void
dumpBblock()
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Select the entity by type
AcBrEntity* pEnt = NULL;
AcDb::SubentType subType = AcDb::kNullSubentType;
returnValue = selectEntityByType(pEnt, subType);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in selectEntityByType:");
errorReport(returnValue);
delete pEnt;
return;
}
AcGeBoundBlock3d bblock;
returnValue = pEnt->getBoundBlock(bblock);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrEntity::getBoundBlock:");
errorReport(returnValue);
delete pEnt;
return;
}
delete pEnt;
AcGePoint3d min, max;
bblock.getMinMaxPoints(min, max);
bblockReport(min, max);
return;
}
// 列出远方当前目录
void cmd_dir(int sockfd) {
int data_sock, bytes;
char buf[BUF_SIZE] = {0};
sendCommand(sockfd, "PASV", "");
if (getReplyCode(sockfd) != PASV_MODE) {
printf("Error!");
return;
}
server.sin_port = htons(data_port);
if ((data_sock = socket(AF_INET, SOCK_STREAM, 0)) < 0)
errorReport("Create socket error!");
if (connect(data_sock, (struct sockaddr*)&server, sizeof(server)) < 0)
errorReport("Cannot connect to server!");
printf("Data connection successfully: %s:%d\n", inet_ntoa(server.sin_addr), ntohs(server.sin_port));
sendCommand(sockfd, "LIST ", "-al");
getReplyCode(sockfd);
printf("\n");
// 数据连接获取服务器传输的数据
while ((bytes = read(data_sock, buf, BUF_SIZE - 2)) > 0) {
buf[bytes] = '\0';
printf("%s", buf);
}
printf("\n");
close(data_sock);
getReplyCode(sockfd);
}
static AcBr::ErrorStatus
countVertices(const AcBrBrep& brepEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// make a global vertex traverser
AcBrBrepVertexTraverser brepVertexTrav;
returnValue = brepVertexTrav.setBrep(brepEntity);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrBrepVertexTraverser::setBrep:"));
errorReport(returnValue);
return returnValue;
}
// count the vertices
int vertexCount = 0;
while (!brepVertexTrav.done() && (returnValue == AcBr::eOk)) {
vertexCount++;
returnValue = brepVertexTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrBrepVertexTraverser::next:"));
errorReport(returnValue);
return returnValue;
}
}
acutPrintf(ACRX_T("\n ***Brep has %d vertices\n"), vertexCount);
return returnValue;
}
AcBr::ErrorStatus
nodeDump(const AcBrNode& node)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Determine the entity which contains this node
AcBrEntity* entityAssociated = NULL;
returnValue = node.getEntityAssociated(entityAssociated);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrNode::getEntityAssociated:");
errorReport(returnValue);
delete entityAssociated;
return returnValue;
}
entityAssociatedReport(entityAssociated);
delete entityAssociated;
AcGePoint3d nodePoint;
returnValue = node.getPoint(nodePoint);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrNode::getPoint:");
errorReport(returnValue);
return returnValue;
}
acutPrintf("\n Node Point is (");
acutPrintf ("%lf, ", nodePoint.x);
acutPrintf ("%lf, ", nodePoint.y);
acutPrintf ("%lf", nodePoint.z);
acutPrintf(")\n");
return returnValue;
}
static AcBr::ErrorStatus
countShells(const AcBrBrep& brepEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// make a global shell traverser
AcBrBrepShellTraverser brepShellTrav;
returnValue = brepShellTrav.setBrep(brepEntity);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrBrepShellTraverser::setBrep:"));
errorReport(returnValue);
return returnValue;
}
// count the shells
int shellCount = 0;
while (!brepShellTrav.done() && (returnValue == AcBr::eOk)) {
shellCount++;
returnValue = brepShellTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrBrepShellTraverser::next:"));
errorReport(returnValue);
return returnValue;
}
}
acutPrintf(ACRX_T("\n ***Brep has %d shells\n"), shellCount);
return returnValue;
}
void customFree(void* data, char* file, int caller_line){
if(!initialized){
errorReport(file,caller_line, HEAP_FREE_NOT_ALLOCATED, data);
}else{
// tracking node
MemEntryPtr temp = head;
while ( temp!=NULL){
char* offset = ((char*) temp) +ENTRY_SIZE;
if( offset < (char*) data && (char*) data < offset + temp->size){
// MEMORY IS FREED WHERE IT IS NOT ALLOCATED
errorReport(file,caller_line,HEAP_FREE_MIDDLE,data);
return;
}else if(offset == (char*) data){
if(temp->isFree==true){
// MEMORY WAS FREED - REDUNDANTLY FREE THE MEMORY
errorReport(file,caller_line,HEAP_FREE_REDUNDANT,data);
fprintf(stderr,"\tDid you free it at line %d in %s ?\n",temp->lineFree,temp->fileFree);
return;
}else{
// FREE THE MEMORY
temp->isFree = true;
temp->fileFree = file;
temp->lineFree = caller_line;
// Merge it with previous free chunked
if(temp->prev!=NULL && temp->prev->isFree){
//Expand the available size of the previous node
temp->prev->size+=(temp->size+ENTRY_SIZE) ;
// Reassign the node's pointers
if(temp->next!=NULL)
temp->next->prev= temp->prev;
temp->prev->next = temp->next;
//Make the tracking node the previous node
temp=temp->prev;
}
if(temp->next!=NULL && temp->next->isFree){
temp->size += temp->next->size + ENTRY_SIZE;
temp->next = temp->next->next;
if(temp->next!=NULL){
temp->next->prev = temp;
}
}
break;
}
}else{
// Get to the next memory entry
temp = temp->next;
}
}
// Get to the end of the memory array
if(temp==NULL)
errorReport(file,caller_line,HEAP_FREE_NOT_ALLOCATED,data);
}
}
void
dumpModel()
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Select the entity by type
AcBrEntity* pEnt = NULL;
AcDb::SubentType subType = AcDb::kNullSubentType;
returnValue = selectEntityByType(pEnt, subType);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in selectEntityByType:"));
