/**
* Send the current tilesort tile info to all the servers.
*/
void
tilesortspuSendTileInfoToServers( WindowInfo *winInfo )
{
GET_THREAD(thread);
int i;
/* release geometry buffer */
crPackReleaseBuffer( thread->packer );
/* loop over servers */
for (i = 0; i < tilesort_spu.num_servers; i++)
{
ServerWindowInfo *servWinInfo = winInfo->server + i;
int tileInfo[4 + 4 * CR_MAX_EXTENTS], arraySize;
int j;
/* build tileInfo array */
tileInfo[0] = i;
tileInfo[1] = winInfo->muralWidth;
tileInfo[2] = winInfo->muralHeight;
tileInfo[3] = servWinInfo->num_extents;
for (j = 0; j < servWinInfo->num_extents; j++)
{
int w = servWinInfo->extents[j].x2 - servWinInfo->extents[j].x1;
int h = servWinInfo->extents[j].y2 - servWinInfo->extents[j].y1;
tileInfo[4 + j * 4 + 0] = servWinInfo->extents[j].x1;
tileInfo[4 + j * 4 + 1] = servWinInfo->extents[j].y1;
tileInfo[4 + j * 4 + 2] = w;
tileInfo[4 + j * 4 + 3] = h;
}
arraySize = 4 + 4 * servWinInfo->num_extents;
/* pack/send to server[i] */
crPackSetBuffer( thread->packer, &(thread->buffer[i]) );
if (tilesort_spu.swap)
crPackChromiumParametervCRSWAP(GL_TILE_INFO_CR, GL_INT,
arraySize, tileInfo);
else
crPackChromiumParametervCR(GL_TILE_INFO_CR, GL_INT,
arraySize, tileInfo);
/* release server buffer */
crPackReleaseBuffer( thread->packer );
}
/* Restore default buffer */
crPackSetBuffer( thread->packer, &(thread->geometry_buffer) );
}
void crPackSetBuffer( CRPackContext *pc, CRPackBuffer *buffer )
{
CRASSERT( pc );
CRASSERT( buffer );
if (pc->currentBuffer == buffer)
return; /* re-bind is no-op */
if (pc->currentBuffer) {
/* Another buffer currently bound to this packer (shouldn't normally occur)
* Release it. Fixes Ensight issue.
*/
crPackReleaseBuffer(pc);
}
CRASSERT( pc->currentBuffer == NULL); /* release if NULL? */
CRASSERT( buffer->context == NULL );
/* bind context to buffer */
pc->currentBuffer = buffer;
buffer->context = pc;
/* update the context's packing fields with those from the buffer */
pc->buffer = *buffer; /* struct copy */
}
void REPLICATESPU_APIENTRY replicatespu_End( void )
{
GET_THREAD(thread);
CRPackBuffer *buf = &thread->BeginEndBuffer;
if ( thread->server.conn->Barf &&
(thread->BeginEndMode == GL_LINES
|| thread->BeginEndMode == GL_TRIANGLES
|| thread->BeginEndMode == GL_QUADS
|| thread->BeginEndMode == GL_POLYGON ) )
{
CRASSERT(buf->pack);
crPackReleaseBuffer( thread->packer );
crPackSetBuffer( thread->packer, &thread->normBuffer );
if ( !crPackCanHoldBuffer( buf ) )
replicatespuFlush( (void *) thread );
crPackAppendBuffer( buf );
crNetFree( thread->server.conn, buf->pack );
buf->pack = NULL;
}
if (thread->currentContext->displayListMode != GL_FALSE) {
crDLMCompileEnd();
}
if (replicate_spu.swap)
{
crPackEndSWAP();
}
else
{
crPackEnd();
}
}
/**
* Examine the server tile boundaries to compute the overall max
* viewport dims. Then send those dims to the servers.
*
* XXX \todo This isn't used!?!
*/
void
tilesortspuComputeMaxViewport(WindowInfo *winInfo)
{
ThreadInfo *thread0 = &(tilesort_spu.thread[0]);
GLint totalDims[2];
int i;
/* release geometry buffer, if it's bound */
crPackReleaseBuffer( thread0->packer );
/*
* It's hard to say what the max viewport size should be.
