/**
*
* @param delay the number of ticks before the output signal
* immediate output if delay is zero
* @param dwell the number of ticks of output duration
*
*/
void scheduleOutput(OutputSignal *signal, float delayMs, float durationMs) {
if (durationMs < 0) {
firmwareError("duration cannot be negative: %d", durationMs);
return;
}
if (cisnan(durationMs)) {
firmwareError("NaN in scheduleOutput", durationMs);
return;
}
int index = getRevolutionCounter() % 2;
scheduling_s * sUp = &signal->signalTimerUp[index];
scheduling_s * sDown = &signal->signalTimerDown[index];
scheduleTask("out up", sUp, (int)MS2US(delayMs), (schfunc_t) &turnPinHigh, (void *) signal->io_pin);
scheduleTask("out down", sDown, (int)MS2US(delayMs + durationMs), (schfunc_t) &turnPinLow, (void*) signal->io_pin);
}
//Nullable
static digital_input_s * finddigital_input_s(ICUDriver *driver) {
for (int i = 0; i < registeredIcus.size; i++) {
if (registeredIcus.elements[i].driver == driver) {
return ®isteredIcus.elements[i];
}
}
firmwareError(CUSTOM_ERR_ICU, "reader not found");
return (digital_input_s *) NULL;
}
/**
* @brief Reset histogram_s to orignal state
*/
void initHistogram(histogram_s *h, const char *name) {
if (efiStrlen(name) > sizeof(h->name) - 1) {
firmwareError(ERROR_HISTO_NAME, "Histogram name [%s] too long", name);
}
strcpy(h->name, name);
h->total_value = 0;
h->total_count = 0;
memset(h->values, 0, sizeof(h->values));
}
void efiIcuStart(const char *msg, ICUDriver *icup, const ICUConfig *config) {
if (icup->state != ICU_STOP && icup->state != ICU_READY) {
static char icuError[30];
sprintf(icuError, "ICU already used %s", msg);
firmwareError(CUSTOM_ERR_6679, icuError);
return;
}
icuStart(icup, config);
}
void resetLogging(Logging *logging) {
char *buffer = logging->buffer;
if (buffer == NULL) {
firmwareError("Null buffer: %s", logging->name);
return;
}
logging->linePointer = buffer;
logging->linePointer[0] = 0;
}
ioportid_t getHwPort(const char *msg, brain_pin_e brainPin) {
if (brainPin == GPIO_UNASSIGNED || brainPin == GPIO_INVALID)
return GPIO_NULL;
if (brainPin < GPIOA_0 || brainPin > GPIOH_15) {
firmwareError(CUSTOM_ERR_INVALID_PIN, "%s: Invalid brain_pin_e: %d", msg, brainPin);
return GPIO_NULL;
}
return PORTS[(brainPin - GPIOA_0)/ PORT_SIZE];
}
ioportmask_t getHwPin(brain_pin_e brainPin) {
if (brainPin == GPIO_UNASSIGNED)
return EFI_ERROR_CODE;
if (brainPin > GPIO_UNASSIGNED || brainPin < 0) {
firmwareError("Invalid brain_pin_e: %d", brainPin);
return EFI_ERROR_CODE;
}
return brainPin % PORT_SIZE;
}
/**
* @brief Reset histogram_s to orignal state
*/
void initHistogram(histogram_s *h, const char *name) {
if (efiStrlen(name) > sizeof(h->name) - 1) {
firmwareError(OBD_PCM_Processor_Fault, "Histogram name [%s] too long", name);
}
strcpy(h->name, name);
h->total_value = 0;
h->total_count = 0;
memset(h->values, 0, sizeof(h->values));
}
GPIO_TypeDef * getHwPort(brain_pin_e brainPin) {
if (brainPin == GPIO_UNASSIGNED)
return GPIO_NULL;
if (brainPin > GPIO_UNASSIGNED || brainPin < 0) {
firmwareError("Invalid brain_pin_e: %d", brainPin);
return GPIO_NULL;
}
return PORTS[brainPin / PORT_SIZE];
}
ioportid_t getHwPort(brain_pin_e brainPin) {
if (brainPin == GPIO_UNASSIGNED)
return GPIO_NULL;
