)
{
SIM_DESC sd;
struct m68hc11eepr *controller;
sim_cpu *cpu;
uint8 val;
HW_TRACE ((me, "write 0x%08lx %d", (long) base, (int) nr_bytes));
sd = hw_system (me);
controller = hw_data (me);
cpu = STATE_CPU (sd, 0);
/* Programming several bytes at a time is not possible. */
if (space != io_map && nr_bytes != 1)
{
sim_memory_error (cpu, SIM_SIGBUS, base,
"EEprom write error (only 1 byte can be programmed)");
return 0;
}
if (nr_bytes != 1)
hw_abort (me, "Cannot write more than 1 byte to EEPROM device at a time");
val = *((const uint8*) source);
/* Write to the EEPROM control register. */
if (space == io_map && base == M6811_PPROG)
{
uint8 wrong_bits;
uint16 addr;
addr = base + cpu_get_io_base (cpu);
/* Setting EELAT and EEPGM at the same time is an error.
Clearing them both is ok. */
wrong_bits = (cpu->ios[M6811_PPROG] ^ val) & val;
wrong_bits &= (M6811_EELAT | M6811_EEPGM);
if (wrong_bits == (M6811_EEPGM|M6811_EELAT))
{
sim_memory_error (cpu, SIM_SIGBUS, addr,
"Wrong eeprom programing value");
return 0;
}
if ((val & M6811_EELAT) == 0)
{
val = 0;
}
if ((val & M6811_EEPGM) && !(cpu->ios[M6811_PPROG] & M6811_EELAT))
{
sim_memory_error (cpu, SIM_SIGBUS, addr,
"EEProm high voltage applied after EELAT");
}
if ((val & M6811_EEPGM) && controller->eeprom_wmode == 0)
{
sim_memory_error (cpu, SIM_SIGSEGV, addr,
"EEProm high voltage applied without address");
}
if (val & M6811_EEPGM)
{
controller->eeprom_wcycle = cpu_current_cycle (cpu);
}
else if (cpu->ios[M6811_PPROG] & M6811_PPROG)
{
int i;
unsigned long t = cpu_current_cycle (cpu);
t -= controller->eeprom_wcycle;
if (t < controller->eeprom_min_cycles)
{
sim_memory_error (cpu, SIM_SIGILL, addr,
"EEprom programmed only for %lu cycles",
t);
}
/* Program the byte by clearing some bits. */
if (!(cpu->ios[M6811_PPROG] & M6811_ERASE))
{
controller->eeprom[controller->eeprom_waddr]
&= controller->eeprom_wbyte;
}
/* Erase a byte, row or the complete eeprom. Erased value is 0xFF.
Ignore row or complete eeprom erase when we are programming the
CONFIG register (last EEPROM byte). */
else if ((cpu->ios[M6811_PPROG] & M6811_BYTE)
|| controller->eeprom_waddr == controller->size - 1)
{
controller->eeprom[controller->eeprom_waddr] = 0xff;
}
else if (cpu->ios[M6811_BYTE] & M6811_ROW)
{
size_t max_size;
/* Size of EEPROM (-1 because the last byte is the
CONFIG register. */
max_size = controller->size;
controller->eeprom_waddr &= 0xFFF0;
for (i = 0; i < 16
&& controller->eeprom_waddr < max_size; i++)
{
controller->eeprom[controller->eeprom_waddr] = 0xff;
controller->eeprom_waddr ++;
}
}
else
{
size_t max_size;
max_size = controller->size;
for (i = 0; i < max_size; i++)
{
controller->eeprom[i] = 0xff;
}
}
/* Save the eeprom in a file. We have to save after each
change because the simulator can be stopped or crash... */
if (m6811eepr_memory_rw (controller, O_WRONLY | O_CREAT) != 0)
{
sim_memory_error (cpu, SIM_SIGABRT, addr,
"EEPROM programing failed: errno=%d", errno);
}
controller->eeprom_wmode = 0;
}
cpu->ios[M6811_PPROG] = val;
return 1;
}
/* The CONFIG IO register is mapped at end of EEPROM.