errorReport(returnValue);
delete pEnt;
return;
}
switch (subType) {
case AcDb::kNullSubentType:
// brep
returnValue = brepDump((const AcBrBrep&)(*pEnt));
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in brepDump:"));
errorReport(returnValue);
return;
}
break;
case AcDb::kFaceSubentType:
// face
returnValue = faceDump((const AcBrFace&)(*pEnt));
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in faceDump:"));
errorReport(returnValue);
return;
}
break;
case AcDb::kEdgeSubentType:
// edge
returnValue = edgeDump((const AcBrEdge&)(*pEnt));
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in edgeDump:"));
errorReport(returnValue);
return;
}
break;
default:
acutPrintf(ACRX_T("\n dumpModel: unsupported subentity type: %d\n"), subType);
return;
}
delete pEnt;
return;
}
// 下载服务器的一个文件
void cmd_get(int sockfd, char* cmd) {
int i = 0, data_sock, bytes;
char filename[BUF_SIZE], buf[BUF_SIZE];
while (i < strlen(cmd) && cmd[i] != ' ') i++;
if (i == strlen(cmd)) {
printf("Command error: %s\n", cmd);
return;
}
while (i < strlen(cmd) && cmd[i] == ' ') i++;
if (i == strlen(cmd)) {
printf("Command error: %s\n", cmd);
return;
}
strncpy(filename, cmd+i, strlen(cmd+i)+1);
sendCommand(sockfd, "TYPE ", "I");
getReplyCode(sockfd);
sendCommand(sockfd, "PASV", "");
if (getReplyCode(sockfd) != PASV_MODE) {
printf("Error!\n");
return;
}
server.sin_port = htons(data_port);
if ((data_sock = socket(AF_INET, SOCK_STREAM, 0)) < 0)
errorReport("Create socket error!");
if (connect(data_sock, (struct sockaddr*)&server, sizeof(server)) < 0)
errorReport("Cannot connect to server!");
printf("Data connection successfully: %s:%d\n", inet_ntoa(server.sin_addr), ntohs(server.sin_port));
sendCommand(sockfd, "RETR ", filename);
if (getReplyCode(sockfd) == NO_SUCH_FILE) {
close(sockfd);
return;
}
FILE* dst_file;
if ((dst_file = fopen(filename, "wb")) == NULL) {
printf("Error!");
close(sockfd);
return;
}
while ((bytes = read(data_sock, buf, BUF_SIZE)) > 0)
fwrite(buf, 1, bytes, dst_file);
close(data_sock);
getReplyCode(sockfd);
fclose(dst_file);
}
// Utility function to extract a useful, bounded curve with native
// curve definition data, from the external (bounded) curve
AcBr::ErrorStatus
getNativeCurve(const AcBrEdge& edgeEntity,
AcGeCurve3d*& curveGeometry,
AcGeCurve3d*& nativeGeometry)
{
AcBr::ErrorStatus returnValue = edgeEntity.getCurve(curveGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrEdge::getCurve:");
errorReport(returnValue);
return returnValue;
}
if (curveGeometry == NULL) {
acutPrintf("\n getNativeCurve: external 3d curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (curveGeometry->type() != kExternalCurve3d) {
acutPrintf("\n getNativeCurve: curve is not an external 3d curve\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve3d*)curveGeometry)->isDefined()) {
acutPrintf("\n getNativeCurve: external 3d curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve3d*)curveGeometry)->isNativeCurve(nativeGeometry)
|| (nativeGeometry == NULL)) {
acutPrintf("\n getNativeCurve: native 3d curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
return returnValue;
}
// Utility function to extract a useful 2d nurb curve with native
// definition data, from the external paramcurve
AcBr::ErrorStatus
getNativeParamCurve(const AcBrLoopEdgeTraverser& loopEdge,
AcGeCurve2d*& pcurveGeometry,
AcGeNurbCurve2d& nurbGeometry)
{
AcBr::ErrorStatus returnValue = loopEdge.getParamCurve(pcurveGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrLoopEdgeTraverser::getParamCurve:");
errorReport(returnValue);
return returnValue;
}
if (pcurveGeometry == NULL) {
acutPrintf("\n getNativeParamCurve: external param curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (pcurveGeometry->type() != kExternalCurve2d) {
acutPrintf("\n getNativeParamCurve: parameter curve is not an external 2d curve\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve2d*)pcurveGeometry)->isDefined()) {
acutPrintf("\n getNativeParamCurve: external param curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve2d*)pcurveGeometry)->isNurbCurve(nurbGeometry)) {
acutPrintf("\n getNativeParamCurve: native 2d nurb curve is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
return returnValue;
}
// Utility function to extract a useful, bounded and oriented curve
// with native curve definition data, from the external (bounded) curve
AcBr::ErrorStatus
getNativeOrientedCurve(const AcBrLoopEdgeTraverser& loopEdge,
AcGeCurve3d*& curveGeometry,
AcGeCurve3d*& nativeGeometry)
{
AcBr::ErrorStatus returnValue = loopEdge.getOrientedCurve(curveGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrLoopEdgeTraverser::getOrientedCurve:"));
errorReport(returnValue);
return returnValue;
}
if (curveGeometry == NULL) {
acutPrintf(ACRX_T("\n getNativeOrientedCurve: external 3d curve is undefined\n"));
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (curveGeometry->type() != kExternalCurve3d) {
acutPrintf(ACRX_T("\n getNativeOrientedCurve: curve is not an external 3d curve\n"));
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve3d*)curveGeometry)->isDefined()) {
acutPrintf(ACRX_T("\n getNativeOrientedCurve: external 3d curve is undefined\n"));
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!((AcGeExternalCurve3d*)curveGeometry)->isNativeCurve(nativeGeometry)
|| (nativeGeometry == NULL)) {
acutPrintf(ACRX_T("\n getNativeOrientedCurve: native 3d curve is undefined\n"));
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
return returnValue;
}
/* main
*
* do some main stuff.
