/****************************************************************************
Name: defaultKeyAction
Desc:
*****************************************************************************/
void F_DynamicList::defaultKeyAction(
FLMUINT uiKey)
{
switch( uiKey)
{
case FKB_UP:
cursorUp();
break;
case FKB_DOWN:
cursorDown();
break;
case FKB_PGUP:
pageUp();
break;
case FKB_PGDN:
pageDown();
break;
case FKB_HOME:
home();
break;
case FKB_END:
end();
break;
case 'd':
case 'D':
{
RCODE rc = NE_FLM_OK;
rc = this->dumpToFile();
break;
}
}
refresh();
}
void upISR(){
if(isr_mode == SET_MODE || isr_mode == VAR_MODE || isr_mode == APP_MODE)
cursorUp();
else if(EDIT_MODE)
incInput();
}
void twinkle::findLimbusContour(cv::Mat mat, Point* pupil)
{
Point cursorUp(*pupil);
Point cursorDown(cursorUp.x, cursorUp.y+1);
Point cursorLeft(cursorUp);
Point cursorRight(cursorUp.x+1, cursorUp.y);
std::vector<Point> limbusContourLR, limbusContourUD;
bool debug = true;
Mat debMatLR(mat.rows, mat.cols, CV_8U);
Mat debMatUD(mat.rows, mat.cols, CV_8U);
mat.copyTo(debMatLR);
mat.copyTo(debMatUD);
if(debug)
{
namedWindow("Limbus contour LR", CV_WINDOW_NORMAL);
namedWindow("Limbus contour UD", CV_WINDOW_NORMAL);
}
mat.at<uchar>(cursorUp) = 0;
std::cout<<"limbusContourLR.size() = "<<limbusContourLR.size()<<std::endl;
moveCursor(cursorUp, mat, &limbusContourLR, debug, debMatLR, UP_DIR);
std::cout<<"After moveUp limbusContourLR.size() = "<<limbusContourLR.size()<<std::endl;
moveCursor(cursorDown, mat, &limbusContourLR, debug, debMatLR, DOWN_DIR);
std::cout<<"After moveDown limbusContourLR.size() = "<<limbusContourLR.size()<<std::endl;
moveCursor(cursorLeft, mat, &limbusContourUD, debug, debMatUD, LEFT_DIR);
std::cout<<"After moveLeft limbusContourUD.size() = "<<limbusContourUD.size()<<std::endl;
moveCursor(cursorRight, mat, &limbusContourUD, debug, debMatUD, RIGHT_DIR);
std::cout<<"After moveRight limbusContourUD.size() = "<<limbusContourUD.size()<<std::endl;
}
void cursorLeft(){
if (cursorX > 0){
cursorX--;
}
else{
cursorX = width - 1;
cursorUp();
}
}
void leftISR(){
if(isr_mode == SET_MODE || isr_mode == VAR_MODE || isr_mode == APP_MODE)
cursorUp();
else if(isr_mode = EDIT_MODE){
if(input_cursor > 0)
input_cursor--;
}
}
void Region::addrandom() {
double x = ((double)rand())/RAND_MAX;
double y = ((double)rand())/RAND_MAX;
double depth = ((double)rand())/RAND_MAX;
depth /= 3.0; // fake input shouldn't be very deep
NosuchVector pos = NosuchVector(x,y);
int sidnum = 2001;
// std::string sid = sidString(sidnum,"");
Cursor* c = new Cursor(palette, sidnum, "random", this, pos, depth, 1.0f);
NosuchDebug("Addrandom creating new Cursor");
cursorDown(c);
cursorUp(c);
}
bool ClientConsole::onKeyPress (int32_t key, int16_t modifier)
{
switch (key) {
case SDLK_TAB:
if (modifier & KMOD_SHIFT) {
toggleConsole();
return true;
}
}
if (!_active)
return false;
switch (key) {
case SDLK_ESCAPE:
toggleConsole();
break;
case SDLK_RETURN:
executeCommandLine();
break;
case SDLK_BACKSPACE:
cursorDelete();
break;
case SDLK_DELETE:
cursorDelete(false);
break;
case SDLK_INSERT:
_overwrite ^= true;
break;
case SDLK_LEFT:
cursorLeft();
break;
case SDLK_RIGHT:
cursorRight();
break;
case SDLK_UP:
cursorUp();
break;
case SDLK_DOWN:
cursorDown();
break;
case SDLK_TAB:
autoComplete();
break;
default:
return false;
}
return true;
}
void Region::processCursor(SpaceCursor* c, int downdragup) {
if ( isButton() ) {
DEBUGPRINT(("Region::processCursor BUTTON!"));
switch ( downdragup ) {
case CURSOR_DOWN: buttonDown(); break;
case CURSOR_UP: buttonUp(); break;
}
} else {
DEBUGPRINT(("Region::processCursor SURFACE!"));
switch ( downdragup ) {
case CURSOR_DOWN: cursorDown(c); break;
case CURSOR_DRAG: cursorDrag(c); break;
case CURSOR_UP: cursorUp(c); break;
}
}
}
void Region::checkCursorUp(int millinow) {
if ( ! cursorlist_lock_write() ) {
NosuchDebug("Region::checkCursorUp, unable to lock cursorlist");
return;
}
for ( std::list<Cursor*>::iterator i = _cursors.begin(); i!=_cursors.end(); ) {
Cursor* c = *i;
NosuchAssert(c);
int dt = millinow - c->touched();
if (dt > 4) {
// NosuchDebug("checkCursorUp, dt>4 = %d",dt);
cursorUp(c);
i = _cursors.erase(i);
// XXX - should c be deleted?