It's not visible. */
if (space == io_map && base == M6811_CONFIG)
{
base = controller->size - 1;
}
else
{
base = base - controller->base_address;
}
/* Writing the memory is allowed for the Debugger or simulator
(cpu not running). */
if (cpu_is_running (cpu))
{
if ((cpu->ios[M6811_PPROG] & M6811_EELAT) == 0)
{
sim_memory_error (cpu, SIM_SIGSEGV, base,
"EEprom not configured for writing");
return 0;
}
if (controller->eeprom_wmode != 0)
{
sim_memory_error (cpu, SIM_SIGSEGV, base,
"EEprom write error");
return 0;
}
controller->eeprom_wmode = 1;
controller->eeprom_waddr = base;
controller->eeprom_wbyte = val;
}
else
{
controller->eeprom[base] = val;
m6811eepr_memory_rw (controller, O_WRONLY);
}
return 1;
}
void
interrupts_info (SIM_DESC sd, struct interrupts *interrupts)
{
signed64 t, prev_interrupt;
int i;
sim_io_printf (sd, "Interrupts Info:\n");
sim_io_printf (sd, " Interrupts raised: %lu\n",
interrupts->nb_interrupts_raised);
if (interrupts->start_mask_cycle >= 0)
{
t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->start_mask_cycle;
if (t > interrupts->max_mask_cycles)
interrupts->max_mask_cycles = t;
sim_io_printf (sd, " Current interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
}
t = interrupts->min_mask_cycles == CYCLES_MAX ?
interrupts->max_mask_cycles :
interrupts->min_mask_cycles;
sim_io_printf (sd, " Shortest interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
t = interrupts->max_mask_cycles;
sim_io_printf (sd, " Longest interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
t = interrupts->last_mask_cycles;
sim_io_printf (sd, " Last interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
if (interrupts->xirq_start_mask_cycle >= 0)
{
t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->xirq_start_mask_cycle;
if (t > interrupts->xirq_max_mask_cycles)
interrupts->xirq_max_mask_cycles = t;
sim_io_printf (sd, " XIRQ Current interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
}
t = interrupts->xirq_min_mask_cycles == CYCLES_MAX ?
interrupts->xirq_max_mask_cycles :
interrupts->xirq_min_mask_cycles;
sim_io_printf (sd, " XIRQ Min interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
t = interrupts->xirq_max_mask_cycles;
sim_io_printf (sd, " XIRQ Max interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
t = interrupts->xirq_last_mask_cycles;
sim_io_printf (sd, " XIRQ Last interrupts masked sequence: %s\n",
cycle_to_string (interrupts->cpu, t,
PRINT_TIME | PRINT_CYCLE));
if (interrupts->pending_mask)
{
sim_io_printf (sd, " Pending interrupts : ");
for (i = 0; i < M6811_INT_NUMBER; i++)
{
enum M6811_INT int_number = interrupts->interrupt_order[i];
if (interrupts->pending_mask & (1 << int_number))
{
sim_io_printf (sd, "%s ", interrupt_names[int_number]);
}
}
sim_io_printf (sd, "\n");
}
prev_interrupt = 0;
sim_io_printf (sd, "N Interrupt Cycle Taken Latency"
" Delta between interrupts\n");
for (i = 0; i < MAX_INT_HISTORY; i++)
{
int which;
struct interrupt_history *h;
signed64 dt;
which = interrupts->history_index - i - 1;
if (which < 0)
which += MAX_INT_HISTORY;
h = &interrupts->interrupts_history[which];
if (h->taken_cycle == 0)
break;
dt = h->taken_cycle - h->raised_cycle;
sim_io_printf (sd, "%2d %-9.9s %15.15s ", i,
interrupt_names[h->type],
cycle_to_string (interrupts->cpu, h->taken_cycle, 0));
sim_io_printf (sd, "%15.15s",
cycle_to_string (interrupts->cpu, dt, 0));
if (prev_interrupt)
{
dt = prev_interrupt - h->taken_cycle;
sim_io_printf (sd, " %s",
cycle_to_string (interrupts->cpu, dt, PRINT_TIME));
}
sim_io_printf (sd, "\n");
prev_interrupt = h->taken_cycle;
}
}
/* Process the current interrupt if there is one. This operation must
be called after each instruction to handle the interrupts. If interrupts
are masked, it does nothing. */
int
