static int serio_bind_driver(struct serio *serio, struct serio_driver *drv)
{
int error;
if (serio_match_port(drv->id_table, serio)) {
serio->dev.driver = &drv->driver;
if (serio_connect_driver(serio, drv)) {
serio->dev.driver = NULL;
return -ENODEV;
}
error = device_bind_driver(&serio->dev);
if (error) {
dev_warn(&serio->dev,
"device_bind_driver() failed for %s (%s) and %s, error: %d\n",
serio->phys, serio->name,
drv->description, error);
serio_disconnect_driver(serio);
serio->dev.driver = NULL;
return error;
}
}
return 0;
}
static int do_devs_build(struct platform_driver * drv) {
int ret = 0;
int lnk_err = 0;
outputs = platform_device_alloc(do4_dev_out_name,0);
if(outputs) {
outputs->dev.release = do_dev_release; // Release-Function
platform_device_add(outputs);
platform_set_drvdata(outputs, &do4_O_Outputs);// dem DO-Platform Device die Datenstruktur mitgeben
outputs->dev.driver = &drv->driver;
lnk_err = device_bind_driver(&outputs->dev);
do4_sysfs_dev_add(&outputs->dev); // DO-Devices-SYSFS erzeugen
}
else {
// Resource-Meldung!
printk(KERN_ERR "%s %s(): %s %s error!\n",__FILE__, __FUNCTION__,"Resource ",do4_dev_out_name);
ret = -ENOMEM;
}
if(ret) {
if( outputs) {
platform_set_drvdata(outputs,NULL); // DO-Platform-Device Datenzeiger aufheben
platform_device_unregister(outputs); // DO-Platform-Device entfernen
do4_sysfs_dev_del(&outputs->dev); // DO-Devices-SYSFS entfernen
}
}
return ret;
}
/**
* device_attach - try to attach device to a driver.
* @dev: device.
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching driver was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent lock must be held.
*/
int device_attach(struct device *dev)
{
int ret = 0;
device_lock(dev);
if (dev->driver) {
if (klist_node_attached(&dev->p->knode_driver)) {
ret = 1;
goto out_unlock;
}
ret = device_bind_driver(dev);
if (ret == 0)
ret = 1;
else {
dev->driver = NULL;
ret = 0;
}
} else {
pm_runtime_get_noresume(dev);
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
pm_runtime_put_sync(dev);
}
out_unlock:
device_unlock(dev);
return ret;
}
static int rk3036_clk_bind(struct udevice *dev)
{
int ret;
struct udevice *sys_child;
struct sysreset_reg *priv;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
&sys_child);
if (ret) {
debug("Warning: No sysreset driver: ret=%d\n", ret);
} else {
priv = malloc(sizeof(struct sysreset_reg));
priv->glb_srst_fst_value = offsetof(struct rk3036_cru,
cru_glb_srst_fst_value);
priv->glb_srst_snd_value = offsetof(struct rk3036_cru,
cru_glb_srst_snd_value);
sys_child->priv = priv;
}
#if CONFIG_IS_ENABLED(CONFIG_RESET_ROCKCHIP)
ret = offsetof(struct rk3036_cru, cru_softrst_con[0]);
ret = rockchip_reset_bind(dev, ret, 9);
if (ret)
debug("Warning: software reset driver bind faile\n");
#endif
return 0;
}
static int qemu_cpu_fixup(void)
{
int ret;
int cpu_num;
int cpu_online;
struct udevice *dev, *pdev;
struct cpu_platdata *plat;
char *cpu;
/* first we need to find '/cpus' */
for (device_find_first_child(dm_root(), &pdev);
pdev;
device_find_next_child(&pdev)) {
if (!strcmp(pdev->name, "cpus"))
break;
}
if (!pdev) {
printf("unable to find cpus device\n");
return -ENODEV;
}
/* calculate cpus that are already bound */
cpu_num = 0;
for (uclass_find_first_device(UCLASS_CPU, &dev);