delete c;
} else {
i++;
}
}
cursorlist_unlock();
}
//==============================================================================
bool CodeEditorComponent::keyPressed (const KeyPress& key)
{
const bool moveInWholeWordSteps = key.getModifiers().isCtrlDown() || key.getModifiers().isAltDown();
const bool shiftDown = key.getModifiers().isShiftDown();
if (key.isKeyCode (KeyPress::leftKey))
{
cursorLeft (moveInWholeWordSteps, shiftDown);
}
else if (key.isKeyCode (KeyPress::rightKey))
{
cursorRight (moveInWholeWordSteps, shiftDown);
}
else if (key.isKeyCode (KeyPress::upKey))
{
if (key.getModifiers().isCtrlDown() && ! shiftDown)
scrollDown();
#if JUCE_MAC
else if (key.getModifiers().isCommandDown())
goToStartOfDocument (shiftDown);
#endif
else
cursorUp (shiftDown);
}
else if (key.isKeyCode (KeyPress::downKey))
{
if (key.getModifiers().isCtrlDown() && ! shiftDown)
scrollUp();
#if JUCE_MAC
else if (key.getModifiers().isCommandDown())
goToEndOfDocument (shiftDown);
#endif
else
cursorDown (shiftDown);
}
else if (key.isKeyCode (KeyPress::pageDownKey))
{
pageDown (shiftDown);
}
else if (key.isKeyCode (KeyPress::pageUpKey))
{
pageUp (shiftDown);
}
else if (key.isKeyCode (KeyPress::homeKey))
{
if (moveInWholeWordSteps)
goToStartOfDocument (shiftDown);
else
goToStartOfLine (shiftDown);
}
else if (key.isKeyCode (KeyPress::endKey))
{
if (moveInWholeWordSteps)
goToEndOfDocument (shiftDown);
else
goToEndOfLine (shiftDown);
}
else if (key.isKeyCode (KeyPress::backspaceKey))
{
backspace (moveInWholeWordSteps);
}
else if (key.isKeyCode (KeyPress::deleteKey))
{
deleteForward (moveInWholeWordSteps);
}
else if (key == KeyPress (T('c'), ModifierKeys::commandModifier, 0))
{
copy();
}
else if (key == KeyPress (T('x'), ModifierKeys::commandModifier, 0))
{
copyThenCut();
}
else if (key == KeyPress (T('v'), ModifierKeys::commandModifier, 0))
{
paste();
}
else if (key == KeyPress (T('z'), ModifierKeys::commandModifier, 0))
{
undo();
}
else if (key == KeyPress (T('y'), ModifierKeys::commandModifier, 0)
|| key == KeyPress (T('z'), ModifierKeys::commandModifier | ModifierKeys::shiftModifier, 0))
{
redo();
}
else if (key == KeyPress (T('a'), ModifierKeys::commandModifier, 0))
{
selectAll();
}
else if (key == KeyPress::tabKey || key.getTextCharacter() == '\t')
{
insertTabAtCaret();
}
else if (key == KeyPress::returnKey)
{
newTransaction();
insertTextAtCaret (document.getNewLineCharacters());
}
else if (key.isKeyCode (KeyPress::escapeKey))
{
newTransaction();
}
else if (key.getTextCharacter() >= ' ')
{
insertTextAtCaret (String::charToString (key.getTextCharacter()));
}
else
{
return false;
}
return true;
}
void
H19::processCharacter(char ch)
{
// mask off the high bit just in case, the real H19 would not have it set.
