// Runs constantly in the background, in a loop.
void matrix_scan_user(void)
{
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case FMU:
ergodox_right_led_1_on();
break;
case PMQ:
ergodox_right_led_2_on();
break;
case PMN:
ergodox_right_led_3_on();
break;
default:
if(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) {
ergodox_led_all_set(LED_BRIGHTNESS_HI);
ergodox_right_led_1_on();
}
else {
ergodox_board_led_off();
}
break;
}
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
ergodox_board_led_off();
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
ergodox_board_led_off();
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
ergodox_board_led_off();
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
#ifdef CFQ_USE_EXPEREMENTAL_LAYER
case 3:
ergodox_right_led_3_on();
break;
#endif
default:
// none
break;
}
};
void matrix_scan_keymap(void) { // runs frequently to update info
uint8_t modifiders = get_mods();
if (!skip_leds) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// Since we're not using the LEDs here for layer indication anymore,
// then lets use them for modifier indicators. Shame we don't have 4...
// Also, no "else", since we want to know each, independantly.
if (modifiders & MODS_SHIFT_MASK) {
ergodox_right_led_2_on();
}
if (modifiders & MODS_CTRL_MASK) {
ergodox_right_led_1_on();
}
if (modifiders & MODS_ALT_MASK) {
ergodox_right_led_3_on();
}
}
};
void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) {
if (!skip_leds) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
skip_leds = true;
}
switch (state->count) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_3_on();
break;
case 4:
ergodox_right_led_1_off();
_delay_ms(50);
ergodox_right_led_2_off();
_delay_ms(50);
ergodox_right_led_3_off();
}
}
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case NUMBER:
case SYMBOL:
case BRACKETS:
//case SHELL_LAYER:
ergodox_right_led_2_on();
break;
case KEY_NAV:
case KEY_SEL:
ergodox_right_led_3_on();
break;
case SHORTCUTS:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
default:
// none
break;
}
return;
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
ergodox_right_led_3_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
default:
// none
break;
}
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
// if capslk is on, set led 1 on
ergodox_right_led_1_on();
} else {
ergodox_right_led_1_off();
}
};
// Runs constantly in the background, in a loop.
void * matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_3_on();
break;
case 4:
ergodox_right_led_1_on(); // TODO: Make a fourth layer
ergodox_right_led_3_on();
break;
default:
// none
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
/* leds is a static array holding the current brightness of each of the
* three keyboard LEDs. It's 4 long simply to avoid the ugliness of +1s and
* -1s in the code below, and because wasting a byte really doesn't matter
* that much (no, it *doesn't*, stop whinging!). Note that because it's
* static it'll maintain state across invocations of this routine.
*/
static uint8_t leds[4];
uint8_t led;
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
/* Loop over each LED/layer */
for (led = 1; led <= 3; ++led) {
/* If the current layer matches the current LED, increment its
* brightness by 1 up to a maximum of 255. If the current layer doesn't
* match, decrement its brightness by 1 down to a minimum of zero.
*/
leds[led] += (layer == led) ?
(leds[led] < 255 ? 1 : 0):
(leds[led] > 0 ? -1 : 0);
/* Set LED state according to the new brightness */
if (leds[led]) {
ergodox_right_led_on(led);
ergodox_right_led_set(led, leds[led]);
}
else {
ergodox_right_led_off(led);
}
}
};
void matrix_scan_keymap(void) { // runs frequently to update info
uint8_t modifiers = get_mods();
uint8_t led_usb_state = host_keyboard_leds();
uint8_t one_shot = get_oneshot_mods();
if (!skip_leds) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// Since we're not using the LEDs here for layer indication anymore,
// then lets use them for modifier indicators. Shame we don't have 4...