*/
int main( int argc, char ** argv )
{
basic_program * bp;
basic_line * bl;
printf( "0\n" );
/* set up our program space */
bp = newProgram();
if( !bp ) {
errorReport( kErrorMalloc, 1 );
return 0;
}
/* display version info */
cmd_info( bp, NULL );
bl = consumeString( bp, program[0] );
bl = consumeString( bp, program[1] );
bl = consumeString( bp, program[2] );
bl = consumeString( bp, program[3] );
bl = consumeString( bp, program[4] );
/* and run the program, if we should... */
printf( "Running program\n" );
runProgram( bp, 0 );
while( run_poll( bp ) );
/* just show access of variables */
printf( "Variable 'a' is %ld\n", getVariableNumber( bp->variables, "a" ));
deleteProgram( bp );
return 0;
}
int main(int argc, char **argv)
{
CTexture *image1 = NULL;
CTexture *image2 = NULL;
if(argc != 3)
{
printUsage();
}
else
{
image1 = loadImage(argv[1]);
image2 = loadImage(argv[2]);
}
CMetricRMS rms;
CTexture *diff = rms.Analyze(image1, image2);
CTextureManager::WriteTextureToPNG("diff.png", diff);
std::fstream errorReport("error.txt", std::ios_base::out);
errorReport << "ErrorR = " << rms.GetErrorR() << std::endl;
errorReport << "ErrorG = " << rms.GetErrorG() << std::endl;
errorReport << "ErrorB = " << rms.GetErrorB() << std::endl;
errorReport << "Error = " << rms.GetError() << std::endl;
errorReport.close();
return 0;
}
// 发送命令，参数为 socket号 、 命令标示 和 命令参数
void sendCommand(int sock_fd, const char* cmd, const char* info) {
char buf[BUF_SIZE] = {0};
strcpy(buf, cmd);
strcat(buf, info);
strcat(buf, "\r\n");
if (send(sock_fd, buf, strlen(buf), 0) < 0)
errorReport("Send command error!");
}
// 连接到服务器，参数为 IP地址 和 端口号，返回是否连接成功的编号
int connectToHost(char* ip, char* pt) {
int sockfd;
int port = atoi(pt);
if (port <= 0 || port >= 65536)
errorReport("Invalid Port Number!");
server.sin_family = AF_INET;
server.sin_port = htons(port);
if ((server.sin_addr.s_addr = inet_addr(ip)) < 0) {
if ((hent = gethostbyname(ip)) != 0)
memcpy(&server.sin_addr, hent->h_addr, sizeof(&(server.sin_addr)));
else
errorReport("Invalid Host!");
}
if ((sockfd = socket(AF_INET, SOCK_STREAM, 0)) < 0)
errorReport("Create Socket Error!");
if (connect(sockfd, (struct sockaddr*)&server, sizeof(server)) < 0)
errorReport("Cannot connect to server!");
printf("Successfully connect to server: %s:%d\n", inet_ntoa(server.sin_addr), ntohs(server.sin_port));
return sockfd;
}
void GLESv1_GraphManager::endScene()
{
if(!eglSwapBuffers(mDisplay, mSurface))
{
Pegas_log_warning("GraphicsService::update:");
Pegas_log_warning("!eglSwapBuffers");
Pegas_log_warning("mDisplay = %d [%X]", mDisplay, mDisplay);
Pegas_log_warning("mSurface = %d [%X]", mSurface, mSurface);
errorReport("eglSwapBuffers");
destroy();
}
}
void
pointContainment()
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Select the entity by type
AcBrEntity* pEnt = NULL;
AcDb::SubentType subType = AcDb::kNullSubentType;
returnValue = selectEntityByType(pEnt, subType);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in selectEntityByType:"));
errorReport(returnValue);
delete pEnt;
return;
}
// Query the point by AutoCAD pick
AcGePoint3d testPt;
acedGetPoint(NULL, ACRX_T("\n Pick point for containment test: \n"), asDblArray(testPt));
AcGe::PointContainment containment = AcGe::kOutside;
AcBrEntity* container = NULL;
returnValue = pEnt->getPointContainment(testPt, containment, container);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrEntity::getPointContainment:"));
errorReport(returnValue);
delete pEnt;
return;
}
ptContainmentReport(containment, container);
delete container;
delete pEnt;
return;
}
AcBr::ErrorStatus
nodeDisplay(const AcBrNode& node, AcGePoint3dArray& pts)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
AcGePoint3d nodePoint;
returnValue = node.getPoint(nodePoint);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrNode::getPoint:");
errorReport(returnValue);
return returnValue;
}
pts.append((const AcGePoint3d&)nodePoint);
return returnValue;
}
ClientConnection::ClientConnection(QObject *parent) :
QObject(parent)
{
tcpSocket = new QTcpSocket(this);
/*Get info from the config file*/
QSettings *config = new QSettings("../Common/config.ini",QSettings::IniFormat);
config->setIniCodec("UTF8");
config->beginGroup("information");
QString ip=config->value("HostAddress").toString();
int portNumber = config->value("portNumber").toInt();
ipAddress = QHostAddress(ip);
port = portNumber;
config->endGroup();
connect(tcpSocket,SIGNAL(error(QAbstractSocket::SocketError)),this,SLOT(errorReport()));
}
void
trimSurface()
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
Acad::ErrorStatus acadReturnValue = eOk;
// Get the subentity path for a face
AcDbFullSubentPath subPath(kNullSubent);
acadReturnValue = selectEntity(AcDb::kFaceSubentType, subPath);
if (acadReturnValue != eOk) {
acutPrintf(ACRX_T("\n Error in getPath: %d"), acadReturnValue);
return;
}
// Make a face entity to access the surface
AcBrFace faceEntity;
returnValue = faceEntity.set(subPath);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrFace::set:"));
errorReport(returnValue);
return;
}
// Query the style for trimmed surface dump
Adesk::Boolean trimmed = Adesk::kTrue;
ACHAR opt[128];
while (Adesk::kTrue) {
acutPrintf(ACRX_T("\nSelect Style for Trimmed Surface Dump: "));
acedInitGet(NULL, ACRX_T("Nurb Trimmed"));
if (acedGetKword(ACRX_T("Nurb/<Trimmed>: "), opt) == RTCAN) return;
// Map the user input to a valid dump style
if ((_tcscmp(opt, ACRX_T("Trimmed")) == 0) || (_tcscmp(opt, ACRX_T("")) == 0)) {
trimmed = Adesk::kTrue;
break;
} else if ((_tcscmp(opt, ACRX_T("Nurb")) == 0)) {
trimmed = Adesk::kFalse;
break;
}
}
(trimmed) ? faceToTrimmedSurface(faceEntity) : faceToNurbSurface(faceEntity);
return;
}
INT WINAPI WinMain(HINSTANCE, HINSTANCE, PSTR, INT) {
Q_INIT_RESOURCE(CrashReporter);
QApplication app(__argc, __argv);
#else
int main(int argc, char **argv) {
Q_INIT_RESOURCE(CrashReporter);
QApplication app(argc, argv);
#endif
Logger::initialize();
LogWarning << "Arx Crash Reporter starting!";
QString sharedMemoryName;
const QStringList args = app.arguments();
QStringList::const_iterator itArgs;
for (itArgs = args.constBegin(); itArgs != args.constEnd(); ++itArgs) {
if((*itArgs).startsWith("-crashinfo=")) {
QString crashInfo = (*itArgs);
crashInfo.remove("-crashinfo=");
sharedMemoryName = crashInfo;
