/**
* @brief Echo the data for IPI testing
*
* This function copies the request buffer to response buffer to show the
* IPI functionality
*
* @param req_buf: Virtual address of the request buffer
* @param req_buf_len: Request buffer length
* @param res_buf: Virtual address of the response buffer
* @param res_buf_len: Response buffer length
* @param meta_data: Virtual address of the meta data of the encoded data
* @param ret_res_buf_len: Return length of the response buffer
*
* @return SMC return codes:
* SMC_SUCCESS: API processed successfully. \n
* SMC_*: An implementation-defined error code for any other error.
*/
int process_otz_echo_ipi_send_cmd(void *req_buf, u32 req_buf_len,
void *res_buf, u32 res_buf_len,
struct otzc_encode_meta *meta_data,
u32 *ret_res_buf_len)
{
echo_data_t echo_data;
char *out_buf;
int offset = 0, pos = 0, mapped = 0, type, out_len;
if(req_buf_len > 0) {
while (offset <= req_buf_len) {
if(decode_data(req_buf, meta_data,
&type, &offset, &pos, &mapped, (void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
else {
if(type != OTZ_MEM_REF)
return SMC_EINVAL_ARG;
sw_memcpy(echo_data.data, out_buf, out_len);
echo_data.len = out_len;
}
break;
}
}
offset = 0, pos = OTZ_MAX_REQ_PARAMS;
if (res_buf_len > 0) {
while (offset <= res_buf_len) {
if(decode_data(res_buf, meta_data,
&type, &offset, &pos, &mapped, (void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
else {
if(type != OTZ_MEM_REF)
return SMC_EINVAL_ARG;
}
sw_memcpy(out_buf, echo_data.data, echo_data.len);
if(update_response_len(meta_data, pos, echo_data.len))
return SMC_EINVAL_ARG;
break;
}
*ret_res_buf_len = echo_data.len;
}
/*
sw_printf("SW: echo send cmd %s and len 0x%x strlen 0x%x\n",
echo_data.data, echo_data.len, sw_strlen(echo_data.data));
*/
return 0;
}
/**
* Verify that a buffer contains a valid packet.
* \param[in] h The packet handler instance data pointer.
* \param[in] p A pointer to the packet buffer.
* \param[in] received_len The length of data received.
* \return < 0 Failure
* \return > 0 Number of bytes consumed.
*/
int32_t PHVerifyPacket(PHInstHandle h, PHPacketHandle p, uint16_t received_len)
{
// Verify the packet length.
// Note: The last two bytes should be the RSSI and AFC.
uint16_t len = PHPacketSizeECC(p);
if (received_len < (len + 2))
{
DEBUG_PRINTF(1, "Packet length error %d %d\n\r", received_len, len + 2);
return -1;
}
// Attempt to correct any errors in the packet.
decode_data((unsigned char*)p, len);
// Check that there were no unfixed errors.
bool rx_error = check_syndrome() != 0;
if(rx_error)
{
DEBUG_PRINTF(1, "Error in packet\n\r");
return -2;
}
return len + 2;
}
// Set senderid, packetcounter and CRC into the partly filled packet, encrypt it using the given AES key number and send it.
void send_packet(uint8_t aes_key_nr, uint8_t packet_len)
{
pkg_header_set_senderid(device_id);
inc_packetcounter();
pkg_header_set_packetcounter(packetcounter);
// set CRC32
pkg_header_set_crc32(crc32(bufx + 4, packet_len - 4));
// load AES key (0 is first AES key)
if (aes_key_nr >= aes_key_count)
{
aes_key_nr = aes_key_count - 1;
}
e2p_basestation_get_aeskey(aes_key_nr, aes_key);
// show info
decode_data(packet_len);
// encrypt and send
__PACKETSIZEBYTES = packet_len;
rfm12_send_bufx();
}
int show_status(ADDRESS_BOOK config)
{
FILE *fp;
struct address_data data;
int record, record_active, record_hide;
char buf[1024];
fp = fopen(config.filename, "r");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", config.filename);
return -1;
}
printf("=====================================\n");
for(record = 0, record_active = 0, record_hide = 0; ;) {
if(fgets(buf, sizeof(buf), fp) == 0) break;
record ++;
data = decode_data(buf);
if(data.status == (0x01 << ACTIVE)) {
record_active++;
} else if(data.status == (0x01 << HIDE)) {
record_hide++;
}
}
printf("Number of record: %d\n", record);
printf("Number of active record: %d\n", record_active);
printf("=====================================\n");
fclose(fp);
return 0;
}
int load_file(ADDRESS_BOOK *config)
{
FILE *fp;
char buf[1024];
char *filename = config->filename;
int width_name, width_address;
struct address_data data;
fp = fopen(filename, "r");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", filename);
return -1;
}
while(1) {
if(fgets(buf, sizeof(buf), fp) == 0) break;
config->last_id = atoi(buf);
}
fseek(fp, 0, SEEK_SET);
for(width_name = 0, width_address = 0; ;) {
if(fgets(buf, sizeof(buf), fp) == 0) break;
data = decode_data(buf);
if(width_name < strlen(data.name))
width_name = strlen(data.name);
if(width_address < strlen(data.address))
width_address = strlen(data.address);
}
config->width_name = width_name;
config->width_address = width_address;
fclose(fp);
return 0;
}
void decode_file(FILE *fpi, FILE *fpo) {
size_t n, x;
unsigned long len;
unsigned char cont[CONTSIZE], data[DATASIZE];
struct stash_hdr shdr = {0};
// Skip restricted area
(void)fseek(fpi, STARTBYTE, SEEK_SET);
// Get header
n = fread(data, 1, sizeof(struct stash_hdr)<<3, fpi);
decode_data((unsigned char *)&shdr, sizeof(struct stash_hdr), data, (int)n, 0);
// Decode data
len = shdr.len;
while(len > 0) {
if(len >= DATASIZE)
x = DATASIZE;
else
x = len;
n = fread(cont, 1, x<<3, fpi);
decode_data(data, (int)n>>3, cont, (int)n, 1);
fwrite(data, 1, (int)x, fpo);
len -= (unsigned long)x;
}
return;
}
void ICACHE_FLASH_ATTR
pando_subdevice_recv(uint8_t * buffer, uint16_t length)
{
if(NULL == buffer)
{
return;
}
PRINTF("subdevive receive a package: \n");
show_package(buffer, length);
struct sub_device_buffer *device_buffer = (struct sub_device_buffer *)pd_malloc(sizeof(struct sub_device_buffer));
device_buffer->buffer_length = length;
device_buffer->buffer = (uint8 *)pd_malloc(length);
pd_memcpy(device_buffer->buffer, buffer, length);
uint16 payload_type = get_sub_device_payloadtype(device_buffer);
switch (payload_type) {
case PAYLOAD_TYPE_DATA:
decode_data(device_buffer);
break;
case PAYLOAD_TYPE_COMMAND:
decode_command(device_buffer);
break;
default:
PRINTF("unsuported paload type : %d", payload_type);
break;
}
delete_device_package(device_buffer);
}
void Simulation::decodedReceiveData(int length, const uint8 *data, uint32 /*src*/)
{
DBG("decodedReceiveData(%i, xxxx)\n", length);
if (m_shutdown) {
return;
}
decode_data(data, length, 0, 0);
}
int
main (int argc, char *argv[])
{
int erasures[16];
int nerasures = 0;
/* Initialization the ECC library */
initialize_ecc ();
/* ************** */
/* Encode data into codeword, adding NPAR parity bytes */
encode_data(msg, sizeof(msg), codeword);
printf("Encoded data is: \"%s\"\n", codeword);
printf("Encoded data length: \"%d\"\n", sizeof(codeword));