dev;
uclass_find_next_device(&dev)) {
cpu_num++;
}
/* get actual cpu number */
cpu_online = qemu_fwcfg_online_cpus();
if (cpu_online < 0) {
printf("unable to get online cpu number: %d\n", cpu_online);
return cpu_online;
}
/* bind addtional cpus */
dev = NULL;
for (; cpu_num < cpu_online; cpu_num++) {
/*
* allocate device name here as device_bind_driver() does
* not copy device name, 8 bytes are enough for
* sizeof("cpu@") + 3 digits cpu number + '\0'
*/
cpu = malloc(8);
if (!cpu) {
printf("unable to allocate device name\n");
return -ENOMEM;
}
sprintf(cpu, "cpu@%d", cpu_num);
ret = device_bind_driver(pdev, "cpu_qemu", cpu, &dev);
if (ret) {
printf("binding cpu@%d failed: %d\n", cpu_num, ret);
return ret;
}
plat = dev_get_parent_platdata(dev);
plat->cpu_id = cpu_num;
}
return 0;
}
static int i2c_bind_driver(struct udevice *bus, uint chip_addr,
struct udevice **devp)
{
struct dm_i2c_chip chip;
char name[30], *str;
struct udevice *dev;
int ret;
snprintf(name, sizeof(name), "generic_%x", chip_addr);
str = strdup(name);
ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
if (ret)
goto err_bind;
/* Tell the device what we know about it */
memset(&chip, '\0', sizeof(chip));
chip.chip_addr = chip_addr;
chip.offset_len = 1; /* we assume */
ret = device_probe_child(dev, &chip);
debug("%s: device_probe_child: ret=%d\n", __func__, ret);
if (ret)
goto err_probe;
*devp = dev;
return 0;
err_probe:
device_unbind(dev);
err_bind:
free(str);
return ret;
}
int board_late_init(void)
{
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
watchdog_dev = NULL;
if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
debug("Watchdog: Not found by seq!\n");
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
puts("Watchdog: Not found!\n");
return 0;
}
}
wdt_start(watchdog_dev, 0, 0);
puts("Watchdog: Started\n");
#endif /* !CONFIG_SPL_BUILD && CONFIG_WDT */
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE)
int ret;
ret = device_bind_driver(gd->dm_root, "mb_soft_reset",
"reset_soft", NULL);
if (ret)
printf("Warning: No reset driver: ret=%d\n", ret);
#endif
return 0;
}
static void serio_bind_driver(struct serio *serio, struct serio_driver *drv)
{
int error;
down_write(&serio_bus.subsys.rwsem);
if (serio_match_port(drv->id_table, serio)) {
serio->dev.driver = &drv->driver;
if (serio_connect_driver(serio, drv)) {
serio->dev.driver = NULL;
goto out;
}
error = device_bind_driver(&serio->dev);
if (error) {
printk(KERN_WARNING
"serio: device_bind_driver() failed "
"for %s (%s) and %s, error: %d\n",
serio->phys, serio->name,
drv->description, error);
serio_disconnect_driver(serio);
serio->dev.driver = NULL;
goto out;
}
}
out:
up_write(&serio_bus.subsys.rwsem);
}
/**
* phy_attach - attach a network device to a particular PHY device
* @dev: network device to attach
* @phy_id: PHY device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
* Description: Called by drivers to attach to a particular PHY
* device. The phy_device is found, and properly hooked up
* to the phy_driver. If no driver is attached, then the
* genphy_driver is used. The phy_device is given a ptr to
* the attaching device, and given a callback for link status
* change. The phy_device is returned to the attaching driver.
