void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
int spridr = immr->sysconf.spridr;
/*
* delete crypto node if not on an E-processor
* initial revisions of the MPC834xE/6xE have the original SEC 2.0.
* EA revisions got the SEC uprevved to 2.4 but since the default device
* tree contains SEC 2.0 properties we uprev them here.
*/
if (!IS_E_PROCESSOR(spridr))
fdt_fixup_crypto_node(blob, 0);
else if (IS_E_PROCESSOR(spridr) &&
(SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
REVID_MAJOR(spridr) >= 2)
fdt_fixup_crypto_node(blob, 0x0204);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"timebase-frequency", (bd->bi_busfreq / 4), 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", gd->core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"clock-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"clock-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_BOOTCOUNT_LIMIT)
fdt_fixup_muram (blob);
#endif
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr = gur_in32(&gur->svr);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
if (fdt_fixup_kaslr(blob))
fdt_fixup_remove_jr(blob);
#endif
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
CONFIG_SYS_CLK_FREQ, 1);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
#ifdef CONFIG_FSL_ESDHC
fdt_fixup_esdhc(blob, bd);
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
#endif
#ifndef CONFIG_ARCH_LS1012A
fsl_fdt_disable_usb(blob);
#endif
#ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN
fdt_fixup_gic(blob);
#endif
#ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI
fdt_fixup_msi(blob);
#endif
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FSL_LSCH2
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr = in_be32(&gur->svr);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
#endif
#ifdef CONFIG_MP
ft_fixup_cpu(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
do_fixup_by_compat_u32(blob, "fixed-clock",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
#ifdef CONFIG_FSL_ESDHC
fdt_fixup_esdhc(blob, bd);
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
fdt_fixup_fman_firmware(blob);
#endif
fsl_fdt_disable_usb(blob);
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
int off;
int val;
const char *sysclk_path;
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int svr;
svr = in_be32(&gur->svr);
unsigned long busclk = get_bus_freq(0);
/* delete crypto node if not on an E-processor */
if (!IS_E_PROCESSOR(svr))
fdt_fixup_crypto_node(blob, 0);
#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
else {
ccsr_sec_t __iomem *sec;
sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
}
#endif
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
while (off != -FDT_ERR_NOTFOUND) {
val = gd->cpu_clk;
fdt_setprop(blob, off, "clock-frequency", &val, 4);
off = fdt_node_offset_by_prop_value(blob, off,
"device_type", "cpu", 4);
}
do_fixup_by_prop_u32(blob, "device_type", "soc",
4, "bus-frequency", busclk, 1);
ft_fixup_enet_phy_connect_type(blob);
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
sysclk_path = fdt_get_alias(blob, "sysclk");
if (sysclk_path)
do_fixup_by_path_u32(blob, sysclk_path, "clock-frequency",
CONFIG_SYS_CLK_FREQ, 1);
do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
#define UBOOT_HEAD_LEN 0x1000
/*
* Reserved memory in SD boot deep sleep case.
* Second stage uboot binary and malloc space should be reserved.
* If the memory they occupied has not been reserved, then this
* space would be used by kernel and overwritten in uboot when
* deep sleep resume, which cause deep sleep failed.
* Since second uboot binary has a head, that space need to be
* reserved either(assuming its size is less than 0x1000).
*/
off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
UBOOT_HEAD_LEN);
if (off < 0)
printf("Failed to reserve memory for SD boot deep sleep: %s\n",
fdt_strerror(off));
#endif
#if defined(CONFIG_FSL_ESDHC)
fdt_fixup_esdhc(blob, bd);
#endif
/*
* platform bus clock = system bus clock/2
* Here busclk = system bus clock
* We are using the platform bus clock as 1588 Timer reference
* clock source select
*/
do_fixup_by_compat_u32(blob, "fsl, gianfar-ptp-timer",
"timer-frequency", busclk / 2, 1);
/*
* clock-freq should change to clock-frequency and
* flexcan-v1.0 should change to p1010-flexcan respectively
* in the future.
*/
do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
"clock_freq", busclk / 2, 1);
do_fixup_by_compat_u32(blob, "fsl, flexcan-v1.0",
"clock-frequency", busclk / 2, 1);
do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
"clock-frequency", busclk / 2, 1);
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
CONFIG_SYS_IFC_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
#else
off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
QSPI0_BASE_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
DSPI1_BASE_ADDR);
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
#endif
}
void ft_cpu_setup(void *blob, bd_t *bd)
{
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
int spridr = immr->sysconf.spridr;
/*
* delete crypto node if not on an E-processor
* initial revisions of the MPC834xE/6xE have the original SEC 2.0.
* EA revisions got the SEC uprevved to 2.4 but since the default device
* tree contains SEC 2.0 properties we uprev them here.
*/
if (!IS_E_PROCESSOR(spridr))
fdt_fixup_crypto_node(blob, 0);
else if (IS_E_PROCESSOR(spridr) &&
(SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
REVID_MAJOR(spridr) >= 2)
fdt_fixup_crypto_node(blob, 0x0204);
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
#ifdef CONFIG_MPC8313
/*
* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
* h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
* so if on Rev. 2 (and higher) h/w, we fix them up here
*/
if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
int nodeoffset, path;
const char *prop;
nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
#if defined(CONFIG_HAS_ETH0)
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
if (prop) {
u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path, "interrupts",
NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
}
#endif
#if defined(CONFIG_HAS_ETH1)
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
if (prop) {
u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path, "interrupts",
NULL);
if (prop)
fdt_setprop(blob, path, "interrupts",
&tmp, sizeof(tmp));
}
#endif
}
}
#endif
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"timebase-frequency", (bd->bi_busfreq / 4), 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", gd->arch.core_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,soc",
"clock-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"bus-frequency", bd->bi_busfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,immr",
"clock-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
ft_qe_setup(blob);
#endif
#ifdef CONFIG_SYS_NS16550
do_fixup_by_compat_u32(blob, "ns16550",
"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
fdt_fixup_muram (blob);
#endif
}