printf("msg length: \"%d\"\n", sizeof(msg));
int i;
for (i = 0; (i < sizeof(msg)); i++) {
printf("%02x", msg[i]);
}
printf("\n");
for (i = 0; (i < sizeof(codeword)); i++) {
printf("%02x", codeword[i]);
}
printf("\n");
#define ML (sizeof (msg) + NPAR)
/* We need to indicate the position of the erasures. Eraseure
positions are indexed (1 based) from the end of the message... */
erasures[nerasures++] = ML-17;
erasures[nerasures++] = ML-19;
/* Now decode -- encoded codeword size must be passed */
decode_data(codeword, ML);
/* check if syndrome is all zeros */
if (check_syndrome () != 0) {
correct_errors_erasures (codeword,
ML,
nerasures,
erasures);
printf("Corrected codeword: \"%s\"\n", codeword);
}
exit(0);
}
void DecoderStack::decode_proc()
{
optional<int64_t> sample_count;
srd_session *session;
srd_decoder_inst *prev_di = NULL;
assert(_snapshot);
// Create the session
srd_session_new(&session);
assert(session);
// Create the decoders
const unsigned int unit_size = _snapshot->unit_size();
for (const shared_ptr<decode::Decoder> &dec : _stack)
{
srd_decoder_inst *const di = dec->create_decoder_inst(session, unit_size);
if (!di)
{
_error_message = tr("Failed to create decoder instance");
srd_session_destroy(session);
return;
}
if (prev_di)
srd_inst_stack (session, prev_di, di);
prev_di = di;
}
// Get the intial sample count
{
unique_lock<mutex> input_lock(_input_mutex);
sample_count = _sample_count = _snapshot->get_sample_count();
}
// Start the session
srd_session_metadata_set(session, SRD_CONF_SAMPLERATE,
g_variant_new_uint64((uint64_t)_samplerate));
srd_pd_output_callback_add(session, SRD_OUTPUT_ANN,
DecoderStack::annotation_callback, this);
srd_session_start(session);
do {
decode_data(*sample_count, unit_size, session);
} while(_error_message.isEmpty() && (sample_count = wait_for_data()));
// Destroy the session
srd_session_destroy(session);
}
int main(int argc, char *argv[]) {
mqd_t q_handler_encoded_data, q_handler_decoded_data;
mode_t mode_read_only = O_RDONLY;
mode_t mode_write_only = O_WRONLY;
/* Open message queues */
open_message_queue(MQ_ENCODED_DATA, mode_read_only, &q_handler_encoded_data);
open_message_queue(MQ_DECODED_DATA, mode_write_only, &q_handler_decoded_data);
/* Task management */
decode_data(q_handler_encoded_data, q_handler_decoded_data);
return EXIT_SUCCESS;
}
int AndCodec_EasyDecoderAdd(int dec, unsigned char* decdata, int decdata_size,
unsigned char* opaque, int opaque_len)
{
and_log_writeline_simple(0, LOG_DEBUG, "AndCodec_EasyDecoderAdd()");
if(!dec) {
and_log_writeline_simple(0, LOG_ERROR, "decoder handle is null");
return -1;
}
if(!decdata) {
and_log_writeline_simple(0, LOG_ERROR, "decode data is null");
return -1;
}
easy_decoder_handle* handle = (easy_decoder_handle *)dec;
return decode_data(handle, decdata, decdata_size, opaque, opaque_len);
}
void continuous_test(double ebn0) {
uint8_t data[256] = {0};
uint8_t encoded[650] = {0};
uint8_t bits[5200] = {0};
uint8_t dec_data[256] = {0};
int8_t error[2] = {0};
FILE *fp;
uint16_t i;
// Es/No in dB - Energy per symbol (symbol, like channel bit)
double esn0 = ebn0 + 10*log10(1. / 2.);
// Compute noise voltage. The 0.5 factor accounts for BPSK seeing
// only half the noise power, and the sqrt() converts power to
// voltage.
double gain = 1./sqrt(0.5/pow(10.,esn0/10.));
gettimeofday(&start, NULL);
while (run) {
generate_random_data(&data);
#if (DEBUG >= 1)
fp = fopen("data", "wb");
fwrite(data, 256, 1, fp);
fclose(fp);
#endif
encode_data(&data, &encoded);
// AWGN channel simulation
for (i=0; i<5200; ++i) {
bits[i] = addnoise(encoded[i>>3] & (1 << (7 - (i & 7))), gain, 32.0);
}
decode_data(&bits, &dec_data, &error);
#if (DEBUG >= 1)
fp = fopen("dec_data", "wb");
fwrite(dec_data, 256, 1, fp);
fclose(fp);
#endif
stat_refresh(&error, is_equal(&data, &dec_data));
}
}
TEST_F(EncodeDecode, Recover) {
unsigned char p[10] = {'a', 'b', 'c', 'd', 'e', 'f'};
encode_data(p, 6, p);
unsigned char p2[10];
for (int i = 0; i < 10; i++)
p2[i] = p[i];
p2[4] = 30;
// verify it flags the error
decode_data(p2, 6 + RS_ECC_NPARITY);
EXPECT_EQ(1, check_syndrome());
// verify it is corrected
EXPECT_EQ(1, correct_errors_erasures(p2, 10, 0, 0));
for (int i = 0; i < 6; i++)
EXPECT_EQ(p[i], p2[i]);
};
void send_packet(uint8_t aes_key_nr, uint8_t data_len)
{
// set device ID (base station has ID 0 by definition)
bufx[0] = 0;
// update packet counter
packetcounter++;
if (packetcounter % PACKET_COUNTER_WRITE_CYCLE == 0)
{
eeprom_write_dword((uint32_t*)0, packetcounter);
}
setBuf32(1, packetcounter);
// set CRC32
uint32_t crc = crc32(bufx, data_len + 6);
setBuf32(data_len + 6, crc);
// load AES key (0 is first AES key)
if (aes_key_nr >= AES_KEY_EEPROM_COUNT)
{
aes_key_nr = AES_KEY_EEPROM_COUNT - 1;
}
eeprom_read_block (aes_key, (uint8_t *)(EEPROM_POS_AES_KEY + aes_key_nr * 32), 32);
// show info
decode_data(data_len + 6);
UART_PUTF(" AES key: %u\r\n", aes_key_nr);
UART_PUTF(" CRC32: %02lx\r\n", crc);
UART_PUTS(" Unencrypted: ");
printbytearray(bufx, data_len + 10);
// encrypt and send
uint8_t aes_byte_count = rfm12_sendbuf(data_len + 10);
UART_PUTS("Send encrypted: ");
printbytearray(bufx, aes_byte_count);
UART_PUTS("\r\n");
}
int show_data(ADDRESS_BOOK config)
{
FILE *fp;
struct address_data data;
char buf[1024];
char format_str[1024];
char *filename = config.filename;
int i;
int str_count;
fp = fopen(filename, "r");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", filename);
return -1;
}
sprintf(format_str, "| %%%ds | %%%ds | %%11s |\n", config.width_name, config.width_address);
str_count = sprintf(buf, format_str, "Name", "Address", "Phone") - 1; // ignore new line charactor
for(i = str_count; i > 0; i--)
printf("=");
printf("\n");
printf("%s", buf);
for(i = str_count; i > 0; i--)
printf("=");
printf("\n");
sprintf(format_str, "| %%%ds | %%%ds | ", config.width_name, config.width_address);
while(1) {
if(fgets(buf, sizeof(buf), fp) == 0) break;
data = decode_data(buf);
if(data.no == 0) continue;
if(data.status == (0x01 << HIDE)) continue;
printf(format_str, data.name, data.address);
for(i = 0; data.phone[i] != END_OF_PHONE_NUMBER; i++) {
printf("%d", data.phone[i]);
}
printf(" |\n");
}
for(i = str_count; i > 0; i--)
printf("=");
printf("\n");
fclose(fp);
return 0;
}
Buffer * PCMDecoder::decode(std::ifstream &in) const {
RAII_PCMDecoderData decode_data(in);
Buffer *buffer = nullptr;
try {
RIFFHeaderChunk header_chunk;
in.readsome((char *)&header_chunk, sizeof(RIFFHeaderChunk));
if (strncmp(header_chunk.id, "RIFF", 4) != 0
&& strncpy(header_chunk.format, "WAVE", 4) != 0) {
Error::raise(Error::Status::PCMError, "Bad file format.");
