コード例 #1
0
ファイル: env.c プロジェクト: qgp/armboot
/*
 * save environment buffer back to flash
 * returns -1 on error, 0 if ok
 */
int board_env_save(bd_t *bd, env_t *env, int size)
{
    int rc;
    ulong start_addr, end_addr;

#if CFG_ENV_SIZE <= CFG_ENV_SECT_SIZE
#error Make sure that CFG_ENV_SIZE <= CFG_ENV_SECT_SIZE
#endif    

    start_addr = CFG_ENV_ADDR;
    end_addr   = start_addr + CFG_ENV_SIZE - 1;

    rc = flash_sect_protect(0, CFG_ENV_ADDR, end_addr);
    if (rc < 0)
      return rc;

    rc = flash_sect_erase(start_addr, end_addr);
    if (rc < 0)
    {
	flash_sect_protect(1, start_addr, end_addr);
	flash_perror(rc);
	return rc;
    }
    
    printf("Saving Environment to Flash...");
    rc = flash_write((uchar*)env, start_addr, size);
    if (rc < 0)
      flash_perror(rc);
    else 
      printf("done.\n");

    (void)flash_sect_protect(1, start_addr, end_addr);

    return 0;
}
コード例 #2
0
ファイル: env_flash.c プロジェクト: AdityaL05/uboot
int saveenv(void){
	char *saved_data = NULL;
	int rc = 1;
	char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
	ulong up_data = 0;

	up_data = (end_addr_new + 1 - ((long)flash_addr_new + CFG_ENV_SIZE));

	if(up_data){
		if((saved_data = malloc(up_data)) == NULL){
			printf("## Error: unable to save the rest of sector (%ld)\n", up_data);
			goto Done;
		}

		memcpy(saved_data, (void *)((long)flash_addr_new + CFG_ENV_SIZE), up_data);
	}
#endif
	if(flash_sect_erase((ulong)flash_addr_new, end_addr_new)){
		goto Done;
	}

	if((rc = flash_write((char *)env_ptr->data, (ulong)&(flash_addr_new->data), sizeof(env_ptr->data))) ||
	   (rc = flash_write((char *)&(env_ptr->crc), (ulong)&(flash_addr_new->crc), sizeof(env_ptr->crc))) ||
	   (rc = flash_write(&flag, (ulong)&(flash_addr->flags), sizeof(flash_addr->flags))) ||
	   (rc = flash_write(&new_flag, (ulong)&(flash_addr_new->flags), sizeof(flash_addr_new->flags)))){
		flash_perror(rc);
		goto Done;
	}

#if CFG_ENV_SECT_SIZE > CFG_ENV_SIZE
	if(up_data){ /* restore the rest of sector */
		if(flash_write(saved_data, (long)flash_addr_new + CFG_ENV_SIZE, up_data)){
			flash_perror(rc);
			goto Done;
		}
	}
#endif
	env_t * etmp = flash_addr;
	ulong ltmp = end_addr;

	flash_addr = flash_addr_new;
	flash_addr_new = etmp;

	end_addr = end_addr_new;
	end_addr_new = ltmp;

	rc = 0;

Done:

	if(saved_data){
		free(saved_data);
	}

	return(rc);
}
コード例 #3
0
static __inline__ int
store_block (uchar * src, unsigned offset, unsigned len)
{
	ulong newsize = offset + len;
#ifdef CONFIG_SYS_DIRECT_FLASH_NFS
	int i, rc = 0;

	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++) {
		/* start address in flash? */
		if (load_addr + offset >= flash_info[i].start[0]) {
			rc = 1;
			break;
		}
	}

	if (rc) { /* Flash is destination for this packet */
		rc = flash_write ((uchar *)src, (ulong)(load_addr+offset), len);
		if (rc) {
			flash_perror (rc);
			return -1;
		}
	} else
#endif /* CONFIG_SYS_DIRECT_FLASH_NFS */
	{
		(void)memcpy ((void *)(load_addr + offset), src, len);
	}

	if (NetBootFileXferSize < (offset+len))
		NetBootFileXferSize = newsize;
	return 0;
}
コード例 #4
0
ファイル: cmd_custom.c プロジェクト: alemv/u-boot
/*
 * Erase environment sector
 */
int do_default_env(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]){
	int	rc, rcode = 0;
#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
	unsigned char env_buffer[CFG_ENV_SECT_SIZE];
#endif

#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
	/* copy whole env sector to temporary buffer */
	memcpy(env_buffer, (void *)CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);

	/* clear env part */
	memset(env_buffer, 0xFF, CFG_ENV_SIZE);
#endif

	/* erase whole env sector */
	if(flash_sect_erase(CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1)){
		rcode = 1;
	}

#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
	/* restore data from buffer in FLASH */
	rc = flash_write((char *)env_buffer, CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);

	if(rc != 0){
		flash_perror(rc);
		rcode = 1;
	}
#endif

	return(rcode);
}
コード例 #5
0
ファイル: cmd_install.c プロジェクト: ashcharles/verdex-uboot
int do_install ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	int rc;
	size_t sect_top;

	if (argc != 1) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	for(sect_top=0; sect_top<sizeof(u_boot_bin_data); sect_top+=PHYS_FLASH_SECT_SIZE) continue;
	sect_top--;
	flash_sect_protect(0, CFG_FLASH_BASE, sect_top);
	flash_sect_erase(CFG_FLASH_BASE, sect_top);

	puts ("Copying to Flash... ");

	rc = flash_write ((uchar *)u_boot_bin_data, CFG_FLASH_BASE, sizeof(u_boot_bin_data));
	if (rc != 0) {
		flash_perror (rc);
		return (1);
	}
	puts ("done\n");
	return 0;
}
コード例 #6
0
static __inline__ void store_block(unsigned block, uchar * src, unsigned len){
	ulong offset = block * TFTP_BLOCK_SIZE + TftpBlockWrapOffset;
	ulong newsize = offset + len;

#ifdef CFG_DIRECT_FLASH_TFTP
	int i, rc = 0;

	for(i=0; i<CFG_MAX_FLASH_BANKS; i++){
		/* start address in flash? */
		if(load_addr + offset >= flash_info[i].start[0]){
			rc = 1;
			break;
		}
	}

	if(rc){ /* Flash is destination for this packet */
		rc = flash_write((char *)src, (ulong)(load_addr+offset), len);

		if(rc){
			flash_perror(rc);
			NetState = NETLOOP_FAIL;
			return;
		}
	} else
#endif /* CFG_DIRECT_FLASH_TFTP */
	{
		(void)memcpy((void *)(load_addr + offset), src, len);
	}

	if(NetBootFileXferSize < newsize){
		NetBootFileXferSize = newsize;
	}
}
コード例 #7
0
int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong addr, dest, count;
	int size;

	if (argc != 4) {
		print_cmd_help(cmdtp);
		return 1;
	}

	/* Check for size specification */
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr  = simple_strtoul(argv[1], NULL, 16);
	dest  = simple_strtoul(argv[2], NULL, 16);
	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts("## Error: zero length?\n");
		return 1;
	}

#if !defined(CFG_NO_FLASH)
	/* check if we are copying to Flash */
	if (addr2info(dest) != NULL) {
		int rc;

		puts("Copying to FLASH...\n");

		rc = flash_write((char *)addr, dest, count * size);

		if (rc != 0) {
			flash_perror(rc);
			return 1;
		}

		puts("Done!\n\n");

		return 0;
	}
#endif /* !CFG_NO_FLASH */

	while (count-- > 0) {
		if (size == 4) {
			*((ulong *)dest) = *((ulong *)addr);
		} else if (size == 2) {
			*((ushort *)dest) = *((ushort *)addr);
		} else {
			*((u_char *)dest) = *((u_char *)addr);
		}

		addr += size;
		dest += size;
	}

	return 0;
}
コード例 #8
0
ファイル: env_flash.c プロジェクト: AdityaL05/uboot
int saveenv(void){
	int	len, rc;
	ulong end_addr, flash_sect_addr;
#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)
	ulong flash_offset;
	uchar env_buffer[CFG_ENV_SECT_SIZE];
#else
	uchar *env_buffer = (uchar *)env_ptr;
#endif /* CFG_ENV_SECT_SIZE */
	int rcode = 0;