// Also, no "else", since we want to know each, independently.
if ( ( modifiers | one_shot ) & MOD_MASK_SHIFT || led_usb_state & (1<<USB_LED_CAPS_LOCK) ) {
ergodox_right_led_2_on();
ergodox_right_led_2_set( 50 );
}
if ( ( modifiers | one_shot ) & MOD_MASK_CTRL) {
ergodox_right_led_1_on();
ergodox_right_led_1_set( 10 );
}
if ( ( modifiers | one_shot ) & MOD_MASK_ALT) {
ergodox_right_led_3_on();
ergodox_right_led_3_set( 10 );
}
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case DVORAK:
ergodox_right_led_1_on();
break;
case COLEMAK:
ergodox_right_led_2_on();
break;
case QWERTY:
ergodox_right_led_3_on();
break;
case FN:
ergodox_led_all_on();
break;
default:
// none
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
static uint8_t state;
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
//reduce LED on time to 1/6th because LEDs are too strong
if (++state < 6) return;
state = 0;
//bit 1: default layer 1 - QWERTY
if (default_layer_state & (1UL << 1)) ergodox_right_led_1_on();
uint8_t layer = biton32(layer_state);
//layer 2 : Symbols (& Fs)
//if (layer == 2) ergodox_right_led_2_on();
//layer 3 : F-lock
if (layer == 3) ergodox_right_led_2_on();
//layer 4 : Num-lock
if (layer == 4) ergodox_right_led_3_on();
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_3_on();
break;
case 4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
break;
default:
// none
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (td_led_override) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// Layer 1 and 2 are both overlay layers, so they could both be on. This
// means we can't use the lazy check of checking for the first significant
// bit.
if (LAYER_ON(SYMB)) {
ergodox_right_led_1_on();
}
if (LAYER_ON(NUMP)) {
ergodox_right_led_2_on();
}
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case 1:
ergodox_right_led_3_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
default:
// none
break;
}
// Turn the caps lock led on
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
ergodox_right_led_1_on();
}
}
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_on();
ergodox_led_all_on();
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// _delay_ms(45);
switch (layer)
{
case _SYMBOLS:
ergodox_right_led_1_on();
break;
case _MOUSE:
ergodox_right_led_2_on();
break;
case _NUMPAD:
ergodox_right_led_3_on();
break;
case _NAV:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
break;
case _MACROS:
//layer unused right now
break;
case _FUNCTION:
//layer unused right nowex
break;
case _APPSWITCH:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
case _ONESHOT:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
case _TEXTNAV:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
break;
case _QWERTY_KIDS:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
case _STREET_FIGHTER:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
default:
break;
}
};
// Runs just one time when the keyboard initializes.
void matrix_init_user(void) {
// AFAICT, we don't have one of these
ergodox_board_led_off();
#ifdef MOUSEKEY_ENABLE
// mousekey: A bit faster by default, use accel keys for fine control
mk_max_speed = 6;
// Slightly slower mouse wheel speed than the default
mk_wheel_max_speed = 4;
#endif
}
// Runs constantly in the background, in a loop.
void * matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case SYMB:
ergodox_right_led_1_on();
break;
case MDIA:
ergodox_right_led_2_on();
break;
default:
ergodox_board_led_off();
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case 1:
ergodox_right_led_1_on();
/* ergodox_left_led_1_on(); */
break;
case 2:
ergodox_right_led_2_on();
/* ergodox_left_led_2_on(); */
break;
case 3:
ergodox_right_led_3_on();
/* ergodox_left_led_3_on(); */
break;
case 4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
/* ergodox_left_led_1_on(); */
/* ergodox_left_led_2_on(); */
break;
case 5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
/* ergodox_left_led_1_on(); */
/* ergodox_left_led_3_on(); */
break;
case 6:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
/* ergodox_left_led_2_on(); */
/* ergodox_left_led_3_on(); */
break;
case 7:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
/* ergodox_left_led_1_on(); */
/* ergodox_left_led_2_on(); */
/* ergodox_left_led_3_on(); */
break;
default:
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
case L1:
ergodox_right_led_1_on();
break;
case L2:
ergodox_right_led_2_on();
break;
case L3:
ergodox_right_led_3_on();
break;
case L4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
break;
case L5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
break;
// case L6:
// ergodox_right_led_2_on();
// ergodox_right_led_3_on();
// break;
// case L7:
// ergodox_right_led_1_on();
// ergodox_right_led_2_on();
// ergodox_right_led_3_on();
// break;
default:
ergodox_board_led_off();
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint32_t layer0 = layer_state & (1UL << 0),
layer1 = layer_state & (1UL << 1),
layer2 = layer_state & (1UL << 2),
layer3 = layer_state & (1UL << 3);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
if (layer1) ergodox_right_led_1_on();
if (layer2) ergodox_right_led_2_on();
if (layer3) ergodox_right_led_3_on();
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
switch (layer) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// none
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// led 1: numeric layer
if (layer_state & (1 << NUMR)) {
ergodox_right_led_1_on();
}
// led 2: Dvorak layer
if (default_layer_state == 1 << DVRK) {
ergodox_right_led_2_on();
}
// led 3: caps lock
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
ergodox_right_led_3_on();
}
};
/**
* Runs constantly in the background, in a loop.
