static void do_display(const struct termios *mode, const int all)
{
int i;
tcflag_t *bitsp;
unsigned long mask;
int prev_type = control;
display_speed(mode, 1);
if (all)
display_window_size(1);
#ifdef HAVE_C_LINE
wrapf("line = %d;\n", mode->c_line);
#else
wrapf("\n");
#endif
for (i = 0; control_info[i].name != stty_min; ++i) {
/* If swtch is the same as susp, don't print both */
#if VSWTCH == VSUSP
if (control_info[i].name == stty_swtch)
continue;
#endif
/* If eof uses the same slot as min, only print whichever applies */
#if VEOF == VMIN
if ((mode->c_lflag & ICANON) == 0
&& (control_info[i].name == stty_eof
|| control_info[i].name == stty_eol)) continue;
#endif
wrapf("%s = %s;", control_info[i].name,
visible(mode->c_cc[control_info[i].offset]));
}
#if VEOF == VMIN
if ((mode->c_lflag & ICANON) == 0)
#endif
wrapf("min = %d; time = %d;", mode->c_cc[VMIN], mode->c_cc[VTIME]);
if (current_col) wrapf("\n");
for (i = 0; i < NUM_mode_info; ++i) {
if (mode_info[i].flags & OMIT)
continue;
if (mode_info[i].type != prev_type) {
/* wrapf("\n"); */
if (current_col) wrapf("\n");
prev_type = mode_info[i].type;
}
bitsp = mode_type_flag(mode_info[i].type, mode);
mask = mode_info[i].mask ? mode_info[i].mask : mode_info[i].bits;
if ((*bitsp & mask) == mode_info[i].bits) {
if (all || (mode_info[i].flags & SANE_UNSET))
wrapf("%s", mode_info[i].name);
} else {
if ((all && mode_info[i].flags & REV) ||
(!all &&
(mode_info[i].flags & (SANE_SET | REV)) == (SANE_SET | REV)))
wrapf("-%s", mode_info[i].name);
}
}
if (current_col) wrapf("\n");
}
static void
display_all(struct termios *mode, int fd, const char *device_name)
{
int i;
tcflag_t *bitsp;
unsigned long mask;
enum mode_type prev_type = control;
display_speed(mode, 1);
#ifdef TIOCGWINSZ
display_window_size(1, fd, device_name);
#endif
#ifdef HAVE_C_LINE
wrapf("line = %d;", mode->c_line);
#endif
putchar('\n');
current_col = 0;
for (i = 0; control_info[i].name != stty_min; ++i) {
/* If swtch is the same as susp, don't print both. */
#if VSWTCH == VSUSP
if (control_info[i].name == stty_swtch)
continue;
#endif
/* If eof uses the same slot as min, only print whichever applies. */
#if VEOF == VMIN
if ((mode->c_lflag & ICANON) == 0
&& (control_info[i].name == stty_eof
|| control_info[i].name == stty_eol)) continue;
#endif
wrapf("%s = %s;", control_info[i].name,
visible(mode->c_cc[control_info[i].offset]));
}
#if VEOF == VMIN
if ((mode->c_lflag & ICANON) == 0)
#endif
wrapf("min = %d; time = %d;", mode->c_cc[VMIN], mode->c_cc[VTIME]);
if (current_col != 0)
putchar('\n');
current_col = 0;
for (i = 0; i < NUM_mode_info; ++i) {
if (mode_info[i].flags & OMIT)
continue;
if (mode_info[i].type != prev_type) {
putchar('\n');
current_col = 0;
prev_type = mode_info[i].type;
}
bitsp = mode_type_flag(mode_info[i].type, mode);
mask = mode_info[i].mask ? mode_info[i].mask : mode_info[i].bits;
if ((*bitsp & mask) == mode_info[i].bits)
wrapf("%s", mode_info[i].name);
else if (mode_info[i].flags & REV)
wrapf("-%s", mode_info[i].name);
}
putchar('\n');
current_col = 0;
}
static void do_display(const struct termios *mode, int all)
{
int i;
tcflag_t *bitsp;
unsigned long mask;
int prev_type = control;
display_speed(mode, 1);
if (all)
display_window_size(1);
#ifdef __linux__
wrapf("line = %u;\n", mode->c_line);
#else
newline();
#endif
for (i = 0; i != CIDX_min; ++i) {
char ch;
/* If swtch is the same as susp, don't print both */
#if VSWTCH == VSUSP
if (i == CIDX_swtch)
continue;
#endif
/* If eof uses the same slot as min, only print whichever applies */
#if VEOF == VMIN
if (!(mode->c_lflag & ICANON)