#if defined(CFG_ENV_SECT_SIZE) && (CFG_ENV_SECT_SIZE > CFG_ENV_SIZE)

	flash_offset    = ((ulong)flash_addr) & (CFG_ENV_SECT_SIZE-1);
	flash_sect_addr = ((ulong)flash_addr) & ~(CFG_ENV_SECT_SIZE-1);

	//debug("copy old content: sect_addr: %08lX  env_addr: %08lX  offset: %08lX\n", flash_sect_addr, (ulong)flash_addr, flash_offset);

	/* copy old contents to temporary buffer */
	memcpy(env_buffer, (void *)flash_sect_addr, CFG_ENV_SECT_SIZE);

	/* copy current environment to temporary buffer */
	memcpy((uchar *)((unsigned long)env_buffer + flash_offset), env_ptr, CFG_ENV_SIZE);

	len	 = CFG_ENV_SECT_SIZE;
#else
	flash_sect_addr = (ulong)flash_addr;
	len = CFG_ENV_SIZE;
#endif	/* CFG_ENV_SECT_SIZE */

	end_addr = flash_sect_addr + len - 1;

	if(flash_sect_erase(flash_sect_addr, end_addr)){
		return(1);
	}

	rc = flash_write((char *)env_buffer, flash_sect_addr, len);

	if(rc != 0){
		flash_perror(rc);
		rcode = 1;
	} else {
		//debug("done\n");
	}

	return(rcode);
}
コード例 #9
0
static __inline__ void
store_block (unsigned block, uchar * src, unsigned len)
{
	ulong offset = block * TftpBlkSize + TftpBlockWrapOffset;
	ulong newsize = offset + len;
#ifdef CONFIG_SYS_DIRECT_FLASH_TFTP
	int i, rc = 0;

	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; i++) {
		/* start address in flash? */
		if (flash_info[i].flash_id == FLASH_UNKNOWN)
			continue;
		if (load_addr + offset >= flash_info[i].start[0]) {
			rc = 1;
			break;
		}
	}

	if (rc) { /* Flash is destination for this packet */
		rc = flash_write ((char *)src, (ulong)(load_addr+offset), len);
		if (rc) {
			flash_perror (rc);
			NetState = NETLOOP_FAIL;
			return;
		}
	}
	else
#endif /* CONFIG_SYS_DIRECT_FLASH_TFTP */
	{
		(void)memcpy((void *)(load_addr + offset), src, len);
	}
#ifdef CONFIG_MCAST_TFTP
	if (Multicast)
		ext2_set_bit(block, Bitmap);
#endif

	if (NetBootFileXferSize < newsize)
		NetBootFileXferSize = newsize;
}
コード例 #10
0
ファイル: cmd_mem.c プロジェクト: ierton/mboot
int do_mem_cp (struct cmd_ctx *ctx, int argc, char * const argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4)
		return cmd_usage(ctx->cmdtp);

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CONFIG_SYS_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");

		rc = flash_write ((char *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
				 && (addr2info(dest) == NULL)
#endif
	   ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;

		/* reset watchdog from time to time */
		if ((count % (64 << 10)) == 0)
			WATCHDOG_RESET();
	}
	return 0;
}
コード例 #11
0
ファイル: ap1000.c プロジェクト: cmp1084/u-boot
/** Console command to display and set the software reconfigure byte
  * <pre>
  * swconfig        - display the current value of the software reconfigure byte
  * swconfig [#]    - change the software reconfigure byte to #
  * </pre>
  * @param  *cmdtp  [IN] as passed by run_command (ignored)
  * @param  flag    [IN] as passed by run_command (ignored)
  * @param  argc    [IN] as passed by run_command if 1, display, if 2 change
  * @param  *argv[] [IN] contains the parameters to use
  * @return
  * <pre>
  *      0 if passed
  *     -1 if failed
  * </pre>
  */
int do_swconfigbyte (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
	unsigned char *sector_buffer = NULL;
	unsigned char input_char;
	int write_result;
	unsigned int input_uint;

	/* display value if no argument */
	if (argc < 2) {
		printf ("Software configuration byte is currently: 0x%02x\n",
			*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
					     SW_BYTE_SECTOR_OFFSET)));
		return 0;
	} else if (argc > 3) {
		printf ("Too many arguments\n");
		return -1;
	}

	/* if 3 arguments, 3rd argument is the address to use */
	if (argc == 3) {
		input_uint = simple_strtoul (argv[1], NULL, 16);
		sector_buffer = (unsigned char *) input_uint;
	} else {
		sector_buffer = (unsigned char *) DEFAULT_TEMP_ADDR;
	}

	input_char = simple_strtoul (argv[1], NULL, 0);
	if ((input_char & ~SW_BYTE_MASK) != 0) {
		printf ("Input of 0x%02x will be masked to 0x%02x\n",
			input_char, (input_char & SW_BYTE_MASK));
		input_char = input_char & SW_BYTE_MASK;
	}

	memcpy (sector_buffer, (void *) SW_BYTE_SECTOR_ADDR,
		SW_BYTE_SECTOR_SIZE);
	sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char;


	printf ("Erasing Flash...");
	if (flash_sect_erase
	    (SW_BYTE_SECTOR_ADDR,
	     (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))) {
		return -1;
	}

	printf ("Writing to Flash... ");
	write_result =
		flash_write ((char *)sector_buffer, SW_BYTE_SECTOR_ADDR,
			     SW_BYTE_SECTOR_SIZE);
	if (write_result != 0) {
		flash_perror (write_result);
		return -1;
	} else {
		printf ("done\n");
		printf ("Software configuration byte is now: 0x%02x\n",
			*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
					     SW_BYTE_SECTOR_OFFSET)));
	}

	return 0;
}
コード例 #12
0
static int
mpl_prg(uchar *src, ulong size)
{
	ulong start;
	flash_info_t *info;
	int i, rc;
#if defined(CONFIG_PATI)
	int start_sect;
#endif
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
	char *copystr = (char *)src;
	ulong *magic = (ulong *)src;
#endif

	info = &flash_info[0];

#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
	if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
		puts("Bad Magic number\n");
		return -1;
	}
	/* some more checks before we delete the Flash... */
	/* Checking the ISO_STRING prevents to program a
	 * wrong Firmware Image into the flash.
	 */
	i = 4; /* skip Magic number */
	while (1) {
		if (strncmp(&copystr[i], "MEV-", 4) == 0)
			break;
		if (i++ >= 0x100) {
			puts("Firmware Image for unknown Target\n");
			return -1;
		}
	}
	/* we have the ISO STRING, check */
	if (strncmp(&copystr[i], CONFIG_ISO_STRING, sizeof(CONFIG_ISO_STRING)-1) != 0) {
		printf("Wrong Firmware Image: %s\n", &copystr[i]);
		return -1;
	}
#if !defined(CONFIG_PATI)
	start = 0 - size;
	for (i = info->sector_count-1; i > 0; i--) {
		info->protect[i] = 0; /* unprotect this sector */
		if (start >= info->start[i])
			break;
	}
	/* set-up flash location */
	/* now erase flash */
	printf("Erasing at %lx (sector %d) (start %lx)\n",
				start,i,info->start[i]);
	if ((rc = flash_erase (info, i, info->sector_count-1)) != 0) {
		puts("ERROR ");
		flash_perror(rc);
		return (1);
	}

#else /* #if !defined(CONFIG_PATI */
	start = FIRM_START;
	start_sect = -1;
	for (i = 0; i < info->sector_count; i++) {
		if (start < info->start[i]) {
			start_sect = i - 1;
			break;
		}
	}

	info->protect[i - 1] = 0;	/* unprotect this sector */
	for (; i < info->sector_count; i++) {
		if ((start + size) < info->start[i])
			break;
		info->protect[i] = 0;	/* unprotect this sector */
	}

	i--;
	/* set-up flash location */
	/* now erase flash */
	printf ("Erasing at %lx to %lx (sector %d to %d) (%lx to %lx)\n",
		start, start + size, start_sect, i,
		info->start[start_sect], info->start[i]);
	if ((rc = flash_erase (info, start_sect, i)) != 0) {
		puts ("ERROR ");
		flash_perror (rc);
		return (1);
	}
#endif /* defined(CONFIG_PATI) */