interrupts_process (struct interrupts *interrupts)
{
int id;
uint8 ccr;
/* See if interrupts are enabled/disabled and keep track of the
number of cycles the interrupts are masked. Such information is
then reported by the info command. */
ccr = cpu_get_ccr (interrupts->cpu);
if (ccr & M6811_I_BIT)
{
if (interrupts->start_mask_cycle < 0)
interrupts->start_mask_cycle = cpu_current_cycle (interrupts->cpu);
}
else if (interrupts->start_mask_cycle >= 0
&& (ccr & M6811_I_BIT) == 0)
{
signed64 t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->start_mask_cycle;
if (t < interrupts->min_mask_cycles)
interrupts->min_mask_cycles = t;
if (t > interrupts->max_mask_cycles)
interrupts->max_mask_cycles = t;
interrupts->start_mask_cycle = -1;
interrupts->last_mask_cycles = t;
}
if (ccr & M6811_X_BIT)
{
if (interrupts->xirq_start_mask_cycle < 0)
interrupts->xirq_start_mask_cycle
= cpu_current_cycle (interrupts->cpu);
}
else if (interrupts->xirq_start_mask_cycle >= 0
&& (ccr & M6811_X_BIT) == 0)
{
signed64 t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->xirq_start_mask_cycle;
if (t < interrupts->xirq_min_mask_cycles)
interrupts->xirq_min_mask_cycles = t;
if (t > interrupts->xirq_max_mask_cycles)
interrupts->xirq_max_mask_cycles = t;
interrupts->xirq_start_mask_cycle = -1;
interrupts->xirq_last_mask_cycles = t;
}
id = interrupts_get_current (interrupts);
if (id >= 0)
{
uint16 addr;
struct interrupt_history *h;
/* Implement the breakpoint-on-interrupt. */
if (interrupts->interrupts[id].stop_mode & SIM_STOP_WHEN_TAKEN)
{
sim_io_printf (CPU_STATE (interrupts->cpu),
"Interrupt %s will be handled\n",
interrupt_names[id]);
sim_engine_halt (CPU_STATE (interrupts->cpu),
interrupts->cpu,
0, cpu_get_pc (interrupts->cpu),
sim_stopped,
SIM_SIGTRAP);
}
cpu_push_all (interrupts->cpu);
addr = memory_read16 (interrupts->cpu,
interrupts->vectors_addr + id * 2);
cpu_call (interrupts->cpu, addr);
/* Now, protect from nested interrupts. */
if (id == M6811_INT_XIRQ)
{
cpu_set_ccr_X (interrupts->cpu, 1);
}
else
{
cpu_set_ccr_I (interrupts->cpu, 1);
}
/* Update the interrupt history table. */
h = &interrupts->interrupts_history[interrupts->history_index];
h->type = id;
h->taken_cycle = cpu_current_cycle (interrupts->cpu);
h->raised_cycle = interrupts->interrupts[id].cpu_cycle;
if (interrupts->history_index >= MAX_INT_HISTORY-1)
interrupts->history_index = 0;
else
interrupts->history_index++;
interrupts->nb_interrupts_raised++;
cpu_add_cycles (interrupts->cpu, 14);
return 1;
}
return 0;
}
/* Update the mask of pending interrupts. This operation must be called
when the state of some 68HC11 IO register changes. It looks the
different registers that indicate a pending interrupt (timer, SCI, SPI,
...) and records the interrupt if it's there and enabled. */
void
interrupts_update_pending (struct interrupts *interrupts)
{
int i;
uint8 *ioregs;
unsigned long clear_mask;
unsigned long set_mask;
clear_mask = 0;
set_mask = 0;
ioregs = &interrupts->cpu->ios[0];
for (i = 0; i < TableSize(idefs); i++)
{
struct interrupt_def *idef = &idefs[i];
uint8 data;
/* Look if the interrupt is enabled. */
if (idef->enable_paddr)
{
data = ioregs[idef->enable_paddr];
if (!(data & idef->enabled_mask))
{
/* Disable it. */
clear_mask |= (1 << idef->int_number);
continue;
}
}
/* Interrupt is enabled, see if it's there. */
data = ioregs[idef->int_paddr];
if (!(data & idef->int_mask))
{
/* Disable it. */
clear_mask |= (1 << idef->int_number);
continue;
}
/* Ok, raise it. */
set_mask |= (1 << idef->int_number);
}
/* Some interrupts are shared (M6811_INT_SCI) so clear
the interrupts before setting the new ones. */
interrupts->pending_mask &= ~clear_mask;
interrupts->pending_mask |= set_mask;
/* Keep track of when the interrupt is raised by the device.
