t_stat cpu_user_20 (uint32 IR, uint32 intrq)
{
t_stat reason = SCPE_OK;
OPS op;
uint32 entry;
entry = IR & 017; /* mask to entry point */
if (op_user_20 [entry] != OP_N)
if (reason = cpu_ops (op_user_20 [entry], op, intrq)) /* get instruction operands */
return reason;
switch (entry) { /* decode IR<4:0> */
case 000: /* 10x400 */
/* break; /* uncomment to handle instruction */
case 001: /* 10x401 */
/* break; /* uncomment to handle instruction */
/* case 0nn: /* other cases as needed */
/* break; /* uncomment to handle instruction */
default: /* others undefined */
reason = stop_inst;
}
return reason;
}
t_stat cpu_ds (uint32 IR, uint32 intrq)
{
t_stat reason = SCPE_OK;
OPS op;
uint32 entry;
entry = IR & 017; /* mask to entry point */
if (op_ds[entry] != OP_N)
if (reason = cpu_ops (op_ds[entry], op, intrq)) /* get instruction operands */
return reason;
switch (entry) { /* decode IR<3:0> */
default: /* others undefined */
reason = stop_inst;
}
return reason;
}
t_stat cpu_signal (uint32 IR, uint32 intrq)
{
t_stat reason = SCPE_OK;
OPS op;
OP a,b,c,d,p1,p2,p3,p4,m1,m2,wr,wi;
uint32 entry, v, idx1, idx2;
int32 exc, exd;
entry = IR & 017; /* mask to entry point */
if (op_signal [entry] != OP_N) {
reason = cpu_ops (op_signal [entry], op, intrq); /* get instruction operands */
if (reason != SCPE_OK) /* evaluation failed? */
return reason; /* return reason for failure */
}
switch (entry) { /* decode IR<3:0> */
case 000: /* BITRV (OP_AAKK) */
/* BITRV
* bit reversal for FFT
* JSB BITRV
* DEF ret(,I) return address
* DEF vect,I base address of array
* DEF idx,I index bitmap to be reversed (one-based)
* DEF nbits,I number of bits of index
*
* Given a complex*8 vector of nbits (power of 2), this calculates:
* swap( vect[idx], vect[rev(idx)]) where rev(i) is the bitreversed value of i */
sig_bitrev(op[1].word, op[1].word+2, op[2].word-1, op[3].word, 4);
PR = op[0].word & VAMASK;
break;
case 001: /* BTRFY (OP_AAFFKK) */
/* BTRFY - butterfly operation
* JSB BTRFY
* DEF ret(,I) return address
* DEF vect(,I) complex*8 vector
* DEF wr,I real part of W
* DEF wi,I imag part of W
* DEF node,I index of 1st op (1 based)
* DEF lmax,I offset to 2nd op (0 based) */
sig_btrfy(op[1].word, op[1].word+2,
op[2], op[3],
2*(op[4].word-1), 2*op[5].word);
PR = op[0].word & VAMASK;
break;
case 002: /* UNSCR (OP_AAFFKK) */
/* UNSCR unscramble for phasor MPY
* JSB UNSCR
* DEF ret(,I)
* DEF vector,I
* DEF WR
* DEF WI
* DEF idx1,I
* DEF idx2,I */
v = op[1].word;
idx1 = 2 * (op[4].word - 1);
idx2 = 2 * (op[5].word - 1);
wr = op[2]; /* read WR */
wi = op[3]; /* read WI */
p1 = ReadOp(RE(v + idx1), fp_f); /* S1 VR[idx1] */
p2 = ReadOp(RE(v + idx2), fp_f); /* S2 VR[idx2] */
p3 = ReadOp(IM(v + idx1), fp_f); /* S9 VI[idx1] */
p4 = ReadOp(IM(v + idx2), fp_f); /* S10 VI[idx2] */
c = sig_scadd(000, TRUE, p3, p4); /* S5,6 0.5*(p3+p4) */
d = sig_scadd(020, TRUE, p2, p1); /* S7,8 0.5*(p2-p1) */
sig_cmul(&m1, &m2, wr, wi, c, d); /* (WR,WI) * (c,d) */
c = sig_scadd(000, TRUE, p1, p2); /* 0.5*(p1+p2) */
d = sig_scadd(020, TRUE, p3, p4); /* 0.5*(p3-p4) */
(void)fp_exec(000, &p1, c, m1); /* VR[idx1] := 0.5*(p1+p2) + real(W*(c,d)) */
WriteOp(RE(v + idx1), p1, fp_f);