}
}
if(sharedMemoryName.isEmpty()) {
LogError << "Missing -crashinfo parameter!";
return EXIT_FAILURE;
}
ErrorReport errorReport(sharedMemoryName);
ErrorReportDialog errorReportDlg(errorReport);
errorReportDlg.show();
return app.exec();
}
AcBr::ErrorStatus
brepDump(const AcBrBrep& brepEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Validate the brep vs. the brep "owner"
AcBrBrep brepOwner;
returnValue = brepEntity.getBrep(brepOwner);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrBrep::getBrep:");
errorReport(returnValue);
return returnValue;
}
if (!brepEntity.isEqualTo(&brepOwner)) {
acutPrintf("\n Brep owner is out of sync with brep!");
return (AcBr::ErrorStatus)Acad::eAmbiguousOutput;
}
// Query traversal direction for brep dump
Adesk::Boolean downwards = Adesk::kTrue;
char opt[128];
while (Adesk::kTrue) {
acutPrintf("\nSelect Traversal Direction for Brep Dump: ");
acedInitGet(NULL, "Upwards Downwards");
if (acedGetKword("Upwards/<Downwards>: ", opt) == RTCAN)
return returnValue;
// Map the user input to a valid traversal direction
if ((strcmp(opt, "Downwards") == 0) || (strcmp(opt, "") == 0)) {
downwards = Adesk::kTrue;
break;
} else if ((strcmp(opt, "Upwards") == 0)) {
downwards = Adesk::kFalse;
break;
}
}
// Switchable dump based on upwards vs. downwards traversal
if (downwards) brepDumpDown(brepEntity);
else brepDumpUp(brepEntity);
return returnValue;
}
void* customMalloc(unsigned size, char* file, int caller_line){
if(!initialized){
// Initialize the head
head = (MemEntryPtr) mem;
head->prev = NULL;
head->next = NULL;
head->isFree = true;
head->fileFree = NULL;
head->lineFree = 0;
head->size = HEAP_SIZE - ENTRY_SIZE;
initialized = true;
}
MemEntryPtr temp = head;
// While the tracking node is non NULL
while(temp!=NULL){
// the node is freed
if( temp->isFree && temp->size >= size + ENTRY_SIZE ){
// If find a big-enough chunk and is not freed
MemEntryPtr newEntry = (MemEntryPtr) ( ((char*)temp) + ENTRY_SIZE + size);
//Change the node's pointers
newEntry->prev = temp;
newEntry->next = temp->next;
temp->next = newEntry;
if(newEntry->next!=NULL){
newEntry->next->prev = newEntry;
}
newEntry->isFree = true;
//Tweak the current available size of the entry
newEntry->size = temp->size - size - ENTRY_SIZE;
temp->isFree = false;
temp->size = size;
return (void*) ((char*) temp)+ENTRY_SIZE;
}
temp = temp->next;
}
// No space to filled in
errorReport(file,caller_line, HEAP_MALLOC_INSUFFICIENT, 0);
return NULL;
}
// 运行客户端
void run(char* ip, char* pt) {
int sockfd = connectToHost(ip, pt);
if (getReplyCode(sockfd) != SERVICE_READY)
errorReport("Service Connect Error!");
while (userLogin(sockfd) != 0) // 调用登录函数userLogin
printf("Please try again.\n");
int isQuit = 0;
char buf[BUF_SIZE];
while (!isQuit) {
printf("[Client command] ");
fgets(buf, sizeof(buf), stdin);
switch (cmdToNum(buf)) {
case GET:
cmd_get(sockfd, buf);
break;
case PUT:
cmd_put(sockfd, buf);
break;
case PWD:
cmd_pwd(sockfd);
break;
case DIR:
cmd_dir(sockfd);
break;
case CD:
cmd_cd(sockfd, buf);
break;
case HELP:
cmd_help();
break;
case QUIT:
cmd_quit(sockfd);
isQuit = 1;
break;
default:
cmd_help();
break;
}
}
close(sockfd);
}
// Utility function to extract a useful, unbounded surface with native
// surface definition data, from the external bounded surface
AcBr::ErrorStatus
getNativeSurface(const AcBrFace& faceEntity,
AcGeSurface*& surfaceGeometry,
AcGeSurface*& nativeGeometry)
{
AcBr::ErrorStatus returnValue = faceEntity.getSurface(surfaceGeometry);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrFace::getSurface:");
errorReport(returnValue);
return returnValue;
}
if (surfaceGeometry == NULL) {
acutPrintf("\n getNativeSurface: external bounded surface is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (surfaceGeometry->type() != kExternalBoundedSurface) {
acutPrintf("\n getNativeSurface: surface is not an external bounded surface\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
AcGeExternalSurface baseGeometry;
((AcGeExternalBoundedSurface*)surfaceGeometry)->getBaseSurface(baseGeometry);
if (!baseGeometry.isDefined()) {
acutPrintf("\n getNativeSurface: external surface is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
if (!baseGeometry.isNativeSurface(nativeGeometry)
|| (nativeGeometry == NULL)) {
acutPrintf("\n getNativeSurface: native surface is undefined\n");
returnValue = AcBr::eMissingGeometry;
return returnValue;
}
return returnValue;
}
int main(int argc,char *argv[]){
#ifdef _DEBUG_ //调试时启用内存泄露检测工具
printf("DEBUG !!!!!!!!!!!!!!!!!!!!!!!\n\n\n");
atexit(report_mem_leak); //
#endif //
//UI start
//-------------------------------------------------------------------
//初始化-------------------------------------------------------------
//-------------------------------------------------------------------
//1.将发送的命令转换成正确的格式
asciiToHex(UPS_COMMUNICATION_INI,UPS_COMMUNICATION_INI_DECODE);
asciiToHex(UPS_CMD_ACCEPT,UPS_CMD_ACCEPT_DECODE);
asciiToHex(UPS_CMD_01,UPS_CMD_01_DECODE);
asciiToHex(UPS_CMD_02,UPS_CMD_02_DECODE);
asciiToHex(UPS_CMD_03,UPS_CMD_03_DECODE);
asciiToHex(UPS_CMD_06,UPS_CMD_06_DECODE);
asciiToHex(UPS_CMD_07,UPS_CMD_07_DECODE);
asciiToHex(UPS_CMD_24,UPS_CMD_24_DECODE);
asciiToHex(UPS_CMD_27,UPS_CMD_27_DECODE);
asciiToHex(UPS_CMD_31,UPS_CMD_31_DECODE);
asciiToHex(UPS_CMD_32,UPS_CMD_32_DECODE);
asciiToHex(UPS_CMD_3B,UPS_CMD_3B_DECODE);
asciiToHex(UPS_CMD_42,UPS_CMD_42_DECODE);
//UI show "ok"
//2.读取配置文件参数
char *value_buf = (char*) malloc(MAX_CHAR_PER_PARA); //临时变量
char *key_buf = (char*) malloc(MAX_CHAR_PER_CONF); //临时变量
KEY_VAL config_file, *config_file_ptr1=&config_file, *config_file_ptr2=NULL;
if(analyzeConfFile("config",&config_file)){
//read file successfully
}
else{
//file not existed
}
errorReport(); //
for(int i=0;i<NUM_OF_UPS;i++){ //读取配置文件参数的设定值
sprintf(key_buf,"com_num_%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].LINK_COM_NUM=atoi(value_buf);//
}
else{
}
sprintf(key_buf,"READ_INTERVAL_UPS%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].READ_INTERVAL=atoi(value_buf);//
}
else{
}
sprintf(key_buf,"READ_MULTIPLIER_UPS%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].READ_MULTIPLIER=atoi(value_buf);//
}
else{
}
sprintf(key_buf,"READ_CONSTANT_UPS%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].READ_CONSTANT=atoi(value_buf);//
}