&& (i == CIDX_eof || i == CIDX_eol)
) {
continue;
}
#endif
ch = mode->c_cc[control_info[i].offset];
if (ch == _POSIX_VDISABLE)
strcpy(G.buf, "<undef>");
else
visible(ch, G.buf, 0);
wrapf("%s = %s;", nth_string(control_name, i), G.buf);
}
#if VEOF == VMIN
if ((mode->c_lflag & ICANON) == 0)
#endif
wrapf("min = %u; time = %u;", mode->c_cc[VMIN], mode->c_cc[VTIME]);
newline();
for (i = 0; i < NUM_mode_info; ++i) {
if (mode_info[i].flags & OMIT)
continue;
if (mode_info[i].type != prev_type) {
newline();
prev_type = mode_info[i].type;
}
bitsp = get_ptr_to_tcflag(mode_info[i].type, mode);
mask = mode_info[i].mask ? mode_info[i].mask : mode_info[i].bits;
if ((*bitsp & mask) == mode_info[i].bits) {
if (all || (mode_info[i].flags & SANE_UNSET))
wrapf("-%s"+1, nth_string(mode_name, i));
} else {
if ((all && mode_info[i].flags & REV)
|| (!all && (mode_info[i].flags & (SANE_SET | REV)) == (SANE_SET | REV))
) {
wrapf("-%s", nth_string(mode_name, i));
}
}
}
newline();
}
int stty_main(int argc UNUSED_PARAM, char **argv)
{
struct termios mode;
void (*output_func)(const struct termios *, int);
const char *file_name = NULL;
int display_all = 0;
int stty_state;
int k;
INIT_G();
stty_state = STTY_noargs;
output_func = do_display;
/* First pass: only parse/verify command line params */
k = 0;
while (argv[++k]) {
const struct mode_info *mp;
const struct control_info *cp;
const char *arg = argv[k];
const char *argnext = argv[k+1];
int param;
if (arg[0] == '-') {
int i;
mp = find_mode(arg+1);
if (mp) {
if (!(mp->flags & REV))
goto invalid_argument;
stty_state &= ~STTY_noargs;
continue;
}
/* It is an option - parse it */
i = 0;
while (arg[++i]) {
switch (arg[i]) {
case 'a':
stty_state |= STTY_verbose_output;
output_func = do_display;
display_all = 1;
break;
case 'g':
stty_state |= STTY_recoverable_output;
output_func = display_recoverable;
break;
case 'F':
if (file_name)
bb_error_msg_and_die("only one device may be specified");
file_name = &arg[i+1]; /* "-Fdevice" ? */
if (!file_name[0]) { /* nope, "-F device" */
int p = k+1; /* argv[p] is argnext */
file_name = argnext;
if (!file_name)
bb_error_msg_and_die(bb_msg_requires_arg, "-F");
/* remove -F param from arg[vc] */
while (argv[p]) {
argv[p] = argv[p+1];
++p;
}
}
goto end_option;
default:
goto invalid_argument;
}
}
end_option:
continue;
}
mp = find_mode(arg);
if (mp) {
stty_state &= ~STTY_noargs;
continue;
}
cp = find_control(arg);
if (cp) {
if (!argnext)
bb_error_msg_and_die(bb_msg_requires_arg, arg);
/* called for the side effect of xfunc death only */
set_control_char_or_die(cp, argnext, &mode);
stty_state &= ~STTY_noargs;
++k;
continue;
}
param = find_param(arg);
if (param & param_need_arg) {
if (!argnext)
bb_error_msg_and_die(bb_msg_requires_arg, arg);
++k;
}
switch (param) {
#ifdef __linux__
case param_line:
# ifndef TIOCGWINSZ
xatoul_range_sfx(argnext, 1, INT_MAX, stty_suffixes);
break;
# endif /* else fall-through */
#endif
#ifdef TIOCGWINSZ
case param_rows:
case param_cols:
case param_columns:
xatoul_range_sfx(argnext, 1, INT_MAX, stty_suffixes);
break;
case param_size:
#endif
case param_speed:
break;
case param_ispeed:
/* called for the side effect of xfunc death only */
set_speed_or_die(input_speed, argnext, &mode);
break;
case param_ospeed:
/* called for the side effect of xfunc death only */
set_speed_or_die(output_speed, argnext, &mode);
break;
default:
if (recover_mode(arg, &mode) == 1) break;
if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) break;
invalid_argument:
bb_error_msg_and_die("invalid argument '%s'", arg);
}