* We've changed this computation a few times now.
* For now, we set it to twice the mural size, or at least 4K.
* One problem is that the mural size can change dynamically...
*/
totalDims[0] = 2 * winInfo->muralWidth;
totalDims[1] = 2 * winInfo->muralHeight;
if (totalDims[0] < 4096)
totalDims[0] = 4096;
if (totalDims[1] < 4096)
totalDims[1] = 4096;
tilesort_spu.limits.maxViewportDims[0] = totalDims[0];
tilesort_spu.limits.maxViewportDims[1] = totalDims[1];
/*
* Once we've computed the maximum viewport size, we send
* a message to each server with its new viewport parameters.
*/
for (i = 0; i < tilesort_spu.num_servers; i++)
{
crPackSetBuffer( thread0->packer, &(thread0->buffer[i]) );
if (tilesort_spu.swap)
crPackChromiumParametervCRSWAP(GL_SET_MAX_VIEWPORT_CR, GL_INT, 2, totalDims);
else
crPackChromiumParametervCR(GL_SET_MAX_VIEWPORT_CR, GL_INT, 2, totalDims);
/* release server buffer */
crPackReleaseBuffer( thread0->packer );
/* Flush buffer (send to server) */
tilesortspuSendServerBuffer( i );
}
}
/*
* This is called from either the Pack SPU and the packer library whenever
* we need to send a data buffer to the server.
*/
void
packspuFlush(void *arg )
{
ThreadInfo *thread = (ThreadInfo *) arg;
ContextInfo *ctx;
unsigned int len;
CRMessageOpcodes *hdr;
CRPackBuffer *buf;
/* we should _always_ pass a valid <arg> value */
CRASSERT(thread);
ctx = thread->currentContext;
buf = &(thread->buffer);
CRASSERT(buf);
/* We're done packing into the current buffer, unbind it */
crPackReleaseBuffer( thread->packer );
/*
printf("%s thread=%p thread->id = %d thread->pc=%p t2->id=%d t2->pc=%p packbuf=%p packbuf=%p\n",
__FUNCTION__, (void*) thread, (int) thread->id, thread->packer,
(int) t2->id, t2->packer,
buf->pack, thread->packer->buffer.pack);
*/
if ( buf->opcode_current == buf->opcode_start ) {
/*
printf("%s early return\n", __FUNCTION__);
*/
/* XXX these calls seem to help, but might be appropriate */
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
return;
}
hdr = __prependHeader( buf, &len, 0 );
CRASSERT( thread->netServer.conn );
if ( buf->holds_BeginEnd )
crNetBarf( thread->netServer.conn, &(buf->pack), hdr, len );
else
crNetSend( thread->netServer.conn, &(buf->pack), hdr, len );
buf->pack = crNetAlloc( thread->netServer.conn );
/* The network may have found a new mtu */
buf->mtu = thread->netServer.conn->mtu;
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
(void) arg;
}
static void DoVertex( void )
{
GET_THREAD(thread);
CRPackBuffer *buf = &thread->BeginEndBuffer;
CRPackBuffer *gbuf = &thread->normBuffer;
int num_data;
int num_opcode;
/*crDebug( "really doing Vertex" );*/
crPackReleaseBuffer( thread->packer );
num_data = buf->data_current - buf->data_start;
num_opcode = buf->opcode_start - buf->opcode_current;
crPackSetBuffer( thread->packer, gbuf );
if ( !crPackCanHoldBuffer( buf ) )
/* doesn't hold, first flush gbuf*/
replicatespuFlush( (void *) thread );
crPackAppendBuffer( buf );
crPackReleaseBuffer( thread->packer );
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
}
/*
* This is called by the packer when the packer's buffer is full and
* it needs to be emptied.
* This function is registered as a callback with crPackFlushFunc().