(void)fp_exec(000, &p2, d, m2); /* VI[idx1] := 0.5*(p3-p4) + imag(W*(c,d)) */
WriteOp(IM(v + idx1), p2, fp_f);
(void)fp_exec(020, &p1, c, m1); /* VR[idx2] := 0.5*(p1+p2) - imag(W*(c,d)) */
WriteOp(RE(v + idx2), p1, fp_f);
(void)fp_exec(020, &p2, d, m2); /* VI[idx2] := 0.5*(p3-p4) - imag(W*(c,d)) */
WriteOp(IM(v + idx2), p2, fp_f);
PR = op[0].word & VAMASK;
break;
case 003: /* PRSCR (OP_AAFFKK) */
/* PRSCR unscramble for phasor MPY
* JSB PRSCR
* DEF ret(,I)
* DEF vector,I
* DEF WR
* DEF WI
* DEF idx1,I
* DEF idx2,I */
v = op[1].word;
idx1 = 2 * (op[4].word - 1);
idx2 = 2 * (op[5].word - 1);
wr = op[2]; /* read WR */
wi = op[3]; /* read WI */
p1 = ReadOp(RE(v + idx1), fp_f); /* VR[idx1] */
p2 = ReadOp(RE(v + idx2), fp_f); /* VR[idx2] */
p3 = ReadOp(IM(v + idx1), fp_f); /* VI[idx1] */
p4 = ReadOp(IM(v + idx2), fp_f); /* VI[idx2] */
c = sig_scadd(020, FALSE, p1, p2); /* p1-p2 */
d = sig_scadd(000, FALSE, p3, p4); /* p3+p4 */
sig_cmul(&m1,&m2, wr, wi, c, d); /* (WR,WI) * (c,d) */
c = sig_scadd(000, FALSE, p1, p2); /* p1+p2 */
d = sig_scadd(020, FALSE, p3,p4); /* p3-p4 */
(void)fp_exec(020, &p1, c, m2); /* VR[idx1] := (p1-p2) - imag(W*(c,d)) */
WriteOp(RE(v + idx1), p1, fp_f);
(void)fp_exec(000, &p2, d, m1); /* VI[idx1] := (p3-p4) + real(W*(c,d)) */
WriteOp(IM(v + idx1), p2, fp_f);
(void)fp_exec(000, &p1, c, m2); /* VR[idx2] := (p1+p2) + imag(W*(c,d)) */
WriteOp(RE(v + idx2), p1, fp_f);
(void)fp_exec(020, &p2, m1, d); /* VI[idx2] := imag(W*(c,d)) - (p3-p4) */
WriteOp(IM(v + idx2), p2, fp_f);
PR = op[0].word & VAMASK;
break;
case 004: /* BITR1 (OP_AAAKK) */
/* BITR1
* bit reversal for FFT, alternative version
* JSB BITR1
* DEF ret(,I) return address if already swapped
* DEF revect,I base address of real vect
* DEF imvect,I base address of imag vect
* DEF idx,I index bitmap to be reversed (one-based)
* DEF nbits,I number of bits of index
*
* Given a complex*8 vector of nbits (power of 2), this calculates:
* swap( vect[idx], vect[rev(idx)]) where rev(i) is the bitreversed value of i
*
* difference to BITRV is that BITRV uses complex*8, and BITR1 uses separate real*4
* vectors for Real and Imag parts */
sig_bitrev(op[1].word, op[2].word, op[3].word-1, op[4].word, 2);
PR = op[0].word & VAMASK;
break;
case 005: /* BTRF1 (OP_AAAFFKK) */
/* BTRF1 - butterfly operation with real*4 vectors
* JSB BTRF1
* DEF ret(,I) return address
* DEF rvect,I real part of vector
* DEF ivect,I imag part of vector
* DEF wr,I real part of W
* DEF wi,I imag part of W
* DEF node,I index (1 based)
* DEF lmax,I index (0 based) */
sig_btrfy(op[1].word, op[2].word,
op[3], op[4],
op[5].word-1, op[6].word);
PR = op[0].word & VAMASK;
break;
case 006: /* .CADD (OP_AAA) */
/* .CADD Complex addition
* JSB .CADD
* DEF result,I
* DEF oprd1,I
* DEF oprd2,I
* complex addition is: (a+bi) + (c+di) => (a+c) + (b+d)i */
sig_caddsub(000,op);
break;
case 007: /* .CSUB (OP_AAA) */
/* .CSUB Complex subtraction
* JSB .CSUB
* DEF result,I
* DEF oprd1,I
* DEF oprd2,I
* complex subtraction is: (a+bi) - (c+di) => (a - c) + (b - d)i */
sig_caddsub(020,op);
break;
case 010: /* .CMUL (OP_AAA) */
/* .CMPY Complex multiplication
* call:
* JSB .CMPY
* DEF result,I
* DEF oprd1,I
* DEF oprd2,I