else{
}
sprintf(key_buf,"WRITE_MULTIPLIER_UPS%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].WRITE_MULTIPLIER=atoi(value_buf);//
}
else{
}
sprintf(key_buf,"WRITE_CONSTANT_UPS%d",i+1);
if(getValue(&config_file,key_buf,value_buf)){
_2023ups[i].WRITE_CONSTANT=atoi(value_buf);//
}
else{
}
}
#ifdef _DEBUG_
printf("%d %d %d %d\n\n",_2023ups[0].LINK_COM_NUM,_2023ups[1].LINK_COM_NUM,_2023ups[2].LINK_COM_NUM,_2023ups[3].LINK_COM_NUM);
for(int i=0;i<NUM_OF_UPS;i++){
printf("%d %d %d %d %d\n",_2023ups[i].READ_INTERVAL,_2023ups[i].READ_MULTIPLIER,_2023ups[i].READ_CONSTANT,\
_2023ups[i].WRITE_MULTIPLIER,_2023ups[i].WRITE_CONSTANT);
}
#endif
free(value_buf);
free(key_buf);
while(config_file_ptr1!=NULL){
config_file_ptr2=config_file_ptr1;
config_file_ptr1=config_file_ptr1->next;
free(config_file_ptr2);
}
//3.初始化相应串口
char com[20];
for(int i=0;i<NUM_OF_UPS;i++){ //打开串口，配置相应参数
memset(com,0,20);
if(_2023ups[i].LINK_COM_NUM > 0){ // _2023ups[i].LINK_COM_NUM从配置文件读取,>0有效
_2023ups[i].UPS_SET_ACTIVE=TRUE;
//gtk_switch_set_active(itemValue[i][9],TRUE);
//_2023ups[i].UPS_ALARM_ENABLE=TRUE;
#ifdef _DEBUG_
printf("start com%d communication\n",_2023ups[i].LINK_COM_NUM);
#endif
sprintf(com,"\\\\.\\COM%d",_2023ups[i].LINK_COM_NUM);
_2023ups[i].UPS_COM_HANDLE=initialCom(com,1024);
if(_2023ups[i].UPS_COM_HANDLE == INVALID_HANDLE_VALUE){
//需要加入异常处理及日志记录
errorReport();
printf("Open Com%d Error shit\n",_2023ups[i].LINK_COM_NUM);
//
exit(0);
}
COMMTIMEOUTS timeouts={_2023ups[i].READ_INTERVAL,_2023ups[i].READ_MULTIPLIER,\
_2023ups[i].READ_CONSTANT,_2023ups[i].WRITE_MULTIPLIER,_2023ups[i].WRITE_CONSTANT};
if(setComTimeout(_2023ups[i].UPS_COM_HANDLE,timeouts))
printf("set com timeout ok\n");
//需要加入异常处理及日志记录
if(setComPara(_2023ups[i].UPS_COM_HANDLE,_24_N_8_1))
printf("set com parameter ok\n");
//需要加入异常处理及日志记录
}
else {
_2023ups[i].UPS_SET_ACTIVE=FALSE;
}
}
GtkApplication *app;
app = gtk_application_new ("org.gtk.ups_monitor_v3", G_APPLICATION_FLAGS_NONE);
int status;
g_signal_connect (app, "activate", G_CALLBACK (activate), NULL);
g_signal_connect (app, "startup", G_CALLBACK (startup), NULL);
//5.创建一个线程，用来发送接收串口数据
// #ifndef NO_DATA_THREAD
HANDLE sendDataThreadProc=CreateThread(NULL,0,sendDataViaCom,NULL,0,NULL);
printf("Start data transmision\n");
// #endif
status = g_application_run (G_APPLICATION (app), argc, argv);
g_object_unref (app);
return 0;
}
AcBr::ErrorStatus
selectEntityByType(AcBrEntity*& pEnt, AcDb::SubentType& subType)
{
Acad::ErrorStatus acadReturnValue = Acad::eOk;
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Query validation level
AcBr::ValidationLevel vlevel = validationLevel();
// Query the subentity type
subType = subtype();
// Query whether to select a database entity or create a new one
Adesk::Boolean context = (subType != AcDb::kNullSubentType)
? Adesk::kFalse : localContext();
if (!context) {
// Query the subentity by AutoCAD pick and get the subentity path
AcDbFullSubentPath subPath(kNullSubent);
acadReturnValue = selectEntity(subType, subPath);
if (acadReturnValue != Acad::eOk) {
acutPrintf(ACRX_T("\n Error in selectEntity: %d"), acadReturnValue);
return (AcBr::ErrorStatus)acadReturnValue;
}
// Call the appropriate subentity constructor
switch (subType) {
case AcDb::kNullSubentType:
pEnt = new AcBrBrep();
break;
case AcDb::kFaceSubentType:
pEnt = new AcBrFace();
break;
case AcDb::kEdgeSubentType:
pEnt = new AcBrEdge();
break;
default:
acutPrintf(ACRX_T("\n selectEntityByType: unsupported subentity type: %d\n"), subType);
returnValue = (AcBr::ErrorStatus)Acad::eWrongSubentityType;
return returnValue;
}
if (pEnt == NULL) {
acutPrintf(ACRX_T("\n selectEntityByType: unable to allocate memory\n"));
returnValue = (AcBr::ErrorStatus)Acad::eOutOfMemory;
return returnValue;
}
returnValue = pEnt->set(subPath);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrEntity::set:"));
errorReport(returnValue);
return returnValue;
}
} else {
// Create the entity as a local object
AcDbEntity* pEntity;
acadReturnValue = createEntity(pEntity);
if (acadReturnValue != Acad::eOk) {
acutPrintf(ACRX_T("\n Error in createEntity: %d"), acadReturnValue);
return (AcBr::ErrorStatus)acadReturnValue;
}
if (pEntity == NULL) {
acutPrintf(ACRX_T("\n selectEntityByType: unable to allocate memory\n"));
returnValue = (AcBr::ErrorStatus)Acad::eOutOfMemory;
return returnValue;
}
pEnt = new AcBrBrep();
if (pEnt == NULL) {
acutPrintf(ACRX_T("\n selectEntityByType: unable to allocate memory\n"));
returnValue = (AcBr::ErrorStatus)Acad::eOutOfMemory;
return returnValue;
}
returnValue = ((AcBrBrep*)pEnt)->set((const AcDbEntity&)*pEntity);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrEntity::set:"));
errorReport(returnValue);
return returnValue;
}
}
returnValue = pEnt->setValidationLevel(vlevel);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrEntity::setValidationLevel:"));
errorReport(returnValue);
return returnValue;
}
return returnValue;
}
// 显示远方当前目录
void cmd_pwd(int sockfd) {
sendCommand(sockfd, "PWD", "");
if (getReplyCode(sockfd) != PATHNAME_CREATE)
errorReport("Wrong reply for PWD!");
}
AcBr::ErrorStatus
faceDump(const AcBrFace& faceEntity)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// Verify that AcBr was explicitly and not implicitly loaded,
// by testing ObjectARX functions (which are unavailable unless
// explicitly loaded)
if (faceEntity.isA() == NULL) {
acutPrintf(ACRX_T("\n faceDump: AcBrEntity::isA() failed\n"));
return returnValue;
}
if (!faceEntity.isKindOf(AcBrFace::desc())) {
acutPrintf(ACRX_T("\n faceDump: AcBrEntity::isKindOf() failed\n"));
return returnValue;
}
AcBrEntity* entClass = (AcBrEntity*)&faceEntity;
AcBrEdge* pEdge = AcBrEdge::cast(entClass);
if (pEdge != NULL) {
acutPrintf(ACRX_T("\n faceDump: AcBrEntity::cast() failed\n"));
return (AcBrErrorStatus)Acad::eNotThatKindOfClass;
}
AcGe::EntityId entId;
returnValue = faceEntity.getSurfaceType(entId);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrFace::getSurfaceType:"));
errorReport(returnValue);
return returnValue;
}
AcGeSurface* surfaceGeometry = NULL;
AcGeSurface* nativeGeometry = NULL;
// NOTE: ignore unsupported geometry types for now, since we already know
// that elliptic cylinders and elliptic cones are rejected by AcGe, but we
// can still perform useful evaluations on the external bounded surface.
