static void eapol_sm_cb(struct eapol_sm *eapol, int success, void *ctx)
{
struct eapol_test_data *e = ctx;
printf("eapol_sm_cb: success=%d\n", success);
e->eapol_test_num_reauths--;
if (e->eapol_test_num_reauths < 0)
eloop_terminate();
else {
eapol_test_compare_pmk(e);
eloop_register_timeout(0, 100000, eapol_sm_reauth, e, NULL);
}
}
static void eapol_sm_cb(struct eapol_sm *eapol, enum eapol_supp_result result,
void *ctx)
{
struct eapol_test_data *e = ctx;
printf("eapol_sm_cb: result=%d\n", result);
e->eapol_test_num_reauths--;
if (e->eapol_test_num_reauths < 0)
eloop_terminate();
else {
eapol_test_compare_pmk(e);
eloop_register_timeout(0, 100000, eapol_sm_reauth, e, NULL);
}
}
static void eapol_sm_cb(struct eapol_sm *eapol, int success, void *ctx)
{
struct wpa_supplicant *wpa_s = ctx;
printf("eapol_sm_cb: success=%d\n", success);
eapol_test_num_reauths--;
if (eapol_test_num_reauths < 0)
eloop_terminate();
else {
eapol_test_compare_pmk(wpa_s);
eloop_register_timeout(0, 100000, eapol_sm_reauth,
wpa_s, NULL);
}
}
int main(int argc, char *argv[])
{
struct wpa_supplicant wpa_s;
int c, ret = 1, wait_for_monitor = 0, save_config = 0;
char *as_addr = "127.0.0.1";
int as_port = 1812;
char *as_secret = "radius";
char *cli_addr = NULL;
char *conf = NULL;
int timeout = 30;
char *pos;
struct extra_radius_attr *p = NULL, *p1;
if (os_program_init())
return -1;
hostapd_logger_register_cb(hostapd_logger_cb);
os_memset(&eapol_test, 0, sizeof(eapol_test));
eapol_test.connect_info = "CONNECT 11Mbps 802.11b";
os_memcpy(eapol_test.own_addr, "\x02\x00\x00\x00\x00\x01", ETH_ALEN);
wpa_debug_level = 0;
wpa_debug_show_keys = 1;
for (;;) {
c = getopt(argc, argv, "a:A:c:C:M:nN:o:p:r:s:St:W");
if (c < 0)
break;
switch (c) {
case 'a':
as_addr = optarg;
break;
case 'A':
cli_addr = optarg;
break;
case 'c':
conf = optarg;
break;
case 'C':
eapol_test.connect_info = optarg;
break;
case 'M':
if (hwaddr_aton(optarg, eapol_test.own_addr)) {
usage();
return -1;
}
break;
case 'n':
eapol_test.no_mppe_keys++;
break;
case 'o':
if (eapol_test.server_cert_file)
fclose(eapol_test.server_cert_file);
eapol_test.server_cert_file = fopen(optarg, "w");
if (eapol_test.server_cert_file == NULL) {
printf("Could not open '%s' for writing\n",
optarg);
return -1;
}
break;
case 'p':
as_port = atoi(optarg);
break;
case 'r':
eapol_test.eapol_test_num_reauths = atoi(optarg);
break;
case 's':
as_secret = optarg;
break;
case 'S':
save_config++;
break;
case 't':
timeout = atoi(optarg);
break;
case 'W':
wait_for_monitor++;
break;
case 'N':
p1 = os_zalloc(sizeof(p1));
if (p1 == NULL)
break;
if (!p)
eapol_test.extra_attrs = p1;
else
p->next = p1;
p = p1;
p->type = atoi(optarg);
pos = os_strchr(optarg, ':');
if (pos == NULL) {
p->syntax = 'n';
p->data = NULL;
break;
}
pos++;
if (pos[0] == '\0' || pos[1] != ':') {
printf("Incorrect format of attribute "
"specification\n");
break;
}
p->syntax = pos[0];
p->data = pos + 2;
break;
default:
usage();