#elif defined(CONFIG_VCMA9)
	start = 0;
	for (i = 0; i <info->sector_count; i++) {
		info->protect[i] = 0; /* unprotect this sector */
		if (size < info->start[i])
		    break;
	}
	/* set-up flash location */
	/* now erase flash */
	printf("Erasing at %lx (sector %d) (start %lx)\n",
				start,0,info->start[0]);
	if ((rc = flash_erase (info, 0, i)) != 0) {
		puts("ERROR ");
		flash_perror(rc);
		return (1);
	}

#endif
	printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
		(ulong)src, size);
	if ((rc = flash_write ((char *)src, start, size)) != 0) {
		puts("ERROR ");
		flash_perror(rc);
		return (1);
	}
	puts("OK programming done\n");
	return 0;
}
コード例 #13
0
ファイル: env_flash.c プロジェクト: avmwww/u-boot
int saveenv(void)
{
	int	len, rc;
	ulong	end_addr;
	ulong	flash_sect_addr;
#if defined(CONFIG_ENV_SECT_SIZE) && (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE)
	ulong	flash_offset;
	uchar	env_buffer[CONFIG_ENV_SECT_SIZE];
#else
	uchar *env_buffer = (uchar *)env_ptr;
#endif	/* CONFIG_ENV_SECT_SIZE */
	int rcode = 0;

#if defined(CONFIG_ENV_SECT_SIZE) && (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE)

	flash_offset    = ((ulong)flash_addr) & (CONFIG_ENV_SECT_SIZE-1);
	flash_sect_addr = ((ulong)flash_addr) & ~(CONFIG_ENV_SECT_SIZE-1);

	debug ( "copy old content: "
		"sect_addr: %08lX  env_addr: %08lX  offset: %08lX\n",
		flash_sect_addr, (ulong)flash_addr, flash_offset);

	/* copy old contents to temporary buffer */
	memcpy (env_buffer, (void *)flash_sect_addr, CONFIG_ENV_SECT_SIZE);

	/* copy current environment to temporary buffer */
	memcpy ((uchar *)((unsigned long)env_buffer + flash_offset),
		env_ptr,
		CONFIG_ENV_SIZE);

	len	 = CONFIG_ENV_SECT_SIZE;
#else
	flash_sect_addr = (ulong)flash_addr;
	len	 = CONFIG_ENV_SIZE;
#endif	/* CONFIG_ENV_SECT_SIZE */

#ifndef CONFIG_INFERNO
	end_addr = flash_sect_addr + len - 1;
#else
	/* this is the last sector, and the size is hardcoded here */
	/* otherwise we will get stack problems on loading 128 KB environment */
	end_addr = flash_sect_addr + CONFIG_INFERNO - 1;
#endif

	debug ("Protect off %08lX ... %08lX\n",
		(ulong)flash_sect_addr, end_addr);

	if (flash_sect_protect (0, flash_sect_addr, end_addr))
		return 1;

	puts ("Erasing Flash...");
	if (flash_sect_erase (flash_sect_addr, end_addr))
		return 1;

	puts ("Writing to Flash... ");
	rc = flash_write((char *)env_buffer, flash_sect_addr, len);
	if (rc != 0) {
		flash_perror (rc);
		rcode = 1;
	} else {
		puts ("done\n");
	}

	/* try to re-protect */
	(void) flash_sect_protect (1, flash_sect_addr, end_addr);
	return rcode;
}
コード例 #14
0
ファイル: env_flash.c プロジェクト: 0xFelix/u-boot-edminiv2
int saveenv(void)
{
	env_t	env_new;
	int	rc = 1;
	char	*saved_data = NULL;
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	ulong	up_data = 0;

	up_data = end_addr + 1 - ((long)flash_addr + CONFIG_ENV_SIZE);
	debug("Data to save 0x%lx\n", up_data);
	if (up_data) {
		saved_data = malloc(up_data);
		if (saved_data == NULL) {
			printf("Unable to save the rest of sector (%ld)\n",
				up_data);
			goto done;
		}
		memcpy(saved_data,
			(void *)((long)flash_addr + CONFIG_ENV_SIZE), up_data);
		debug("Data (start 0x%lx, len 0x%lx) saved at 0x%lx\n",
			(ulong)flash_addr + CONFIG_ENV_SIZE,
			up_data,
			(ulong)saved_data);
	}
#endif	/* CONFIG_ENV_SECT_SIZE */

	debug("Protect off %08lX ... %08lX\n", (ulong)flash_addr, end_addr);

	if (flash_sect_protect(0, (long)flash_addr, end_addr))
		goto done;

	rc = env_export(&env_new);
	if (rc)
		goto done;

	puts("Erasing Flash...");
	if (flash_sect_erase((long)flash_addr, end_addr))
		goto done;

	puts("Writing to Flash... ");
	rc = flash_write((char *)&env_new, (long)flash_addr, CONFIG_ENV_SIZE);
	if (rc != 0)
		goto perror;

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	if (up_data) {	/* restore the rest of sector */
		debug("Restoring the rest of data to 0x%lx len 0x%lx\n",
			(ulong)flash_addr + CONFIG_ENV_SIZE, up_data);
		if (flash_write(saved_data,
				(long)flash_addr + CONFIG_ENV_SIZE,
				up_data))
			goto perror;
	}
#endif
	puts("done\n");
	rc = 0;
	goto done;
perror:
	flash_perror(rc);
done:
	if (saved_data)
		free(saved_data);
	/* try to re-protect */
	flash_sect_protect(1, (long)flash_addr, end_addr);
	return rc;
}
コード例 #15
0
int do_bootloader_update_nor(uint32_t image_addr, int length,
			     uint32_t burn_addr, int failsafe)
{
#if defined(CONFIG_SYS_NO_FLASH)
	printf("ERROR: Bootloader not compiled with NOR flash support\n");
	return 1;
#else
	uint32_t failsafe_size, failsafe_top_remapped;
	uint32_t burn_addr_remapped, image_size, normal_top_remapped;
	flash_info_t *info;
	char tmp[16] __attribute__ ((unused));	/* to hold 32 bit numbers in hex */
	int sector = 0;
	bootloader_header_t *header;
	int rc;

	header = cvmx_phys_to_ptr(image_addr);

	DBGUPD("%s(0x%x, 0x%x, 0x%x, %s)\n", __func__, image_addr, length,
	       burn_addr, failsafe ? "failsafe" : "normal");
	DBGUPD("LOOKUP_STEP                0x%x\n", LOOKUP_STEP);
	DBGUPD("CFG_FLASH_BASE             0x%x\n", CONFIG_SYS_FLASH_BASE);

	/* File with rev 1.1 headers are not relocatable, so _must_ be burned
	 * at the address that they are linked at.
	 */
	if (header->maj_rev == 1 && header->min_rev == 1) {
		if (burn_addr && burn_addr != header->address) {
			printf("ERROR: specified address (0x%x) does not match "
			       "required burn address (0x%llx\n)\n",
			       burn_addr, header->address);
			return 1;
		}
		burn_addr = header->address;
	}

	/* If we have at least one bank of non-zero size, we have some NOR */
	if (!flash_info[0].size) {
		puts("ERROR: No NOR Flash detected on board, can't burn NOR "
		     "bootloader image\n");
		return 1;
	}

	/* check the burn address allignement */
	if ((burn_addr & (LOOKUP_STEP - 1)) != 0) {
		printf("Cannot programm normal image at 0x%x: address must be\n"
		       " 0x%x bytes alligned for normal boot lookup\n",
		       burn_addr, LOOKUP_STEP);
		return 1;
	}