* complex multiply is: (a+bi)*(c+di) => (ac-bd) + (ad+bc)i */
a = ReadOp(RE(op[1].word), fp_f); /* read 1st op */
b = ReadOp(IM(op[1].word), fp_f);
c = ReadOp(RE(op[2].word), fp_f); /* read 2nd op */
d = ReadOp(IM(op[2].word), fp_f);
sig_cmul(&p1, &p2, a, b, c, d);
WriteOp(RE(op[0].word), p1, fp_f); /* write real result */
WriteOp(IM(op[0].word), p2, fp_f); /* write imag result */
break;
case 011: /* .CDIV (OP_AAA) */
/* .CDIV Complex division
* call:
* JSB .CDIV
* DEF result,I
* DEF oprd1,I
* DEF oprd2,I
* complex division is: (a+bi)/(c+di) => ((ac+bd) + (bc-ad)i)/(c^2+d^2) */
a = ReadOp(RE(op[1].word), fp_f); /* read 1st op */
b = ReadOp(IM(op[1].word), fp_f);
c = ReadOp(RE(op[2].word), fp_f); /* read 2nd op */
d = ReadOp(IM(op[2].word), fp_f);
(void)fp_unpack (NULL, &exc, c, fp_f); /* get exponents */
(void)fp_unpack (NULL, &exd, d, fp_f);
if (exc < exd) { /* ensure c/d < 1 */
p1 = a; a = c; c = p1; /* swap dividend and divisor */
p1 = b; b = d; d = p1;
}
(void)fp_exec(060, &p1, d, c); /* p1,accu := d/c */
(void)fp_exec(044, ACCUM, d, NOP); /* ACCUM := dd/c */
(void)fp_exec(004, &p2, c, NOP); /* p2 := c + dd/c */
(void)fp_exec(040, ACCUM, b, p1); /* ACCUM := bd/c */
(void)fp_exec(004, ACCUM, a, NOP); /* ACCUM := a + bd/c */
(void)fp_exec(070, &p3, NOP, p2); /* p3 := (a+bd/c)/(c+dd/c) == (ac+bd)/(cc+dd) */
WriteOp(RE(op[0].word), p3, fp_f); /* Write real result */
(void)fp_exec(040, ACCUM, a, p1); /* ACCUM := ad/c */
(void)fp_exec(030, ACCUM, NOP, b); /* ACCUM := ad/c - b */
if (exd < exc) { /* was not swapped? */
(void)fp_exec(024, ACCUM, zero, NOP); /* ACCUM := -ACCUM */
}
(void)fp_exec(070, &p3, NOP, p2); /* p3 := (b-ad/c)/(c+dd/c) == (bc-ad)/cc+dd) */
WriteOp(IM(op[0].word), p3, fp_f); /* Write imag result */
break;
case 012: /* CONJG (OP_AAA) */
/* CONJG build A-Bi from A+Bi
* call:
* JSB CONJG
* DEF RTN
* DEF res,I result
* DEF arg,I input argument */
a = ReadOp(RE(op[2].word), fp_f); /* read real */
b = ReadOp(IM(op[2].word), fp_f); /* read imag */
(void)fp_pcom(&b, fp_f); /* negate imag */
WriteOp(RE(op[1].word), a, fp_f); /* write real */
WriteOp(IM(op[1].word), b, fp_f); /* write imag */
break;
case 013: /* ..CCM (OP_A) */
/* ..CCM complement complex
* call
* JSB ..CCM
* DEF arg
* build (-RE,-IM)
*/
v = op[0].word;
a = ReadOp(RE(v), fp_f); /* read real */
b = ReadOp(IM(v), fp_f); /* read imag */
(void)fp_pcom(&a, fp_f); /* negate real */
(void)fp_pcom(&b, fp_f); /* negate imag */
WriteOp(RE(v), a, fp_f); /* write real */
WriteOp(IM(v), b, fp_f); /* write imag */
break;
case 014: /* AIMAG (OP_AA) */
/* AIMAG return the imaginary part in AB
* JSB AIMAG
* DEF *+2
* DEF cplx(,I)
* returns: AB imaginary part of complex number */
a = ReadOp(IM(op[1].word), fp_f); /* read imag */
AR = a.fpk[0]; /* move MSB to A */
BR = a.fpk[1]; /* move LSB to B */
break;
case 015: /* CMPLX (OP_AFF) */
/* CMPLX form a complex number
* JSB CMPLX
* DEF *+4
* DEF result,I complex number
* DEF repart,I real value
* DEF impart,I imaginary value */
WriteOp(RE(op[1].word), op[2], fp_f); /* write real part */
WriteOp(IM(op[1].word), op[3], fp_f); /* write imag part */
break;
case 017: /* [slftst] (OP_N) */
XR = 2; /* firmware revision */
