コード例 #1
0
int
ether_encap_print(u_short ethertype, const u_char *p,
    u_int length, u_int caplen)
{
	extracted_ethertype = ethertype;

	switch (ethertype) {

	case ETHERTYPE_IP:
		ip_print(p, length);
		return (1);

	case ETHERTYPE_ARP:
	case ETHERTYPE_REVARP:
		arp_print(p, length, caplen);
		return (1);

	case ETHERTYPE_DN:
		decnet_print(p, length, caplen);
		return (1);

	case ETHERTYPE_ATALK:
		if (vflag)
			fputs("et1 ", stdout);
		atalk_print(p, length);
		return (1);

	case ETHERTYPE_AARP:
		aarp_print(p, length);
		return (1);

	case ETHERTYPE_LAT:
	case ETHERTYPE_SCA:
	case ETHERTYPE_MOPRC:
	case ETHERTYPE_MOPDL:
		/* default_print for now */
	default:
		return (0);
	}
}
コード例 #2
0
ファイル: print-atm.c プロジェクト: SylvestreG/bitrig
/*
 * This is the top level routine of the printer.  'p' is the points
 * to the LLC/SNAP header of the packet, 'tvp' is the timestamp,
 * 'length' is the length of the packet off the wire, and 'caplen'
 * is the number of bytes actually captured.
 */
void
atm_if_print(u_char *user, const struct pcap_pkthdr *h, const u_char *p)
{
	u_int caplen = h->caplen;
	u_int length = h->len;
	u_short ethertype;

	ts_print(&h->ts);

	if (caplen < 8) {
		printf("[|atm]");
		goto out;
	}
	if (p[0] != 0xaa || p[1] != 0xaa || p[2] != 0x03) {
		/*XXX assume 802.6 MAC header from fore driver */
		if (eflag)
			printf("%04x%04x %04x%04x ",
			       p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3],
			       p[4] << 24 | p[5] << 16 | p[6] << 8 | p[7],
			       p[8] << 24 | p[9] << 16 | p[10] << 8 | p[11],
			       p[12] << 24 | p[13] << 16 | p[14] << 8 | p[15]);
		p += 20;
		length -= 20;
		caplen -= 20;
	}
	ethertype = p[6] << 8 | p[7];
	if (eflag)
		printf("%02x %02x %02x %02x-%02x-%02x %04x: ",
		       p[0], p[1], p[2], /* dsap/ssap/ctrl */
		       p[3], p[4], p[5], /* manufacturer's code */
		       ethertype);

	/*
	 * Some printers want to get back at the ethernet addresses,
	 * and/or check that they're not walking off the end of the packet.
	 * Rather than pass them all the way down, we set these globals.
	 */
	packetp = p;
	snapend = p + caplen;

	length -= 8;
	caplen -= 8;
	p += 8;

	switch (ethertype) {

	case ETHERTYPE_IP:
		ip_print(p, length);
		break;

#ifdef INET6
	case ETHERTYPE_IPV6:
		ip6_print(p, length);
		break;
#endif /*INET6*/

		/*XXX this probably isn't right */
	case ETHERTYPE_ARP:
	case ETHERTYPE_REVARP:
		arp_print(p, length, caplen);
		break;
#ifdef notyet
	case ETHERTYPE_DN:
		decnet_print(p, length, caplen);
		break;

	case ETHERTYPE_ATALK:
		if (vflag)
			fputs("et1 ", stdout);
		atalk_print(p, length);
		break;

	case ETHERTYPE_AARP:
		aarp_print(p, length);
		break;

	case ETHERTYPE_LAT:
	case ETHERTYPE_MOPRC:
	case ETHERTYPE_MOPDL:
		/* default_print for now */
#endif
	default:
		/* ether_type not known, print raw packet */
		if (!eflag)
			printf("%02x %02x %02x %02x-%02x-%02x %04x: ",
			       p[0], p[1], p[2], /* dsap/ssap/ctrl */
			       p[3], p[4], p[5], /* manufacturer's code */
			       ethertype);
		if (!xflag && !qflag)
			default_print(p, caplen);
	}
	if (xflag)
		default_print(p, caplen);
 out:
	putchar('\n');
}
コード例 #3
0
ファイル: print-ether.c プロジェクト: 2asoft/freebsd
int
ethertype_print(netdissect_options *ndo,
                u_short ether_type, const u_char *p,
                u_int length, u_int caplen)
{
	switch (ether_type) {

	case ETHERTYPE_IP:
	        ip_print(ndo, p, length);
		return (1);

	case ETHERTYPE_IPV6:
		ip6_print(ndo, p, length);
		return (1);

	case ETHERTYPE_ARP:
	case ETHERTYPE_REVARP:
  	        arp_print(ndo, p, length, caplen);
		return (1);

	case ETHERTYPE_DN:
		decnet_print(ndo, p, length, caplen);
		return (1);

	case ETHERTYPE_ATALK:
		if (ndo->ndo_vflag)
			ND_PRINT((ndo, "et1 "));
		atalk_print(ndo, p, length);
		return (1);

	case ETHERTYPE_AARP:
		aarp_print(ndo, p, length);
		return (1);

	case ETHERTYPE_IPX:
		ND_PRINT((ndo, "(NOV-ETHII) "));
		ipx_print(ndo, p, length);
		return (1);

	case ETHERTYPE_ISO:
		isoclns_print(ndo, p + 1, length - 1, length - 1);
		return(1);

	case ETHERTYPE_PPPOED:
	case ETHERTYPE_PPPOES:
	case ETHERTYPE_PPPOED2:
	case ETHERTYPE_PPPOES2:
		pppoe_print(ndo, p, length);
		return (1);

	case ETHERTYPE_EAPOL:
	        eap_print(ndo, p, length);
		return (1);

	case ETHERTYPE_RRCP:
	        rrcp_print(ndo, p - 14 , length + 14);
		return (1);

	case ETHERTYPE_PPP:
		if (length) {
			ND_PRINT((ndo, ": "));
			ppp_print(ndo, p, length);
		}
		return (1);

	case ETHERTYPE_MPCP:
	        mpcp_print(ndo, p, length);
		return (1);

	case ETHERTYPE_SLOW:
	        slow_print(ndo, p, length);
		return (1);

	case ETHERTYPE_CFM:
	case ETHERTYPE_CFM_OLD:
		cfm_print(ndo, p, length);
		return (1);

	case ETHERTYPE_LLDP:
		lldp_print(ndo, p, length);
		return (1);

        case ETHERTYPE_LOOPBACK:
		loopback_print(ndo, p, length);
                return (1);

	case ETHERTYPE_MPLS:
	case ETHERTYPE_MPLS_MULTI:
		mpls_print(ndo, p, length);
		return (1);

	case ETHERTYPE_TIPC:
		tipc_print(ndo, p, length, caplen);
		return (1);

	case ETHERTYPE_MS_NLB_HB:
		msnlb_print(ndo, p);
		return (1);

        case ETHERTYPE_GEONET_OLD:
        case ETHERTYPE_GEONET:
                geonet_print(ndo, p-14, p, length);
                return (1);

        case ETHERTYPE_CALM_FAST:
                calm_fast_print(ndo, p-14, p, length);
                return (1);

	case ETHERTYPE_AOE:
		aoe_print(ndo, p, length);
		return (1);

	case ETHERTYPE_LAT:
	case ETHERTYPE_SCA:
	case ETHERTYPE_MOPRC:
	case ETHERTYPE_MOPDL:
	case ETHERTYPE_IEEE1905_1:
		/* default_print for now */
	default:
		return (0);
	}
}