}
debug_riff_header_chunk(header_chunk);
WaveFormatChunk format_chunk;
in.readsome((char *)&format_chunk, sizeof(WaveFormatChunk));
if (strncmp(format_chunk.id, "fmt ", 4) != 0) {
Error::raise(Error::Status::PCMError, "Bad file format.");
}
debug_wave_format_chunk(format_chunk);
WaveDataChunk data_chunk;
in.readsome((char *)&data_chunk, sizeof(WaveDataChunk));
if (strncmp(data_chunk.id, "data", 4) != 0) {
Error::raise(Error::Status::PCMError, "Bad file format.");
}
debug_wave_data_chunk(data_chunk);
Format format(format_chunk.channelCount, format_chunk.sampleRate, format_chunk.bitPerSample);
decode_data.samples = (char *) malloc(data_chunk.size);
in.read(decode_data.samples, data_chunk.size);
buffer = new Buffer(format, data_chunk.size, decode_data.samples);
decode_data.samples = nullptr;
} catch (std::ifstream::failure ioerr) {
Error::raise(Error::Status::IOError, ioerr.what());
}
return buffer;
}
bool ArchiveDataClient::decode_channel(xmlrpc_value *channel,
size_t n,
value_callback callback,
void *callback_arg)
{
char *name;
xmlrpc_value *meta, *data;
xmlrpc_int32 type, count;
xmlrpc_parse_value(&env, channel, "{s:s,s:V,s:i,s:i,s:A,*}",
"name", &name,
"meta", &meta,
"type", &type,
"count", &count,
"values", &data);
if (log_fault())
return false;
CtrlInfo ctrlinfo;
if (!decode_meta(meta, ctrlinfo))
return false;
return decode_data(name, type, count, data, ctrlinfo,
n, callback, callback_arg);
}
uint8_t NUNCHUCK::retreive_data(){
Wire.requestFrom(NUNADDRESS, 6);
uint8_t index = 0;
while(Wire.available()){
nunDataArr[index] = decode_data(Wire.read());
index++;
}
request_data();
if(nunDataArr[5] != NULL){
return 1;
} else {
return 0;
}
}
int decode_trau_frame(struct decoded_trau_frame *fr, const uint8_t *trau_bits)
{
uint8_t cbits5 = get_bits(trau_bits, 17, 5);
switch (cbits5) {
case TRAU_FT_FR_UP:
case TRAU_FT_FR_DOWN:
case TRAU_FT_IDLE_UP:
case TRAU_FT_IDLE_DOWN:
case TRAU_FT_EFR:
decode_fr(fr, trau_bits);
break;
case TRAU_FT_AMR:
decode_amr(fr, trau_bits);
break;
case TRAU_FT_DATA_UP:
case TRAU_FT_DATA_DOWN:
decode_data(fr, trau_bits);
break;
case TRAU_FT_OM_UP:
case TRAU_FT_OM_DOWN:
case TRAU_FT_D145_SYNC:
case TRAU_FT_EDATA:
LOGP(DLMUX, LOGL_NOTICE, "can't decode unimplemented TRAU "
"Frame Type 0x%02x\n", cbits5);
return -1;
break;
default:
LOGP(DLMUX, LOGL_NOTICE, "can't decode unknown TRAU "
"Frame Type 0x%02x\n", cbits5);
return -1;
break;
}
return 0;
}
//concatenated decoding
void inner_decoding(decoded_blocks *db,unsigned char * c_in_codeword, unsigned long * indices){
int p;
//for(p=0;p<v;p++) {
// printf("random index #%d: %lu\n",p,indices[p]);
//}
unsigned char c_in_message[v*k2],temp[n2],c_out_codeword[n1],c_out_message[v*k1];
int c_index=0,m_index=0,i,j,m,index=0;
int erasure[1];
// cin decoding
printf("concatenated Cin decoding...\n");
for(j=0;j<w*32/n2;j++){
for(i=0;i<n2;i++){
temp[i]=c_in_codeword[c_index++];
}
decode_data(temp, n2);
if (check_syndrome () != 0) {
correct_errors_erasures(temp,n2,0,erasure);
}
for(i=0;i<k2;i++){
c_in_message[m_index++]=temp[k2];
}
}
//cout decoding: get the file and parity part
printf("concatenated Cout decoding...\n");
c_index=0;
for(i=0;i<v;i++){
index=0;
//create codeword
//copy message part
for(j=0;j<k1;j++){
c_out_codeword[index++]=c_in_message[j];
}
//copy parity part codeword
p = (m_index/2) + (i*d1);
for(j=0;j<d1;j++){
c_out_codeword[index++]=c_in_message[j+p];
}
decode_data(c_out_codeword, n1);
if (check_syndrome () != 0) {
correct_errors_erasures(c_out_codeword,n1,0,erasure);
}
for(j=0;j<k1;j++){
c_out_message[c_index++]=c_out_codeword[j];
}
}
//c_out_message contains v decoded blocks
//divide decoded message into v blocks from f1 to fv.
printf("updating Di...\n");
for(i=0;i<v;i++){
printf("indices[%d]=%lu\n",i,indices[i]);
//divide codeword into 32 byte blocks
int fi = indices[i];
char block[32];
for(j=0;j<32;j++){
block[j]=c_out_message[(i*32)+j];
}
//check if similar codeword was already decoded and present in Di
//if yes, just increase the frequency
int notfound=1;
for(j=0;j<alpha;j++){
int flag=1;
fflush(stdout);
if(db[fi].frequency[j]==0) break;
for(m=0;m<32;m++){
if(db[fi].file_blocks[j][m]!=block[m]){
flag=0;
break;
}
}
if(flag){
//int freq = db[fi].frequency[j];
db[fi].frequency[j]++;
notfound=0;
}
}
//if not found, add it in di
if(notfound){
for(m=0;m<32;m++){
db[fi].file_blocks[j][m] = block[m];
}
db[fi].frequency[j] = 1;
}
}
}
int edit_data(ADDRESS_BOOK *config)
{
int type;
int match_flag = 0;
int phone_flag = 0;
int count;
int index;
int i, j, k;
char buf[1024];
char format_str[1024];
char input_flag = 0;
FILE *fp;
char *filename = config->filename;
struct address_data search, data;
struct address_data list[1024];
int list_index[1024];
enum {
ID,
NAME,
ADDRESS,
PHONE,
};
do {
puts(
"Please choose entry\n"
"select search type\n"
"[ID, Name, Address, Phone]");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
if(!strcmp(buf, "id") |
!strcmp(buf, "Id") |
!strcmp(buf, "ID")) {
type = ID;
input_flag = 1;
} else if(!strcmp(buf, "name") |
!strcmp(buf, "Name") |
!strcmp(buf, "NAME")) {
type = NAME;
input_flag = 1;
} else if(!strcmp(buf, "address") |
!strcmp(buf, "Address") |
!strcmp(buf, "ADDRESS")) {
type = ADDRESS;
input_flag = 1;
} else if(!strcmp(buf, "phone") |
!strcmp(buf, "Phone") |
!strcmp(buf, "PHONE")) {
type = PHONE;
input_flag = 1;
}
} while(input_flag == 0);
switch(type) {
case ID:
do {
puts("Please enter id for edit");
printf("> ");
fgets(buf, sizeof(buf), stdin);
search.no = atoi(buf);
} while(search.no == 0);
break;
case NAME:
puts("Please enter name for edit");
printf("> ");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
strncpy(search.name, buf, sizeof(search.name));
break;
case ADDRESS:
puts("Please enter address for edit");
printf("> ");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
strncpy(search.address, buf, sizeof(search.address));
break;
case PHONE:
puts("Please enter phone number for edit");
printf("> ");
fgets(buf, sizeof(buf), stdin);
for(i = 0; buf[i] != '\n'; i++) {
search.phone[i] = buf[i] - '0';
}
search.phone[i] = END_OF_PHONE_NUMBER;
break;
}
fp = fopen(filename, "r");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", filename);
return -1;
}
for(count = 0, index = 0;;) {
match_flag = 0;
if(fgets(buf, sizeof(buf), fp) == 0) break;
data = decode_data(buf);
if(data.no == 0) continue;
list[count] = data;
list_index[count] = 0;
if(data.status == (0x01 << HIDE)) {
count++;
continue;
}
switch(type) {
case ID:
if(search.no == data.no)
match_flag = 1;
break;
case NAME:
if(!strcmp(search.name, data.name))
match_flag = 1;
else {
for(i = 0; data.name[i] != '\0'; i++) {
