int DCR::check_volume_label(bool &ask, bool &autochanger)
{
int vol_label_status;
/*
* If we are writing to a stream device, ASSUME the volume label
* is correct.
*/
if (dev->has_cap(CAP_STREAM)) {
vol_label_status = VOL_OK;
create_volume_label(dev, VolumeName, "Default", false /* not DVD */);
dev->VolHdr.LabelType = PRE_LABEL;
} else {
vol_label_status = read_dev_volume_label(this);
}
if (job_canceled(jcr)) {
goto check_bail_out;
}
Dmsg2(150, "Want dirVol=%s dirStat=%s\n", VolumeName,
VolCatInfo.VolCatStatus);
/*
* At this point, dev->VolCatInfo has what is in the drive, if anything,
* and dcr->VolCatInfo has what the Director wants.
*/
switch (vol_label_status) {
case VOL_OK:
Dmsg1(150, "Vol OK name=%s\n", dev->VolHdr.VolumeName);
dev->VolCatInfo = VolCatInfo; /* structure assignment */
break; /* got a Volume */
case VOL_NAME_ERROR:
VOLUME_CAT_INFO dcrVolCatInfo, devVolCatInfo;
char saveVolumeName[MAX_NAME_LENGTH];
Dmsg2(150, "Vol NAME Error Have=%s, want=%s\n", dev->VolHdr.VolumeName, VolumeName);
if (dev->is_volume_to_unload()) {
ask = true;
goto check_next_volume;
}
/* If not removable, Volume is broken */
if (!dev->is_removable()) {
Jmsg(jcr, M_WARNING, 0, _("Volume \"%s\" not on device %s.\n"),
VolumeName, dev->print_name());
mark_volume_in_error();
goto check_next_volume;
}
/*
* OK, we got a different volume mounted. First save the
* requested Volume info (dcr) structure, then query if
* this volume is really OK. If not, put back the desired
* volume name, mark it not in changer and continue.
*/
dcrVolCatInfo = VolCatInfo; /* structure assignment */
devVolCatInfo = dev->VolCatInfo; /* structure assignment */
/* Check if this is a valid Volume in the pool */
bstrncpy(saveVolumeName, VolumeName, sizeof(saveVolumeName));
bstrncpy(VolumeName, dev->VolHdr.VolumeName, sizeof(VolumeName));
if (!dir_get_volume_info(this, GET_VOL_INFO_FOR_WRITE)) {
POOL_MEM vol_info_msg;
pm_strcpy(vol_info_msg, jcr->dir_bsock->msg); /* save error message */
/* Restore desired volume name, note device info out of sync */
/* This gets the info regardless of the Pool */
bstrncpy(VolumeName, dev->VolHdr.VolumeName, sizeof(VolumeName));
if (autochanger && !dir_get_volume_info(this, GET_VOL_INFO_FOR_READ)) {
/*
* If we get here, we know we cannot write on the Volume,
* and we know that we cannot read it either, so it
* is not in the autochanger.
*/
mark_volume_not_inchanger();
}
dev->VolCatInfo = devVolCatInfo; /* structure assignment */
dev->set_unload(); /* unload this volume */
Jmsg(jcr, M_WARNING, 0, _("Director wanted Volume \"%s\".\n"
" Current Volume \"%s\" not acceptable because:\n"
" %s"),
dcrVolCatInfo.VolCatName, dev->VolHdr.VolumeName,
vol_info_msg.c_str());
ask = true;
/* Restore saved DCR before continuing */
bstrncpy(VolumeName, saveVolumeName, sizeof(VolumeName));
VolCatInfo = dcrVolCatInfo; /* structure assignment */
goto check_next_volume;
}
/*
* This was not the volume we expected, but it is OK with
* the Director, so use it.
*/
Dmsg1(150, "Got new Volume name=%s\n", VolumeName);
dev->VolCatInfo = VolCatInfo; /* structure assignment */
Dmsg1(100, "Call reserve_volume=%s\n", dev->VolHdr.VolumeName);
if (reserve_volume(this, dev->VolHdr.VolumeName) == NULL) {
Jmsg2(jcr, M_WARNING, 0, _("Could not reserve volume %s on %s\n"),
dev->VolHdr.VolumeName, dev->print_name());
ask = true;
goto check_next_volume;
}
break; /* got a Volume */
/*
* At this point, we assume we have a blank tape mounted.
