bool QgsMapToolLabel::dataDefinedRotation( QgsVectorLayer* vlayer, const QgsFeatureId &featureId, double& rotation, bool& rotationSuccess, bool ignoreXY ) const
{
rotationSuccess = false;
if ( !vlayer )
{
return false;
}
int rotationCol;
if ( !layerIsRotatable( vlayer, rotationCol ) )
{
return false;
}
QgsFeature f;
if ( !vlayer->getFeatures( QgsFeatureRequest().setFilterFid( featureId ).setFlags( QgsFeatureRequest::NoGeometry ) ).nextFeature( f ) )
{
return false;
}
//test, if data defined x- and y- values are not null. Otherwise, the position is determined by PAL and the rotation cannot be fixed
if ( !ignoreXY )
{
int xCol, yCol;
double x, y;
bool xSuccess, ySuccess;
if ( !dataDefinedPosition( vlayer, featureId, x, xSuccess, y, ySuccess, xCol, yCol ) || !xSuccess || !ySuccess )
{
return false;
}
}
rotation = f.attribute( rotationCol ).toDouble( &rotationSuccess );
return true;
}
bool QgsMapToolLabel::isPinned()
{
bool rc = false;
if ( ! mCurrentLabelPos.isDiagram )
{
rc = mCurrentLabelPos.isPinned;
}
else
{
// for diagrams, the isPinned attribute is not set. So we check directly if
// there's data defined.
int xCol, yCol;
double x, y;
bool xSuccess, ySuccess;
if ( dataDefinedPosition( currentLayer(), mCurrentLabelPos.featureId, x,
xSuccess, y, ySuccess, xCol, yCol ) && xSuccess && ySuccess )
rc = true;
}
return rc;
}
bool QgsMapToolLabel::dataDefinedRotation( QgsVectorLayer* vlayer, int featureId, double& rotation, bool& rotationSuccess, bool ignoreXY )
{
rotationSuccess = false;
if ( !vlayer )
{
return false;
}
int rotationCol;
if ( !layerIsRotatable( vlayer, rotationCol ) )
{
return false;
}
QgsFeature f;
if ( !vlayer->featureAtId( featureId, f, false, true ) )
{
return false;
}
QgsAttributeMap attributes = f.attributeMap();
//test, if data defined x- and y- values are not null. Otherwise, the position is determined by PAL and the rotation cannot be fixed
if ( !ignoreXY )
{
int xCol, yCol;
double x, y;
bool xSuccess, ySuccess;
if ( !dataDefinedPosition( vlayer, featureId, x, xSuccess, y, ySuccess, xCol, yCol ) || !xSuccess || !ySuccess )
{
return false;
}
}
rotation = attributes[rotationCol].toDouble( &rotationSuccess );
return true;
}
void QgsMapToolMoveLabel::canvasReleaseEvent( QgsMapMouseEvent* e )
{
if ( !mLabelRubberBand )
{
return;
}
deleteRubberBands();
QgsMapLayer* layer = QgsMapLayerRegistry::instance()->mapLayer( mCurrentLabelPos.layerID );
if ( !layer )
{
return;
}
QgsVectorLayer* vlayer = dynamic_cast<QgsVectorLayer*>( layer );
if ( !vlayer )
{
return;
}
if ( !vlayer->isEditable() )
{
return;
}
QgsPoint releaseCoords = toMapCoordinates( e->pos() );
double xdiff = releaseCoords.x() - mStartPointMapCoords.x();
double ydiff = releaseCoords.y() - mStartPointMapCoords.y();
int xCol, yCol;
double xPosOrig, yPosOrig;
bool xSuccess, ySuccess;
if ( !dataDefinedPosition( vlayer, mCurrentLabelPos.featureId, xPosOrig, xSuccess, yPosOrig, ySuccess, xCol, yCol ) )
{
return;
}
double xPosNew, yPosNew;
if ( !xSuccess || !ySuccess )
{
xPosNew = releaseCoords.x() - mClickOffsetX;
yPosNew = releaseCoords.y() - mClickOffsetY;
}
else
{
//transform to map crs first, because xdiff,ydiff are in map coordinates
const QgsMapSettings& ms = mCanvas->mapSettings();
if ( ms.hasCrsTransformEnabled() )
{
QgsPoint transformedPoint = ms.layerToMapCoordinates( vlayer, QgsPoint( xPosOrig, yPosOrig ) );
xPosOrig = transformedPoint.x();
yPosOrig = transformedPoint.y();
}
xPosNew = xPosOrig + xdiff;
yPosNew = yPosOrig + ydiff;
}
//transform back to layer crs
if ( mCanvas )
{
const QgsMapSettings& s = mCanvas->mapSettings();
if ( s.hasCrsTransformEnabled() )
{
QgsPoint transformedPoint = s.mapToLayerCoordinates( vlayer, QgsPoint( xPosNew, yPosNew ) );
xPosNew = transformedPoint.x();
yPosNew = transformedPoint.y();
}
}
vlayer->beginEditCommand( tr( "Moved label" ) + QString( " '%1'" ).arg( currentLabelText( 24 ) ) );