returnValue = getNativeSurface(faceEntity, surfaceGeometry, nativeGeometry);
if ((returnValue != AcBr::eOk) && (returnValue
!= (AcBrErrorStatus)Acad::eInvalidInput)) {
acutPrintf(ACRX_T("\n Error in getNativeSurface:"));
errorReport(returnValue);
delete surfaceGeometry;
delete nativeGeometry;
return returnValue;
}
switch (entId) {
case(kPlane):
{
acutPrintf(ACRX_T("\nSurface Type: Plane\n"));
AcGePlane* planeGeometry = (AcGePlane*)nativeGeometry;
AcGePoint3d pt = planeGeometry->pointOnPlane();
AcGeVector3d normal = planeGeometry->normal();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Point on Plane is ("));
acutPrintf (ACRX_T("%lf , "), pt.x);
acutPrintf (ACRX_T("%lf , "), pt.y);
acutPrintf (ACRX_T("%lf "), pt.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Plane normal direction is ("));
acutPrintf (ACRX_T("%lf , "), normal.x);
acutPrintf (ACRX_T("%lf , "), normal.y);
acutPrintf (ACRX_T("%lf "), normal.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
case(kSphere):
{
acutPrintf(ACRX_T("\nSurface Type: Sphere\n"));
AcGeSphere* sphereGeometry = (AcGeSphere*)nativeGeometry;
AcGePoint3d centre = sphereGeometry->center();
double ang1, ang2, ang3, ang4;
sphereGeometry->getAnglesInU(ang1, ang2);
sphereGeometry->getAnglesInV(ang3, ang4);
AcGePoint3d north = sphereGeometry->northPole();
AcGePoint3d south = sphereGeometry->southPole();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Sphere centre is ("));
acutPrintf (ACRX_T("%lf , "), centre.x);
acutPrintf (ACRX_T("%lf , "), centre.y);
acutPrintf (ACRX_T("%lf "), centre.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Sphere radius is %lf\n"), sphereGeometry->radius());
acutPrintf(ACRX_T(" Sphere start angle in U is %lf\n"), ang1);
acutPrintf(ACRX_T(" Sphere end angle in U is %lf\n"), ang2);
acutPrintf(ACRX_T(" Sphere start angle in V is %lf\n"), ang3);
acutPrintf(ACRX_T(" Sphere end angle in V is %lf\n"), ang4);
acutPrintf(ACRX_T(" Sphere north pole is ("));
acutPrintf (ACRX_T("%lf , "), north.x);
acutPrintf (ACRX_T("%lf , "), north.y);
acutPrintf (ACRX_T("%lf "), north.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Sphere south pole is ("));
acutPrintf (ACRX_T("%lf , "), south.x);
acutPrintf (ACRX_T("%lf , "), south.y);
acutPrintf (ACRX_T("%lf "), south.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
case(kTorus):
{
acutPrintf(ACRX_T("\nSurface Type: Torus\n"));
AcGeTorus* torusGeometry = (AcGeTorus*)nativeGeometry;
AcGePoint3d centre = torusGeometry->center();
double ang1, ang2, ang3, ang4;
torusGeometry->getAnglesInU(ang1, ang2);
torusGeometry->getAnglesInV(ang3, ang4);
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Torus centre is ("));
acutPrintf (ACRX_T("%lf , "), centre.x);
acutPrintf (ACRX_T("%lf , "), centre.y);
acutPrintf (ACRX_T("%lf "), centre.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Torus major radius is %lf\n"), torusGeometry->majorRadius());
acutPrintf(ACRX_T(" Torus minor radius is %lf\n"), torusGeometry->minorRadius());
acutPrintf(ACRX_T(" Torus start angle in U is %lf\n"), ang1);
acutPrintf(ACRX_T(" Torus end angle in U is %lf\n"), ang2);
acutPrintf(ACRX_T(" Torus start angle in V is %lf\n"), ang3);
acutPrintf(ACRX_T(" Torus end angle in V is %lf\n"), ang4);
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
case(kCylinder):
{
acutPrintf(ACRX_T("\nSurface Type: Circular Cylinder\n"));
AcGeCylinder* cylinderGeometry = (AcGeCylinder*)nativeGeometry;
AcGePoint3d origin = cylinderGeometry->origin();
double ang1, ang2;
cylinderGeometry->getAngles(ang1, ang2);
AcGeInterval ht;
cylinderGeometry->getHeight(ht);
double height = ht.upperBound() - ht.lowerBound();
AcGeVector3d refAxis = cylinderGeometry->refAxis();
AcGeVector3d symAxis = cylinderGeometry->axisOfSymmetry();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Circular Cylinder origin is ("));
acutPrintf (ACRX_T("%lf , "), origin.x);
acutPrintf (ACRX_T("%lf , "), origin.y);
acutPrintf (ACRX_T("%lf "), origin.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cylinder radius is %lf\n"), cylinderGeometry->radius());
acutPrintf(ACRX_T(" Circular Cylinder start angle is %lf\n"), ang1);
acutPrintf(ACRX_T(" Circular Cylinder end angle is %lf\n"), ang2);
if (cylinderGeometry->isClosedInU())
acutPrintf(ACRX_T(" Circular Cylinder height is %lf\n"), height);
else acutPrintf(ACRX_T(" Circular Cylinder is not closed in U\n"));
acutPrintf(ACRX_T(" Circular Cylinder reference axis is ("));
acutPrintf (ACRX_T("%lf , "), refAxis.x);
acutPrintf (ACRX_T("%lf , "), refAxis.y);
acutPrintf (ACRX_T("%lf "), refAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cylinder axis of symmetry is ("));
acutPrintf (ACRX_T("%lf , "), symAxis.x);
acutPrintf (ACRX_T("%lf , "), symAxis.y);
acutPrintf (ACRX_T("%lf "), symAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
case(kCone):
{
acutPrintf(ACRX_T("\nSurface Type: Circular Cone\n"));
AcGeCone* coneGeometry = (AcGeCone*)nativeGeometry;
AcGePoint3d centre = coneGeometry->baseCenter();
double ang1, ang2;
coneGeometry->getAngles(ang1, ang2);
AcGeVector3d axis1 = coneGeometry->axisOfSymmetry();
AcGeVector3d axis2 = coneGeometry->refAxis();
AcGePoint3d apex = coneGeometry->apex();
double cosAng, sinAng;
coneGeometry->getHalfAngle(cosAng, sinAng);
AcGeInterval ht;
coneGeometry->getHeight(ht);
double height = ht.upperBound() - ht.lowerBound();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Circular Cone base centre is ("));
acutPrintf (ACRX_T("%lf , "), centre.x);
acutPrintf (ACRX_T("%lf , "), centre.y);
acutPrintf (ACRX_T("%lf "), centre.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cone base radius is %lf\n"), coneGeometry->baseRadius());
acutPrintf(ACRX_T(" Circular Cone start angle is %lf\n"), ang1);
acutPrintf(ACRX_T(" Circular Cone end angle is %lf\n"), ang2);
acutPrintf(ACRX_T(" Circular Cone axis of symmetry is ("));
acutPrintf (ACRX_T("%lf , "), axis1.x);
acutPrintf (ACRX_T("%lf , "), axis1.y);
acutPrintf (ACRX_T("%lf "), axis1.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cone reference axis is ("));
acutPrintf (ACRX_T("%lf , "), axis2.x);