return -1;
}
}
if (argc > optind && os_strcmp(argv[optind], "scard") == 0) {
return scard_test();
}
if (argc > optind && os_strcmp(argv[optind], "sim") == 0) {
return scard_get_triplets(argc - optind - 1,
&argv[optind + 1]);
}
if (conf == NULL) {
usage();
printf("Configuration file is required.\n");
return -1;
}
if (eap_register_methods()) {
wpa_printf(MSG_ERROR, "Failed to register EAP methods");
return -1;
}
if (eloop_init()) {
wpa_printf(MSG_ERROR, "Failed to initialize event loop");
return -1;
}
os_memset(&wpa_s, 0, sizeof(wpa_s));
eapol_test.wpa_s = &wpa_s;
wpa_s.conf = wpa_config_read(conf);
if (wpa_s.conf == NULL) {
printf("Failed to parse configuration file '%s'.\n", conf);
return -1;
}
if (wpa_s.conf->ssid == NULL) {
printf("No networks defined.\n");
return -1;
}
wpa_init_conf(&eapol_test, &wpa_s, as_addr, as_port, as_secret,
cli_addr);
wpa_s.ctrl_iface = wpa_supplicant_ctrl_iface_init(&wpa_s);
if (wpa_s.ctrl_iface == NULL) {
printf("Failed to initialize control interface '%s'.\n"
"You may have another eapol_test process already "
"running or the file was\n"
"left by an unclean termination of eapol_test in "
"which case you will need\n"
"to manually remove this file before starting "
"eapol_test again.\n",
wpa_s.conf->ctrl_interface);
return -1;
}
if (wpa_supplicant_scard_init(&wpa_s, wpa_s.conf->ssid))
return -1;
if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid))
return -1;
if (wait_for_monitor)
wpa_supplicant_ctrl_iface_wait(wpa_s.ctrl_iface);
eloop_register_timeout(timeout, 0, eapol_test_timeout, &eapol_test,
NULL);
eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL);
eloop_register_signal_terminate(eapol_test_terminate, &wpa_s);
eloop_register_signal_reconfig(eapol_test_terminate, &wpa_s);
eloop_run();
eloop_cancel_timeout(eapol_test_timeout, &eapol_test, NULL);
eloop_cancel_timeout(eapol_sm_reauth, &eapol_test, NULL);
if (eapol_test_compare_pmk(&eapol_test) == 0 ||
eapol_test.no_mppe_keys)
ret = 0;
if (eapol_test.auth_timed_out)
ret = -2;
if (eapol_test.radius_access_reject_received)
ret = -3;
if (save_config)
wpa_config_write(conf, wpa_s.conf);
test_eapol_clean(&eapol_test, &wpa_s);
eap_peer_unregister_methods();
#ifdef CONFIG_AP
eap_server_unregister_methods();
#endif /* CONFIG_AP */
eloop_destroy();
if (eapol_test.server_cert_file)
fclose(eapol_test.server_cert_file);
printf("MPPE keys OK: %d mismatch: %d\n",
eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch);
if (eapol_test.num_mppe_mismatch)
ret = -4;
if (ret)
printf("FAILURE\n");
else
printf("SUCCESS\n");
os_program_deinit();
return ret;
}
int main(int argc, char *argv[])
{
struct wpa_supplicant wpa_s;
int c, ret = 1, wait_for_monitor = 0, save_config = 0;
char *as_addr = "127.0.0.1";
int as_port = 1812;
char *as_secret = "radius";
char *conf = NULL;
int timeout = 30;
if (os_program_init())
return -1;
os_memset(&eapol_test, 0, sizeof(eapol_test));
eapol_test.connect_info = "CONNECT 11Mbps 802.11b";