	/* for failsage checks are easy */
	if ((failsafe) && (burn_addr != FAILSAFE_BASE)) {
		printf("ERROR: Failsafe image must be burned to address 0x%x\n",
		       FAILSAFE_BASE);
		return 1;
	}

	if (burn_addr && (burn_addr < FAILSAFE_BASE)) {
		printf("ERROR: burn address 0x%x out of boot range\n",
		       burn_addr);
		return 1;
	}

	if (!failsafe) {
#ifndef CONFIG_OCTEON_NO_FAILSAFE
		/* find out where failsafe ends */
		failsafe_size = get_image_size((bootloader_header_t *)
					       CONFIG_SYS_FLASH_BASE);
		if (failsafe_size == 0) {
			/* failsafe does not have header - assume fixed size
			 * old image
			 */
			puts("Failsafe has no valid header, assuming old image. "
			     "Using default failsafe size\n");
			failsafe_size =
			    CONFIG_SYS_NORMAL_BOOTLOADER_BASE - FAILSAFE_BASE;

			/* must default to CONFIG_SYS_NORMAL_BOOTLOADER_BASE */
			if (!burn_addr)
				burn_addr = CONFIG_SYS_NORMAL_BOOTLOADER_BASE;
			else if (CONFIG_SYS_NORMAL_BOOTLOADER_BASE != burn_addr) {
				printf("WARNING: old failsafe image will not be able to start\n"
				       "image at any address but 0x%x\n",
				       CONFIG_SYS_NORMAL_BOOTLOADER_BASE);
#ifdef ERR_ON_OLD_BASE
				return 1;
#endif
			}
		}		/* old failsafe */
#else
		failsafe_size = 0;
#endif		/* CONFIG_OCTEON_NO_FAILSAFE */

		DBGUPD("failsafe size is 0x%x\n", failsafe_size);
		DBGUPD("%s: burn address: 0x%x\n", __func__, burn_addr);
		/* Locate the next flash sector */
		failsafe_top_remapped = CONFIG_SYS_FLASH_BASE + failsafe_size;
		DBGUPD("failsafe_top_remapped 0x%x\n", failsafe_top_remapped);
		info = &flash_info[0];	/* no need to look into any other banks */
		/* scan flash bank sectors */
		for (sector = 0; sector < info->sector_count; ++sector) {
			DBGUPD("%d: 0x%lx\n", sector, info->start[sector]);
			if (failsafe_top_remapped <= info->start[sector])
				break;
		}

		if (sector == info->sector_count) {
			puts("Failsafe takes all the flash??  Can not burn normal image\n");
			return 1;
		}

		/* Move failsafe top up to the sector boundary */
		failsafe_top_remapped = info->start[sector];

		DBGUPD("Found next sector after failsafe is at remapped addr 0x%x\n",
		       failsafe_top_remapped);
		failsafe_size = failsafe_top_remapped - CONFIG_SYS_FLASH_BASE;
		DBGUPD("Alligned up failsafe size is 0x%x\n", failsafe_size);

		/* default to the first sector after the failsafe */
		if (!burn_addr) {
			burn_addr = FAILSAFE_BASE + failsafe_size;
			DBGUPD("Setting burn address to 0x%x, failsafe size: 0x%x\n",
			       burn_addr, failsafe_size);
		/* check for overlap */
		} else if (FAILSAFE_BASE + failsafe_size > burn_addr) {
			puts("ERROR: can not burn: image overlaps with failsafe\n");
			printf("burn address is 0x%x, in-flash failsafe top is 0x%x\n",
			       burn_addr, FAILSAFE_BASE + failsafe_size);
			return 1;
		}
		/* done with failsafe checks */
	}

	if (length)
		image_size = length;
	else
		image_size = get_image_size((bootloader_header_t *)image_addr);
	if (!image_size) {
		/* this is wierd case. Should never happen with good image */
		printf("ERROR: image has size field set to 0??\n");
		return 1;
	}

	/* finally check the burn address' CKSSEG limit */
	if ((burn_addr + image_size) >= (uint64_t) CKSSEG) {
		puts("ERROR: can not burn: image exceeds KSEG1 area\n");
		printf("burnadr is 0x%x, top is 0x%x\n", burn_addr,
		       burn_addr + image_size);
		return 1;
	}
	DBGUPD("burn_addr: 0x%x, image_size: 0x%x\n", burn_addr, image_size);
	/* Look up the last sector to use by the new image */
	burn_addr_remapped = burn_addr - FAILSAFE_BASE + CONFIG_SYS_FLASH_BASE;
	DBGUPD("burn_addr_remapped 0x%x\n", burn_addr_remapped);
	normal_top_remapped = burn_addr_remapped + image_size;
	/* continue flash scan - now for normal image top */
	if (failsafe)
		sector = 0;	/* is failsafe, we start from first sector here */
	for (; sector < info->sector_count; ++sector) {
		DBGUPD("%d: 0x%lx\n", sector, info->start[sector]);
		if (normal_top_remapped <= info->start[sector])
			break;
	}
	if (sector == info->sector_count) {
		puts("ERROR: not enough room in flash bank for the image??\n");
		return 1;
	}
	/* align up for environment variable set up */
	normal_top_remapped = info->start[sector];

	DBGUPD("normal_top_remapped 0x%x\n", normal_top_remapped);
	/* if there is no header (length != 0) - check burn address and
	 * give warning
	 */
	if (length && CONFIG_SYS_NORMAL_BOOTLOADER_BASE != burn_addr) {
#ifdef ERR_ON_OLD_BASE
		puts("ERROR: burning headerless image at other that defailt address\n"
		     "Image look up will not work.\n");
		printf("Default burn address: 0x%x requested burn address: 0x%x\n",
		       CONFIG_SYS_NORMAL_BOOTLOADER_BASE, burn_addr);
		return 1;
#else
		puts("WARNING: burning headerless image at other that defailt address\n"
		     "Image look up will not work.\n");
		printf("Default burn address: 0x%x requested burn address: 0x%x\n",
		       CONFIG_SYS_NORMAL_BOOTLOADER_BASE, burn_addr);
#endif
	}

	printf("Image at 0x%x is ready for burning\n", image_addr);
	printf("           Header version: %d.%d\n", header->maj_rev,
	       header->min_rev);
	printf("           Header size %d, data size %d\n", header->hlen,
	       header->dlen);
	printf("           Header crc 0x%x, data crc 0x%x\n", header->hcrc,
	       header->dcrc);
	printf("           Image link address is 0x%llx\n", header->address);
	printf("           Image burn address on flash is 0x%x\n", burn_addr);
	printf("           Image size on flash 0x%x\n",
	       normal_top_remapped - burn_addr_remapped);

	DBGUPD("burn_addr_remapped 0x%x normal_top_remapped 0x%x\n",
	       burn_addr_remapped, normal_top_remapped);
	if (flash_sect_protect(0, burn_addr_remapped, normal_top_remapped - 1)) {
		puts("Flash unprotect failed\n");
		return 1;
	}
	if (flash_sect_erase(burn_addr_remapped, normal_top_remapped - 1)) {
		puts("Flash erase failed\n");
		return 1;
	}

	puts("Copy to Flash... ");
	/* Note: Here we copy more than we should - whatever is after the image
	 * in memory gets copied to flash.
	 */
	rc = flash_write((char *)image_addr, burn_addr_remapped,
			 normal_top_remapped - burn_addr_remapped);
	if (rc != 0) {
		flash_perror(rc);
		return 1;
	}
	puts("done\n");

#ifndef CONFIG_ENV_IS_IN_NAND
	/* Erase the environment so that older bootloader will use its default
	 * environment.  This will ensure that the default
	 * 'bootloader_flash_update' macro is there.  HOWEVER, this is only
	 * useful if a legacy sized failsafe u-boot image is present.
	 * If a new larger failsafe is present, then that macro will be incorrect
	 * and will erase part of the failsafe.
	 * The 1.9.0 u-boot needs to have its link address and
	 * normal_bootloader_size/base modified to work with this...
	 */
	if (header->maj_rev == 1 && header->min_rev == 1) {
		puts("Erasing environment due to u-boot downgrade.\n");
		flash_sect_protect(0, CONFIG_ENV_ADDR,
				   CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1);
		if (flash_sect_erase
		    (CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1)) {
			puts("Environment erase failed\n");
			return 1;
		}