buf[i] = tolower(data.name[i]);
}
buf[i] = '\0';
if(!strcmp(search.name, buf))
match_flag = 1;
}
break;
case ADDRESS:
if(!strcmp(search.address, data.address))
match_flag = 1;
break;
case PHONE:
for(i = 0; search.phone[i] != END_OF_PHONE_NUMBER && data.phone[i] != END_OF_PHONE_NUMBER; i++) {
phone_flag = 0;
if(search.phone[i] != data.phone[i]) break;
phone_flag = 1;
}
if(phone_flag)
match_flag = 1;
break;
}
if(match_flag != 0) {
list_index[count] = 1;
index++;
}
count++;
}
if(index == 0) {
puts("Not found!");
} else if(index == 1) {
for(i = 0; i < count; i++) {
if(list_index[i] == 1) {
list[i].status = (0x01 << HIDE);
break;
}
}
} else if(index > 1) {
printf("Find some entries!\nChoose entry\n");
for(i = 0, j = 0; i < count; i++) {
if(list_index[i] == 1) {
sprintf(format_str, "| %%2d | %%%ds | %%%ds | ", config->width_name, config->width_address);
printf(format_str, j + 1, list[i].name, list[i].address);
for(k = 0; list[i].phone[k] != END_OF_PHONE_NUMBER; k++) {
printf("%d", list[i].phone[k]);
}
printf(" |\n");
j++;
}
}
fgets(buf, sizeof(buf), stdin);
for(i = 0, j = 0; i < count; i++) {
if(list_index[i] == 1) {
if((j - 1) == atoi(buf)) {
list[i].status = (0x01 << HIDE);
break;
}
j++;
}
}
}
fclose(fp);
fp = fopen(filename, "w");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", filename);
return -1;
}
for(i = 0; i < count; i++) {
fprintf(fp, "%d,%s,%s,", list[i].no, list[i].name, list[i].address);
for(k = 0; list[i].phone[k] != END_OF_PHONE_NUMBER; k++) {
fprintf(fp, "%d", list[i].phone[k]);
}
fprintf(fp, ",%d\n", list[i].status);
}
fclose(fp);
input_data(config, &data);
append_data_to_file(*config, data);
return 0;
}
void inner_GMD(decoded_blocks *db,unsigned char * c_in_codeword, unsigned long * indices, FILE * fp){
unsigned char c_in_message[n1*k2],temp[n2],c_out_codeword[n1],c_out_message[v*32];
int c_index=0,m_index=0,i,j,m,index=0;
int erasure_index[n1];
// cin decoding
printf("concatenated Cin decoding...\n");
for(j=0;j<n1;j++){
for(i=0;i<n2;i++){
temp[i]=c_in_codeword[c_index++];
}
unsigned char cpytemp[n2];
memcpy(cpytemp,temp,n2);
decode_data(temp, n2);
if (check_syndrome () != 0) {
int erasure[1];
correct_errors_erasures(temp,n2,0,erasure);
}
int delta_dist = 0;
for(i=0;i<n2;i++){
if(temp[i]!=cpytemp[i])
delta_dist++;
}
double prob;
if(delta_dist<d2/2)
prob = 2*(double)delta_dist/d2;
else
prob = 1.0;
srand(time(NULL));
double random_num = (double)rand() / (double)RAND_MAX;
for(i=0;i<k2;i++){
if (random_num<prob)
c_in_message[m_index++]=0;
else
c_in_message[m_index++]=temp[i];
}
if (random_num<prob)
erasure_index[n1] = 1;
else
erasure_index[n1] = 0;
}
//printf("display c_in_message\n");
//displayCharArray(c_in_message,sizeof(c_in_message));
printf("concatenated Cout decoding...\n");
c_index=0;
for(i=0;i<v;i++){
int erasure[n1];
int num_erasure = 0;
index=0;
//create codeword
//copy message part
for(j=0;j<k1;j++){
c_out_codeword[index++]=c_in_message[i*k1+j];
}
int p;
//copy parity part codeword
p = v*32 + (i*d1);
for(j=0;j<d1;j++){
c_out_codeword[index++]=c_in_message[j+p];
}
//printf("display c_out_codeword for %d\n",i);
//displayCharArray(c_out_codeword,sizeof(c_out_codeword));
if(erasure_index[v]==1) {
int ki;
for(ki=0;ki<k2;ki++) {
erasure[num_erasure] = ki;
num_erasure++;
}
}
if(erasure_index[v]==1) {
int di;
for(di=0;di<d2;di++) {
erasure[num_erasure] = k2+di;
num_erasure++;
}
}
decode_data(c_out_codeword, n1);
if (check_syndrome () != 0) {
correct_errors_erasures(c_out_codeword,n1,num_erasure,erasure);
}
for(j=0;j<k1;j++){
c_out_message[c_index++]=c_out_codeword[j];
}
}
//printf("updating Di...\n");
for(i=0;i<v;i++){
//printf("indices[%d]=%lu\n",i,indices[i]);
//divide codeword into 32 byte blocks
int fi = indices[i];
unsigned char block[32];
for(j=0;j<32;j++){
block[j]=c_out_message[(i*32)+j];
}
//check if similar codeword was already decoded and present in Di
//if yes, just increase the frequency
int notfound=1;
for(j=0;j<alpha;j++){
int flag=1;
if(db[fi].frequency[j]==0) break;
for(m=0;m<32;m++){
if(db[fi].file_blocks[j][m]!=block[m]){
flag=0;
break;
}
}
if(flag){
//int freq = db[fi].frequency[j];
db[fi].frequency[j]++;
notfound=0;
}
}
//if not found, add it in di
if(notfound){
for(m=0;m<32;m++){
db[fi].file_blocks[j][m] = block[m];
}
db[fi].frequency[j] = 1;
}
/*
printf("display db %d:\n",fi);
displayCharArray(db[fi].file_blocks[j],32);
fseek(fp,fi*32,SEEK_SET);
unsigned char buffer[32];
fread(buffer, 32, 1, fp);
printf("real content in the file block %d:\n",fi);
displayCharArray(buffer,32);
*/
}
}
int search(ADDRESS_BOOK config)
{
int type;
int match_flag = 0;
int phone_flag = 0;
int count;
int i;
int first_flag = 1;
char buf[1024];
char format_str[1024];
char input_flag = 0;
FILE *fp;
char *filename = config.filename;
struct address_data search, data;
enum {
ID,
NAME,
ADDRESS,
PHONE,
};
do {
puts(
"select search type\n"
"[ID, Name, Address, Phone]");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
if(!strcmp(buf, "id") |
!strcmp(buf, "Id") |
!strcmp(buf, "ID")) {
type = ID;
input_flag = 1;
} else if(!strcmp(buf, "name") |
!strcmp(buf, "Name") |
!strcmp(buf, "NAME")) {
type = NAME;
input_flag = 1;
} else if(!strcmp(buf, "address") |
!strcmp(buf, "Address") |
!strcmp(buf, "ADDRESS")) {
type = ADDRESS;
input_flag = 1;
} else if(!strcmp(buf, "phone") |
!strcmp(buf, "Phone") |
!strcmp(buf, "PHONE")) {
type = PHONE;
input_flag = 1;
}
} while(input_flag == 0);
switch(type) {
case ID:
do {
puts("Please enter id for search");
printf("> ");
fgets(buf, sizeof(buf), stdin);
search.no = atoi(buf);
} while(search.no == 0);
break;
case NAME:
puts("Please enter name for search");
printf("> ");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
strncpy(search.name, buf, sizeof(search.name));
break;
case ADDRESS:
puts("Please enter address for search");
printf("> ");
fgets(buf, sizeof(buf), stdin);
buf[strlen(buf) - 1] = '\0';
strncpy(search.address, buf, sizeof(search.address));
break;
case PHONE:
puts("Please enter phone number for search");
printf("> ");
fgets(buf, sizeof(buf), stdin);
for(i = 0; buf[i] != '\n'; i++) {
search.phone[i] = buf[i] - '0';
}
search.phone[i] = END_OF_PHONE_NUMBER;
break;
}
fp = fopen(filename, "r");
if(!fp) {
fprintf(stderr, "Error: file open [%s]\n", filename);
return -1;
}
puts("=========================");
for(count = 0;;) {
match_flag = 0;
if(fgets(buf, sizeof(buf), fp) == 0) break;
data = decode_data(buf);
if(data.no == 0) continue;
if(data.status == (0x01 << HIDE)) continue;
switch(type) {
case ID:
if(search.no == data.no)
match_flag = 1;
break;
case NAME:
if(!strcmp(search.name, data.name))
match_flag = 1;
else {
