QString readWindowsSymLink(const QString &path)
{
QString result;
FileHandleWrapper dirHandle(path);
if (dirHandle.handle() != INVALID_HANDLE_VALUE) {
REPARSE_DATA_BUFFER* reparseStructData = (REPARSE_DATA_BUFFER*)calloc(1, MAXIMUM_REPARSE_DATA_BUFFER_SIZE);
DWORD bytesReturned = 0;
if (::DeviceIoControl(dirHandle.handle(), FSCTL_GET_REPARSE_POINT, 0, 0, reparseStructData,
MAXIMUM_REPARSE_DATA_BUFFER_SIZE, &bytesReturned, 0)) {
if (reparseStructData->ReparseTag == IO_REPARSE_TAG_MOUNT_POINT) {
int length = reparseStructData->MountPointReparseBuffer.SubstituteNameLength / sizeof(wchar_t);
int offset = reparseStructData->MountPointReparseBuffer.SubstituteNameOffset / sizeof(wchar_t);
const wchar_t* PathBuffer = &reparseStructData->MountPointReparseBuffer.PathBuffer[offset];
result = QString::fromWCharArray(PathBuffer, length);
} else if (reparseStructData->ReparseTag == IO_REPARSE_TAG_SYMLINK) {
int length = reparseStructData->SymbolicLinkReparseBuffer.SubstituteNameLength / sizeof(wchar_t);
int offset = reparseStructData->SymbolicLinkReparseBuffer.SubstituteNameOffset / sizeof(wchar_t);
const wchar_t* PathBuffer = &reparseStructData->SymbolicLinkReparseBuffer.PathBuffer[offset];
result = QString::fromWCharArray(PathBuffer, length);
}
// cut-off "//?/" and "/??/"
if (result.size() > 4 && result.at(0) == QLatin1Char('\\') && result.at(2) == QLatin1Char('?') && result.at(3) == QLatin1Char('\\'))
result = result.mid(4);
}
free(reparseStructData);
}
return result;
}
void CqTiffOutputFile::nextSubImage(const CqTexFileHeader& header)
{
m_fileHandle->writeDirectory();
m_currentLine = 0;
// Write header data to this directory.
CqTiffDirHandle dirHandle(m_fileHandle);
dirHandle.writeHeader(header);
}
void CqTiffOutputFile::writeTiledPixels(const CqMixedImageBuffer& buffer)
{
SqTileInfo tileInfo = m_header.find<Attr::TileInfo>();
// Check that the buffer has a height that is a multiple of the tile height.
if( buffer.height() % tileInfo.height != 0
&& m_currentLine + buffer.height() != m_header.height() )
{
AQSIS_THROW_XQERROR(XqInternal, EqE_Bug,
"pixel buffer with height = " << buffer.height() << " must be a multiple "
"of requested tile height (= " << tileInfo.height << ") or run exactly to "
"the full image height (= " << m_header.height() << ").");
}
CqTiffDirHandle dirHandle(m_fileHandle);
const TqUint8* rawBuf = buffer.rawData();
const TqInt bytesPerPixel = buffer.channelList().bytesPerPixel();
boost::scoped_array<TqUint8> tileBuf(
new TqUint8[bytesPerPixel*tileInfo.width*tileInfo.height]);
const TqInt rowStride = bytesPerPixel*buffer.width();
const TqInt tileRowStride = bytesPerPixel*tileInfo.width;
const TqInt endLine = m_currentLine + buffer.height();
const TqInt numTileCols = (buffer.width()-1)/tileInfo.width + 1;
for(TqInt line = m_currentLine; line < endLine; line += tileInfo.height)
{
// srcBuf will point to the beginning of the memory region which will
// become the tile.
const TqUint8* srcBuf = rawBuf;
for(TqInt tileCol = 0; tileCol < numTileCols; ++tileCol)
{
const TqInt tileDataLen = min(tileRowStride,
rowStride - tileCol*tileRowStride);
const TqInt tileDataHeight = min(tileInfo.height, buffer.height() - line);
// Copy parts of the scanlines into the tile buffer.
stridedCopy(tileBuf.get(), tileRowStride, srcBuf, rowStride,
tileDataHeight, tileDataLen);
TIFFWriteTile(dirHandle.tiffPtr(),
reinterpret_cast<tdata_t>(const_cast<TqUint8*>(tileBuf.get())),
tileCol*tileInfo.width, line, 0, 0);
srcBuf += tileRowStride;
}
rawBuf += rowStride*tileInfo.height;
}
m_currentLine = endLine;
}
Link createJunction(const QString &linkPath, const QString &targetPath)
{
if (!QDir().mkpath(linkPath)) {
qWarning() << "Cannot create the mount directory" << linkPath;
return Link(linkPath);
}
FileHandleWrapper dirHandle(linkPath);
if (dirHandle.handle() == INVALID_HANDLE_VALUE) {
qWarning() << "Cannot open" << linkPath << ":" << QInstaller::windowsErrorString(GetLastError());
return Link(linkPath);
}
const QString szDestDir = QString::fromLatin1("\\??\\").arg(targetPath).replace(QLatin1Char('/'),
QLatin1Char('\\'));
// Allocates a block of memory for an array of num elements(1) and initializes all its bits to zero.