stty_state &= ~STTY_noargs;
}
/* Specifying both -a and -g is an error */
if ((stty_state & (STTY_verbose_output | STTY_recoverable_output)) ==
(STTY_verbose_output | STTY_recoverable_output)
) {
bb_error_msg_and_die("-a and -g are mutually exclusive");
}
/* Specifying -a or -g with non-options is an error */
if ((stty_state & (STTY_verbose_output | STTY_recoverable_output))
&& !(stty_state & STTY_noargs)
) {
bb_error_msg_and_die("modes may not be set when -a or -g is used");
}
/* Now it is safe to start doing things */
if (file_name) {
G.device_name = file_name;
xmove_fd(xopen_nonblocking(G.device_name), STDIN_FILENO);
ndelay_off(STDIN_FILENO);
}
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure */
memset(&mode, 0, sizeof(mode));
if (tcgetattr(STDIN_FILENO, &mode))
perror_on_device_and_die("%s");
if (stty_state & (STTY_verbose_output | STTY_recoverable_output | STTY_noargs)) {
G.max_col = get_terminal_width(STDOUT_FILENO);
output_func(&mode, display_all);
return EXIT_SUCCESS;
}
/* Second pass: perform actions */
k = 0;
while (argv[++k]) {
const struct mode_info *mp;
const struct control_info *cp;
const char *arg = argv[k];
const char *argnext = argv[k+1];
int param;
if (arg[0] == '-') {
mp = find_mode(arg+1);
if (mp) {
set_mode(mp, 1 /* reversed */, &mode);
stty_state |= STTY_require_set_attr;
}
/* It is an option - already parsed. Skip it */
continue;
}
mp = find_mode(arg);
if (mp) {
set_mode(mp, 0 /* non-reversed */, &mode);
stty_state |= STTY_require_set_attr;
continue;
}
cp = find_control(arg);
if (cp) {
++k;
set_control_char_or_die(cp, argnext, &mode);
stty_state |= STTY_require_set_attr;
continue;
}
param = find_param(arg);
if (param & param_need_arg) {
++k;
}
switch (param) {
#ifdef __linux__
case param_line:
mode.c_line = xatoul_sfx(argnext, stty_suffixes);
stty_state |= STTY_require_set_attr;
break;
#endif
#ifdef TIOCGWINSZ
case param_cols:
case param_columns:
set_window_size(-1, xatoul_sfx(argnext, stty_suffixes));
break;
case param_size:
display_window_size(0);
break;
case param_rows:
set_window_size(xatoul_sfx(argnext, stty_suffixes), -1);
break;
#endif
case param_speed:
display_speed(&mode, 0);
break;
case param_ispeed:
set_speed_or_die(input_speed, argnext, &mode);
stty_state |= (STTY_require_set_attr | STTY_speed_was_set);
break;
case param_ospeed:
set_speed_or_die(output_speed, argnext, &mode);
stty_state |= (STTY_require_set_attr | STTY_speed_was_set);
break;
default:
if (recover_mode(arg, &mode) == 1)
stty_state |= STTY_require_set_attr;
else /* true: if (tty_value_to_baud(xatou(arg)) != (speed_t) -1) */{
set_speed_or_die(both_speeds, arg, &mode);
stty_state |= (STTY_require_set_attr | STTY_speed_was_set);
} /* else - impossible (caught in the first pass):
bb_error_msg_and_die("invalid argument '%s'", arg); */
}
}
if (stty_state & STTY_require_set_attr) {
struct termios new_mode;
if (tcsetattr(STDIN_FILENO, TCSADRAIN, &mode))
perror_on_device_and_die("%s");
/* POSIX (according to Zlotnick's book) tcsetattr returns zero if
it performs *any* of the requested operations. This means it
can report 'success' when it has actually failed to perform
some proper subset of the requested operations. To detect
this partial failure, get the current terminal attributes and
compare them to the requested ones */
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure */
memset(&new_mode, 0, sizeof(new_mode));
if (tcgetattr(STDIN_FILENO, &new_mode))
perror_on_device_and_die("%s");
if (memcmp(&mode, &new_mode, sizeof(mode)) != 0) {
/*
* I think the below chunk is not necessary on Linux.