*/
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_led_lower_off();
ergodox_led_raise_off();
ergodox_led_adjust_off();
switch (layer) {
case _LOWER:
ergodox_led_lower_on();
break;
case _RAISE:
ergodox_led_raise_on();
break;
case _ADJUST:
ergodox_led_adjust_on();
break;
}
};
// Runs constantly in the background, in a loop.
void matrix_scan_user(void) {
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
switch (layer) {
// TODO: Make this relevant to the ErgoDox EZ.
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
default:
// none
break;
}
LEADER_DICTIONARY() {
leading = false;
leader_end();
SEQ_ONE_KEY(KC_W) {
register_code(KC_LALT);
register_code(KC_F4);
unregister_code(KC_F4);
unregister_code(KC_LALT);
}
SEQ_ONE_KEY(KC_O) {
register_code(KC_LCTL);
register_code(KC_LSFT);
register_code(KC_O);
unregister_code(KC_O);
unregister_code(KC_LSFT);
unregister_code(KC_LCTL);
}
}
}
void matrix_scan_user(void) { // runs frequently to update info
uint8_t modifiders = get_mods();
uint8_t layer = biton32(layer_state);
static bool has_layer_changed = true;
if (!skip_leds) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
// Since we're not using the LEDs here for layer indication anymore,
// then lets use them for modifier indicators. Shame we don't have 4...
// Also, no "else", since we want to know each, independantly.
if ( modifiders & MODS_SHIFT_MASK) {
ergodox_right_led_2_on();
}
if ( modifiders & MODS_CTRL_MASK) {
ergodox_right_led_1_on();
}
if ( modifiders & MODS_ALT_MASK) {
ergodox_right_led_3_on();
}
}
if (layer != current_layer) {
has_layer_changed = true;
current_layer = layer;
}
// Check layer, and apply color if its changed since last check
if (has_layer_changed) {
uint8_t default_layer = 0;
default_layer = eeconfig_read_default_layer();
switch (layer) {
case SYMB:
rgblight_set_blue;
rgblight_mode(2);
break;
case OVERWATCH:
rgblight_set_orange;
rgblight_mode(17);
break;
case DIABLO:
rgblight_set_red;
rgblight_mode(5);
break;
case MOUS:
rgblight_set_urine;
rgblight_mode(1);
break;
case 7:
rgblight_sethsv (255,255,255);
rgblight_mode(1);
break;
default:
if (default_layer & (1UL << COLEMAK)) {
rgblight_set_green;
}
else if (default_layer & (1UL << DVORAK)) {
rgblight_set_magenta;
}
else if (default_layer & (1UL << WORKMAN)) {
rgblight_set_purple;
}
else {
rgblight_set_teal;
}
rgblight_mode(1);
break;
}
has_layer_changed = false;
}
// Run Diablo 3 macro checking code.