*/
void hiddenlineFlush( void *arg )
{
GET_CONTEXT(context);
CRPackBuffer *buf;
CRASSERT(context);
buf = &(context->pack_buffer);
/* release previous buffer if any */
crPackReleaseBuffer( context->packer );
hiddenlineRecord( buf->pack, buf->data_start, buf->opcode_start, buf->opcode_start - buf->opcode_current , 1 );
hiddenlineProvidePackBuffer();
(void) arg;
}
/*
* This is called from either replicatespuFlushAll or the packer library
* whenever we need to send a data buffer to the servers.
*/
void replicatespuFlush(void *arg )
{
ThreadInfo *thread = (ThreadInfo *) arg;
unsigned int len;
CRMessageOpcodes *hdr;
CRPackBuffer *buf;
unsigned int i;
/* we should _always_ pass a valid <arg> value */
CRASSERT(thread);
buf = &(thread->buffer);
CRASSERT(buf);
CRASSERT(buf->pack);
crPackReleaseBuffer( thread->packer );
if ( buf->opcode_current == buf->opcode_start ) {
/* XXX these calls seem to help, but might be appropriate */
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
return;
}
hdr = __prependHeader( buf, &len, 0 );
/* Now send it to all our replicants */
for (i = 1; i < CR_MAX_REPLICANTS; i++)
{
if (IS_CONNECTED(replicate_spu.rserver[i].conn))
{
crNetSend( replicate_spu.rserver[i].conn, NULL, hdr, len );
}
}
/* The network may have found a new mtu */
buf->mtu = thread->server.conn->mtu;
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
}
/**
* Flush buffered commands, sending them to just one server
*/
void
replicatespuFlushOne(ThreadInfo *thread, int server)
{
unsigned int len;
CRMessageOpcodes *hdr;
CRPackBuffer *buf;
CRConnection *conn;
CRASSERT(server >= 0);
CRASSERT(server < CR_MAX_REPLICANTS);
CRASSERT(thread);
buf = &(thread->buffer);
CRASSERT(buf);
CRASSERT(buf->pack);
crPackReleaseBuffer( thread->packer );
if ( buf->opcode_current == buf->opcode_start ) {
/* XXX these calls seem to help, but might be appropriate */
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
return;
}
hdr = __prependHeader( buf, &len, 0 );
conn = replicate_spu.rserver[server].conn;
CRASSERT(conn);
if (conn->type != CR_NO_CONNECTION) {
crNetSend( conn, NULL, hdr, len );
}
/* The network may have found a new mtu */
buf->mtu = thread->server.conn->mtu;
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
}
void REPLICATESPU_APIENTRY replicatespu_Begin( GLenum mode )
{
GET_THREAD(thread);
CRPackBuffer *buf = &thread->BeginEndBuffer;
CRASSERT( mode >= GL_POINTS && mode <= GL_POLYGON );
if (thread->currentContext->displayListMode != GL_FALSE) {
crDLMCompileBegin(mode);
}
if (replicate_spu.swap)
{
crPackBeginSWAP( mode );
}
else
{
crPackBegin( mode );
}
if ( thread->server.conn->Barf ) {
thread->BeginEndMode = mode;
thread->BeginEndState = -1;
if ( mode == GL_LINES || mode == GL_TRIANGLES || mode == GL_QUADS || mode == GL_POLYGON )
{
CRASSERT(!buf->pack);
crPackReleaseBuffer( thread->packer );
buf->pack = crNetAlloc( thread->server.conn );
crPackInitBuffer( buf, buf->pack, thread->server.conn->buffer_size, thread->server.conn->mtu );
buf->holds_BeginEnd = 1;
buf->in_BeginEnd = 1;
crPackSetBuffer( thread->packer, buf );
thread->BeginEndState = 0;
}
}
}
/**
* Implementation of glClean for tilesorter
* \param mask
*/
void TILESORTSPU_APIENTRY tilesortspu_Clear( GLbitfield mask )
{
GET_THREAD(thread);
GLenum dlMode = thread->currentContext->displayListMode;
WindowInfo *winInfo = thread->currentContext->currentWindow;
/* This is a good place to check for new tiling geometry when
* the DMX window is changed.