os_memcpy(eapol_test.own_addr, "\x02\x00\x00\x00\x00\x01", ETH_ALEN);
wpa_debug_level = 0;
wpa_debug_show_keys = 1;
for (;;) {
c = getopt(argc, argv, "a:c:C:M:np:r:s:St:W");
if (c < 0)
break;
switch (c) {
case 'a':
as_addr = optarg;
break;
case 'c':
conf = optarg;
break;
case 'C':
eapol_test.connect_info = optarg;
break;
case 'M':
if (hwaddr_aton(optarg, eapol_test.own_addr)) {
usage();
return -1;
}
break;
case 'n':
eapol_test.no_mppe_keys++;
break;
case 'p':
as_port = atoi(optarg);
break;
case 'r':
eapol_test.eapol_test_num_reauths = atoi(optarg);
break;
case 's':
as_secret = optarg;
break;
case 'S':
save_config++;
break;
case 't':
timeout = atoi(optarg);
break;
case 'W':
wait_for_monitor++;
break;
default:
usage();
return -1;
}
}
if (argc > optind && os_strcmp(argv[optind], "scard") == 0) {
return scard_test();
}
if (argc > optind && os_strcmp(argv[optind], "sim") == 0) {
return scard_get_triplets(argc - optind - 1,
&argv[optind + 1]);
}
if (conf == NULL) {
usage();
printf("Configuration file is required.\n");
return -1;
}
if (eap_peer_register_methods()) {
wpa_printf(MSG_ERROR, "Failed to register EAP methods");
return -1;
}
if (eloop_init(&wpa_s)) {
wpa_printf(MSG_ERROR, "Failed to initialize event loop");
return -1;
}
os_memset(&wpa_s, 0, sizeof(wpa_s));
eapol_test.wpa_s = &wpa_s;
wpa_s.conf = wpa_config_read(conf);
if (wpa_s.conf == NULL) {
printf("Failed to parse configuration file '%s'.\n", conf);
return -1;
}
if (wpa_s.conf->ssid == NULL) {
printf("No networks defined.\n");
return -1;
}
wpa_init_conf(&eapol_test, &wpa_s, as_addr, as_port, as_secret);
wpa_s.ctrl_iface = wpa_supplicant_ctrl_iface_init(&wpa_s);
if (wpa_s.ctrl_iface == NULL) {
printf("Failed to initialize control interface '%s'.\n"
"You may have another eapol_test process already "
"running or the file was\n"
"left by an unclean termination of eapol_test in "
"which case you will need\n"
"to manually remove this file before starting "
"eapol_test again.\n",
wpa_s.conf->ctrl_interface);
return -1;
}
if (wpa_supplicant_scard_init(&wpa_s, wpa_s.conf->ssid))
return -1;
if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid))
return -1;
if (wait_for_monitor)
wpa_supplicant_ctrl_iface_wait(wpa_s.ctrl_iface);
eloop_register_timeout(timeout, 0, eapol_test_timeout, &eapol_test,
NULL);
eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL);
eloop_register_signal_terminate(eapol_test_terminate, NULL);
eloop_register_signal_reconfig(eapol_test_terminate, NULL);
eloop_run();
if (eapol_test_compare_pmk(&eapol_test) == 0 ||
eapol_test.no_mppe_keys)
ret = 0;
if (eapol_test.auth_timed_out)
ret = -2;
if (eapol_test.radius_access_reject_received)
ret = -3;
if (save_config)
wpa_config_write(conf, wpa_s.conf);
test_eapol_clean(&eapol_test, &wpa_s);
eap_peer_unregister_methods();
eloop_destroy();
printf("MPPE keys OK: %d mismatch: %d\n",
eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch);
if (eapol_test.num_mppe_mismatch)