if (brainPin > GPIO_UNASSIGNED || brainPin < 0) {
firmwareError(CUSTOM_ERR_INVALID_PIN, "Invalid brain_pin_e: %d", brainPin);
return GPIO_NULL;
}
return PORTS[brainPin / PORT_SIZE];
}
void lcd_HD44780_init(Logging *sharedLogger) {
logger = sharedLogger;
addConsoleAction("lcdinfo", lcdInfo);
if (engineConfiguration->displayMode > DM_HD44780_OVER_PCF8574) {
firmwareError("Unexpected displayMode %d", engineConfiguration->displayMode);
return;
}
printMsg(logger, "lcd_HD44780_init %d", engineConfiguration->displayMode);
if (engineConfiguration->displayMode == DM_HD44780) {
// initialize hardware lines
mySetPadMode2("lcd RS", boardConfiguration->HD44780_rs, PAL_MODE_OUTPUT_PUSHPULL);
mySetPadMode2("lcd E", boardConfiguration->HD44780_e, PAL_MODE_OUTPUT_PUSHPULL);
mySetPadMode2("lcd DB4", boardConfiguration->HD44780_db4, PAL_MODE_OUTPUT_PUSHPULL);
mySetPadMode2("lcd DB6", boardConfiguration->HD44780_db5, PAL_MODE_OUTPUT_PUSHPULL);
mySetPadMode2("lcd DB7", boardConfiguration->HD44780_db6, PAL_MODE_OUTPUT_PUSHPULL);
mySetPadMode2("lcd DB8", boardConfiguration->HD44780_db7, PAL_MODE_OUTPUT_PUSHPULL);
// and zero values
palWritePad(getHwPort(boardConfiguration->HD44780_rs), getHwPin(boardConfiguration->HD44780_rs), 0);
palWritePad(getHwPort(boardConfiguration->HD44780_e), getHwPin(boardConfiguration->HD44780_e), 0);
palWritePad(getHwPort(boardConfiguration->HD44780_db4), getHwPin(boardConfiguration->HD44780_db4), 0);
palWritePad(getHwPort(boardConfiguration->HD44780_db5), getHwPin(boardConfiguration->HD44780_db5), 0);
palWritePad(getHwPort(boardConfiguration->HD44780_db6), getHwPin(boardConfiguration->HD44780_db6), 0);
palWritePad(getHwPort(boardConfiguration->HD44780_db7), getHwPin(boardConfiguration->HD44780_db7), 0);
}
chThdSleepMilliseconds(20); // LCD needs some time to wake up
lcd_HD44780_write(LCD_HD44780_RESET); // reset 1x
chThdSleepMilliseconds(1);
lcd_HD44780_write(LCD_HD44780_RESET); // reset 2x
lcd_HD44780_write(LCD_HD44780_RESET); // reset 3x
lcd_HD44780_write(LCD_HD44780_4_BIT_BUS); // 4 bit, 2 line
chThdSleepMicroseconds(40);
lcd_HD44780_write(LCD_HD44780_4_BIT_BUS); // 4 bit, 2 line
lcd_HD44780_write(0x80);
chThdSleepMicroseconds(40);
lcd_HD44780_write_command(0x08); // display and cursor control
chThdSleepMicroseconds(40);
lcd_HD44780_write_command(LCD_HD44780_DISPLAY_CLEAR);
chThdSleepMilliseconds(2);
lcd_HD44780_write_command(LCD_HD44780_SHIFT_CURSOR_RIGHT);
chThdSleepMilliseconds(2);
lcd_HD44780_write_command(LCD_HD44780_DISPLAY_ON);
lcd_HD44780_set_position(0, 0);
printMsg(logger, "lcd_HD44780_init() done");
}
void startTunerStudioConnectivity(void) {
if (sizeof(persistent_config_s) != getTunerStudioPageSize(0))
firmwareError("TS page size mismatch: %d/%d", sizeof(persistent_config_s), getTunerStudioPageSize(0));
if (sizeof(TunerStudioOutputChannels) != TS_OUTPUT_SIZE)
firmwareError("TS outputs size mismatch: %d/%d", sizeof(TunerStudioOutputChannels), TS_OUTPUT_SIZE);
memset(&tsState, 0, sizeof(tsState));
syncTunerStudioCopy();
addConsoleAction("tsinfo", printTsStats);
addConsoleAction("reset_ts", resetTs);
addConsoleActionI("set_ts_speed", setTsSpeed);
tsChannel.channel = getTsSerialDevice();
tsChannel.writeBuffer = tsCrcWriteBuffer;
chThdCreateStatic(tsThreadStack, sizeof(tsThreadStack), NORMALPRIO, tsThreadEntryPoint, NULL);