*/
struct phy_device *phy_attach(struct net_device *dev,
const char *phy_id, u32 flags, phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
struct device *d;
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
if (d) {
phydev = to_phy_device(d);
} else {
printk(KERN_ERR "%s not found\n", phy_id);
return ERR_PTR(-ENODEV);
}
/* Assume that if there is no driver, that it doesn't
* exist, and we should use the genphy driver. */
if (NULL == d->driver) {
int err;
d->driver = &genphy_driver.driver;
err = d->driver->probe(d);
if (err >= 0)
err = device_bind_driver(d);
if (err)
return ERR_PTR(err);
}
if (phydev->attached_dev) {
printk(KERN_ERR "%s: %s already attached\n",
dev->name, phy_id);
return ERR_PTR(-EBUSY);
}
phydev->attached_dev = dev;
phydev->dev_flags = flags;
phydev->interface = interface;
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
if (phydev->drv->config_init) {
int err;
err = phydev->drv->config_init(phydev);
if (err < 0)
return ERR_PTR(err);
}
return phydev;
}
/**
* device_attach - try to attach device to a driver.
* @dev: device.
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching device was found; error code otherwise.
*
* When called for a USB interface, @dev->parent->sem must be held.
*/
int device_attach(struct device * dev)
{
int ret = 0;
down(&dev->sem);
if (dev->driver) {
device_bind_driver(dev);
ret = 1;
} else
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
up(&dev->sem);
return ret;
}
static void gameport_bind_driver(struct gameport *gameport, struct gameport_driver *drv)
{
down_write(&gameport_bus.subsys.rwsem);
gameport->dev.driver = &drv->driver;
if (drv->connect(gameport, drv)) {
gameport->dev.driver = NULL;
goto out;
}
device_bind_driver(&gameport->dev);
out:
up_write(&gameport_bus.subsys.rwsem);
}
static void serio_bind_driver(struct serio *serio, struct serio_driver *drv)
{
down_write(&serio_bus.subsys.rwsem);
if (serio_match_port(drv->id_table, serio)) {
serio->dev.driver = &drv->driver;
if (serio_connect_driver(serio, drv)) {
serio->dev.driver = NULL;
goto out;
}
device_bind_driver(&serio->dev);
}
out:
up_write(&serio_bus.subsys.rwsem);
}
int axp_gpio_init(void)
{
struct udevice *dev;
int ret;
ret = pmic_bus_init();
if (ret)
return ret;
/* There is no devicetree support for the axp yet, so bind directly */
ret = device_bind_driver(dm_root(), "gpio_axp", "AXP-gpio", &dev);
if (ret)
return ret;
return 0;
}
void sunxi_musb_board_init(void)
{
#ifdef CONFIG_USB_MUSB_HOST
struct udevice *dev;
/*
* Bind the driver directly for now as musb linux kernel support is
* still pending upstream so our dts files do not have the necessary
* nodes yet. TODO: Remove this as soon as the dts nodes are in place
* and bind by compatible instead.
*/
device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
#else
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
#endif
}
struct phy_device *phy_attach(struct net_device *dev,
const char *phy_id, u32 flags)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
struct device *d;
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
if (d) {
phydev = to_phy_device(d);
} else {
printk(KERN_ERR "%s not found\n", phy_id);
return ERR_PTR(-ENODEV);
}
/* Assume that if there is no driver, that it doesn't
* exist, and we should use the genphy driver. */
if (NULL == d->driver) {
int err;
down_write(&d->bus->subsys.rwsem);
d->driver = &genphy_driver.driver;
err = d->driver->probe(d);
if (err < 0)
return ERR_PTR(err);
device_bind_driver(d);
up_write(&d->bus->subsys.rwsem);
}
if (phydev->attached_dev) {
printk(KERN_ERR "%s: %s already attached\n",
dev->name, phy_id);
return ERR_PTR(-EBUSY);
}
phydev->attached_dev = dev;
phydev->dev_flags = flags;
return phydev;
}
/**
* driver_probe_device - attempt to bind device & driver.
* @drv: driver.
* @dev: device.
*
* First, we call the bus's match function, if one present, which
* should compare the device IDs the driver supports with the
* device IDs of the device. Note we don't do this ourselves
* because we don't know the format of the ID structures, nor what
* is to be considered a match and what is not.
*
* This function returns 1 if a match is found, an error if one
* occurs (that is not -ENODEV or -ENXIO), and 0 otherwise.