for(i = 0; data.name[i] != '\0'; i++) {
buf[i] = tolower(data.name[i]);
}
buf[i] = '\0';
if(!strcmp(search.name, buf))
match_flag = 1;
}
break;
case ADDRESS:
if(!strcmp(search.address, data.address))
match_flag = 1;
break;
case PHONE:
for(i = 0; search.phone[i] != END_OF_PHONE_NUMBER && data.phone[i] != END_OF_PHONE_NUMBER; i++) {
phone_flag = 0;
if(search.phone[i] != data.phone[i]) break;
phone_flag = 1;
}
if(phone_flag)
match_flag = 1;
break;
}
if(match_flag != 0) {
count++;
if(first_flag) {
sprintf(format_str, "| %%%ds | %%%ds | %%11s |\n", config.width_name, config.width_address);
printf(format_str, "Name", "Address", "Phone number");
first_flag = 0;
}
sprintf(format_str, "| %%%ds | %%%ds | ", config.width_name, config.width_address);
printf(format_str, data.name, data.address);
for(i = 0; data.phone[i] != END_OF_PHONE_NUMBER; i++) {
printf("%d", data.phone[i]);
}
printf(" |\n");
}
}
if(count == 0) {
puts("Not found!");
}
puts("=========================");
fclose(fp);
return 0;
}
int main(int argc, char** argv)
{
int rc = 0;
struct pando_buffer *bin_buf;
uint16_t payload_type = 0;
MQTTMessage msg;
unsigned char buf[500];
unsigned char readbuf[500];
char payload_type_c[] = {'c', 'e', 'd'};
bin_buf = construct_data_package_to_server(&payload_type);
decode_data(bin_buf, PAYLOAD_TYPE_DATA);
/* command test, event is same as command except the type */
bin_buf = constuct_event_package_to_server(&payload_type);
decode_command(bin_buf, PAYLOAD_TYPE_COMMAND);
return 0;
if (argc < 2)
usage();
char* topic = argv[1];
getopts(argc, argv);
if (strchr(topic, '#') || strchr(topic, '+'))
opts.showtopics = 1;
if (opts.showtopics)
printf("topic is %s\n", topic);
Network n;
Client c;
signal(SIGINT, cfinish);
signal(SIGTERM, cfinish);
NewNetwork(&n);
ConnectNetwork(&n, opts.host, opts.port);
MQTTClient(&c, &n, 1000, buf, 100, readbuf, 100);
MQTTPacket_connectData data = MQTTPacket_connectData_initializer;
data.willFlag = 0;
data.MQTTVersion = 3;
data.clientID.cstring = opts.clientid;
data.username.cstring = opts.username;
data.password.cstring = opts.password;
data.keepAliveInterval = 10;
data.cleansession = 1;
printf("Connecting to %s %d\n", opts.host, opts.port);
rc = MQTTConnect(&c, &data);
printf("Connected %d\n", rc);
printf("Subscribing to %s\n", topic);
rc = MQTTSubscribe(&c, topic, opts.qos, messageArrived);
printf("Subscribed %d\n", rc);
while (!toStop)
{
MQTTYield(&c, 1000);
if (toSend)
{
if (strstr(topic, "/d"))
{
/* data test */
bin_buf = construct_data_package_to_server(&payload_type);
//decode_data(bin_buf, PAYLOAD_TYPE_DATA);
}
if (strstr(topic, "/e"))
{
/* command test */
bin_buf = constuct_event_package_to_server(&payload_type);
//decode_command(bin_buf, PAYLOAD_TYPE_COMMAND);
}
msg.qos = opts.qos;
msg.retained = 0;
msg.dup = 0;
msg.payload = bin_buf->buffer + bin_buf->offset;
msg.payloadlen = bin_buf->buff_len - bin_buf->offset;
/*
before publish a message, you need to generate a topic with payload_type
max device id is 8 bytes, hex to char need 8*2 bytes, '/' need 1 byte, type need 1 byte
*/
char publish_topic[8*2 + 1 + 1];
memset(publish_topic, 0, sizeof(publish_topic));
sprintf(publish_topic, "%s/%c", opts.clientid, payload_type_c[payload_type - 1]);
printf(publish_topic);
rc = MQTTPublish(&c, publish_topic, &msg);
toSend = 0;
pd_free(bin_buf);
printf("published rc %d, len %d\n", rc, (int)msg.payloadlen);
}
}
printf("Stopping\n");
MQTTDisconnect(&c);
n.disconnect(&n);
return 0;
}
int main(void)
{
uint8_t aes_key_nr;
uint8_t loop = 0;
uint8_t loop2 = 0;
// delay 1s to avoid further communication with uart or RFM12 when my programmer resets the MC after 500ms...
_delay_ms(1000);
util_init();
check_eeprom_compatibility(DEVICETYPE_BASESTATION);
request_queue_init();
// read packetcounter, increase by cycle and write back
packetcounter = e2p_generic_get_packetcounter() + PACKET_COUNTER_WRITE_CYCLE;
e2p_generic_set_packetcounter(packetcounter);
// read device specific config
aes_key_count = e2p_basestation_get_aeskeycount();
device_id = e2p_generic_get_deviceid();
uart_init();
UART_PUTS("\r\n");
UART_PUTF4("smarthomatic Base Station v%u.%u.%u (%08lx)\r\n", VERSION_MAJOR, VERSION_MINOR, VERSION_PATCH, VERSION_HASH);
UART_PUTS("(c) 2012..2014 Uwe Freese, www.smarthomatic.org\r\n");
UART_PUTF("Device ID: %u\r\n", device_id);
UART_PUTF("Packet counter: %lu\r\n", packetcounter);
UART_PUTF("AES key count: %u\r\n", aes_key_count);
UART_PUTS("Waiting for incoming data. Press h for help.\r\n\r\n");
led_blink(500, 500, 3);
rfm12_init();
sei();
// ENCODE TEST (Move to unit test some day...)
/*
uint8_t testlen = 32;
uint8_t aes_key_num = 0;
memset(&bufx[0], 0, sizeof(bufx));
bufx[0] = 0xff;
bufx[1] = 0xb0;
bufx[2] = 0xa0;
bufx[3] = 0x3f;
bufx[4] = 0x01;
bufx[5] = 0x70;
bufx[6] = 0x00;
bufx[7] = 0x0c;
bufx[8] = 0xa8;
bufx[9] = 0x00;
bufx[10] = 0x20;
bufx[20] = 0x20;
eeprom_read_block (aes_key, (uint8_t *)(EEPROM_AESKEYS_BYTE + aes_key_num * 32), 32);
UART_PUTS("Using AES key ");
print_bytearray((uint8_t *)aes_key, 32);
UART_PUTS("Before encryption: ");
print_bytearray(bufx, testlen);
uint8_t aes_byte_count = aes256_encrypt_cbc(bufx, testlen);
UART_PUTF("byte count = %u\r\n", aes_byte_count);
UART_PUTS("After encryption: ");
print_bytearray(bufx, aes_byte_count);
aes256_decrypt_cbc(bufx, aes_byte_count);
UART_PUTS("After decryption: ");
print_bytearray(bufx, testlen);
while(1);
*/
while (42)
{
if (rfm12_rx_status() == STATUS_COMPLETE)
{
uint8_t len = rfm12_rx_len();
if ((len == 0) || (len % 16 != 0))
{
UART_PUTF("Received garbage (%u bytes not multiple of 16): ", len);
print_bytearray(bufx, len);
}
else // try to decrypt with all keys stored in EEPROM
{
bool crcok = false;
for (aes_key_nr = 0; aes_key_nr < aes_key_count ; aes_key_nr++)
{
memcpy(bufx, rfm12_rx_buffer(), len);
/*if (aes_key_nr == 0)
{
UART_PUTS("Before decryption: ");
print_bytearray(bufx, len);
}*/
e2p_basestation_get_aeskey(aes_key_nr, aes_key);
//UART_PUTS("Trying AES key 2 ");
//print_bytearray((uint8_t *)aes_key, 32);
aes256_decrypt_cbc(bufx, len);
//UART_PUTS("Decrypted bytes: ");
//print_bytearray(bufx, len);
crcok = pkg_header_check_crc32(len);
if (crcok)
{
//UART_PUTS("CRC correct, AES key found!\r\n");
UART_PUTF("Received (AES key %u): ", aes_key_nr);
print_bytearray(bufx, len);
decode_data(len);
break;
}
}
if (!crcok)
{
UART_PUTS("Received garbage (CRC wrong after decryption): ");
memcpy(bufx, rfm12_rx_buffer(), len);
print_bytearray(bufx, len);
}
UART_PUTS("\r\n");
}
//uart_hexdump((char *)bufcontents, rfm12_rx_len());
//UART_PUTS("\r\n");
// tell the implementation that the buffer can be reused for the next data.
