コード例 #1
0
ファイル: integrator_cp.c プロジェクト: 250bpm/linux
static void __init intcp_init_irq(void)
{
	u32 pic_mask, cic_mask, sic_mask;

	/* These masks are for the HW IRQ registers */
	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
	pic_mask |= (~((~0u) << (29 - 22))) << 22;
	cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));

	/*
	 * Disable all interrupt sources
	 */
	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);

	fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
		      -1, pic_mask, NULL);

	fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
		      -1, cic_mask, NULL);

	fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
		      IRQ_CP_CPPLDINT, sic_mask, NULL);
}
コード例 #2
0
static void __init intcp_init_irq(void)
{
	u32 pic_mask, sic_mask;

	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
	pic_mask |= (~((~0u) << (29 - 22))) << 22;
	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));

	/*
	 * Disable all interrupt sources
	 */
	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);

	fpga_irq_init(-1, pic_mask, &pic_irq_data);

	fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)),
		&cic_irq_data);

	fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data);
}
コード例 #3
0
ファイル: core.c プロジェクト: 01org/KVMGT-kernel
void __init versatile_init_irq(void)
{
	struct device_node *np;

	np = of_find_matching_node_by_address(NULL, vic_of_match,
					      VERSATILE_VIC_BASE);
	__vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);

	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);

	np = of_find_matching_node_by_address(NULL, sic_of_match,
					      VERSATILE_SIC_BASE);

	fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
		IRQ_VICSOURCE31, PIC_VALID, np);

	/*
	 * Interrupts on secondary controller from 0 to 8 are routed to
	 * source 31 on PIC.
	 * Interrupts from 21 to 31 are routed directly to the VIC on
	 * the corresponding number on primary controller. This is controlled
	 * by setting PIC_ENABLEx.
	 */
	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
}
コード例 #4
0
int __init fpga_irq_of_init(struct device_node *node,
			    struct device_node *parent)
{
	void __iomem *base;
	u32 clear_mask;
	u32 valid_mask;

	if (WARN_ON(!node))
		return -ENODEV;

	base = of_iomap(node, 0);
	WARN(!base, "unable to map fpga irq registers\n");

	if (of_property_read_u32(node, "clear-mask", &clear_mask))
		clear_mask = 0;

	if (of_property_read_u32(node, "valid-mask", &valid_mask))
		valid_mask = 0;

	fpga_irq_init(base, node->name, 0, -1, valid_mask, node);

	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
	writel(clear_mask, base + FIQ_ENABLE_CLEAR);

	return 0;
}
コード例 #5
0
ファイル: integrator_ap.c プロジェクト: 5victor/linux
static void __init ap_init_irq(void)
{
	/* Disable all interrupts initially. */
	/* Do the core module ones */
	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);

	/* do the header card stuff next */
	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);

	fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data);
}
コード例 #6
0
static void __init ap_init_irq(void)
{
	/*                                   */
	/*                         */
	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);

	/*                               */
	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);

	fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data);
}
コード例 #7
0
ファイル: integrator_ap.c プロジェクト: 03199618/linux
static void __init ap_init_irq(void)
{
	/* Disable all interrupts initially. */
	/* Do the core module ones */
	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);

	/* do the header card stuff next */
	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);

	fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
		-1, INTEGRATOR_SC_VALID_INT, NULL);
	integrator_clk_init(false);
}
コード例 #8
0
ファイル: irq-versatile-fpga.c プロジェクト: remtcs/xvisor
static int __init fpga_init(struct vmm_devtree_node *node)
{
    int rc;
    virtual_addr_t base;
    u32 clear_mask;
    u32 valid_mask;
    u32 picen_mask;
    u32 irq_start;
    u32 parent_irq;

    BUG_ON(!vmm_smp_is_bootcpu());

    rc = vmm_devtree_request_regmap(node, &base, 0, "Versatile SIC");
    WARN(rc, "unable to map fpga irq registers\n");

    if (vmm_devtree_read_u32(node, "irq_start", &irq_start)) {
        irq_start = 0;
    }

    if (vmm_devtree_read_u32(node, "clear-mask", &clear_mask)) {
        clear_mask = 0;
    }

    if (vmm_devtree_read_u32(node, "valid-mask", &valid_mask)) {
        valid_mask = 0;
    }

    /* Some chips are cascaded from a parent IRQ */
    if (vmm_devtree_irq_get(node, &parent_irq, 0)) {
        parent_irq = 0xFFFFFFFF;
    }

    fpga_irq_init((void *)base, "FPGA",
                  irq_start, parent_irq,
                  valid_mask, node);

    vmm_writel(clear_mask, (void *)base + IRQ_ENABLE_CLEAR);
    vmm_writel(clear_mask, (void *)base + FIQ_ENABLE_CLEAR);

    /* For VersatilePB, we have interrupts from 21 to 31 capable
     * of being routed directly to the parent interrupt controller
     * (i.e. VIC). This is controlled by setting PIC_ENABLEx.
     */
    if (!vmm_devtree_read_u32(node, "picen-mask", &picen_mask)) {
        vmm_writel(picen_mask, (void *)base + PICEN_SET);
    }

    return 0;
}
コード例 #9
0
ファイル: core.c プロジェクト: IngenicC/linux-linaro-natty
void __init versatile_init_irq(void)
{
	vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);

	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);

	fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);

	/*
	 * Interrupts on secondary controller from 0 to 8 are routed to
	 * source 31 on PIC.
	 * Interrupts from 21 to 31 are routed directly to the VIC on
	 * the corresponding number on primary controller. This is controlled
	 * by setting PIC_ENABLEx.
	 */
	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
}
コード例 #10
0
int __init fpga_irq_of_init(struct device_node *node,
			    struct device_node *parent)
{
	void __iomem *base;
	u32 clear_mask;
	u32 valid_mask;
	int parent_irq;

	if (WARN_ON(!node))
		return -ENODEV;

	base = of_iomap(node, 0);
	WARN(!base, "unable to map fpga irq registers\n");

	if (of_property_read_u32(node, "clear-mask", &clear_mask))
		clear_mask = 0;

	if (of_property_read_u32(node, "valid-mask", &valid_mask))
		valid_mask = 0;

	/* Some chips are cascaded from a parent IRQ */
	parent_irq = irq_of_parse_and_map(node, 0);
	if (!parent_irq) {
		set_handle_irq(fpga_handle_irq);
		parent_irq = -1;
	}

	fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);

	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
	writel(clear_mask, base + FIQ_ENABLE_CLEAR);

	/*
	 * On Versatile AB/PB, some secondary interrupts have a direct
	 * pass-thru to the primary controller for IRQs 20 and 22-31 which need
	 * to be enabled. See section 3.10 of the Versatile AB user guide.
	 */
	if (of_device_is_compatible(node, "arm,versatile-sic"))
		writel(0xffd00000, base + PIC_ENABLES);

	return 0;
}