*
* This function must be called with @dev->sem held. When called
* for a USB interface, @dev->parent->sem must be held as well.
*/
int driver_probe_device(struct device_driver * drv, struct device * dev)
{
int ret = 0;
if (drv->bus->match && !drv->bus->match(dev, drv))
goto Done;
pr_debug("%s: Matched Device %s with Driver %s\n",
drv->bus->name, dev->bus_id, drv->name);
dev->driver = drv;
if (dev->bus->probe) {
ret = dev->bus->probe(dev);
if (ret) {
dev->driver = NULL;
goto ProbeFailed;
}
} else if (drv->probe) {
ret = drv->probe(dev);
if (ret) {
dev->driver = NULL;
goto ProbeFailed;
}
}
device_bind_driver(dev);
ret = 1;
pr_debug("%s: Bound Device %s to Driver %s\n",
drv->bus->name, dev->bus_id, drv->name);
goto Done;
ProbeFailed:
if (ret == -ENODEV || ret == -ENXIO) {
/* Driver matched, but didn't support device
* or device not found.
* Not an error; keep going.
*/
ret = 0;
} else {
/* driver matched but the probe failed */
printk(KERN_WARNING
"%s: probe of %s failed with error %d\n",
drv->name, dev->bus_id, ret);
}
Done:
return ret;
}
/**
* device_attach - try to attach device to a driver.
* @dev: device.
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching device was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent->sem must be held.
*/
int device_attach(struct device *dev)
{
int ret = 0;
down(&dev->sem);
if (dev->driver) {
ret = device_bind_driver(dev);
if (ret == 0)
ret = 1;
else {
dev->driver = NULL;
ret = 0;
}
} else {
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
}
up(&dev->sem);
return ret;
}
/**
* device_attach - try to attach device to a driver.
* @dev: device.
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching device was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent->sem must be held.
*/
int device_attach(struct device *dev) /* 将设备绑定到它的驱动程序上*/
{
int ret = 0;
down(&dev->sem);
if (dev->driver) { /* 如果dev->driver不为空，表明当前设备dev已经和它的驱动程序进行了绑定*/
ret = device_bind_driver(dev);/* 则调用该函数在sysfs文件树中建立与其驱动程序之间的互联关系 */
if (ret == 0)
ret = 1;
else {
dev->driver = NULL; /* 否则设置设备的驱动为空 */
ret = 0;
}
} else { /* 否则dev->driver = NULL，则表明当前设备对象dev还没有和它的驱动程序绑定，此时需要遍
历dev所在总线dev->bus上挂载的所有驱动程序对象 */
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach); /* 遍历挂在总线上的所有驱动对象drv，调用__device_attach进行绑定*/
}
up(&dev->sem);
return ret;
}
/**
* usb_driver_claim_interface - bind a driver to an interface
* @driver: the driver to be bound
* @iface: the interface to which it will be bound; must be in the
* usb device's active configuration
* @priv: driver data associated with that interface
*
* This is used by usb device drivers that need to claim more than one
* interface on a device when probing (audio and acm are current examples).
* No device driver should directly modify internal usb_interface or
* usb_device structure members.
*
* Few drivers should need to use this routine, since the most natural
* way to bind to an interface is to return the private data from
* the driver's probe() method.
*
* Callers must own the device lock and the driver model's usb_bus_type.subsys
* writelock. So driver probe() entries don't need extra locking,
* but other call contexts may need to explicitly claim those locks.