rfm12_rx_clear();
}
// send data, if waiting in send buffer
if (send_data_avail)
{
uint8_t i;
// set AES key nr
aes_key_nr = hex_to_uint8((uint8_t *)cmdbuf, 1);
//UART_PUTF("AES KEY = %u\r\n", aes_key_nr);
// init packet buffer
memset(&bufx[0], 0, sizeof(bufx));
// set message type
uint8_t message_type = hex_to_uint8((uint8_t *)cmdbuf, 3);
pkg_header_set_messagetype(message_type);
pkg_header_adjust_offset();
//UART_PUTF("MessageType = %u\r\n", message_type);
uint8_t string_offset_data = 0;
/*
UART_PUTS("sKK00RRRRGGMM.............Get\r\n");
UART_PUTS("sKK01RRRRGGMMDD...........Set\r\n");
UART_PUTS("sKK02RRRRGGMMDD...........SetGet\r\n");
UART_PUTS("sKK08GGMMDD...............Status\r\n");
UART_PUTS("sKK09SSSSPPPPPPEE.........Ack\r\n");
UART_PUTS("sKK0ASSSSPPPPPPEEGGMMDD...AckStatus\r\n");
*/
// set header extension fields to the values given as hex string in the user input
switch (message_type)
{
case MESSAGETYPE_GET:
case MESSAGETYPE_SET:
case MESSAGETYPE_SETGET:
pkg_headerext_common_set_receiverid(hex_to_uint16((uint8_t *)cmdbuf, 5));
pkg_headerext_common_set_messagegroupid(hex_to_uint8((uint8_t *)cmdbuf, 9));
pkg_headerext_common_set_messageid(hex_to_uint8((uint8_t *)cmdbuf, 11));
string_offset_data = 12;
break;
case MESSAGETYPE_STATUS:
pkg_headerext_common_set_messagegroupid(hex_to_uint8((uint8_t *)cmdbuf, 5));
pkg_headerext_common_set_messageid(hex_to_uint8((uint8_t *)cmdbuf, 7));
string_offset_data = 8;
break;
case MESSAGETYPE_ACK:
pkg_headerext_common_set_acksenderid(hex_to_uint16((uint8_t *)cmdbuf, 5));
pkg_headerext_common_set_ackpacketcounter(hex_to_uint24((uint8_t *)cmdbuf, 9));
pkg_headerext_common_set_error(hex_to_uint8((uint8_t *)cmdbuf, 15));
// fallthrough!
case MESSAGETYPE_ACKSTATUS:
pkg_headerext_common_set_messagegroupid(hex_to_uint8((uint8_t *)cmdbuf, 17));
pkg_headerext_common_set_messageid(hex_to_uint8((uint8_t *)cmdbuf, 19));
string_offset_data = 20;
break;
}
uint8_t data_len_raw = 0;
// copy message data, which exists in all packets except in Get and Ack packets
if ((message_type != MESSAGETYPE_GET) && (message_type != MESSAGETYPE_ACK))
{
uint8_t data_len_raw = (strlen(cmdbuf) - 1 - string_offset_data) / 2;
//UART_PUTF("Data bytes = %u\r\n", data_len_raw);
uint8_t start = __HEADEROFFSETBITS / 8;
uint8_t shift = __HEADEROFFSETBITS % 8;
// copy message data, using __HEADEROFFSETBITS value and string_offset_data
for (i = 0; i < data_len_raw; i++)
{
uint8_t val = hex_to_uint8((uint8_t *)cmdbuf, string_offset_data + 2 * i + 1);
array_write_UIntValue(start + i, shift, 8, val, bufx);
}
}
// round packet length to x * 16 bytes
uint8_t packet_len = ((uint16_t)__HEADEROFFSETBITS + (uint16_t)data_len_raw * 8) / 8;
packet_len = ((packet_len - 1) / 16 + 1) * 16;
// send packet which doesn't require an acknowledge immediately
if ((message_type != MESSAGETYPE_GET) && (message_type != MESSAGETYPE_SET) && (message_type != MESSAGETYPE_SETGET))
{
send_packet(aes_key_nr, packet_len);
}
else // enqueue request (don't send immediately)
{
// header size = 9 bytes!
if (queue_request(pkg_headerext_common_get_receiverid(), message_type, aes_key_nr, bufx + 9, packet_len - 9))
{
UART_PUTF("Request added to queue (%u bytes packet).\r\n", packet_len);
}
else
{
UART_PUTS("Warning! Request queue full. Packet will not be sent.\r\n");
}
print_request_queue();
}
// clear cmdbuf to receive more input from UART
send_data_avail = false;
rfm12_tick();
led_blink(200, 0, 1);
}
// flash LED every second to show the device is alive
if (loop == 50)
{
led_blink(10, 10, 1);
loop = 0;
request_t* request = find_request_to_repeat(packetcounter + 1);
if (request != 0) // if request to repeat was found in queue
{
UART_PUTS("Repeating request.\r\n");
send_packet((*request).aes_key, (*request).data_bytes + 9); // header size = 9 bytes!
print_request_queue();
}
// Auto-send something for debugging purposes...
if (loop2 == 50)
{
//strcpy(cmdbuf, "s000102828300");
//send_data_avail = true;
loop2 = 0;
}
else
{
loop2++;
}
}
else
{
_delay_ms(20);
}
rfm12_tick();
loop++;
process_rxbuf();
if (uart_timeout > 0)
{
uart_timeout--;
if (uart_timeout == 0)
{
UART_PUTS("*** UART user timeout. Input was ignored. ***\r\n");
}
}
}
// never called
// aes256_done(&aes_ctx);
}
/**
* @brief Echo the data for the user supplied buffer with async support
*
* This function copies the request buffer to response buffer to show the
* non-zero copy functionality and to show the async support by wait for the
* flag and it got set in interrupt handler
*
* @param req_buf: Virtual address of the request buffer
* @param req_buf_len: Request buffer length
* @param res_buf: Virtual address of the response buffer
* @param res_buf_len: Response buffer length
* @param meta_data: Virtual address of the meta data of the encoded data
* @param ret_res_buf_len: Return length of the response buffer
*
* @return SMC return codes:
* SMC_SUCCESS: API processed successfully. \n
* SMC_*: An implementation-defined error code for any other error.