REPARSE_DATA_BUFFER* reparseStructData = (REPARSE_DATA_BUFFER*)calloc(1,
MAXIMUM_REPARSE_DATA_BUFFER_SIZE);
reparseStructData->Reserved = 0;
reparseStructData->ReparseTag = IO_REPARSE_TAG_MOUNT_POINT;
reparseStructData->MountPointReparseBuffer.PrintNameLength = 0;
reparseStructData->MountPointReparseBuffer.SubstituteNameOffset = 0;
reparseStructData->MountPointReparseBuffer.SubstituteNameLength = szDestDir.length();
reparseStructData->MountPointReparseBuffer.PrintNameOffset = szDestDir.length() + sizeof(WCHAR);
uint spaceAfterGeneralData = sizeof(USHORT) * 5 + sizeof(WCHAR); //should be 12
reparseStructData->ReparseDataLength = szDestDir.length() + spaceAfterGeneralData;
#ifndef Q_CC_MINGW
StringCchCopy(reparseStructData->MountPointReparseBuffer.PathBuffer, 1024, (wchar_t*)szDestDir.utf16());
#else
wcsncpy(reparseStructData->MountPointReparseBuffer.PathBuffer, (wchar_t*)szDestDir.utf16(), 1024);
#endif
DWORD bytesReturned;
if (!::DeviceIoControl(dirHandle.handle(), FSCTL_SET_REPARSE_POINT, reparseStructData,
reparseStructData->ReparseDataLength + REPARSE_DATA_BUFFER_HEADER_SIZE, 0, 0,
&bytesReturned, 0)) {
qWarning() << "Cannot set the reparse point for" << linkPath << "to" << targetPath
<< ":" << QInstaller::windowsErrorString(GetLastError());
}
return Link(linkPath);
}
void CqTiffOutputFile::initialize()
{
// make sure all channels are the same type.
if(m_header.channelList().sharedChannelType() == Channel_TypeUnknown)
AQSIS_THROW_XQERROR(XqInternal, EqE_Limit,
"tiff cannot store multiple pixel types in the same image");
// Use lzw compression if the compression hasn't been specified.
if(!m_header.findPtr<Attr::Compression>())
m_header.set<Attr::Compression>("lzw");
// Timestamp the file.
m_header.setTimestamp();
/// \todo more checking & validation of the header.
// Now load the initial settings into the TIFF.
CqTiffDirHandle dirHandle(m_fileHandle);
dirHandle.writeHeader(m_header);
}
void CqTiffOutputFile::writeScanlinePixels(const CqMixedImageBuffer& buffer)
{
CqTiffDirHandle dirHandle(m_fileHandle);
// Simplest possible implementation using scanline TIFF I/O. Could use
// Strip-based IO if performance is ever a problem here.
const TqUint8* rawBuf = buffer.rawData();
const TqInt rowStride = buffer.channelList().bytesPerPixel()*buffer.width();
const TqInt endLine = m_currentLine + buffer.height();
// Temporary buffer for scanlines. We need to copy the data into here
// since libtiff trashes the buffer when encoding is turned on. (The TIFF
// docs don't seem to mention this though, ugh.)
boost::scoped_array<TqUint8> lineBuf(new TqUint8[rowStride]);
for(TqInt line = m_currentLine; line < endLine; ++line)
{
// copy the data into temp buffer.
std::memcpy(lineBuf.get(), rawBuf, rowStride);
// write data
TIFFWriteScanline( dirHandle.tiffPtr(), reinterpret_cast<tdata_t>(lineBuf.get()),
static_cast<uint32>(line) );
rawBuf += rowStride;
}
m_currentLine = endLine;
}
bool removeJunction(const QString &path)
{
// Allocates a block of memory for an array of num elements(1) and initializes all its bits to zero.
REPARSE_DATA_BUFFER* reparseStructData = (REPARSE_DATA_BUFFER*)calloc(1,
MAXIMUM_REPARSE_DATA_BUFFER_SIZE);
reparseStructData->ReparseTag = IO_REPARSE_TAG_MOUNT_POINT;
{ // extra scope because we need to close the dirHandle before we can remove that directory
FileHandleWrapper dirHandle(path);
DWORD bytesReturned;
if (!::DeviceIoControl(dirHandle.handle(), FSCTL_DELETE_REPARSE_POINT, reparseStructData,
REPARSE_GUID_DATA_BUFFER_HEADER_SIZE, 0, 0,
&bytesReturned, 0)) {
qWarning() << "Cannot remove the reparse point" << path << ":" << QInstaller::windowsErrorString(GetLastError());
return false;
}
}
return QDir().rmdir(path);
}