Also implements the breakpoint-on-interrupt. */
if (set_mask)
{
signed64 cycle = cpu_current_cycle (interrupts->cpu);
int must_stop = 0;
for (i = 0; i < M6811_INT_NUMBER; i++)
{
if (!(set_mask & (1 << i)))
continue;
interrupts->interrupts[i].cpu_cycle = cycle;
if (interrupts->interrupts[i].stop_mode & SIM_STOP_WHEN_RAISED)
{
must_stop = 1;
sim_io_printf (CPU_STATE (interrupts->cpu),
"Interrupt %s raised\n",
interrupt_names[i]);
}
}
if (must_stop)
sim_engine_halt (CPU_STATE (interrupts->cpu),
interrupts->cpu,
0, cpu_get_pc (interrupts->cpu),
sim_stopped,
SIM_SIGTRAP);
}
}
/* Process the current interrupt if there is one. This operation must
be called after each instruction to handle the interrupts. If interrupts
are masked, it does nothing. */
int
interrupts_process (struct interrupts *interrupts)
{
int id;
uint8 ccr;
/* See if interrupts are enabled/disabled and keep track of the
number of cycles the interrupts are masked. Such information is
then reported by the info command. */
ccr = cpu_get_ccr (interrupts->cpu);
if (ccr & M6811_I_BIT)
{
if (interrupts->start_mask_cycle < 0)
interrupts->start_mask_cycle = cpu_current_cycle (interrupts->cpu);
}
else if (interrupts->start_mask_cycle >= 0
&& (ccr & M6811_I_BIT) == 0)
{
signed64 t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->start_mask_cycle;
if (t < interrupts->min_mask_cycles)
interrupts->min_mask_cycles = t;
if (t > interrupts->max_mask_cycles)
interrupts->max_mask_cycles = t;
interrupts->start_mask_cycle = -1;
interrupts->last_mask_cycles = t;
}
if (ccr & M6811_X_BIT)
{
if (interrupts->xirq_start_mask_cycle < 0)
interrupts->xirq_start_mask_cycle
= cpu_current_cycle (interrupts->cpu);
}
else if (interrupts->xirq_start_mask_cycle >= 0
&& (ccr & M6811_X_BIT) == 0)
{
signed64 t = cpu_current_cycle (interrupts->cpu);
t -= interrupts->xirq_start_mask_cycle;
if (t < interrupts->xirq_min_mask_cycles)
interrupts->xirq_min_mask_cycles = t;
if (t > interrupts->xirq_max_mask_cycles)
interrupts->xirq_max_mask_cycles = t;
interrupts->xirq_start_mask_cycle = -1;
interrupts->xirq_last_mask_cycles = t;
}
id = interrupts_get_current (interrupts);
if (id >= 0)
{
uint16 addr;
cpu_push_all (interrupts->cpu);
addr = memory_read16 (interrupts->cpu,
interrupts->vectors_addr + id * 2);
cpu_call (interrupts->cpu, addr);
/* Now, protect from nested interrupts. */
if (id == M6811_INT_XIRQ)
{
cpu_set_ccr_X (interrupts->cpu, 1);
}
else
{
cpu_set_ccr_I (interrupts->cpu, 1);
}
interrupts->nb_interrupts_raised++;
cpu_add_cycles (interrupts->cpu, 14);
return 1;
}
return 0;
}