vlayer->changeAttributeValue( mCurrentLabelPos.featureId, xCol, xPosNew );
vlayer->changeAttributeValue( mCurrentLabelPos.featureId, yCol, yPosNew );
// set rotation to that of label, if data-defined and no rotation set yet
// honor whether to preserve preexisting data on pin
// must come after setting x and y positions
int rCol;
if ( !mCurrentLabelPos.isDiagram
&& !mCurrentLabelPos.isPinned
&& !preserveRotation()
&& layerIsRotatable( vlayer, rCol ) )
{
double defRot;
bool rSuccess;
if ( dataDefinedRotation( vlayer, mCurrentLabelPos.featureId, defRot, rSuccess ) )
{
double labelRot = mCurrentLabelPos.rotation * 180 / M_PI;
vlayer->changeAttributeValue( mCurrentLabelPos.featureId, rCol, labelRot );
}
}
vlayer->endEditCommand();
if ( mCanvas )
mCanvas->refresh();
}
bool QgsMapToolPinLabels::pinUnpinLabel( QgsVectorLayer* vlayer,
const QgsLabelPosition& labelpos,
bool pin )
{
// skip diagrams
if ( labelpos.isDiagram )
{
QgsDebugMsg( QString( "Label is diagram, skipping" ) );
return false;
}
// verify attribute table has x, y fields mapped
int xCol, yCol;
double xPosOrig, yPosOrig;
bool xSuccess, ySuccess;
if ( !dataDefinedPosition( vlayer, mCurrentLabelPos.featureId, xPosOrig, xSuccess, yPosOrig, ySuccess, xCol, yCol ) )
{
QgsDebugMsg( QString( "Label X or Y column not mapped, skipping" ) );
return false;
}
// rotation field is optional, but will be used if available, unless data exists
int rCol;
bool rSuccess = false;
double defRot;
bool hasRCol = ( layerIsRotatable( vlayer, rCol )
&& dataDefinedRotation( vlayer, mCurrentLabelPos.featureId, defRot, rSuccess, true ) );
// get whether to preserve predefined rotation data during label pin/unpin operations
bool preserveRot = preserveRotation();
// edit attribute table
int fid = labelpos.featureId;
bool writeFailed = false;
QString labelText = currentLabelText( 24 );
if ( pin )
{
// QgsPoint labelpoint = labelpos.cornerPoints.at( 0 );
QgsPoint referencePoint;
if ( !rotationPoint( referencePoint, !preserveRot, false ) )
{
referencePoint.setX( mCurrentLabelPos.labelRect.xMinimum() );
referencePoint.setY( mCurrentLabelPos.labelRect.yMinimum() );
}
double labelX = referencePoint.x();
double labelY = referencePoint.y();
double labelR = labelpos.rotation * 180 / M_PI;
// transform back to layer crs, if on-fly on
if ( mCanvas->mapSettings().hasCrsTransformEnabled() )
{
QgsPoint transformedPoint = mCanvas->mapSettings().mapToLayerCoordinates( vlayer, referencePoint );
labelX = transformedPoint.x();
labelY = transformedPoint.y();
}
vlayer->beginEditCommand( tr( "Pinned label" ) + QString( " '%1'" ).arg( labelText ) );
writeFailed = !vlayer->changeAttributeValue( fid, xCol, labelX );
if ( !vlayer->changeAttributeValue( fid, yCol, labelY ) )
writeFailed = true;
if ( hasRCol && !preserveRot )
{
if ( !vlayer->changeAttributeValue( fid, rCol, labelR ) )
writeFailed = true;
}
vlayer->endEditCommand();
}
else
{
vlayer->beginEditCommand( tr( "Unpinned label" ) + QString( " '%1'" ).arg( labelText ) );
writeFailed = !vlayer->changeAttributeValue( fid, xCol, QVariant( QString::null ) );
if ( !vlayer->changeAttributeValue( fid, yCol, QVariant( QString::null ) ) )
writeFailed = true;
if ( hasRCol && !preserveRot )
{
if ( !vlayer->changeAttributeValue( fid, rCol, QVariant( QString::null ) ) )
writeFailed = true;
}
vlayer->endEditCommand();
}
if ( writeFailed )
{
QgsDebugMsg( QString( "Write to attribute table failed" ) );
#if 0
QgsDebugMsg( QString( "Undoing and removing failed command from layer's undo stack" ) );
int lastCmdIndx = vlayer->undoStack()->count();
const QgsUndoCommand* lastCmd = qobject_cast<const QgsUndoCommand *>( vlayer->undoStack()->command( lastCmdIndx ) );
if ( lastCmd )
{
vlayer->undoEditCommand( lastCmd );
delete vlayer->undoStack()->command( lastCmdIndx );
}
#endif
return false;
}
return true;
}