ch &= 0x7f;
if (mode_m == Normal)
{
switch (ch)
{
case ascii::NUL:
case ascii::SOH:
case ascii::STX:
case ascii::ETX:
case ascii::EOT:
case ascii::ENQ:
case ascii::ACK:
case ascii::VT:
case ascii::FF:
case ascii::SO:
case ascii::SI:
case ascii::DLE:
case ascii::DC1:
case ascii::DC2:
case ascii::DC3:
case ascii::DC4:
case ascii::NAK:
case ascii::SYN:
case ascii::ETB:
case ascii::EM:
case ascii::SUB:
case ascii::FS:
case ascii::GS:
case ascii::RS:
case ascii::US:
case ascii::DEL:
// From manual, these characters are not processed by the terminal
break;
case ascii::BEL: // Rings the bell.
/// \todo - implement ringing bell.
consoleLog("<BEL>");
break;
case ascii::BS: // Backspace
consoleLog("<BS>");
processBS();
break;
case ascii::HT: // Horizontal Tab
consoleLog("<TAB>");
processTAB();
break;
case ascii::LF: // Line Feed
processLF();
if (autoCR_m)
{
processCR();
}
consoleLog("\n");
break;
case ascii::CR: // Carriage Return
processCR();
if (autoLF_m)
{
processLF();
}
break;
case ascii::CAN: // Cancel.
break;
case ascii::ESC: // Escape
mode_m = Escape;
consoleLog("<ESC>");
break;
default:
// if Printable character display it.
#if CONSOLE_LOG
fprintf(console_out, "%c", ch);
#endif
displayCharacter(ch);
break;
}
}
else if (mode_m == Escape)
{
// Assume we go back to Normal, so only the few that don't need to set the mode.
mode_m = Normal;
switch (ch)
{
case ascii::CAN: // CAN - Cancel
// return to Normal mode, already set.
break;
case ascii::ESC: // Escape
// From the ROM listing, stay in this mode.
mode_m = Escape;
break;
// Cursor Functions
case 'H': // Cursor Home
posX_m = posY_m = 0;
updated_m = true;
break;
case 'C': // Cursor Forward
cursorForward();
break;
case 'D': // Cursor Backward
processBS(); // same processing as cursor backward
break;
case 'B': // Cursor Down
cursorDown();
break;
case 'A': // Cursor Up
cursorUp();
break;
case 'I': // Reverse Index
reverseIndex();
break;
case 'n': // Cursor Position Report
cursorPositionReport();
break;
case 'j': // Save cursor position
saveCursorPosition();
break;
case 'k': // Restore cursor position
restoreCursorPosition();
break;
case 'Y': // Direct Cursor Addressing
mode_m = DCA_1;
break;
// Erase and Editing
case 'E': // Clear Display
clearDisplay();
break;
case 'b': // Erase Beginning of Display
eraseBOD();
break;
case 'J': // Erase to End of Page
eraseEOP();
break;
case 'l': // Erase entire Line
eraseEL();
break;
case 'o': // Erase Beginning Of Line
eraseBOL();
break;
case 'K': // Erase To End Of Line
eraseEOL();
break;
case 'L': // Insert Line
insertLine();
break;
case 'M': // Delete Line
deleteLine();
break;
case 'N': // Delete Character
deleteChar();
break;
case '@': // Enter Insert Character Mode
insertMode_m = true;
break;
case 'O': // Exit Insert Character Mode
insertMode_m = false;
break;
// Configuration
case 'z': // Reset To Power-Up Configuration
reset();
break;
case 'r': // Modify the Baud Rate
/// \todo - determine if we should support this.
debugss(ssH19, ERROR, "Error Unimplemented Modify Baud\n");
break;
case 'x': // Set Mode
mode_m = SetMode;
break;
case 'y': // Reset Mode
mode_m = ResetMode;
break;
case '<': // Enter ANSI Mode
/// \todo - implement ANSI mode.