*/
int usb_driver_claim_interface(struct usb_driver *driver,
struct usb_interface *iface, void* priv)
{
struct device *dev = &iface->dev;
if (dev->driver)
return -EBUSY;
dev->driver = &driver->driver;
usb_set_intfdata(iface, priv);
iface->condition = USB_INTERFACE_BOUND;
mark_active(iface);
/* if interface was already added, bind now; else let
* the future device_add() bind it, bypassing probe()
*/
if (device_is_registered(dev))
device_bind_driver(dev);
return 0;
}
/// MBUS-DEVICE erzeugen
int mbus_build(struct platform_driver * drv, unsigned char instance) {
int ret = 0;
int lnk_err;
unsigned char mbus_slvs;
DEBUG(MCT_DEBUG_LEVEL1, "%s %s()\n",__FILE__, __FUNCTION__);
/// OVERLOAD SecAddr[1-3]
for(mbus_slvs= 0; mbus_slvs < MBUS_SLVS; mbus_slvs++) {
ret= mbus_if_secaddr_by_macaddr(&la.l2.slvs[mbus_slvs].sec_addr[1]);
}
pdev = platform_device_alloc(MBUS_DEVICE_INTERFACE,instance);
pdev->dev.release = mbus_dev_release;
platform_device_add(pdev); // MBUS-Platf.Dev registrieren
platform_set_drvdata(pdev,&la); // MBUS-Platf.Dev. Datenzeiger
pdev->dev.driver = &drv->driver;
lnk_err = device_bind_driver(&pdev->dev); // symbolischen Link
ret= mbus_if_create_bin_file(&pdev->dev.kobj);
return ret;
};
/**
* device_attach - try to attach device to a driver.
* @dev: device.
*
* Walk the list of drivers that the bus has and call
* driver_probe_device() for each pair. If a compatible
* pair is found, break out and return.
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching driver was found;
* -ENODEV if the device is not registered.
*
* When called for a USB interface, @dev->parent->mutex must be held.
*/
int device_attach(struct device *dev)
{
int ret = 0;
mutex_lock(&dev->mutex);
if (dev->driver) {
ret = device_bind_driver(dev);
if (ret == 0)
ret = 1;
else {
dev->driver = NULL;
ret = 0;
}
} else {
pm_runtime_get_noresume(dev);
ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
pm_runtime_put_sync(dev);
}
mutex_unlock(&dev->mutex);
return ret;
}
static int i2c_bind_driver(struct udevice *bus, uint chip_addr, uint offset_len,
struct udevice **devp)
{
struct dm_i2c_chip *chip;
char name[30], *str;
struct udevice *dev;
int ret;
snprintf(name, sizeof(name), "generic_%x", chip_addr);
str = strdup(name);
if (!str)
return -ENOMEM;
ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
if (ret)
goto err_bind;
/* Tell the device what we know about it */
chip = dev_get_parent_platdata(dev);
chip->chip_addr = chip_addr;
chip->offset_len = offset_len;
ret = device_probe(dev);
debug("%s: device_probe: ret=%d\n", __func__, ret);
if (ret)
goto err_probe;
*devp = dev;
return 0;
err_probe:
/*
* If the device failed to probe, unbind it. There is nothing there
* on the bus so we don't want to leave it lying around
*/
device_unbind(dev);
err_bind:
free(str);
return ret;
}
int blk_create_device(struct udevice *parent, const char *drv_name,
const char *name, int if_type, int devnum, int blksz,
lbaint_t size, struct udevice **devp)
{
struct blk_desc *desc;
struct udevice *dev;
int ret;
ret = device_bind_driver(parent, drv_name, name, &dev);
if (ret)
return ret;
desc = dev_get_uclass_platdata(dev);
desc->if_type = if_type;
desc->blksz = blksz;
desc->lba = size / blksz;
desc->part_type = PART_TYPE_UNKNOWN;
desc->bdev = dev;
desc->devnum = devnum;
*devp = dev;
return 0;
}
static int gameport_bind_driver(struct gameport *gameport, struct gameport_driver *drv)
{
int error;