SR = 0102077; /* test passed code */
PR = (PR + 1) & VAMASK; /* P+2 return for firmware w/SIGNAL1000 */
break;
case 016: /* invalid */
default: /* others unimplemented */
reason = STOP (cpu_ss_unimpl);
}
return reason;
}
t_stat cpu_vis (uint32 IR, uint32 intrq)
{
static const char *const difficulty [2] = { "hard", "easy" };
t_stat reason = SCPE_OK;
OPS op;
OP_PAT pattern;
OPSIZE opsize;
uint32 entry, subcode;
HP_WORD rtn = 0;
opsize = (IR & 004000) ? fp_t : fp_f; /* double or single precision */
entry = IR & 017; /* mask to entry point */
pattern = op_vis [entry];
if (entry == 0) { /* retrieve sub opcode */
subcode = ReadF (PR); /* get it */
if (subcode & 0100000) /* special property of ucode */
subcode = AR; /* for reentry */
PR = (PR + 1) & VAMASK; /* bump to real argument list */
pattern = (subcode & 0400) ? OP_AAKAKK : OP_AKAKAKK; /* scalar or vector operation */
}
if (pattern != OP_N) {
if (op_ftnret [entry]) { /* most VIS instrs ignore RTN addr */
rtn = ReadF (PR); /* get it */
PR = (PR + 1) & VAMASK; /* move to next argument */
}
reason = cpu_ops (pattern, op, intrq); /* get instruction operands */
if (reason != SCPE_OK) /* evaluation failed? */
return reason; /* return reason for failure */
}
switch (entry) { /* decode IR<3:0> */
case 000: /* .VECT (OP_special) */
if (subcode & 0400)
vis_svop(subcode,op,opsize); /* scalar/vector op */
else
vis_vvop(subcode,op,opsize); /* vector/vector op */
break;
case 001: /* VPIV (OP_(A)AAKAKAKK) */
vis_vpiv(op,opsize);
break;
case 002: /* VABS (OP_(A)AKAKK) */
vis_vabs(op,opsize);
break;
case 003: /* VSUM (OP_(A)AAKK) */
vis_vsmnm(op,opsize,FALSE);
break;
case 004: /* VNRM (OP_(A)AAKK) */
vis_vsmnm(op,opsize,TRUE);
break;
case 005: /* VDOT (OP_(A)AAKAKK) */
vis_vdot(op,opsize);
break;
case 006: /* VMAX (OP_(A)AAKK) */
vis_minmax(op,opsize,TRUE,FALSE);
break;
case 007: /* VMAB (OP_(A)AAKK) */
vis_minmax(op,opsize,TRUE,TRUE);
break;
case 010: /* VMIN (OP_(A)AAKK) */
vis_minmax(op,opsize,FALSE,FALSE);
break;
case 011: /* VMIB (OP_(A)AAKK) */
vis_minmax(op,opsize,FALSE,TRUE);
break;
case 012: /* VMOV (OP_(A)AKAKK) */
vis_movswp(op,opsize,FALSE);
break;
case 013: /* VSWP (OP_(A)AKAKK) */
vis_movswp(op,opsize,TRUE);
break;
case 014: /* .ERES (OP_(A)AA) */
PR = rtn;
reason = cpu_ema_eres(&PR,op[2].word,PR); /* handle the ERES instruction */
tprintf (cpu_dev, TRACE_OPND, OPND_FORMAT " return location is P+%u (%s)\n",
PR, IR, PR - err_PC, fmt_ab (PR - rtn));
break;
case 015: /* .ESEG (OP_(A)A) */
PR = rtn;
reason = cpu_ema_eseg(&PR,IR,op[0].word); /* handle the ESEG instruction */
tprintf (cpu_dev, TRACE_OPND, OPND_FORMAT " return location is P+%u (%s)\n",
PR, IR, PR - err_PC, fmt_ab (PR - rtn));
break;
case 016: /* .VSET (OP_(A)AAACCC) */
PR = rtn;
reason = cpu_ema_vset(&PR,op);
tprintf (cpu_dev, TRACE_OPND, OPND_FORMAT " return location is P+%u (%s)\n",
PR, IR, PR - err_PC,
(PR == rtn
? fmt_ab (0)
: difficulty [PR - rtn - 1]));
break;
case 017: /* [test] (OP_N) */
XR = 3; /* firmware revision */
SR = 0102077; /* test passed code */
PR = (PR + 1) & VAMASK; /* P+2 return for firmware w/VIS */
break;
default: /* others unimplemented */
reason = STOP (cpu_ss_unimpl);
}
return reason;
}