	}
#endif
	return 0;
#endif
}
コード例 #16
0
ファイル: cmd_mem.c プロジェクト: Biamp-Systems/mb-u-boot
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4) {
		cmd_usage(cmdtp);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CONFIG_SYS_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;
		int i, diff;
		int step = 131072; //arbitrary value - 
		//found to be good for gauging time in flash transfer

		puts ("Copy to Flash...\n");
		
		/*rc = flash_write ((char *)addr, dest, count*size);
		if(rc != 0){
		        flash_perror (rc);
			return (1); 
		}
		*/
		for(i = 0; i < count; i+= step*size) {
		        if((diff = (count - i)) >= step*size) {
		                rc = flash_write ((char *)addr+i*size, 
						  dest+i*size, step*size);
			} else {
			        rc = flash_write ((char *)addr+i*size, 
						  dest+i*size, diff*size);
			}
			if (rc != 0) {
			        flash_perror (rc);
				return (1);
			}
			puts (".");
		}
		puts (" done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
				 && (addr2info(dest) == NULL)
#endif
	   ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #17
0
ファイル: cmd_mem.c プロジェクト: TeXniKK/silverstore-uboot
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CFG_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(addr))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");
#if defined(CONFIG_MARVELL)
		/* If source addr is flash copy data to memory first */
		if (addr2info(addr) != NULL)
		{       char* tmp_buff;
			int i;
			if (NULL == (tmp_buff = malloc(count*size)))
			{
				puts (" Copy fail, NULL pointer buffer\n");
				return (1);
			}
			for( i = 0 ; i < (count*size); i++)
				*(tmp_buff + i) = *((char *)addr + i);

			rc = flash_write (tmp_buff, dest, count*size);
			free(tmp_buff);
		}
		else
#endif /* defined(CONFIG_MARVELL) */
			rc = flash_write ((char *)addr, dest, count*size);

		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#if (CONFIG_COMMANDS & CFG_CMD_MMC)
	if (mmc2info(dest)) {
		int rc;

		puts ("Copy to MMC... ");
		switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}

	if (mmc2info(addr)) {
		int rc;

		puts ("Copy from MMC... ");
		switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #18
0
static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	ulong	addr, dest, count, bytes;
	int	size;
	const void *src;
	void *buf;

	if (argc != 4)
		return CMD_RET_USAGE;

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CONFIG_SYS_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");

		rc = flash_write ((char *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
				 && (addr2info(dest) == NULL)
#endif
	   ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

	bytes = size * count;
	buf = map_sysmem(dest, bytes);
	src = map_sysmem(addr, bytes);
	while (count-- > 0) {
		if (size == 4)
			*((u32 *)buf) = *((u32  *)src);
#ifdef CONFIG_SYS_SUPPORT_64BIT_DATA
		else if (size == 8)
			*((u64 *)buf) = *((u64 *)src);
#endif
		else if (size == 2)
			*((u16 *)buf) = *((u16 *)src);
		else
			*((u8 *)buf) = *((u8 *)src);
		src += size;
		buf += size;

		/* reset watchdog from time to time */
		if ((count % (64 << 10)) == 0)
			WATCHDOG_RESET();
	}
	unmap_sysmem(buf);
	unmap_sysmem(src);

	return 0;
}
コード例 #19
0
int do_dma_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count , tempaddr;
	int	size;
	unsigned int ChannelNo;
	


	struct dma_device_cfg configuration = {
		MEMORY_DMA_REQ,
		(DMA_WRAP_1|DMA_BURST_8|DMA_SIZE_32|DMA_SG_MODE|DMA_SW_REQ),
		Source1,
		Destination1,
	} ;

	
	if (argc != 4) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

	count *= size;
	
#ifndef CFG_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(addr))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");

		rc = flash_write ((char *)addr, dest, count);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

	init_dma();
	if(addr >= 0xFE000000){
	    *(volatile unsigned int *)(0xD8330000) = 0x33013301;
    	*(volatile unsigned int *)(0xD8330008) = 0x10004;
	    *(volatile unsigned int *)(0xD8330010) = 0x10004;
    	*(volatile unsigned int *)(0xD8330020) = 0x809;
	    *(volatile unsigned int *)(0xD8330028) = 0x809;	
	    request_dma(&ChannelNo, "dmacp", I2S_TX_DMA_REQ);
	}
	else
    	request_dma(&ChannelNo, "dmacp", MEMORY_DMA_REQ);
    if(addr >= 0xFE000000){
        configuration.DeviceReqType = I2S_TX_DMA_REQ;
		configuration.DefaultCCR = (DMA_WRAP_1|DMA_BURST_8|DMA_SIZE_32|DMA_SG_MODE|DMA_UP_MEMREG_EN|DEVICE_TO_MEM);
		tempaddr = addr;
		addr = dest;
		dest = tempaddr;
    }
    init_descriptstack(ChannelNo);
	setup_dma(ChannelNo, configuration);
	
	//printf("ISR ch%d = %x\n", ChannelNo, pDma_Reg->DMA_ISR);
	//printf("IER ch%d = %x\n", ChannelNo, pDma_Reg->DMA_IER);
	//printf("CCR ch%d = %x\n", ChannelNo, pDma_Reg->DMA_CCR_CH[ChannelNo]);

	//{
	//    start_dma(ChannelNo, (unsigned long)addr, (unsigned long)dest, count);
    //    printf("DMA%d : handle irq begin\n", ChannelNo);
    //    handle_dma_irq(ChannelNo);
    //    printf("DMA%d : handle irq OK\n", ChannelNo);
    /*******************************************
	* wait for dma transfer complete and terminal count
	********************************************/
	//    while (1) {
	//	    if (dma_busy(ChannelNo) != 1)
	//		    break;
    //	}
	//    printf("DMA%d : no busy\n", ChannelNo);
    //	while (1) {
	//    	if (dma_complete(ChannelNo) == 0)
	//	    	break;
    //	}
	//}
    handle_transfer(ChannelNo, (unsigned long)addr, (unsigned long)dest, count);
    reset_descriptstack(ChannelNo);
    printf("DMA%d : transfer OK\n", ChannelNo);
	return 0;
}
コード例 #20
0
ファイル: env_flash.c プロジェクト: IngenicC/u-boot
int saveenv(void)
{
	env_t	env_new;
	ssize_t	len;
	int	rc = 1;
	char	*res;
	char	*saved_data = NULL;
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	ulong	up_data = 0;

	up_data = (end_addr + 1 - ((long)flash_addr + CONFIG_ENV_SIZE));
	debug("Data to save 0x%lx\n", up_data);
	if (up_data) {
		if ((saved_data = malloc(up_data)) == NULL) {
			printf("Unable to save the rest of sector (%ld)\n",
				up_data);
			goto done;
		}
		memcpy(saved_data,
			(void *)((long)flash_addr + CONFIG_ENV_SIZE), up_data);
		debug("Data (start 0x%lx, len 0x%lx) saved at 0x%lx\n",
			(ulong)flash_addr + CONFIG_ENV_SIZE,
			up_data,
			(ulong)saved_data);
	}
#endif	/* CONFIG_ENV_SECT_SIZE */

	debug("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr, end_addr);

	if (flash_sect_protect(0, (long)flash_addr, end_addr))
		goto done;

	res = (char *)&env_new.data;
	len = hexport_r(&env_htab, '\0', &res, ENV_SIZE);
	if (len < 0) {
		error("Cannot export environment: errno = %d\n", errno);
		goto done;
	}
	env_new.crc = crc32(0, env_new.data, ENV_SIZE);

	puts("Erasing Flash...");
	if (flash_sect_erase((long)flash_addr, end_addr))
		goto done;