acutPrintf (ACRX_T("%lf , "), axis2.y);
acutPrintf (ACRX_T("%lf "), axis2.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cone apex is ("));
acutPrintf (ACRX_T("%lf , "), apex.x);
acutPrintf (ACRX_T("%lf , "), apex.y);
acutPrintf (ACRX_T("%lf "), apex.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Circular Cone cosine of major half-angle is %lf\n"), cosAng);
acutPrintf(ACRX_T(" Circular Cone sine of major half-angle is %lf\n"), sinAng);
if (coneGeometry->isClosedInU())
acutPrintf(ACRX_T(" Circular Cone height is %lf\n"), height);
else acutPrintf(ACRX_T(" Circular Cone is not closed in U\n"));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
case(kNurbSurface):
{
acutPrintf(ACRX_T("\nSurface Type: NURB Surface\n"));
AcGeNurbSurface* nurbGeometry = (AcGeNurbSurface*)nativeGeometry;
int nCtrlPtsU = nurbGeometry->numControlPointsInU();
int nCtrlPtsV = nurbGeometry->numControlPointsInV();
int nKnotsU = nurbGeometry->numKnotsInU();
int nKnotsV = nurbGeometry->numKnotsInV();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" NURB Surface degree in U is %d\n"), nurbGeometry->degreeInU());
acutPrintf(ACRX_T(" NURB Surface degree in V is %d\n"), nurbGeometry->degreeInV());
acutPrintf(ACRX_T(" NURB Surface number of control points in U is %d\n"), nCtrlPtsU);
acutPrintf(ACRX_T(" NURB Surface number of control points in V is %d\n"), nCtrlPtsV);
acutPrintf(ACRX_T(" NURB Surface number of knots in U is %d\n"), nKnotsU);
acutPrintf(ACRX_T(" NURB Surface number of knots in V is %d\n"), nKnotsV);
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
// NOTE: This surface is not yet supported in AcGe, so we infer the definition
// data by analysing evaluated data on the external bounded surface.
case(kEllipCylinder):
{
acutPrintf(ACRX_T("\nSurface Type: Elliptic Cylinder\n"));
AcGePoint3d p0 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, 0.0));
AcGePoint3d p1 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, kPi));
AcGePoint3d p2 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, kHalfPi));
AcGePoint3d origin(((p0.x + p1.x) / 2.0),
((p0.y + p1.y) / 2.0),
((p0.z + p1.z) / 2.0));
AcGeVector3d majAxis = p0 - origin;
AcGeVector3d minAxis = p2 - origin;
AcGeVector3d symAxis = (majAxis.crossProduct(minAxis)).normalize();
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Elliptic Cylinder origin is ("));
acutPrintf (ACRX_T("%lf , "), origin.x);
acutPrintf (ACRX_T("%lf , "), origin.y);
acutPrintf (ACRX_T("%lf "), origin.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cylinder major radius is %lf\n"), majAxis.length());
acutPrintf(ACRX_T(" Elliptic Cylinder minor radius is %lf\n"), minAxis.length());
acutPrintf(ACRX_T(" Elliptic Cylinder major axis is ("));
acutPrintf (ACRX_T("%lf , "), majAxis.x);
acutPrintf (ACRX_T("%lf , "), majAxis.y);
acutPrintf (ACRX_T("%lf "), majAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cylinder minor axis is ("));
acutPrintf (ACRX_T("%lf , "), minAxis.x);
acutPrintf (ACRX_T("%lf , "), minAxis.y);
acutPrintf (ACRX_T("%lf "), minAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cylinder axis of symmetry is ("));
acutPrintf (ACRX_T("%lf , "), symAxis.x);
acutPrintf (ACRX_T("%lf , "), symAxis.y);
acutPrintf (ACRX_T("%lf "), symAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
// NOTE: This surface is not yet supported in AcGe, so we infer the definition
// data by analysing evaluated data on the external bounded surface.
case(kEllipCone):
{
acutPrintf(ACRX_T("\nSurface Type: Elliptic Cone\n"));
AcGePoint3d p0 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, 0.0));
AcGePoint3d p1 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, kPi));
AcGePoint3d p2 = surfaceGeometry->evalPoint(AcGePoint2d(0.0, kHalfPi));
AcGePoint3d p3 = surfaceGeometry->evalPoint(AcGePoint2d(1.0, 0.0));
AcGePoint3d centre(((p0.x + p1.x) / 2.0),
((p0.y + p1.y) / 2.0),
((p0.z + p1.z) / 2.0));
AcGeVector3d majAxis = p0 - centre;
AcGeVector3d minAxis = p2 - centre;
AcGeVector3d symAxis = (majAxis.crossProduct(minAxis)).normalize();
double halfAng = kHalfPi - majAxis.angleTo(p3 - p0);
acutPrintf(ACRX_T("\nSurface Definition Data Begin:\n"));
acutPrintf(ACRX_T(" Elliptic Cone base centre is ("));
acutPrintf (ACRX_T("%lf , "), centre.x);
acutPrintf (ACRX_T("%lf , "), centre.y);
acutPrintf (ACRX_T("%lf "), centre.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cone base major radius is %lf\n"), majAxis.length());
acutPrintf(ACRX_T(" Elliptic Cone base minor radius is %lf\n"), minAxis.length());
acutPrintf(ACRX_T(" Elliptic Cone major axis is ("));
acutPrintf (ACRX_T("%lf , "), majAxis.x);
acutPrintf (ACRX_T("%lf , "), majAxis.y);
acutPrintf (ACRX_T("%lf "), majAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cone minor axis is ("));
acutPrintf (ACRX_T("%lf , "), minAxis.x);
acutPrintf (ACRX_T("%lf , "), minAxis.y);
acutPrintf (ACRX_T("%lf "), minAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cone axis of symmetry is ("));
acutPrintf (ACRX_T("%lf , "), symAxis.x);
acutPrintf (ACRX_T("%lf , "), symAxis.y);
acutPrintf (ACRX_T("%lf "), symAxis.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Elliptic Cone cosine of major half-angle is %lf\n"), cos(halfAng));
acutPrintf(ACRX_T(" Elliptic Cone sine of major half-angle is %lf\n"), sin(halfAng));
acutPrintf(ACRX_T("Surface Definition Data End\n"));
break;
}
default:
acutPrintf(ACRX_T("\nSurface Type: Unexpected Non Surface\n"));
return (AcBrErrorStatus)Acad::eInvalidInput;
} // end switch(entId)
delete nativeGeometry;
// Evaluate the surface - note that the u,v bounds will not consider any
// holes in the surface. To compute a u,v zone of exclusion for evaluation,
// check for additional (i.e., inner) loops and get the bounding boxes for
// the loops, then convert those to parameter space boxes. There is no
// particular guarantee that outer loop(s) are the first in the face-loop
// list, however, and we currently have no way to query a loop to find out
// which type it is. Still, the maximal u,v parameter range will be useful
// for most surfaces and most evaluation purposes.