// ROM - just sets the mode
debugss(ssH19, ERROR, "Error Entering ANSI mode - unsupported\n");
break;
// Modes of operation
case '[': // Enter Hold Screen Mode
holdScreen_m = true;
break;
case '\\': // Exit Hold Screen Mode
holdScreen_m = false;
break;
case 'p': // Enter Reverse Video Mode
reverseVideo_m = true;
break;
case 'q': // Exit Reverse Video Mode
reverseVideo_m = false;
break;
case 'F': // Enter Graphics Mode
graphicMode_m = true;
break;
case 'G': // Exit Graphics Mode
graphicMode_m = false;
break;
case 't': // Enter Keypad Shifted Mode
keypadShifted_m = true;
break;
case 'u': // Exit Keypad Shifted Mode
// ROM - just sets the mode
keypadShifted_m = false;
break;
case '=': // Enter Alternate Keypad Mode
// ROM - just sets the mode
keypadShifted_m = true;
break;
case '>': // Exit Alternate Keypad Mode
// ROM - just sets the mode
keypadShifted_m = false;
break;
// Additional Functions
case '}': // Keyboard Disable
/// \todo - determine whether to do this.
keyboardEnabled_m = false;
break;
case '{': // Keyboard Enable
keyboardEnabled_m = true;
break;
case 'v': // Wrap Around at End Of Line
wrapEOL_m = true;
break;
case 'w': // Discard At End Of Line
wrapEOL_m = false;
break;
case 'Z': // Identify as VT52 (Data: ESC / K)
debugss(ssH19, ERROR, "Identify request\n");
sendData(ascii::ESC);
sendData('/');
sendData('K');
break;
case ']': // Transmit 25th Line
transmitLine25();
break;
case '#': // Transmit Page
transmitPage();
break;
default:
debugss(ssH19, WARNING, "Unhandled ESC: %d\n", ch);
/// \todo - verify this is how the H19 ROM does it.
break;
}
}
else if (mode_m == SetMode)
{
mode_m = Normal;
switch (ch)
{
case '1': // Enable 25th line
// From the ROM, it erases line 25 on the enable, but here we erase on the disable.
line25_m = true;
break;
case '2': // No key click
keyClick_m = true;
break;
case '3': // Hold screen mode
holdScreen_m = true;
break;
case '4': // Block Cursor
cursorBlock_m = true;
updated_m = true;
break;
case '5': // Cursor Off
cursorOff_m = true;
updated_m = true;
break;
case '6': // Keypad Shifted
keypadShifted_m = true;
break;
case '7': // Alternate Keypad mode
altKeypadMode_m = true;
break;
case '8': // Auto LF
autoLF_m = true;
break;
case '9': // Auto CR
autoCR_m = true;
break;
default:
/// \todo Need to process ch as if none of this happened...
debugss(ssH19, WARNING, "Invalid set Mode: %c\n", ch);
break;
}
}
else if (mode_m == ResetMode)
{
mode_m = Normal;
switch (ch)
{
case '1': // Disable 25th line
eraseLine(rowsMain_c);
line25_m = false;
updated_m = true;
break;
case '2': // key click
keyClick_m = false;
break;
case '3': // Hold screen mode
holdScreen_m = false;
break;
case '4': // Block Cursor
cursorBlock_m = false;
updated_m = true;
break;
case '5': // Cursor On
cursorOff_m = false;
updated_m = true;
break;
case '6': // Keypad Unshifted
keypadShifted_m = false;
break;
case '7': // Exit Alternate Keypad mode
altKeypadMode_m = false;
break;
case '8': // No Auto LF
autoLF_m = false;
break;
case '9': // No Auto CR
autoCR_m = false;
break;
default:
/// \todo Need to process ch as if none of this happened...
debugss(ssH19, WARNING, "Invalid reset Mode: %c\n", ch);
break;
}
}
else if (mode_m == DCA_1)
{
// From actual H19, once the line is specified, the cursor
// immediately moves to that line, so no need to save the
// position and wait for the entire command.
/// \todo verify that this is the same on newer H19s.
if (ch == ascii::CAN)
{
// cancel
mode_m = Normal;
}
else
{
// \todo handle error conditions
int pos = ch - 31;
// verify valid Position
if (((pos > 0) && (pos < (signed) rows_c)) || ((pos == (signed) rows_c) && (line25_m)))
{
posY_m = pos - 1;
}
else
{
/// \todo check to see how a real h19 handles this.
debugss(ssH19, INFO, "DCA invalid Y: %d\n", pos);
}
mode_m = DCA_2;
}
}
else if (mode_m == DCA_2)
{
if (ch == ascii::CAN)
{
// cancel
mode_m = Normal;
}
else
{
int pos = ch - 31;
if ((pos > 0) && (pos < 81))
{
posX_m = pos - 1;
}
else
{
posX_m = (cols_c - 1);
}
updated_m = true;
mode_m = Normal;
}
}
}
void
Engine::CursorUp ()
{
cursorUp();
}