	puts("Writing to Flash... ");
	rc = flash_write((char *)&env_new, (long)flash_addr, CONFIG_ENV_SIZE);
	if (rc != 0) {
		flash_perror(rc);
		goto done;
	}
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	if (up_data) {	/* restore the rest of sector */
		debug("Restoring the rest of data to 0x%lx len 0x%lx\n",
			(ulong)flash_addr + CONFIG_ENV_SIZE, up_data);
		if (flash_write(saved_data,
				(long)flash_addr + CONFIG_ENV_SIZE,
				up_data)) {
			flash_perror(rc);
			goto done;
		}
	}
#endif
	puts("done\n");
	rc = 0;
done:
	if (saved_data)
		free(saved_data);
	/* try to re-protect */
	(void) flash_sect_protect(1, (long)flash_addr, end_addr);
	return rc;
}
コード例 #21
0
ファイル: env_flash.c プロジェクト: IngenicC/u-boot
int saveenv(void)
{
	env_t	env_new;
	ssize_t	len;
	char	*saved_data = NULL;
	char	*res;
	int	rc = 1;
	char	flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	ulong	up_data = 0;
#endif

	debug("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr, end_addr);

	if (flash_sect_protect(0, (ulong)flash_addr, end_addr)) {
		goto done;
	}

	debug("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr_new, end_addr_new);

	if (flash_sect_protect(0, (ulong)flash_addr_new, end_addr_new)) {
		goto done;
	}

	res = (char *)&env_new.data;
	len = hexport_r(&env_htab, '\0', &res, ENV_SIZE);
	if (len < 0) {
		error("Cannot export environment: errno = %d\n", errno);
		goto done;
	}
	env_new.crc   = crc32(0, env_new.data, ENV_SIZE);
	env_new.flags = new_flag;

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	up_data = (end_addr_new + 1 - ((long)flash_addr_new + CONFIG_ENV_SIZE));
	debug("Data to save 0x%lX\n", up_data);
	if (up_data) {
		if ((saved_data = malloc(up_data)) == NULL) {
			printf("Unable to save the rest of sector (%ld)\n",
				up_data);
			goto done;
		}
		memcpy(saved_data,
			(void *)((long)flash_addr_new + CONFIG_ENV_SIZE), up_data);
		debug("Data (start 0x%lX, len 0x%lX) saved at 0x%p\n",
			(long)flash_addr_new + CONFIG_ENV_SIZE,
			up_data, saved_data);
	}
#endif
	puts("Erasing Flash...");
	debug(" %08lX ... %08lX ...",
		(ulong)flash_addr_new, end_addr_new);

	if (flash_sect_erase((ulong)flash_addr_new, end_addr_new)) {
		goto done;
	}

	puts("Writing to Flash... ");
	debug(" %08lX ... %08lX ...",
		(ulong)&(flash_addr_new->data),
		sizeof(env_ptr->data)+(ulong)&(flash_addr_new->data));
	if ((rc = flash_write((char *)&env_new,
			(ulong)flash_addr_new,
			sizeof(env_new))) ||
	    (rc = flash_write(&flag,
			(ulong)&(flash_addr->flags),
			sizeof(flash_addr->flags))) ) {
		flash_perror(rc);
		goto done;
	}

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	if (up_data) { /* restore the rest of sector */
		debug("Restoring the rest of data to 0x%lX len 0x%lX\n",
			(long)flash_addr_new + CONFIG_ENV_SIZE, up_data);
		if (flash_write(saved_data,
				(long)flash_addr_new + CONFIG_ENV_SIZE,
				up_data)) {
			flash_perror(rc);
			goto done;
		}
	}
#endif
	puts("done\n");

	{
		env_t * etmp = flash_addr;
		ulong ltmp = end_addr;

		flash_addr = flash_addr_new;
		flash_addr_new = etmp;

		end_addr = end_addr_new;
		end_addr_new = ltmp;
	}

	rc = 0;
done:
	if (saved_data)
		free(saved_data);
	/* try to re-protect */
	(void) flash_sect_protect(1, (ulong)flash_addr, end_addr);
	(void) flash_sect_protect(1, (ulong)flash_addr_new, end_addr_new);

	return rc;
}
コード例 #22
0
ファイル: cmd_mem.c プロジェクト: DentonGentry/gfiber-gfrg100
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4) {
		cmd_usage(cmdtp);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CONFIG_SYS_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");
#if 0
#if defined(CONFIG_MARVELL)
		/* If source addr is flash copy data to memory first */
		if (addr2info(addr) != NULL)
		{       char* tmp_buff;
			int i;
			if (NULL == (tmp_buff = malloc(count*size)))
			{
				puts (" Copy fail, NULL pointer buffer\n");
				return (1);
			}
			for( i = 0 ; i < (count*size); i++)
				*(tmp_buff + i) = *((char *)addr + i);

			rc = flash_write (tmp_buff, dest, count*size);
			free(tmp_buff);
		}
		else
#endif /* defined(CONFIG_MARVELL) */
#endif
		rc = flash_write ((char *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
				 && (addr2info(dest) == NULL)
#endif
	   ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #23
0
ファイル: cmd_mem.c プロジェクト: 8devices/u-boot
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr = 0, dest = 0, count = 0;
	int	size;

	if(!memcmp(argv[0],"cp.linux",sizeof("cp.linux")))
	{
/* 8M/16 flash:
 *  -write linux kernel and file system separately
 *  -kernel starts at PHYS_FLASH_1 and file system starts at PHYS_FLASH_2
 */
#if (defined (RT2880_ASIC_BOARD) || defined (RT2880_FPGA_BOARD) || defined (RT3052_MP1)) && (defined ON_BOARD_8M_FLASH_COMPONENT || defined ON_BOARD_16M_FLASH_COMPONENT)
		int rc;
		ulong kernsz = 0x3B0000;

		addr += base_address;
		addr += CFG_LOAD_ADDR;
		dest = dest + CFG_KERN_ADDR + base_address;
		if (NetBootFileXferSize <= kernsz)
			count = NetBootFileXferSize;
		else
			count = kernsz;
		size = 1;

		printf("\n Copy linux image[%d byte] to Flash[0x%08X].... \n",count,dest);
		puts ("Copy to Flash... ");
		printf ("\n Copy %d bytes to Flash... ", count);

		rc = flash_write ((uchar *)addr, dest, count);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		if (count < kernsz)
			return 0;

		addr += kernsz;
		dest = PHYS_FLASH_2;
		count = NetBootFileXferSize - kernsz;
		printf("\n Copy linux file system[%d byte] to Flash[0x%08X].... \n",count,dest);
		puts ("Copy to Flash... ");
		printf ("\n Copy %d bytes to Flash... ", count);

		rc = flash_write ((uchar *)addr, dest, count);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}

		puts ("done\n");
		return 0;
#endif
		addr += base_address;
		addr += CFG_LOAD_ADDR;
		dest = dest + CFG_KERN_ADDR + base_address;
		printf("\n Copy linux image[%d byte] to Flash[0x%08X].... \n",NetBootFileXferSize,dest);
		count = NetBootFileXferSize;
		size = 1;
		goto RT2880_START_WRITE_FLASH;
	}
/* flash layout remove cramfs, by bruce */
/*
	else if(!memcmp(argv[0],"cp.cramfs",sizeof("cp.cramfs")))
	{
		addr += base_address;
		addr += CFG_LOAD_ADDR;
		dest = dest + 0xBC530000 + base_address;
		printf("\n Copy File System image[%d byte] to Flash[0x%08X].... \n",NetBootFileXferSize,dest);
		
		count = NetBootFileXferSize;
		size = 1;
		goto RT2880_START_WRITE_FLASH;
	}
*/
	else if(!memcmp(argv[0],"cp.uboot",sizeof("cp.uboot")))
	{
		addr += base_address;
		addr += CFG_LOAD_ADDR;
		dest = dest + CFG_FLASH_BASE + base_address;
		printf("\n Copy uboot[%d byte] to Flash[0x%08X].... \n",NetBootFileXferSize,dest);
		
		count = NetBootFileXferSize;
		size = 1;
		goto RT2880_START_WRITE_FLASH;
	}
	
	if (argc != 4) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}
	
	/* Check for size specification. */
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
	{
		puts (" cmd error\n");
		return 1;
	}	

