コード例 #1
0
void maca_isr(void) {

//	print_packets("maca_isr");

	maca_entry++;

	if (bit_is_set(*MACA_STATUS, maca_status_ovr))
	{ PRINTF("maca overrun\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_busy))
	{ PRINTF("maca busy\n\r"); } 
	if (bit_is_set(*MACA_STATUS, maca_status_crc))
	{ PRINTF("maca crc error\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_to))
	{ PRINTF("maca timeout\n\r"); }

	if (data_indication_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_di);
		dma_rx->length = *MACA_GETRXLVL - 2; /* packet length does not include FCS */
//		PRINTF("maca data ind %x %d\n\r", dma_rx, dma_rx->length);
		if(maca_rx_callback != 0) { maca_rx_callback(dma_rx); }
		add_to_rx(dma_rx);
		dma_rx = 0;
	}
	if (filter_failed_irq()) {
		PRINTF("maca filter failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_flt);
	}
	if (checksum_failed_irq()) {
		PRINTF("maca checksum failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_crc);
	}
	if (softclock_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_sftclk);
	}
	if (poll_irq()) {		
		*MACA_CLRIRQ = (1 << maca_irq_poll);
	}
	if(action_complete_irq()) {
		/* PRINTF("maca action complete %d\n\r", get_field(*MACA_CONTROL,SEQUENCE)); */
		if(last_post == TX_POST) {
			if(maca_tx_callback != 0) { maca_tx_callback(tx_head); }
			dma_tx = 0;
			free_tx_head();
			last_post = NO_POST;
		}
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_acpl);		
	}

	decode_status();

	if (*MACA_IRQ != 0)
	{ PRINTF("*MACA_IRQ %x\n\r", *MACA_IRQ); }

	if(tx_head != 0) {
		post_tx();
	} else {
		post_receive();
	} 
}
コード例 #2
0
ファイル: maca.c プロジェクト: 1uk3/contiki
void maca_isr(void) {

//	print_packets("maca_isr");

	maca_entry++;

	if (bit_is_set(*MACA_STATUS, maca_status_ovr))
	{ PRINTF("maca overrun\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_busy))
	{ PRINTF("maca busy\n\r"); } 
	if (bit_is_set(*MACA_STATUS, maca_status_crc))
	{ PRINTF("maca crc error\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_to))
	{ PRINTF("maca timeout\n\r"); }

	if (data_indication_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_di);

		if (dma_rx != &dummy_ack && dma_rx != &dummy_rx)
		{
			dma_rx->length = *MACA_GETRXLVL - 2; /* packet length does not include FCS */
			dma_rx->lqi = get_lqi();
			dma_rx->rx_time = *MACA_TIMESTAMP;

			/* check if received packet needs an ack */
			if(prm_mode == AUTOACK && (dma_rx->data[1] & 0x20)) {
				/* this wait is necessary to auto-ack */
				volatile uint32_t wait_clk;
				wait_clk = *MACA_CLK + 200;
				while(*MACA_CLK < wait_clk) { continue; }
			}

			if(maca_rx_callback != 0) { maca_rx_callback(dma_rx); }

			add_to_rx(dma_rx);
		}
		dma_rx = 0;
	}
	if (filter_failed_irq()) {
		PRINTF("maca filter failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_flt);
	}
	if (checksum_failed_irq()) {
		PRINTF("maca checksum failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_crc);
	}
	if (softclock_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_sftclk);
	}
	if (poll_irq()) {		
		*MACA_CLRIRQ = (1 << maca_irq_poll);
	}
	if(action_complete_irq()) {
		/* PRINTF("maca action complete %d\n\r", get_field(*MACA_CONTROL,SEQUENCE)); */
		if(last_post == TX_POST) {
			tx_head->status = get_field(*MACA_STATUS,CODE);

#if MACA_INSERT_ACK
/* Having sent a message with the acknowledge request flag set the
 * MACA hardware will only give a tx success indication if the message
 * was acknowledged by the remote node. We need to detect this
 * condition and inject an ACK packet into the internal receive stream
 * as the higher layers are expecting to see an ACK packet.*/

			if(tx_head->status == SUCCESS && (tx_head->data[0] & MAC_ACK_REQUEST_FLAG)) {

				/* Create the dummy ack packet */

				static volatile packet_t *ack_p;
				if(ack_p = get_free_packet()) {
					ack_p->length = 3;
					ack_p->offset = 1;
					ack_p->data[0] = 3;
					ack_p->data[1] = 0x02;
					ack_p->data[2] = 0;
					ack_p->data[3] = *MACA_TXSEQNR;
					insert_at_rx_head(ack_p);
				}

			}
#endif

			if(maca_tx_callback != 0) { maca_tx_callback(tx_head); }
			dma_tx = 0;
			free_tx_head();
			last_post = NO_POST;
		}
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_acpl);		
	}

	decode_status();

	if (*MACA_IRQ != 0)
	{ PRINTF("*MACA_IRQ %x\n\r", (unsigned int)*MACA_IRQ); }

	if(tx_head != 0) {
		post_tx();
	} else {
		post_receive();
	} 
}
コード例 #3
0
ファイル: maca.c プロジェクト: EmuxEvans/contiki-snmp
void maca_isr(void) {

//	print_packets("maca_isr");

	maca_entry++;

	if (bit_is_set(*MACA_STATUS, maca_status_ovr))
	{ PRINTF("maca overrun\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_busy))
	{ PRINTF("maca busy\n\r"); } 
	if (bit_is_set(*MACA_STATUS, maca_status_crc))
	{ PRINTF("maca crc error\n\r"); }
	if (bit_is_set(*MACA_STATUS, maca_status_to))
	{ PRINTF("maca timeout\n\r"); }

	if (data_indication_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_di);
		dma_rx->length = *MACA_GETRXLVL - 2; /* packet length does not include FCS */
		dma_rx->lqi = get_lqi();
		dma_rx->rx_time = *MACA_TIMESTAMP;

		/* check if received packet needs an ack */
		if(dma_rx->data[1] & 0x20) {
			/* this wait is necessary to auto-ack */
			volatile uint32_t wait_clk;
			wait_clk = *MACA_CLK + 200;
			while(*MACA_CLK < wait_clk) { continue; }
		}

		if(maca_rx_callback != 0) { maca_rx_callback(dma_rx); }

		add_to_rx(dma_rx);
		dma_rx = 0;
	}
	if (filter_failed_irq()) {
		PRINTF("maca filter failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_flt);
	}
	if (checksum_failed_irq()) {
		PRINTF("maca checksum failed\n\r");
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_crc);
	}
	if (softclock_irq()) {
		*MACA_CLRIRQ = (1 << maca_irq_sftclk);
	}
	if (poll_irq()) {		
		*MACA_CLRIRQ = (1 << maca_irq_poll);
	}
	if(action_complete_irq()) {
		/* PRINTF("maca action complete %d\n\r", get_field(*MACA_CONTROL,SEQUENCE)); */
		if(last_post == TX_POST) {
			tx_head->status = get_field(*MACA_STATUS,CODE);
			if(maca_tx_callback != 0) { maca_tx_callback(tx_head); }
			dma_tx = 0;
			free_tx_head();
			last_post = NO_POST;
		}
		ResumeMACASync();
		*MACA_CLRIRQ = (1 << maca_irq_acpl);		
	}

	decode_status();

	if (*MACA_IRQ != 0)
	{ PRINTF("*MACA_IRQ %x\n\r", (unsigned int)*MACA_IRQ); }

	if(tx_head != 0) {
		post_tx();
	} else {
		post_receive();
	} 
}