*/
case VOL_IO_ERROR:
if (dev->is_dvd()) {
Jmsg(jcr, M_FATAL, 0, "%s", jcr->errmsg);
mark_volume_in_error();
goto check_bail_out; /* we could not write on DVD */
}
/* Fall through wanted */
case VOL_NO_LABEL:
switch (try_autolabel(true)) {
case try_next_vol:
goto check_next_volume;
case try_read_vol:
goto check_read_volume;
case try_error:
goto check_bail_out;
case try_default:
break;
}
/* NOTE! Fall-through wanted. */
case VOL_NO_MEDIA:
default:
Dmsg0(200, "VOL_NO_MEDIA or default.\n");
/* Send error message */
if (!dev->poll) {
} else {
Dmsg1(200, "Msg suppressed by poll: %s\n", jcr->errmsg);
}
ask = true;
/* Needed, so the medium can be changed */
if (dev->requires_mount()) {
dev->close();
}
goto check_next_volume;
}
return check_ok;
check_next_volume:
return check_next_vol;
check_bail_out:
return check_error;
check_read_volume:
return check_read_vol;
}
/*
* Write a Volume Label
* !!! Note, this is ONLY used for writing
* a fresh volume label. Any data
* after the label will be destroyed,
* in fact, we write the label 5 times !!!!
*
* This routine should be used only when labeling a blank tape.
*/
bool write_new_volume_label_to_dev(DCR *dcr, const char *VolName,
const char *PoolName, bool relabel)
{
JCR *jcr = dcr->jcr;
DEVICE *dev = dcr->dev;
DEV_BLOCK *block = dcr->block;
Dmsg0(150, "write_volume_label()\n");
if (*VolName == 0) {
Pmsg0(0, "=== ERROR: write_new_volume_label_to_dev called with NULL VolName\n");
goto bail_out;
}
if (relabel) {
volume_unused(dcr); /* mark current volume unused */
/* Truncate device */
if (!dev->truncate(dcr)) {
goto bail_out;
}
if (!dev->is_tape()) {
dev->close(dcr); /* make sure file closed for rename */
}
}
/* Set the new filename for open, ... */
dev->setVolCatName(VolName);
dcr->setVolCatName(VolName);
Dmsg1(150, "New VolName=%s\n", VolName);
if (!dev->open(dcr, OPEN_READ_WRITE)) {
/* If device is not tape, attempt to create it */
if (dev->is_tape() || !dev->open(dcr, CREATE_READ_WRITE)) {
Jmsg3(jcr, M_WARNING, 0, _("Open device %s Volume \"%s\" failed: ERR=%s\n"),
dev->print_name(), dcr->VolumeName, dev->bstrerror());
goto bail_out;
}
}
Dmsg1(150, "Label type=%d\n", dev->label_type);
/*
* Let any stored plugin know that we are about to write a new label to the volume.
*/
if (generate_plugin_event(jcr, bsdEventLabelWrite, dcr) != bRC_OK) {
Dmsg0(200, "Error from bsdEventLabelWrite plugin event.\n");
goto bail_out;
}
for ( ;; ) {
empty_block(block);
if (!dev->rewind(dcr)) {
Dmsg2(130, "Bad status on %s from rewind: ERR=%s\n", dev->print_name(), dev->print_errmsg());
if (!forge_on) {
goto bail_out;
}
}
/* Temporarily mark in append state to enable writing */
dev->set_append();
/* Create PRE_LABEL */
create_volume_label(dev, VolName, PoolName);
/*
* If we have already detected an ANSI label, re-read it
* to skip past it. Otherwise, we write a new one if
* so requested.
*/
if (dev->label_type != B_BAREOS_LABEL) {
if (read_ansi_ibm_label(dcr) != VOL_OK) {
dev->rewind(dcr);
goto bail_out;
}
} else if (!write_ansi_ibm_labels(dcr, ANSI_VOL_LABEL, VolName)) {
goto bail_out;
}
create_volume_label_record(dcr, dev, dcr->rec);
dcr->rec->Stream = 0;
dcr->rec->maskedStream = 0;
if (!write_record_to_block(dcr, dcr->rec)) {
Dmsg2(130, "Bad Label write on %s: ERR=%s\n", dev->print_name(), dev->print_errmsg());
goto bail_out;
} else {
Dmsg2(130, "Wrote label of %d bytes to %s\n", dcr->rec->data_len, dev->print_name());
}
Dmsg0(130, "Call write_block_to_dev()\n");
if (!dcr->write_block_to_dev()) {
Dmsg2(130, "Bad Label write on %s: ERR=%s\n", dev->print_name(), dev->print_errmsg());
goto bail_out;
}
break;
}
dev = dcr->dev;
Dmsg0(130, " Wrote block to device\n");
if (dev->weof(1)) {
dev->set_labeled();
write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
}
if (debug_level >= 20) {
dump_volume_label(dev);
}
Dmsg0(100, "Call reserve_volume\n");
if (reserve_volume(dcr, VolName) == NULL) {
Mmsg2(jcr->errmsg, _("Could not reserve volume %s on %s\n"),
dev->VolHdr.VolumeName, dev->print_name());
Dmsg1(100, "%s", jcr->errmsg);
goto bail_out;
}
dev = dcr->dev; /* may have changed in reserve_volume */
dev->clear_append(); /* remove append since this is PRE_LABEL */
return true;
bail_out:
volume_unused(dcr);
dev->clear_volhdr();
dev->clear_append(); /* remove append since this is PRE_LABEL */
return false;
}