run_diablo_macro_check();
#ifdef LEADER_KEYS
LEADER_DICTIONARY() {
leading = false;
leader_end();
SEQ_ONE_KEY(KC_C) {
SEND_STRING("Covecube");
}
SEQ_TWO_KEYS(KC_S, KC_D) {
SEND_STRING("StableBit DrivePool");
}
SEQ_TWO_KEYS(KC_C, KC_D) {
SEND_STRING("StableBit CloudDrive");
}
void matrix_scan_user(void) {
uint8_t new_layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
#ifdef LAYER_UNDERGLOW_LIGHTING
static uint8_t old_layer = 0;
uint8_t modifiders = get_mods();
if ( modifiders & MODS_SHIFT_MASK) {
ergodox_right_led_1_on();
}
if ( modifiders & MODS_CTRL_MASK) {
ergodox_right_led_2_on();
}
if ( modifiders & MODS_ALT_MASK) {
ergodox_right_led_3_on();
}
if (old_layer != new_layer) {
has_layer_changed = true;
old_layer = new_layer;
}
if (has_layer_changed) {
switch (new_layer) {
case 1:
rgblight_set_red;
break;
case 2:
rgblight_set_blue;
break;
case 3:
rgblight_set_green;
break;
case 4:
rgblight_set_yellow;
break;
case 5:
rgblight_setrgb(0xFF, 0xFF, 0x00);
break;
case 6:
rgblight_setrgb(0xFF, 0xFF, 0x00);
break;
case 7:
rgblight_setrgb(0xFF, 0xFF, 0xFF);
break;
default:
rgblight_set_teal;
break;
}
has_layer_changed = false;
}
#else
switch (new_layer) {
case 1:
ergodox_right_led_1_on();
break;
case 2:
ergodox_right_led_2_on();
break;
case 3:
ergodox_right_led_3_on();
break;
case 4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
break;
case 5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
break;
case 6:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
case 7:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
break;
default:
break;
}
#endif
};
uint8_t matrix_scan(void)
{
if (mcp23018_status) { // if there was an error
if (++mcp23018_reset_loop == 0) {
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
// this will be approx bit more frequent than once per second
print("trying to reset mcp23018\n");
mcp23018_status = init_mcp23018();
if (mcp23018_status) {
print("left side not responding\n");
} else {
print("left side attached\n");
ergodox_blink_all_leds();
}
}
}
#ifdef DEBUG_MATRIX_FREQ
matrix_scan_count++;
uint32_t timer_now = timer_read32();
if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
print("matrix scan frequency: ");
pdec(matrix_scan_count);
print("\n");
matrix_timer = timer_now;
matrix_scan_count = 0;
}
#endif
#ifdef KEYMAP_CUB
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
ergodox_left_led_1_off();
ergodox_left_led_2_off();
ergodox_left_led_3_off();
switch (layer) {
case 1:
// all
ergodox_left_led_1_on();
ergodox_left_led_2_on();
ergodox_left_led_3_on();
break;
case 2:
// blue
ergodox_left_led_2_on();
break;
case 8:
// blue and green
ergodox_left_led_2_on();
// break missed intentionally
case 3:
// green
ergodox_left_led_3_on();
break;
case 6:
ergodox_board_led_on();
// break missed intentionally
case 4:
case 5:
case 7:
// red
ergodox_left_led_1_on();
break;
default:
// none
break;
}
mcp23018_status = ergodox_left_leds_update();
#endif
#ifdef KEYMAP_SIMON
uint8_t layer = biton32(layer_state);
ergodox_board_led_off();
switch (layer) {
case 0:
// none
break;
default:
ergodox_board_led_on();
break;
}
#endif
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
select_row(i);
matrix_row_t cols = read_cols(i);
if (matrix_debouncing[i] != cols) {
matrix_debouncing[i] = cols;
if (debouncing) {
debug("bounce!: "); debug_hex(debouncing); debug("\n");
}
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
return 1;
}
// Runs whenever there is a layer state change.
uint32_t layer_state_set_user(uint32_t state) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
uint8_t layer = biton32(state);
switch (layer) {
case 0:
#ifdef RGBLIGHT_COLOR_LAYER_0
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_0);
#else
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#endif
break;
case 1:
ergodox_right_led_1_on();
#ifdef RGBLIGHT_COLOR_LAYER_1
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_1);
#endif
break;
case 2:
ergodox_right_led_2_on();
#ifdef RGBLIGHT_COLOR_LAYER_2
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_2);
#endif
break;
case 3:
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_3
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_3);
#endif
break;
case 4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
#ifdef RGBLIGHT_COLOR_LAYER_4
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_4);
#endif
break;
case 5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_5
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_5);
#endif
break;
case 6:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_6
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_6);
#endif
break;
case 7:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_7
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_6);
#endif
break;
default:
break;
}
return state;
};