}
static uint32_t doFindTrigger(TriggerStimulatorHelper *helper, trigger_shape_s * shape,
trigger_config_s const*triggerConfig, TriggerState *state) {
for (int i = 0; i < 4 * PWM_PHASE_MAX_COUNT; i++) {
helper->nextStep(state, shape, i, triggerConfig);
if (state->shaft_is_synchronized)
return i;
}
firmwareError("findTriggerZeroEventIndex() failed");
return EFI_ERROR_CODE;
}
static void doAddAction(const char *token, action_type_e type, Void callback, void *param) {
for (uint32_t i = 0; i < efiStrlen(token);i++) {
char ch = token[i];
if (ch != mytolower(ch)) {
firmwareError(CUSTOM_ERR_COMMAND_LOWER_CASE_EXPECTED, "lowerCase expected [%s]", token);
}
}
for (int i = 0; i < consoleActionCount; i++) {
if (strcmp(token, consoleActions[i].token) == 0 /* zero result means strings are equal */) {
firmwareError(CUSTOM_SAME_TWICE, "Same action twice [%s]", token);
}
}
efiAssertVoid(CUSTOM_CONSOLE_TOO_MANY, consoleActionCount < CONSOLE_MAX_ACTIONS, "Too many console actions");
TokenCallback *current = &consoleActions[consoleActionCount++];
current->token = token;
current->parameterType = type;
current->callback = callback;
current->param = param;
}
/**
* @returns true if data does not fit into this buffer
*/
static bool validateBuffer(Logging *logging, uint32_t extraLen) {
if (logging->buffer == NULL) {
firmwareError("Logging not initialized: %s", logging->name);
return true;
}
if (remainingSize(logging) < extraLen + 1) {
warning(OBD_PCM_Processor_Fault, "buffer overflow %s", logging->name);
return true;
}
return false;
}
static void addChannel(const char *name, adc_channel_e setting, adc_channel_mode_e mode) {
if (setting == EFI_ADC_NONE) {
return;
}
if (adcHwChannelEnabled[setting] != ADC_OFF) {
getPinNameByAdcChannel(name, setting, errorMsgBuff);
firmwareError(CUSTOM_ERR_ADC_USED, "ADC mapping error: input %s for %s already used by %s?", errorMsgBuff, name, adcHwChannelUsage[setting]);
}
adcHwChannelUsage[setting] = name;
adcHwChannelEnabled[setting] = mode;
}
OutputSignal * OutputSignalList::add(io_pin_e ioPin) {
if (size == OUTPUT_SIGNAL_MAX_SIZE) {
firmwareError("Too many signals, adding %d", ioPin);
return NULL;
}
OutputSignal *signal = &signals[size++];
initOutputSignal(signal, ioPin);
return signal;
}
/**
* this method acquires system lock to guard the shared intermediateLoggingBuffer memory stream
*/
void vappendPrintf(Logging *logging, const char *fmt, va_list arg) {
efiAssertVoid(getRemainingStack(chThdSelf()) > 128, "lowstck#5b");
if (!intermediateLoggingBufferInited) {
firmwareError("intermediateLoggingBufferInited not inited!");
return;
}
int wasLocked = lockAnyContext();
vappendPrintfI(logging, fmt, arg);
if (!wasLocked) {
unlockAnyContext();
}
}
static void usTimerWatchDog(void) {
if (getTimeNowNt() >= lastSetTimerTimeNt + 2 * CORE_CLOCK) {
strcpy(buff, "no_event");
itoa10(&buff[8], lastSetTimerValue);
firmwareError(OBD_PCM_Processor_Fault, buff);
return;
}
msg = isTimerPending ? "No_cb too long" : "Timer not awhile";
// 2 seconds of inactivity would not look right
efiAssertVoid(getTimeNowNt() < lastSetTimerTimeNt + 2 * CORE_CLOCK, msg);
}
void PeriodicTask(efitime_t nowNt) override
{
if (nowNt >= lastSetTimerTimeNt + 2 * CORE_CLOCK) {