AcGeInterval uParam;
AcGeInterval vParam;
((AcGeExternalBoundedSurface*)surfaceGeometry)->getEnvelope(uParam, vParam);
// Make sure the u,v values are legal and the envelope is bounded
if ((uParam.isBounded()) && (vParam.isBounded())) {
AcGePoint2d midRange;
midRange.x = uParam.lowerBound() + (uParam.length() / 2.0);
midRange.y = vParam.lowerBound() + (vParam.length() / 2.0);
AcGePoint3d pointOnSurface =
((AcGeExternalBoundedSurface*)surfaceGeometry)->evalPoint(midRange);
acutPrintf(ACRX_T("\nSurface Evaluation Begin:\n"));
acutPrintf(ACRX_T(" Parameter space bounds are (("));
acutPrintf(ACRX_T("%lf, "), uParam.lowerBound());
acutPrintf(ACRX_T("%lf "), uParam.upperBound());
acutPrintf(ACRX_T("), (\n"));
acutPrintf(ACRX_T("%lf, "), vParam.lowerBound());
acutPrintf(ACRX_T("%lf "), vParam.upperBound());
acutPrintf(ACRX_T("))\n"));
acutPrintf(ACRX_T(" Parameter space mid-range is ("));
acutPrintf(ACRX_T(" %lf, "), midRange.x);
acutPrintf(ACRX_T("%lf "), midRange.y);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T(" Point on surface is ("));
acutPrintf (ACRX_T("%lf , "), pointOnSurface.x);
acutPrintf (ACRX_T("%lf , "), pointOnSurface.y);
acutPrintf (ACRX_T("%lf "), pointOnSurface.z);
acutPrintf(ACRX_T(")\n"));
acutPrintf(ACRX_T("Surface Evaluation End\n"));
}
delete surfaceGeometry;
Adesk::Boolean oriented;
returnValue = faceEntity.getOrientToSurface(oriented);
if (returnValue != AcBr::eOk) {
acutPrintf(ACRX_T("\n Error in AcBrFace::getOrientToSurface:"));
errorReport(returnValue);
return returnValue;
}
oriented ? acutPrintf(ACRX_T("\nSurface Orientation is Positive\n"))
: acutPrintf(ACRX_T("\nSurface Orientation is Negative\n"));
return returnValue;
}
AcBr::ErrorStatus
meshDump(const AcBrMesh2d& mesh)
{
AcBr::ErrorStatus returnValue = AcBr::eOk;
// make a global element traverser
AcBrMesh2dElement2dTraverser meshElemTrav;
returnValue = meshElemTrav.setMesh(mesh);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrMesh2dElement2dTraverser::setMesh:");
errorReport(returnValue);
return returnValue;
}
// count the elements
int elemCount = 0;
while (!meshElemTrav.done() && (returnValue == AcBr::eOk) && !acedUsrBrk()) {
elemCount++;
acutPrintf("\n ***Element No: %d \n", elemCount);
AcBrElement2d currentElem;
returnValue = meshElemTrav.getElement(currentElem);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrMesh2dElement2dTraverser::getElement:");
errorReport(returnValue);
return returnValue;
}
AcGeVector3d normal;
returnValue = currentElem.getNormal(normal);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2d::getNormal:");
errorReport(returnValue);
return returnValue;
}
acutPrintf("\n Element Normal is (");
acutPrintf ("%lf, ", normal.x);
acutPrintf ("%lf, ", normal.y);
acutPrintf ("%lf", normal.z);
acutPrintf(")\n");
// Determine the entity which contains this element
AcBrEntity* entityAssociated = NULL;
returnValue = currentElem.getEntityAssociated(entityAssociated);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2d::getEntityAssociated:");
errorReport(returnValue);
delete entityAssociated;
return returnValue;
}
entityAssociatedReport(entityAssociated);
delete entityAssociated;
// count the nodes
int nodeCount = 0;
AcBrElement2dNodeTraverser elemNodeTrav;
returnValue = elemNodeTrav.setElement(meshElemTrav);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2dNodeTraverser::setElement:");
errorReport(returnValue);
return returnValue;
}
while (!elemNodeTrav.done() && (returnValue == AcBr::eOk)) {
nodeCount++;
AcBrNode node;
returnValue = elemNodeTrav.getNode(node);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2dNodeTraverser::getNode:");
errorReport(returnValue);
return returnValue;
}
// dump the node geometry data
returnValue = nodeDump(node);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in nodeDump:");
errorReport(returnValue);
return returnValue;
}
// dump the node surface data
AcGePoint2d point;
returnValue = elemNodeTrav.getParamPoint(point);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2dNodeTraverser::getParamPoint:");
errorReport(returnValue);
return returnValue;
}
acutPrintf("\n Node Param Point is (");
acutPrintf ("%lf, ", point.x);
acutPrintf ("%lf, ", point.y);
acutPrintf(")\n");
AcGeVector3d normal;
returnValue = elemNodeTrav.getSurfaceNormal(normal);
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2dNodeTraverser::getSurfaceNormal:");
errorReport(returnValue);
return returnValue;
}
acutPrintf("\n Node Surface Normal is (");
acutPrintf ("%lf, ", normal.x);
acutPrintf ("%lf, ", normal.y);
acutPrintf ("%lf", normal.z);
acutPrintf(")\n");
returnValue = elemNodeTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrElement2dNodeTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end element while
acutPrintf("\n ****Element No. %d has %d nodes\n", elemCount, nodeCount);
returnValue = meshElemTrav.next();
if (returnValue != AcBr::eOk) {
acutPrintf("\n Error in AcBrMesh2dElement2dTraverser::next:");
errorReport(returnValue);
return returnValue;
}
} // end mesh while
acutPrintf("\n ***Mesh has %d elements\n", elemCount);
return returnValue;
}