*/
int process_otz_echo_async_send_cmd(void *req_buf, u32 req_buf_len,
void *res_buf, u32 res_buf_len,
struct otzc_encode_meta *meta_data,
u32 *ret_res_buf_len)
{
echo_data_t echo_data;
char *out_buf;
int offset = 0, pos = 0, mapped = 0, type, out_len;
int task_id;
sw_tls *tls;
struct echo_global *echo_global;
task_id = get_current_task_id();
tls = get_task_tls(task_id);
echo_global = (struct echo_global *)tls->private_data;
if(!echo_global->data_available)
{
struct timer_event* tevent;
timeval_t time;
tevent = timer_event_create(&echo_task_handler,(void*)task_id);
if(!tevent){
sw_printf("SW: Out of Memory : Cannot register Handler\n");
return SMC_ENOMEM;
}
/* Time duration = 100ms */
time.tval.nsec = 100000000;
time.tval.sec = 0;
struct sw_task* task = get_task(task_id);
task->wq_head.elements_count = 0;
INIT_LIST_HEAD(&task->wq_head.elements_list);
task->wq_head.spin_lock.lock = 0;
timer_event_start(tevent,&time);
#ifdef ASYNC_DBG
sw_printf("SW: Before calling wait event \n");
#endif
sw_wait_event_async(&task->wq_head,
echo_global->data_available, SMC_PENDING);
#ifdef ASYNC_DBG
sw_printf("SW: Coming out from wait event \n");
#endif
}
if(req_buf_len > 0) {
while (offset <= req_buf_len) {
if(decode_data(req_buf, meta_data,
&type, &offset, &pos, &mapped, (void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
else {
if(type != OTZ_ENC_UINT32)
return SMC_EINVAL_ARG;
echo_data.len = *((u32*)out_buf);
}
if(decode_data(req_buf, meta_data,
&type, &offset, &pos, &mapped, (void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
else {
if(type != OTZ_ENC_ARRAY)
return SMC_EINVAL_ARG;
sw_memcpy(echo_data.data, out_buf, echo_data.len);
}
break;
}
}
offset = 0, pos = OTZ_MAX_REQ_PARAMS;
if(res_buf_len > 0) {
while (offset <= res_buf_len) {
if(decode_data(res_buf, meta_data,
&type, &offset, &pos, &mapped, (void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
else {
if(type != OTZ_ENC_ARRAY)
return SMC_EINVAL_ARG;
}
sw_memcpy(out_buf, echo_data.data, echo_data.len);
if(update_response_len(meta_data, pos, echo_data.len))
return SMC_EINVAL_ARG;
break;
}
*ret_res_buf_len = echo_data.len;
}
/*
sw_printf("SW: echo task data: %s\n", echo_data.data);
*/
/*
sw_printf("SW: echo send cmd %s and len 0x%x strlen 0x%x\n", echo_data.data,
echo_data.len, sw_strlen(echo_data.data));
*/
return 0;
}
int main ( void )
{
uint8_t aes_key_nr;
uint8_t loop = 0;
uint8_t loop2 = 0;
uint8_t data[22];
sbi(LED_DDR, LED_PIN);
// delay 1s to avoid further communication with uart or RFM12 when my programmer resets the MC after 500ms...
_delay_ms(1000);
request_queue_init();
// read packetcounter, increase by cycle and write back
packetcounter = eeprom_read_dword((uint32_t*)EEPROM_POS_PACKET_COUNTER) + PACKET_COUNTER_WRITE_CYCLE;
eeprom_write_dword((uint32_t*)0, packetcounter);
uart_init(true);
UART_PUTS ("\r\n");
UART_PUTS ("Open Home Control Base Station V1.0\r\n");
UART_PUTS ("(c) 2012 Uwe Freese, www.open-home-control.com\r\n");
UART_PUTF ("Packet counter: %lu\r\n", packetcounter);
UART_PUTS ("Waiting for incoming data. Press h for help.\r\n");
rfm12_init();
sei();
// ENCODE TEST
/*
uint8_t testlen = 64;
eeprom_read_block (aes_key, (uint8_t *)EEPROM_POS_AES_KEY, 32);
UART_PUTS("Using AES key ");
printbytearray((uint8_t *)aes_key, 32);
UART_PUTS("Before encryption: ");
printbytearray(bufx, testlen);
unsigned long crc = crc32(bufx, testlen);
UART_PUTF("CRC32 is %lx (added as last 4 bytes)\r\n", crc);
UART_PUTS("1\r\n");
crc = crc32(bufx, testlen - 4);
UART_PUTS("2\r\n");
setBuf32(testlen - 4, crc);
UART_PUTS("Before encryption (CRC added): ");
printbytearray(bufx, testlen);
UART_PUTS("1\r\n");
uint8_t aes_byte_count = aes256_encrypt_cbc(bufx, testlen);
UART_PUTS("2\r\n");
UART_PUTS("After encryption: ");
printbytearray(bufx, aes_byte_count);
UART_PUTF("String len = %u\r\n", aes_byte_count);
UART_PUTS("1\r\n");
aes256_decrypt_cbc(bufx, aes_byte_count);
UART_PUTS("2\r\n");
UART_PUTS("After decryption: ");
printbytearray(bufx, testlen);
crc = getBuf32(testlen - 4);
UART_PUTF("CRC32 is %lx (last 4 bytes from decrypted message)\r\n", crc);
printbytearray(bufx, testlen);
UART_PUTS("After decryption (CRC removed): ");
printbytearray(bufx, testlen);
UART_PUTF("String len = %u\r\n", testlen);
while(1);
*/
while (42)
{
if (rfm12_rx_status() == STATUS_COMPLETE)
{
uint8_t len = rfm12_rx_len();
if ((len == 0) || (len % 16 != 0))
{
UART_PUTF("Received garbage (%u bytes not multiple of 16): ", len);
printbytearray(bufx, len);
}
else // try to decrypt with all keys stored in EEPROM
{
uint32_t assumed_crc;
uint32_t actual_crc;
for(aes_key_nr = 0; aes_key_nr < AES_KEY_EEPROM_COUNT ; aes_key_nr++)
{
//strncpy((char *)bufx, (char *)rfm12_rx_buffer(), len);
memcpy(bufx, rfm12_rx_buffer(), len);
/*if (aes_key_nr == 0)
{
UART_PUTS("Before decryption: ");
printbytearray(bufx, len);
}*/
eeprom_read_block (aes_key, (uint8_t *)(EEPROM_POS_AES_KEY + aes_key_nr * 32), 32);
//UART_PUTS("Trying AES key ");
//printbytearray((uint8_t *)aes_key, 32);
aes256_decrypt_cbc(bufx, len);
//UART_PUTS("Decrypted bytes: ");
//printbytearray(bufx, len);
assumed_crc = getBuf32(len - 4);
actual_crc = crc32(bufx, len - 4);
//UART_PUTF("Received CRC32 would be %lx\r\n", assumed_crc);
//UART_PUTF("Re-calculated CRC32 is %lx\r\n", actual_crc);
if (assumed_crc == actual_crc)
{
//UART_PUTS("CRC correct, AES key found!\r\n");
UART_PUTF("Received (AES key %u): ", aes_key_nr);
printbytearray(bufx, len - 4);
decode_data(len - 4);
break;
}
}
if (assumed_crc != actual_crc)
{
UART_PUTS("Received garbage (CRC wrong after decryption).\r\n");
}
UART_PUTS("\r\n");
}
//uart_hexdump((char *)bufcontents, rfm12_rx_len());
//UART_PUTS("\r\n");
// tell the implementation that the buffer can be reused for the next data.
rfm12_rx_clear();
}
// send data, if waiting in send buffer
if (send_data_avail)
{
uint8_t i;
uint8_t data_len_raw = strlen(sendbuf) / 2 - 2;
// round data length to 6 + 16 bytes (including padding bytes)
uint8_t data_len = (((data_len_raw + 9) / 16) + 1) * 16 - 10;
// set aes key nr
aes_key_nr = hex_to_uint8((uint8_t *)sendbuf, 0);
//UART_PUTF("AES KEY = %u\r\n", aes_key_nr);
// set command id
uint8_t command_id = hex_to_uint8((uint8_t *)sendbuf, 2);
// set data
for (i = 0; i < data_len_raw; i++)
{
data[i] = hex_to_uint8((uint8_t *)sendbuf, 4 + 2 * i);
}
// set padding bytes
for (i = data_len_raw; i < data_len; i++)
{
data[i] = 0;
}
// send status packet immediately (command IDs are less than 128)
if (command_id < 128)
{
// set command id
bufx[5] = command_id;
// set data
memcpy(bufx + 6, data, data_len);
send_packet(aes_key_nr, data_len);
}
else // enqueue request (don't send immediately)
{
if (queue_request(data[0], command_id, aes_key_nr, data + 1))
{
UART_PUTS("Adding request to queue.\r\n");
}
else
{
UART_PUTS("Warning! Request queue full. Packet will not be sent.\r\n");
}
print_request_queue();
}
// clear send text buffer
send_data_avail = false;
rfm12_tick();
led_blink(200, 0, 1);
}
// flash LED every second to show the device is alive
if (loop == 50)
{
led_blink(10, 10, 1);
loop = 0;
if (set_repeat_request(packetcounter + 1)) // if request to repeat was found in queue
{
UART_PUTS("Repeating request.\r\n");
send_packet(0, 6);
print_request_queue();
}
// Auto-send something for debugging purposes...