* If you are deleting it, also delete STTY_speed_was_set bit -
* it is only ever checked here.
*/
#if 0 /* was "if CIBAUD" */
/* SunOS 4.1.3 (at least) has the problem that after this sequence,
tcgetattr (&m1); tcsetattr (&m1); tcgetattr (&m2);
sometimes (m1 != m2). The only difference is in the four bits
of the c_cflag field corresponding to the baud rate. To save
Sun users a little confusion, don't report an error if this
happens. But suppress the error only if we haven't tried to
set the baud rate explicitly -- otherwise we'd never give an
error for a true failure to set the baud rate */
new_mode.c_cflag &= (~CIBAUD);
if ((stty_state & STTY_speed_was_set)
|| memcmp(&mode, &new_mode, sizeof(mode)) != 0)
#endif
perror_on_device_and_die("%s: cannot perform all requested operations");
}
}
return EXIT_SUCCESS;
}
extern int main(int argc, char **argv)
#endif
{
struct termios mode;
enum output_type output_type;
int optc;
int require_set_attr;
int speed_was_set;
int verbose_output;
int recoverable_output;
int k;
int noargs = 1;
char * file_name = NULL;
int fd;
const char *device_name;
output_type = changed;
verbose_output = 0;
recoverable_output = 0;
/* Don't print error messages for unrecognized options. */
opterr = 0;
while ((optc = getopt(argc, argv, "agF:")) != -1) {
switch (optc) {
case 'a':
verbose_output = 1;
output_type = all;
break;
case 'g':
recoverable_output = 1;
output_type = recoverable;
break;
case 'F':
if (file_name)
error_msg_and_die("only one device may be specified");
file_name = optarg;
break;
default: /* unrecognized option */
noargs = 0;
break;
}
if (noargs == 0)
break;
}
if (optind < argc)
noargs = 0;
/* Specifying both -a and -g gets an error. */
if (verbose_output && recoverable_output)
error_msg_and_die ("verbose and stty-readable output styles are mutually exclusive");
/* Specifying any other arguments with -a or -g gets an error. */
if (!noargs && (verbose_output || recoverable_output))
error_msg_and_die ("modes may not be set when specifying an output style");
/* FIXME: it'd be better not to open the file until we've verified
that all arguments are valid. Otherwise, we could end up doing
only some of the requested operations and then failing, probably
leaving things in an undesirable state. */
if (file_name) {
int fdflags;
device_name = file_name;
fd = open(device_name, O_RDONLY | O_NONBLOCK);
if (fd < 0)
perror_msg_and_die("%s", device_name);
if ((fdflags = fcntl(fd, F_GETFL)) == -1
|| fcntl(fd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
perror_msg_and_die("%s: couldn't reset non-blocking mode",
device_name);
} else {
fd = 0;
device_name = "standard input";
}
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure. */
memset(&mode, 0, sizeof(mode));
if (tcgetattr(fd, &mode))
perror_msg_and_die("%s", device_name);
if (verbose_output || recoverable_output || noargs) {
max_col = screen_columns();
current_col = 0;
display_settings(output_type, &mode, fd, device_name);
return EXIT_SUCCESS;
}
speed_was_set = 0;
require_set_attr = 0;
k = 0;
while (++k < argc) {
int match_found = 0;
int reversed = 0;
int i;
if (argv[k][0] == '-') {
char *find_dev_opt;
++argv[k];
/* Handle "-a", "-ag", "-aF/dev/foo", "-aF /dev/foo", etc.
Find the options that have been parsed. This is really
gross, but it's needed because stty SETTINGS look like options to
getopt(), so we need to work around things in a really horrible
way. If any new options are ever added to stty, the short option
MUST NOT be a letter which is the first letter of one of the
possible stty settings.