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

RT2880_START_WRITE_FLASH:
		
	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CFG_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(addr))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");
		printf ("\n Copy %d byte to Flash... ",count*size);

		rc = flash_write ((uchar *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#if (CONFIG_COMMANDS & CFG_CMD_MMC)
	if (mmc2info(dest)) {
		int rc;

		puts ("Copy to MMC... ");
		switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}

	if (mmc2info(addr)) {
		int rc;

		puts ("Copy from MMC... ");
		switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #24
0
ファイル: cmd_mem.c プロジェクト: tijs14tijs/u-boot
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4) {
		cmd_usage(cmdtp);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CONFIG_SYS_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");

		rc = flash_write ((char *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest)
#ifndef CONFIG_SYS_NO_FLASH
				 && (addr2info(dest) == NULL)
#endif
	   ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

#ifdef CONFIG_SPIFI
	if (spifi_addr(dest) || spifi_addr(dest + count)) {
		if (spifi_addr(addr) || spifi_addr(addr + count)) {
			puts ("Cannot copy from SPIFI to SPIFI, aborting.\n\r");
			return 1;
		}
		if (!spifi_addr(dest) || !spifi_addr(dest + count)) {
			puts ("Cannot copy across SPIFI boundaries, aborting.\n\r");
			return 1;
		}
		return spifi_write(dest, (void *)addr, count);
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #25
0
ファイル: cmd_mem.c プロジェクト: CharlieWood/uboot-imx
int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
	ulong	addr, dest, count;
	int	size;

	if (argc != 4) {
		printf ("Usage:\n%s\n", cmdtp->usage);
		return 1;
	}

	/* Check for size specification.
	*/
	if ((size = cmd_get_data_size(argv[0], 4)) < 0)
		return 1;

	addr = simple_strtoul(argv[1], NULL, 16);
	addr += base_address;

	dest = simple_strtoul(argv[2], NULL, 16);
	dest += base_address;

	count = simple_strtoul(argv[3], NULL, 16);

	if (count == 0) {
		puts ("Zero length ???\n");
		return 1;
	}

#ifndef CFG_NO_FLASH
	/* check if we are copying to Flash */
	if ( (addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
	   && (!addr_dataflash(dest))
#endif
	   ) {
		int rc;

		puts ("Copy to Flash... ");

		rc = flash_write ((char *)addr, dest, count*size);
		if (rc != 0) {
			flash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}
#endif

#if defined(CONFIG_CMD_MMC)
	if (mmc2info(dest)) {
		int rc;

		puts ("Copy to MMC... ");
		switch (rc = mmc_write ((uchar *)addr, dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}

	if (mmc2info(addr)) {
		int rc;

		puts ("Copy from MMC... ");
		switch (rc = mmc_read (addr, (uchar *)dest, count*size)) {
		case 0:
			putc ('\n');
			return 1;
		case -1:
			puts ("failed\n");
			return 1;
		default:
			printf ("%s[%d] FIXME: rc=%d\n",__FILE__,__LINE__,rc);
			return 1;
		}
		puts ("done\n");
		return 0;
	}
#endif

#ifdef CONFIG_HAS_DATAFLASH
	/* Check if we are copying from RAM or Flash to DataFlash */
	if (addr_dataflash(dest) && !addr_dataflash(addr)){
		int rc;

		puts ("Copy to DataFlash... ");

		rc = write_dataflash (dest, addr, count*size);

		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		puts ("done\n");
		return 0;
	}

	/* Check if we are copying from DataFlash to RAM */
	if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
		int rc;
		rc = read_dataflash(addr, count * size, (char *) dest);
		if (rc != 1) {
			dataflash_perror (rc);
			return (1);
		}
		return 0;
	}

	if (addr_dataflash(addr) && addr_dataflash(dest)){
		puts ("Unsupported combination of source/destination.\n\r");
		return 1;
	}
#endif

#ifdef CONFIG_BLACKFIN
	/* See if we're copying to/from L1 inst */
	if (addr_bfin_on_chip_mem(dest) || addr_bfin_on_chip_mem(addr)) {
		memcpy((void *)dest, (void *)addr, count * size);
		return 0;
	}
#endif

	while (count-- > 0) {
		if (size == 4)
			*((ulong  *)dest) = *((ulong  *)addr);
		else if (size == 2)
			*((ushort *)dest) = *((ushort *)addr);
		else
			*((u_char *)dest) = *((u_char *)addr);
		addr += size;
		dest += size;
	}
	return 0;
}
コード例 #26
0
ファイル: env_flash.c プロジェクト: 0xFelix/u-boot-edminiv2
int saveenv(void)
{
	env_t	env_new;
	char	*saved_data = NULL;
	char	flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
	int	rc = 1;
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	ulong	up_data = 0;
#endif

	debug("Protect off %08lX ... %08lX\n", (ulong)flash_addr, end_addr);

	if (flash_sect_protect(0, (ulong)flash_addr, end_addr))
		goto done;

	debug("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr_new, end_addr_new);

	if (flash_sect_protect(0, (ulong)flash_addr_new, end_addr_new))
		goto done;

	rc = env_export(&env_new);
	if (rc)
		return rc;
	env_new.flags	= new_flag;

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	up_data = end_addr_new + 1 - ((long)flash_addr_new + CONFIG_ENV_SIZE);
	debug("Data to save 0x%lX\n", up_data);
	if (up_data) {
		saved_data = malloc(up_data);
		if (saved_data == NULL) {
			printf("Unable to save the rest of sector (%ld)\n",
				up_data);
			goto done;
		}
		memcpy(saved_data,
			(void *)((long)flash_addr_new + CONFIG_ENV_SIZE),
			up_data);
		debug("Data (start 0x%lX, len 0x%lX) saved at 0x%p\n",
			(long)flash_addr_new + CONFIG_ENV_SIZE,
			up_data, saved_data);
	}
#endif
	puts("Erasing Flash...");
	debug(" %08lX ... %08lX ...", (ulong)flash_addr_new, end_addr_new);

	if (flash_sect_erase((ulong)flash_addr_new, end_addr_new))
		goto done;

	puts("Writing to Flash... ");
	debug(" %08lX ... %08lX ...",
		(ulong)&(flash_addr_new->data),
		sizeof(env_ptr->data) + (ulong)&(flash_addr_new->data));
	rc = flash_write((char *)&env_new, (ulong)flash_addr_new,
			 sizeof(env_new));
	if (rc)
		goto perror;

	rc = flash_write(&flag, (ulong)&(flash_addr->flags),
			 sizeof(flash_addr->flags));
	if (rc)
		goto perror;

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	if (up_data) { /* restore the rest of sector */
		debug("Restoring the rest of data to 0x%lX len 0x%lX\n",
			(long)flash_addr_new + CONFIG_ENV_SIZE, up_data);
		if (flash_write(saved_data,
				(long)flash_addr_new + CONFIG_ENV_SIZE,
				up_data))
			goto perror;
	}
#endif
	puts("done\n");

	{
		env_t *etmp = flash_addr;
		ulong ltmp = end_addr;

		flash_addr = flash_addr_new;
		flash_addr_new = etmp;

		end_addr = end_addr_new;
		end_addr_new = ltmp;
	}

	rc = 0;
	goto done;
perror:
	flash_perror(rc);
done:
	if (saved_data)
		free(saved_data);
	/* try to re-protect */
	flash_sect_protect(1, (ulong)flash_addr, end_addr);
	flash_sect_protect(1, (ulong)flash_addr_new, end_addr_new);

	return rc;
}
コード例 #27
0
ファイル: cmd_mem64.c プロジェクト: jhbsz/u-boot-cavium
int do_mem_cp64 ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
    uint64_t	addr, dest, count;
    int		size;

    if (argc != 4)
        return CMD_RET_USAGE;