strcpy(buff, "no_event");
itoa10(&buff[8], lastSetTimerValue);
firmwareError(CUSTOM_ERR_SCHEDULING_ERROR, buff);
return;
}
msg = isTimerPending ? "No_cb too long" : "Timer not awhile";
// 2 seconds of inactivity would not look right
efiAssertVoid(CUSTOM_ERR_6682, nowNt < lastSetTimerTimeNt + 2 * CORE_CLOCK, msg);
}
/**
* Number of injections into each cylinder per engine cycle
*/
static int getNumberOfInjections(injection_mode_e mode DECLARE_ENGINE_PARAMETER_S) {
switch (mode) {
case IM_SIMULTANEOUS:
return engineConfiguration->specs.cylindersCount;
case IM_SEQUENTIAL:
return 1;
case IM_BATCH:
return engineConfiguration->specs.cylindersCount / 2;
default:
firmwareError("Unexpected getFuelMultiplier %d", mode);
return 1;
}
}
/*
* Return current TPS position based on configured ADC levels, and adc
*
* */
float getTpsValue(int adc) {
if (adc < engineConfiguration->tpsMin) {
return 0.0f;
}
if (adc > engineConfiguration->tpsMax) {
return 100.0f;
}
// todo: double comparison using EPS
if (engineConfiguration->tpsMin == engineConfiguration->tpsMax) {
firmwareError("Invalid TPS configuration: same value");
return 0.0f;
}
return interpolate(engineConfiguration->tpsMin, 0, engineConfiguration->tpsMax, 100, adc);
}
/**
* @returns true if data does not fit into this buffer
*/
static INLINE bool validateBuffer(Logging *logging, uint32_t extraLen) {
if (logging->buffer == NULL) {
firmwareError("Logging not initialized: %s", logging->name);
return true;
}
if (remainingSize(logging) < extraLen + 1) {
#if EFI_PROD_CODE
warning(OBD_PCM_Processor_Fault, "output overflow %s", logging->name);
#endif
return true;
}
return false;
}
/**
* @brief Initialize the hardware output pin while also assigning it a logical name
*/
void initOutputPinExt(const char *msg, OutputPin *outputPin, ioportid_t port, uint32_t pinNumber, iomode_t mode) {
if (outputPin->port != NULL && (outputPin->port != port || outputPin->pin != pinNumber)) {
/**
* here we check if another physical pin is already assigned to this logical output
*/
// todo: need to clear '&outputs' in io_pins.c
firmwareError(OBD_PCM_Processor_Fault, "outputPin [%s] already assigned to %x%d", msg, outputPin->port, outputPin->pin);
return;
}
outputPin->currentLogicValue = INITIAL_PIN_STATE;
outputPin->port = port;
outputPin->pin = pinNumber;
mySetPadMode(msg, port, pinNumber, mode);
}
void EventQueue::insertTask(scheduling_s *scheduling, uint64_t nowUs, int delayUs, schfunc_t callback, void *param) {
if (callback == NULL)
firmwareError("NULL callback");
uint64_t time = nowUs + delayUs;
int alreadyPending = checkIfPending(scheduling);
if (alreadyPending || hasFirmwareError())
return;
scheduling->momentUs = time;
scheduling->callback = callback;
scheduling->param = param;
LL_PREPEND(head, scheduling);
}
static const char *getPinShortName(io_pin_e pin) {
switch (pin) {
case ALTERNATOR_SWITCH:
return "AL";
case FUEL_PUMP_RELAY:
return "FP";
case FAN_RELAY:
return "FN";
case O2_HEATER:
return "O2H";
default:
firmwareError("No short name for %d", (int) pin);
return "";
}
}
/**
* Schedules a callback 'angle' degree of crankshaft from now.
* The callback would be executed once after the duration of time which
* it takes the crankshaft to rotate to the specified angle.