ret = -4;
if (ret)
printf("FAILURE\n");
else
printf("SUCCESS\n");
os_program_deinit();
return ret;
}
CSCM_EXPORT int eap_supplicant_authenticate (
u8 *MSK_buffer,
size_t MSK_buffer_len,
int wimax_mode,
int generate_eap_request_identity)
{
int ret = EAP_SUPPLICANT_STARTED;
wpa_printf(MSG_DEBUG, "Entering eap_supplicant_authenticate\n");
// Initialize EAPOL sm and other structures
if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid))
return EAP_SUPPLICANT_TEST_EAPOL_FAILED;
wpa_printf(MSG_DEBUG, "After test_eapol\n");
#ifdef UNUSED_CODE
if (wait_for_monitor)
wpa_supplicant_ctrl_iface_wait(&wpa_s);
#endif
p_eapol_test->radius_access_accept_received = 0;
// Set up for authentication
eloop_clear_terminate();
eloop_register_timeout(eapol_test.authentication_timeout_sec, 0,
eapol_test_timeout, &eapol_test, NULL);
if (generate_eap_request_identity)
eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL);
eloop_register_signal(SIGINT, eapol_test_terminate, NULL);
eloop_register_signal(SIGTERM, eapol_test_terminate, NULL);
#ifndef CONFIG_NATIVE_WINDOWS
eloop_register_signal(SIGHUP, eapol_test_terminate, NULL);
#endif /* CONFIG_NATIVE_WINDOWS */
wpa_printf(MSG_DEBUG, "After eloop setup calls\n");
ieee802_1x_rx_is_ready = 1;
eloop_run(wimax_mode);
ieee802_1x_rx_is_ready = 0;
wpa_printf(MSG_DEBUG, "After eloop_run\n");
memset(MSK_buffer, 0, MSK_buffer_len);
if (eapol_test.auth_timed_out)
ret = EAP_SUPPLICANT_TIMED_OUT;
else if (eapol_test.radius_access_reject_received)
ret = EAP_SUPPLICANT_RADIUS_ACCESS_REJECT_RECEIVED;
else if (wimax_mode) {
ret = eapol_sm_get_key(eapol_test.wpa_s->eapol, MSK_buffer, MSK_buffer_len);
wpa_printf(MSG_DEBUG, "eapol_sm_get_key returned %d\n", ret);
if (ret)
ret = EAP_SUPPLICANT_SM_GET_KEY_FAILED;
else
ret = EAP_SUPPLICANT_SUCCESS;
}
else {
if (eapol_test_compare_pmk(&eapol_test) == 0 &&
eapol_sm_get_key(eapol_test.wpa_s->eapol, MSK_buffer, MSK_buffer_len) == 0)
ret = EAP_SUPPLICANT_SUCCESS;
else
ret = EAP_SUPPLICANT_SM_GET_KEY_FAILED;
}
if (ret == EAP_SUPPLICANT_SUCCESS)
{
wpa_printf(MSG_DEBUG, "MSK before reordering");
wpa_hexdump(MSG_DEBUG, "MSK[ 0-15] = ", MSK_buffer + 0, 16);
wpa_hexdump(MSG_DEBUG, "MSK[16-31] = ", MSK_buffer + 16, 16);
wpa_hexdump(MSG_DEBUG, "MSK[31-47] = ", MSK_buffer + 32, 16);
wpa_hexdump(MSG_DEBUG, "MSK[48-63] = ", MSK_buffer + 48, 16);
wpa_printf(MSG_DEBUG, "MSK len = %d\n", MSK_buffer_len);
}
if (!wimax_mode) {
wpa_printf(MSG_ERROR, "MPPE keys OK: %d mismatch: %d\n",
eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch);
if (ret == EAP_SUPPLICANT_SUCCESS && eapol_test.num_mppe_mismatch)
ret = EAP_SUPPLICANT_NUM_MPPE_MISMATCH;
}
if (ret)
wpa_printf(MSG_ERROR, "FAILURE (ret code = %d)\n", ret);
else
wpa_printf(MSG_ERROR, "SUCCESS\n");
return ret;
}
int main(int argc, char *argv[])
{
struct wpa_supplicant wpa_s;
int c, ret = 1, wait_for_monitor = 0, save_config = 0;
char *as_addr = "127.0.0.1";
int as_port = 1812;