    /* Check for size specification.
    */
    if ((size = cmd_get_data_size(argv[0], 8)) < 0)
        return 1;

    addr = simple_strtoull(argv[1], NULL, 16);
    addr |= base_address64;

    dest = simple_strtoull(argv[2], NULL, 16);
    dest |= base_address64;

    count = simple_strtoull(argv[3], NULL, 16);

    if (count == 0) {
        puts ("Zero length ???\n");
        return 1;
    }

#ifndef CONFIG_SYS_NO_FLASH
    /* check if we are copying to Flash */
    if ( (dest < 0xc0000000 && addr2info(dest) != NULL)
#ifdef CONFIG_HAS_DATAFLASH
            && (!addr_dataflash(dest))
#endif
       ) {
        int rc;

        if (addr + count >= 0x100000000ull) {
            puts("Source address too high to copy to flash\n");
            return 1;
        }
        puts ("Copy to Flash... ");

        rc = flash_write ((char *)((uint32_t)addr), (uint32_t)dest,
                          count * size);
        if (rc != 0) {
            flash_perror (rc);
            return (1);
        }
        puts ("done\n");
        return 0;
    }
#endif

#ifdef CONFIG_HAS_DATAFLASH
    /* Check if we are copying from RAM or Flash to DataFlash */
    if ((dest < 0xc0000000) &&
            addr_dataflash((uint32_t)dest) && !addr_dataflash((uint32_t)addr)) {
        int rc;

        if (addr + count >= 0x100000000ull) {
            puts("Source address is too high to copy to flash\n");
            return 1;
        }
        puts ("Copy to DataFlash... ");

        rc = write_dataflash (dest, addr, count*size);

        if (rc != 1) {
            dataflash_perror (rc);
            return (1);
        }
        puts ("done\n");
        return 0;
    }

    /* Check if we are copying from DataFlash to RAM */
    if ((addr < 0xc0000000) && addr_dataflash((uint32_t)addr) &&
            (dest + count < 0x100000000ull) && !addr_dataflash((uint32_t)dest)
#ifndef CONFIG_SYS_NO_FLASH
            && (addr2info((uint32_t)dest) == NULL)
#endif
       ) {
        int rc;
        rc = read_dataflash((uint32_t)addr, count * size,
                            (char *)((uint32_t)dest));
        if (rc != 1) {
            dataflash_perror (rc);
            return (1);
        }
        return 0;
    }

    if ((addr | dest) < 0x10000000ull &&
            addr_dataflash(addr) && addr_dataflash(dest)) {
        puts ("Unsupported combination of source/destination.\n\r");
        return 1;
    }
#endif

    while (count-- > 0) {
        if (size == 8)
            cvmx_write_csr(dest, cvmx_read_csr(addr));
        else if (size == 4)
            cvmx_write64_uint32(dest, cvmx_read64_uint32(addr));
        else if (size == 2)
            cvmx_write64_uint16(dest, cvmx_read64_uint16(addr));
        else
            cvmx_write64_uint8(dest, cvmx_read64_uint8(addr));
        addr += size;
        dest += size;

        /* reset watchdog from time to time */
        if ((count % (64 << 10)) == 0)
            WATCHDOG_RESET();
    }
    return 0;
}
コード例 #28
0
ファイル: cmd_mem.c プロジェクト: fangsheng009/u-boot_mod
int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
	ulong addr, dest, count;
	int size;

	if(argc != 4){
#ifdef CFG_LONGHELP
		if(cmdtp->help != NULL){
			printf("Usage:\n%s %s\n", cmdtp->name, cmdtp->help);
		} else {
			printf("Usage:\n%s %s\n", cmdtp->name, cmdtp->usage);
		}
#else
		printf("Usage:\n%s %s\n", cmdtp->name, cmdtp->usage);
#endif
		return(1);
	}

	/*
	 * Check for size specification.
	 */
	if((size = cmd_get_data_size(argv[0], 4)) < 0){
		return(1);
	}

	addr  = simple_strtoul(argv[1], NULL, 16);
	dest  = simple_strtoul(argv[2], NULL, 16);
	count = simple_strtoul(argv[3], NULL, 16);

	if(count == 0){
		puts("## Error: zero length?\n");
		return(1);
	}

#ifndef CFG_NO_FLASH
	/* check if we are copying to Flash */
	if(addr2info(dest) != NULL){
		int rc;

		puts("Copying to flash...\n");

		rc = flash_write((char *)addr, dest, count * size);

		if(rc != 0){
			flash_perror(rc);
			return(1);
		}

		puts("Done!\n\n");
		return(0);
	}
#endif

	while(count-- > 0){
		if(size == 4){
			*((ulong *)dest) = *((ulong *)addr);
		} else if(size == 2){
			*((ushort *)dest) = *((ushort *)addr);
		} else {
			*((u_char *)dest) = *((u_char *)addr);
		}
		addr += size;
		dest += size;
	}

	return(0);
}
コード例 #29
0
ファイル: env_flash.c プロジェクト: avmwww/u-boot
int saveenv(void)
{
	char *saved_data = NULL;
	int rc = 1;
	char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	ulong up_data = 0;
#endif

	debug ("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr, end_addr);

	if (flash_sect_protect (0, (ulong)flash_addr, end_addr)) {
		goto Done;
	}

	debug ("Protect off %08lX ... %08lX\n",
		(ulong)flash_addr_new, end_addr_new);

	if (flash_sect_protect (0, (ulong)flash_addr_new, end_addr_new)) {
		goto Done;
	}

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	up_data = (end_addr_new + 1 - ((long)flash_addr_new + CONFIG_ENV_SIZE));
	debug ("Data to save 0x%x\n", up_data);
	if (up_data) {
		if ((saved_data = malloc(up_data)) == NULL) {
			printf("Unable to save the rest of sector (%ld)\n",
				up_data);
			goto Done;
		}
		memcpy(saved_data,
			(void *)((long)flash_addr_new + CONFIG_ENV_SIZE), up_data);
		debug ("Data (start 0x%x, len 0x%x) saved at 0x%x\n",
			   (long)flash_addr_new + CONFIG_ENV_SIZE,
				up_data, saved_data);
	}
#endif
	puts ("Erasing Flash...");
	debug (" %08lX ... %08lX ...",
		(ulong)flash_addr_new, end_addr_new);

	if (flash_sect_erase ((ulong)flash_addr_new, end_addr_new)) {
		goto Done;
	}

	puts ("Writing to Flash... ");
	debug (" %08lX ... %08lX ...",
		(ulong)&(flash_addr_new->data),
		sizeof(env_ptr->data)+(ulong)&(flash_addr_new->data));
	if ((rc = flash_write((char *)env_ptr->data,
			(ulong)&(flash_addr_new->data),
			sizeof(env_ptr->data))) ||
	    (rc = flash_write((char *)&(env_ptr->crc),
			(ulong)&(flash_addr_new->crc),
			sizeof(env_ptr->crc))) ||
	    (rc = flash_write(&flag,
			(ulong)&(flash_addr->flags),
			sizeof(flash_addr->flags))) ||
	    (rc = flash_write(&new_flag,
			(ulong)&(flash_addr_new->flags),
			sizeof(flash_addr_new->flags))))
	{
		flash_perror (rc);
		goto Done;
	}
	puts ("done\n");

#if CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE
	if (up_data) { /* restore the rest of sector */
		debug ("Restoring the rest of data to 0x%x len 0x%x\n",
			   (long)flash_addr_new + CONFIG_ENV_SIZE, up_data);
		if (flash_write(saved_data,
				(long)flash_addr_new + CONFIG_ENV_SIZE,
				up_data)) {
			flash_perror(rc);
			goto Done;
		}
	}
#endif
	{
		env_t * etmp = flash_addr;
		ulong ltmp = end_addr;

		flash_addr = flash_addr_new;
		flash_addr_new = etmp;

		end_addr = end_addr_new;
		end_addr_new = ltmp;
	}

	rc = 0;
Done:

	if (saved_data)
		free (saved_data);
	/* try to re-protect */
	(void) flash_sect_protect (1, (ulong)flash_addr, end_addr);
	(void) flash_sect_protect (1, (ulong)flash_addr_new, end_addr_new);

	return rc;
}