gameport->dev.driver = &drv->driver;
if (drv->connect(gameport, drv)) {
gameport->dev.driver = NULL;
return -ENODEV;
}
error = device_bind_driver(&gameport->dev);
if (error) {
dev_warn(&gameport->dev,
"device_bind_driver() failed for %s (%s) and %s, error: %d\n",
gameport->phys, gameport->name,
drv->description, error);
drv->disconnect(gameport);
gameport->dev.driver = NULL;
return error;
}
return 0;
}
/// MODBUS-DEVICE erzeugen
int modbus_build(struct platform_driver * drv,unsigned char slot) {
int ret = 0;
int lnk_err;
char slotstr[2] = {0x00,0x00};
DEBUG(MCT_DEBUG_LEVEL1, "%s %s()\n",__FILE__, __FUNCTION__);
/// Overload MODBUS-Addr
la.l2.slvs[MODBUS_SLV_0].pri_addr += (slot*10);
/// INTERFACE-NAME
strcpy(dio42_dev_if_modbus,MODBUS_DEVICE_INTERFACE);
slotstr[0]= slot +0x30;
strcat(dio42_dev_if_modbus,slotstr);
pdev = platform_device_alloc(dio42_dev_if_modbus,0);
pdev->dev.release = modbus_dev_release;
platform_device_add(pdev); // MODBUS-Platf.Dev registrieren
platform_set_drvdata(pdev,&la); // MODBUS-Platf.Dev. Datenzeiger
pdev->dev.driver = &drv->driver;
lnk_err = device_bind_driver(&pdev->dev); // symbolischen Link
ret= modbus_if_create_bin_file(&pdev->dev.kobj);
return ret;
};
/* Set up the display ready for use */
static int video_post_probe(struct udevice *dev)
{
struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
struct video_priv *priv = dev_get_uclass_priv(dev);
char name[30], drv[15], *str;
const char *drv_name = drv;
struct udevice *cons;
int ret;
/* Set up the line and display size */
priv->fb = map_sysmem(plat->base, plat->size);
priv->line_length = priv->xsize * VNBYTES(priv->bpix);
priv->fb_size = priv->line_length * priv->ysize;
/* Set up colours - we could in future support other colours */
#ifdef CONFIG_SYS_WHITE_ON_BLACK
priv->colour_fg = 0xffffff;
#else
priv->colour_bg = 0xffffff;
#endif
video_clear(dev);
/*
* Create a text console device. For now we always do this, although
* it might be useful to support only bitmap drawing on the device
* for boards that don't need to display text. We create a TrueType
* console if enabled, a rotated console if the video driver requests
* it, otherwise a normal console.
*
* The console can be override by setting vidconsole_drv_name before
* probing this video driver, or in the probe() method.
*
* TrueType does not support rotation at present so fall back to the
* rotated console in that case.
*/
if (!priv->rot && IS_ENABLED(CONFIG_CONSOLE_TRUETYPE)) {
snprintf(name, sizeof(name), "%s.vidconsole_tt", dev->name);
strcpy(drv, "vidconsole_tt");
} else {
snprintf(name, sizeof(name), "%s.vidconsole%d", dev->name,
priv->rot);
snprintf(drv, sizeof(drv), "vidconsole%d", priv->rot);
}
str = strdup(name);
if (!str)
return -ENOMEM;
if (priv->vidconsole_drv_name)
drv_name = priv->vidconsole_drv_name;
ret = device_bind_driver(dev, drv_name, str, &cons);
if (ret) {
debug("%s: Cannot bind console driver\n", __func__);
return ret;
}
ret = device_probe(cons);
if (ret) {
debug("%s: Cannot probe console driver\n", __func__);
return ret;
}
return 0;
};
/*-----------------------------------------------------------------------------
* This func is used to create all the necessary stuff, bind
* the fixed phy driver and register all it on the mdio_bus_type.
* speed is either 10 or 100, duplex is boolean.
* number is used to create multiple fixed PHYs, so that several devices can
* utilize them simultaneously.