if (loop2 == 50)
{
//strcpy(sendbuf, "008c0001003d");
//send_data_avail = true;
loop2 = 0;
}
else
{
loop2++;
}
}
else
{
_delay_ms(20);
}
rfm12_tick();
loop++;
process_rxbuf();
if (uart_timeout > 0)
{
uart_timeout--;
if (uart_timeout == 0)
{
UART_PUTS("*** UART user timeout. Input was ignored. ***\r\n");
}
}
}
// never called
// aes256_done(&aes_ctx);
}
int
main (int argc, char *argv[])
{
int erasures[16];
int nerasures = 0;
char* filename = argv[1];
char command[100];
printf("reading the original file %s\n",argv[1]);
//filename = argv[1];
sprintf(command,"md5 %s",argv[1]);
system(command);
/* Initialization the ECC library */
initialize_ecc ();
//Open file
file = fopen(argv[1], "r");
if (!file)
{
fprintf(stderr, "Unable to open file %s", argv[1]);
exit(1);
}
//Get file length
fseek(file, 0, SEEK_END);
fileLen=ftell(file);
fseek(file, 0, SEEK_SET);
//Allocate memory
buffer=(unsigned char *)malloc(fileLen+1);
if (!buffer)
{
fprintf(stderr, "Memory error!");
fclose(file);
exit(2);
}
//Read file contents into buffer
fread(buffer, fileLen, 1, file);
fclose(file);
long i = fileLen;
long pos = 0;
int writeFlag = TRUE;
strcat(filename,".encode");
printf("----------------------------------------------\n");
printf("encoding the original file into %s\n",filename);
while (i>0)
{
//system(command);
int msgLen;
if (i>256-NPAR) {
msgLen = 256-NPAR;
}
else {
msgLen = i;
}
unsigned char msg[msgLen];
int k;
for(k=0;k<msgLen;k++) {
msg[k] = buffer[pos];
pos++;
}
encode_data(msg, sizeof(msg), codeword);
if (writeFlag) {
file = fopen(filename, "w+");
writeFlag = FALSE;
}
else {
file = fopen(filename, "a+");
}
fwrite(codeword, msgLen+NPAR, 1, file);
fclose(file);
i = i - msgLen;
}
free(buffer);
sprintf(command,"md5 %s",filename);
system(command);
file = fopen(filename, "r");
if (!file)
{
fprintf(stderr, "Unable to open file %s", filename);
exit(1);
}
//Get file length
fseek(file, 0, SEEK_END);
fileLen=ftell(file);
fseek(file, 0, SEEK_SET);
//Allocate memory
buffer=(unsigned char *)malloc(fileLen+1);
if (!buffer)
{
fprintf(stderr, "Memory error!");
fclose(file);
exit(2);
}
//Read file contents into buffer
fread(buffer, fileLen, 1, file);
fclose(file);
i = fileLen;
pos = 0;
writeFlag = TRUE;
strcat(filename,".corrupt");
printf("----------------------------------------------\n");
printf("making some errors and write into the file %s\n",filename);
int k;
for(k = 0;k<10;k++) {
long h = rand()%fileLen;
buffer[h] = buffer[h] % 20;
}
file = fopen(filename, "w+");
fwrite(buffer, fileLen, 1, file);
fclose(file);
free(buffer);
sprintf(command,"md5 %s",filename);
system(command);
file = fopen(filename, "r");
if (!file)
{
fprintf(stderr, "Unable to open file %s", filename);
exit(1);
}
//Get file length
fseek(file, 0, SEEK_END);
fileLen=ftell(file);
fseek(file, 0, SEEK_SET);
//Allocate memory
buffer=(unsigned char *)malloc(fileLen+1);
if (!buffer)
{
fprintf(stderr, "Memory error!");
fclose(file);
exit(2);
}
//Read file contents into buffer
fread(buffer, fileLen, 1, file);
fclose(file);
i = fileLen;
pos = 0;
writeFlag = TRUE;
strcat(filename,".recover");
printf("----------------------------------------------\n");
printf("recovering corrupted file into %s\n",filename);
while (i>0)
{
int msgLen;
if (i>256) {
msgLen = 256;
}
else {
msgLen = i;
}
unsigned char msg[msgLen];
int k;
for(k=0;k<msgLen;k++) {
msg[k] = buffer[pos];
pos++;
}
decode_data(msg, msgLen);
if (check_syndrome () != 0) {
correct_errors_erasures (msg,msgLen,nerasures,erasures);
}
if (writeFlag) {
file = fopen(filename, "w+");
writeFlag = FALSE;
}
else {
file = fopen(filename, "a+");
}
fwrite(msg, msgLen-NPAR, 1, file);
fclose(file);
i = i - msgLen;
}
sprintf(command,"md5 %s",filename);
system(command);
free(buffer);
exit(0);
}
/**
* @brief Test the mutex operations
*
* This function tests the functionality of mutex and semaphores
*
* @param req_buf: Virtual address of the request buffer
* @param req_buf_len: Request buffer length
* @param res_buf: Virtual address of the response buffer
* @param res_buf_len: Response buffer length
* @param meta_data: Virtual address of the meta data of the encoded data
* @param ret_res_buf_len: Return length of the response buffer
*
* @return SMC return codes:
* SMC_SUCCESS: API processed successfully. \n
* SMC_*: An implementation-defined error code for any other error.
*/
int process_otz_mutex_test_cmd(void *req_buf, u32 req_buf_len,
void *res_buf, u32 res_buf_len,
struct otzc_encode_meta *meta_data,
u32 *ret_res_buf_len)
{
otz_mutex_test_data_t otz_mutex_test_data;
unsigned char *out_buf;
int offset = 0, pos = 0, mapped = 0, type, out_len=0;
while (offset <= req_buf_len) {
if(decode_data(req_buf, meta_data, &type, &offset, &pos, &mapped,
(void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
if(type != OTZ_ENC_UINT32) {
return SMC_EINVAL_ARG;
}
otz_mutex_test_data.len = *((u32*)out_buf);
if(decode_data(req_buf, meta_data, &type, &offset, &pos, &mapped,
(void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
if(type != OTZ_ENC_ARRAY) {
return SMC_EINVAL_ARG;
}
if(out_len < DATA_BUF_LEN) {
sw_memcpy(otz_mutex_test_data.data, out_buf, out_len);
} else {
return(SMC_ENOMEM);
}
break;
}
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Attempting to lock the variable \n");
#endif
if(sw_mutex_lock(&g_otz_mutex) == OTZ_INVALID) {
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Unable to lock mutex. It is invalid \n");
#endif
goto handle_error;
}
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Lock successful. Trying to lock it one more time \n");
#endif
if(sw_mutex_trylock(&g_otz_mutex) == OTZ_BUSY) {
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Mutex already locked. We cannot lock it anymore !! \n");
#endif
}
sw_mutex_unlock(&g_otz_mutex);
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Unlock successful. Trying to lock it one more time \n");
#endif
if(sw_mutex_trylock(&g_otz_mutex) == OTZ_BUSY) {
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Error while unlocking the mutex !! \n");
#endif
goto handle_error;
}
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Going to sleep \n");
#endif
usleep(10);
#ifndef CONFIG_SW_ELF_LOADER_SUPPORT
sw_printf("SW: Second time locking successful \n");
#endif
sw_mutex_unlock(&g_otz_mutex);
handle_error:
offset = 0, pos = OTZ_MAX_REQ_PARAMS;
while (offset <= res_buf_len) {
if(decode_data(res_buf, meta_data, &type, &offset, &pos, &mapped,
(void**)&out_buf, &out_len)) {
return SMC_EINVAL_ARG;
}
if(type != OTZ_ENC_ARRAY) {
return SMC_EINVAL_ARG;
}
if(out_len >= otz_mutex_test_data.len) {
sw_memcpy(out_buf,otz_mutex_test_data.response, otz_mutex_test_data.len);
if(update_response_len(meta_data, pos, otz_mutex_test_data.len)) {
return SMC_EINVAL_ARG;
}
} else {
return(SMC_ENOMEM);
}
break;
}
*ret_res_buf_len = otz_mutex_test_data.len;
return 0;
}