*/
#ifdef USE_DMX
if (tilesort_spu.trackWindowPosition && !dlMode) {
if (winInfo->isDMXWindow && winInfo->xwin) {
if (tilesortspuUpdateWindowInfo(winInfo)) {
tilesortspuGetNewTiling(winInfo);
}
}
}
if (winInfo->newBackendWindows) {
tilesortspuGetNewTiling(winInfo);
}
#endif
if (dlMode != GL_FALSE) {
/* just creating and/or compiling display lists */
if (tilesort_spu.lazySendDLists)
crDLMCompileClear(mask);
else if (tilesort_spu.swap)
crPackClearSWAP(mask);
else
crPackClear(mask);
return;
}
if (winInfo->passiveStereo) {
/* only send Clear to left/right servers */
int i;
tilesortspuFlush( thread );
crPackReleaseBuffer( thread->packer );
/* Send glClear command to those servers designated as left/right
* which match the current glDrawBuffer setting (stereo).
*/
for (i = 0; i < tilesort_spu.num_servers; i++)
{
const ServerWindowInfo *servWinInfo = winInfo->server + i;
if (servWinInfo->eyeFlags & thread->currentContext->stereoDestFlags) {
crPackSetBuffer( thread->packer, &(thread->buffer[i]) );
if (tilesort_spu.swap)
crPackClearSWAP(mask);
else
crPackClear(mask);
crPackReleaseBuffer( thread->packer );
tilesortspuSendServerBuffer( i );
}
}
/* Restore the default pack buffer */
crPackSetBuffer( thread->packer, &(thread->geometry_buffer) );
}
else {
/* not doing stereo, truly broadcast glClear */
tilesortspuFlush( thread );
if (tilesort_spu.swap)
crPackClearSWAP( mask );
else
crPackClear( mask );
tilesortspuBroadcastGeom(GL_TRUE);
}
}
/*
* This is called from either the Pack SPU and the packer library whenever
* we need to send a data buffer to the server.
*/
void packspuFlush(void *arg )
{
ThreadInfo *thread = (ThreadInfo *) arg;
ContextInfo *ctx;
unsigned int len;
CRMessageOpcodes *hdr;
CRPackBuffer *buf;
/* we should _always_ pass a valid <arg> value */
CRASSERT(thread && thread->inUse);
#ifdef CHROMIUM_THREADSAFE
CR_LOCK_PACKER_CONTEXT(thread->packer);
#endif
ctx = thread->currentContext;
buf = &(thread->buffer);
CRASSERT(buf);
if (ctx && ctx->fCheckZerroVertAttr)
crStateCurrentRecoverNew(ctx->clientState, &thread->packer->current);
/* We're done packing into the current buffer, unbind it */
crPackReleaseBuffer( thread->packer );
/*
printf("%s thread=%p thread->id = %d thread->pc=%p t2->id=%d t2->pc=%p packbuf=%p packbuf=%p\n",
__FUNCTION__, (void*) thread, (int) thread->id, thread->packer,
(int) t2->id, t2->packer,
buf->pack, thread->packer->buffer.pack);
*/
if ( buf->opcode_current == buf->opcode_start ) {
/*
printf("%s early return\n", __FUNCTION__);
*/
/* XXX these calls seem to help, but might be appropriate */
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
#ifdef CHROMIUM_THREADSAFE
CR_UNLOCK_PACKER_CONTEXT(thread->packer);
#endif
return;
}
hdr = __prependHeader( buf, &len, 0 );
CRASSERT( thread->netServer.conn );
if ( buf->holds_BeginEnd )
{
/*crDebug("crNetBarf %d, (%d)", len, buf->size);*/
crNetBarf( thread->netServer.conn, &(buf->pack), hdr, len );
}
else
{
/*crDebug("crNetSend %d, (%d)", len, buf->size);*/
crNetSend( thread->netServer.conn, &(buf->pack), hdr, len );
}
buf->pack = crNetAlloc( thread->netServer.conn );
/* The network may have found a new mtu */
buf->mtu = thread->netServer.conn->mtu;
crPackSetBuffer( thread->packer, buf );
crPackResetPointers(thread->packer);
#ifdef CHROMIUM_THREADSAFE
CR_UNLOCK_PACKER_CONTEXT(thread->packer);
#endif
}