char *as_secret = "radius";
char *conf = NULL;
#ifdef CONFIG_NATIVE_WINDOWS
WSADATA wsaData;
if (WSAStartup(MAKEWORD(2, 0), &wsaData)) {
printf("Could not find a usable WinSock.dll\n");
return -1;
}
#endif /* CONFIG_NATIVE_WINDOWS */
memset(&eapol_test, 0, sizeof(eapol_test));
wpa_debug_level = 0;
wpa_debug_show_keys = 1;
for (;;) {
c = getopt(argc, argv, "a:c:np:r:s:SW");
if (c < 0)
break;
switch (c) {
case 'a':
as_addr = optarg;
break;
case 'c':
conf = optarg;
break;
case 'n':
eapol_test.no_mppe_keys++;
break;
case 'p':
as_port = atoi(optarg);
break;
case 'r':
eapol_test.eapol_test_num_reauths = atoi(optarg);
break;
case 's':
as_secret = optarg;
break;
case 'S':
save_config++;
break;
case 'W':
wait_for_monitor++;
break;
default:
usage();
return -1;
}
}
if (argc > optind && strcmp(argv[optind], "scard") == 0) {
return scard_test();
}
if (argc > optind && strcmp(argv[optind], "sim") == 0) {
return scard_get_triplets(argc - optind - 1,
&argv[optind + 1]);
}
if (conf == NULL) {
usage();
printf("Configuration file is required.\n");
return -1;
}
eloop_init(&wpa_s);
memset(&wpa_s, 0, sizeof(wpa_s));
eapol_test.wpa_s = &wpa_s;
wpa_s.conf = wpa_config_read(conf);
if (wpa_s.conf == NULL) {
printf("Failed to parse configuration file '%s'.\n", conf);
return -1;
}
if (wpa_s.conf->ssid == NULL) {
printf("No networks defined.\n");
return -1;
}
wpa_init_conf(&eapol_test, &wpa_s, as_addr, as_port, as_secret);
if (wpa_supplicant_ctrl_iface_init(&wpa_s)) {
printf("Failed to initialize control interface '%s'.\n"
"You may have another eapol_test process already "
"running or the file was\n"
"left by an unclean termination of eapol_test in "
"which case you will need\n"
"to manually remove this file before starting "
"eapol_test again.\n",
wpa_s.conf->ctrl_interface);
return -1;
}
if (wpa_supplicant_scard_init(&wpa_s, wpa_s.conf->ssid))
return -1;
if (test_eapol(&eapol_test, &wpa_s, wpa_s.conf->ssid))
return -1;
if (wait_for_monitor)
wpa_supplicant_ctrl_iface_wait(&wpa_s);
eloop_register_timeout(30, 0, eapol_test_timeout, &eapol_test, NULL);
eloop_register_timeout(0, 0, send_eap_request_identity, &wpa_s, NULL);
eloop_register_signal(SIGINT, eapol_test_terminate, NULL);
eloop_register_signal(SIGTERM, eapol_test_terminate, NULL);
#ifndef CONFIG_NATIVE_WINDOWS
eloop_register_signal(SIGHUP, eapol_test_terminate, NULL);
#endif /* CONFIG_NATIVE_WINDOWS */
eloop_run();
if (eapol_test_compare_pmk(&eapol_test) == 0)
ret = 0;
if (eapol_test.auth_timed_out)
ret = -2;
if (eapol_test.radius_access_reject_received)
ret = -3;
if (save_config)
wpa_config_write(conf, wpa_s.conf);
test_eapol_clean(&eapol_test, &wpa_s);
eloop_destroy();
printf("MPPE keys OK: %d mismatch: %d\n",
eapol_test.num_mppe_ok, eapol_test.num_mppe_mismatch);
if (eapol_test.num_mppe_mismatch)
ret = -4;
if (ret)
printf("FAILURE\n");
else
printf("SUCCESS\n");
#ifdef CONFIG_NATIVE_WINDOWS
WSACleanup();
#endif /* CONFIG_NATIVE_WINDOWS */
return ret;
}