*-----------------------------------------------------------------------------*/
static int fixed_mdio_register_device(int number, int speed, int duplex)
{
struct mii_bus *new_bus;
struct fixed_info *fixed;
struct phy_device *phydev;
int err = 0;
struct device* dev = kzalloc(sizeof(struct device), GFP_KERNEL);
if (NULL == dev)
return -ENOMEM;
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
if (NULL == new_bus) {
kfree(dev);
return -ENOMEM;
}
fixed = kzalloc(sizeof(struct fixed_info), GFP_KERNEL);
if (NULL == fixed) {
kfree(dev);
kfree(new_bus);
return -ENOMEM;
}
fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL);
fixed->regs_num = MII_REGS_NUM;
fixed->phy_status.speed = speed;
fixed->phy_status.duplex = duplex;
fixed->phy_status.link = 1;
new_bus->name = "Fixed MII Bus",
new_bus->read = &fixed_mii_read,
new_bus->write = &fixed_mii_write,
new_bus->reset = &fixed_mii_reset,
/*set up workspace*/
fixed_mdio_update_regs(fixed);
new_bus->priv = fixed;
new_bus->dev = dev;
dev_set_drvdata(dev, new_bus);
/* create phy_device and register it on the mdio bus */
phydev = phy_device_create(new_bus, 0, 0);
/*
Put the phydev pointer into the fixed pack so that bus read/write code could
be able to access for instance attached netdev. Well it doesn't have to do
so, only in case of utilizing user-specified link-update...
*/
fixed->phydev = phydev;
if(NULL == phydev) {
err = -ENOMEM;
goto device_create_fail;
}
phydev->irq = -1;
phydev->dev.bus = &mdio_bus_type;
if(number)
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
"fixed_%d@%d:%d", number, speed, duplex);
else
snprintf(phydev->dev.bus_id, BUS_ID_SIZE,
"fixed@%d:%d", speed, duplex);
phydev->bus = new_bus;
err = device_register(&phydev->dev);
if(err) {
printk(KERN_ERR "Phy %s failed to register\n",
phydev->dev.bus_id);
goto bus_register_fail;
}
/*
the mdio bus has phy_id match... In order not to do it
artificially, we are binding the driver here by hand;
it will be the same for all the fixed phys anyway.
*/
down_write(&phydev->dev.bus->subsys.rwsem);
phydev->dev.driver = &fixed_mdio_driver.driver;
err = phydev->dev.driver->probe(&phydev->dev);
if(err < 0) {
printk(KERN_ERR "Phy %s: problems with fixed driver\n",phydev->dev.bus_id);
up_write(&phydev->dev.bus->subsys.rwsem);
goto probe_fail;
}
device_bind_driver(&phydev->dev);
up_write(&phydev->dev.bus->subsys.rwsem);
return 0;
probe_fail:
device_unregister(&phydev->dev);
bus_register_fail:
kfree(phydev);
device_create_fail:
kfree(dev);
kfree(new_bus);
kfree(fixed);
return err;
}
int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp)
{
struct udevice *bus, *dev;
struct dm_spi_slave_platdata *plat;
bool created = false;
int ret;
ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
if (ret) {
printf("Invalid bus %d (err=%d)\n", busnum, ret);
return ret;
}
ret = spi_find_chip_select(bus, cs, &dev);
/*
* If there is no such device, create one automatically. This means
* that we don't need a device tree node or platform data for the
* SPI flash chip - we will bind to the correct driver.
*/
if (ret == -ENODEV && drv_name) {
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
ret = device_bind_driver(bus, drv_name, dev_name, &dev);
if (ret)
return ret;
plat = dev_get_parent_platdata(dev);
plat->cs = cs;
plat->max_hz = speed;
plat->mode = mode;
created = true;
} else if (ret) {
printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs,
ret);
return ret;
}
if (!device_active(dev)) {
struct spi_slave *slave;
ret = device_probe(dev);
if (ret)
goto err;
slave = dev_get_parent_priv(dev);
slave->dev = dev;
}
plat = dev_get_parent_platdata(dev);
if (!speed) {
speed = plat->max_hz;
mode = plat->mode;
}
ret = spi_set_speed_mode(bus, speed, mode);
if (ret)
goto err;
*busp = bus;
*devp = dev_get_parent_priv(dev);
debug("%s: bus=%p, slave=%p\n", __func__, bus, *devp);
return 0;
err:
debug("%s: Error path, created=%d, device '%s'\n", __func__,
created, dev->name);
if (created) {
device_remove(dev);
device_unbind(dev);
}
return ret;
}