*/
void scheduleByAngle(int rpm, scheduling_s *timer, angle_t angle, schfunc_t callback, void *param) {
if (!isValidRpm(rpm)) {
/**
* this might happen in case of a single trigger event after a pause - this is normal, so no
* warning here
*/
return;
}
float delayUs = getOneDegreeTimeUs(rpm) * angle;
if (cisnan(delayUs)) {
firmwareError("NaN delay?");
return;
}
scheduleTask("by angle", timer, (int) delayUs, callback, param);
}
//Nullable
ICUDriver * getInputCaptureDriver(const char *msg, brain_pin_e hwPin) {
if (hwPin == GPIO_UNASSIGNED || hwPin == GPIO_INVALID) {
return NULL;
}
#if STM32_ICU_USE_TIM1
if (hwPin == GPIOA_8 ||
hwPin == GPIOA_9 ||
hwPin == GPIOE_9 ||
hwPin == GPIOE_11) {
return &ICUD1;
}
#endif
#if STM32_ICU_USE_TIM2
if (hwPin == GPIOA_1 ||
hwPin == GPIOA_5 ||
hwPin == GPIOA_15 ||
hwPin == GPIOB_3) {
return &ICUD2;
}
#endif
#if STM32_ICU_USE_TIM3
if (hwPin == GPIOA_6 ||
hwPin == GPIOA_7 ||
hwPin == GPIOB_4 ||
hwPin == GPIOB_5 ||
hwPin == GPIOC_6 ||
hwPin == GPIOC_7) {
return &ICUD3;
}
#endif
#if STM32_ICU_USE_TIM8
if (hwPin == GPIOC_6 ||
hwPin == GPIOC_7) {
return &ICUD8;
}
#endif
#if STM32_ICU_USE_TIM9
if (hwPin == GPIOA_2 ||
hwPin == GPIOA_3 ||
hwPin == GPIOE_5 ||
hwPin == GPIOE_6) {
return &ICUD9;
}
#endif
firmwareError(CUSTOM_ERR_NOT_INPUT_PIN, "%s: Not input pin %s", msg, hwPortname(hwPin));
return (ICUDriver *) NULL;
}
void initializeIgnitionActions(float advance, float dwellAngle, engine_configuration_s *engineConfiguration,
engine_configuration2_s *engineConfiguration2, IgnitionEventList *list) {
efiAssertVoid(engineConfiguration->cylindersCount > 0, "cylindersCount");
list->resetEventList();
switch (engineConfiguration->ignitionMode) {
case IM_ONE_COIL:
for (int i = 0; i < engineConfiguration->cylindersCount; i++) {
// todo: extract method
float localAdvance = advance + 720.0f * i / engineConfiguration->cylindersCount;
registerSparkEvent(engineConfiguration, &engineConfiguration2->triggerShape, list,
SPARKOUT_1_OUTPUT, localAdvance, dwellAngle);
}
break;
case IM_WASTED_SPARK:
for (int i = 0; i < engineConfiguration->cylindersCount; i++) {
float localAdvance = advance + 720.0f * i / engineConfiguration->cylindersCount;
int wastedIndex = i % (engineConfiguration->cylindersCount / 2);
int id = getCylinderId(engineConfiguration->firingOrder, wastedIndex) - 1;
io_pin_e ioPin = (io_pin_e) (SPARKOUT_1_OUTPUT + id);
registerSparkEvent(engineConfiguration, &engineConfiguration2->triggerShape, list,
ioPin, localAdvance, dwellAngle);
}
break;
case IM_INDIVIDUAL_COILS:
for (int i = 0; i < engineConfiguration->cylindersCount; i++) {
float localAdvance = advance + 720.0f * i / engineConfiguration->cylindersCount;
io_pin_e pin = (io_pin_e) ((int) SPARKOUT_1_OUTPUT + getCylinderId(engineConfiguration->firingOrder, i) - 1);
registerSparkEvent(engineConfiguration, &engineConfiguration2->triggerShape, list, pin,
localAdvance, dwellAngle);
}
break;
default:
firmwareError("unsupported ignitionMode %d in initializeIgnitionActions()", engineConfiguration->ignitionMode);
}
}
/**
* @param index from zero to cylindersCount - 1
* @return cylinderId from one to cylindersCount
*/
int getCylinderId(firing_order_e firingOrder, int index) {
switch (firingOrder) {
case FO_ONE_CYLINDER:
return 1;
case FO_1_THEN_3_THEN_4_THEN2:
return order_1_THEN_3_THEN_4_THEN2[index];
case FO_1_THEN_5_THEN_3_THEN_6_THEN_2_THEN_4:
return order_1_THEN_5_THEN_3_THEN_6_THEN_2_THEN_4[index];
case FO_1_8_4_3_6_5_7_2:
return order_1_8_4_3_6_5_7_2[index];
default:
firmwareError("getCylinderId not supported for %d", firingOrder);
}
return -1;
}