*/
find_dev_opt = strchr(argv[k], 'F'); /* find -*F* */
if(find_dev_opt) {
if(find_dev_opt[1]==0) /* -*F /dev/foo */
k++; /* skip /dev/foo */
continue; /* else -*F/dev/foo - no skip */
}
if(argv[k][0]=='a' || argv[k][0]=='g')
continue;
/* Is not options - is reverse params */
reversed = 1;
}
for (i = 0; i < NUM_mode_info; ++i)
if (STREQ(argv[k], mode_info[i].name)) {
match_found = set_mode(&mode_info[i], reversed, &mode);
require_set_attr = 1;
break;
}
if (match_found == 0 && reversed)
error_msg_and_die("invalid argument `%s'", --argv[k]);
if (match_found == 0)
for (i = 0; i < NUM_control_info; ++i)
if (STREQ(argv[k], control_info[i].name)) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
match_found = 1;
++k;
set_control_char(&control_info[i], argv[k], &mode);
require_set_attr = 1;
break;
}
if (match_found == 0) {
if (STREQ(argv[k], "ispeed")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_speed(input_speed, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
} else if (STREQ(argv[k], "ospeed")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_speed(output_speed, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
}
#ifdef TIOCGWINSZ
else if (STREQ(argv[k], "rows")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_window_size((int) parse_number(argv[k], stty_suffixes),
-1, fd, device_name);
} else if (STREQ(argv[k], "cols") || STREQ(argv[k], "columns")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
set_window_size(-1,
(int) parse_number(argv[k], stty_suffixes),
fd, device_name);
} else if (STREQ(argv[k], "size")) {
max_col = screen_columns();
current_col = 0;
display_window_size(0, fd, device_name);
}
#endif
#ifdef HAVE_C_LINE
else if (STREQ(argv[k], "line")) {
if (k == argc - 1)
error_msg_and_die("missing argument to `%s'", argv[k]);
++k;
mode.c_line = parse_number(argv[k], stty_suffixes);
require_set_attr = 1;
}
#endif
else if (STREQ(argv[k], "speed")) {
max_col = screen_columns();
display_speed(&mode, 0);
} else if (recover_mode(argv[k], &mode) == 1)
require_set_attr = 1;
else if (string_to_baud(argv[k]) != (speed_t) - 1) {
set_speed(both_speeds, argv[k], &mode);
speed_was_set = 1;
require_set_attr = 1;
} else
error_msg_and_die("invalid argument `%s'", argv[k]);
}
}
if (require_set_attr) {
struct termios new_mode;
if (tcsetattr(fd, TCSADRAIN, &mode))
perror_msg_and_die("%s", device_name);
/* POSIX (according to Zlotnick's book) tcsetattr returns zero if
it performs *any* of the requested operations. This means it
can report `success' when it has actually failed to perform
some proper subset of the requested operations. To detect
this partial failure, get the current terminal attributes and
compare them to the requested ones. */
/* Initialize to all zeroes so there is no risk memcmp will report a
spurious difference in an uninitialized portion of the structure. */
memset(&new_mode, 0, sizeof(new_mode));
if (tcgetattr(fd, &new_mode))
perror_msg_and_die("%s", device_name);
/* Normally, one shouldn't use memcmp to compare structures that
may have `holes' containing uninitialized data, but we have been
careful to initialize the storage of these two variables to all
zeroes. One might think it more efficient simply to compare the
modified fields, but that would require enumerating those fields --
and not all systems have the same fields in this structure. */
if (memcmp(&mode, &new_mode, sizeof(mode)) != 0) {
#ifdef CIBAUD
/* SunOS 4.1.3 (at least) has the problem that after this sequence,
tcgetattr (&m1); tcsetattr (&m1); tcgetattr (&m2);
sometimes (m1 != m2). The only difference is in the four bits
of the c_cflag field corresponding to the baud rate. To save
Sun users a little confusion, don't report an error if this
happens. But suppress the error only if we haven't tried to
set the baud rate explicitly -- otherwise we'd never give an
error for a true failure to set the baud rate. */
new_mode.c_cflag &= (~CIBAUD);
if (speed_was_set || memcmp(&mode, &new_mode, sizeof(mode)) != 0)
#endif
error_msg_and_die ("%s: unable to perform all requested operations",
device_name);
}
}
return EXIT_SUCCESS;
}
