/*!
* pixApplyHorizontalDisparity()
*
* Input: pixs (1, 8 or 32 bpp)
* fpix (horizontal disparity array)
* extraw (extra width added to pixd)
* Return: pixd (modified by fpix), or null on error
*
* Notes:
* (1) This applies the horizontal disparity array to the specified
* image.
*/
PIX *
pixApplyHorizontalDisparity(PIX *pixs,
FPIX *fpix,
l_int32 extraw)
{
l_int32 i, j, w, h, d, wd, fw, fh, wpls, wpld, wplf, jsrc, val8;
l_uint32 *datas, *lines, *datad, *lined;
l_float32 *dataf, *linef;
PIX *pixd;
PROCNAME("pixApplyHorizontalDisparity");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (!fpix)
return (PIX *)ERROR_PTR("fpix not defined", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 1 && d != 8 && d != 32)
return (PIX *)ERROR_PTR("pix not 1, 8 or 32 bpp", procName, NULL);
fpixGetDimensions(fpix, &fw, &fh);
if (fw < w + extraw || fh < h) {
fprintf(stderr, "fw = %d, w = %d, fh = %d, h = %d\n", fw, w, fh, h);
return (PIX *)ERROR_PTR("invalid fpix size", procName, NULL);
}
wd = w + extraw;
pixd = pixCreate(wd, h, d);
datas = pixGetData(pixs);
datad = pixGetData(pixd);
dataf = fpixGetData(fpix);
wpls = pixGetWpl(pixs);
wpld = pixGetWpl(pixd);
wplf = fpixGetWpl(fpix);
if (d == 1) {
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < wd; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (jsrc < 0) jsrc = 0;
if (jsrc > w - 1) jsrc = w - 1;
if (GET_DATA_BIT(lines, jsrc))
SET_DATA_BIT(lined, j);
}
}
}
else if (d == 8) {
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < wd; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (jsrc < 0) jsrc = 0;
if (jsrc > w - 1) jsrc = w - 1;
val8 = GET_DATA_BYTE(lines, jsrc);
SET_DATA_BYTE(lined, j, val8);
}
}
}
else { /* d == 32 */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < wd; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (jsrc < 0) jsrc = 0;
if (jsrc > w - 1) jsrc = w - 1;
lined[j] = lines[jsrc];
}
}
}
return pixd;
}
/*!
* fpixLinearCombo()
*
* Input: fpixd (<optional>; this can be null, equal to fpixs1, or
* different from fpixs1)
* fpixs1 (can be == to fpixd)
* fpixs2
* Return: pixd always
*
* Notes:
* (1) Computes pixelwise linear combination: a * src1 + b * src2
* (2) Alignment is to UL corner.
* (3) There are 3 cases. The result can go to a new dest,
* in-place to fpixs1, or to an existing input dest:
* * fpixd == null: (src1 + src2) --> new fpixd
* * fpixd == fpixs1: (src1 + src2) --> src1 (in-place)
* * fpixd != fpixs1: (src1 + src2) --> input fpixd
* (4) fpixs2 must be different from both fpixd and fpixs1.
*/
FPIX *
fpixLinearCombination(FPIX *fpixd,
FPIX *fpixs1,
FPIX *fpixs2,
l_float32 a,
l_float32 b)
{
l_int32 i, j, ws, hs, w, h, wpls, wpld;
l_float32 val;
l_float32 *datas, *datad, *lines, *lined;
PROCNAME("fpixLinearCombination");
if (!fpixs1)
return (FPIX *)ERROR_PTR("fpixs1 not defined", procName, fpixd);
if (!fpixs2)
return (FPIX *)ERROR_PTR("fpixs2 not defined", procName, fpixd);
if (fpixs1 == fpixs2)
return (FPIX *)ERROR_PTR("fpixs1 == fpixs2", procName, fpixd);
if (fpixs2 == fpixd)
return (FPIX *)ERROR_PTR("fpixs2 == fpixd", procName, fpixd);
if (fpixs1 != fpixd)
fpixd = fpixCopy(fpixd, fpixs1);
datas = fpixGetData(fpixs2);
datad = fpixGetData(fpixd);
wpls = fpixGetWpl(fpixs2);
wpld = fpixGetWpl(fpixd);
fpixGetDimensions(fpixs2, &ws, &hs);
fpixGetDimensions(fpixd, &w, &h);
w = L_MIN(ws, w);
h = L_MIN(hs, h);
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
if (a == 1.0 && b == 1.0) { /* sum */
for (j = 0; j < w; j++)
*(lined + j) += *(lines + j);
}
else if (a == 1.0 && b == -1.0) { /* diff */
for (j = 0; j < w; j++)
*(lined + j) -= *(lines + j);
}
else if (a == -1.0 && b == 1.0) { /* diff */
for (j = 0; j < w; j++) {
val = *(lined + j);
*(lined + j) = -val + *(lines + j);
}
}
else if (a == -1.0 && b == -1.0) {
for (j = 0; j < w; j++) {
val = *(lined + j);
*(lined + j) = -val - *(lines + j);
}
}
else {
for (j = 0; j < w; j++)
*(lined + j) = a * lined[j] + b * lines[j];
}
}
return fpixd;
}
/*!
* pixApplyVerticalDisparity()
*
* Input: pixs (1, 8 or 32 bpp)
* fpix (vertical disparity array)
* Return: pixd (modified by fpix), or null on error
*
* Notes:
* (1) This applies the vertical disparity array to the specified
* image. For src pixels above the image, we use the pixels
* in the first raster line.
*/
PIX *
pixApplyVerticalDisparity(PIX *pixs,
FPIX *fpix)
{
l_int32 i, j, w, h, d, fw, fh, wpld, wplf, isrc, val8;
l_uint32 *datad, *lined;
l_float32 *dataf, *linef;
void **lineptrs;
PIX *pixd;
PROCNAME("pixApplyVerticalDisparity");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (!fpix)
return (PIX *)ERROR_PTR("fpix not defined", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 1 && d != 8 && d != 32)
return (PIX *)ERROR_PTR("pix not 1, 8 or 32 bpp", procName, NULL);
fpixGetDimensions(fpix, &fw, &fh);
if (fw < w || fh < h) {
fprintf(stderr, "fw = %d, w = %d, fh = %d, h = %d\n", fw, w, fh, h);
return (PIX *)ERROR_PTR("invalid fpix size", procName, NULL);
}
pixd = pixCreateTemplate(pixs);
datad = pixGetData(pixd);
dataf = fpixGetData(fpix);
wpld = pixGetWpl(pixd);
wplf = fpixGetWpl(fpix);
if (d == 1) {
lineptrs = pixGetLinePtrs(pixs, NULL);
for (i = 0; i < h; i++) {
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
isrc = (l_int32)(i - linef[j] + 0.5);
if (isrc < 0) isrc = 0;
if (isrc > h - 1) isrc = h - 1;
if (GET_DATA_BIT(lineptrs[isrc], j))
SET_DATA_BIT(lined, j);
}
}
}
else if (d == 8) {
lineptrs = pixGetLinePtrs(pixs, NULL);
for (i = 0; i < h; i++) {
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
isrc = (l_int32)(i - linef[j] + 0.5);
if (isrc < 0) isrc = 0;
if (isrc > h - 1) isrc = h - 1;
val8 = GET_DATA_BYTE(lineptrs[isrc], j);
SET_DATA_BYTE(lined, j, val8);
}
}
}
else { /* d == 32 */
lineptrs = pixGetLinePtrs(pixs, NULL);
for (i = 0; i < h; i++) {
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
isrc = (l_int32)(i - linef[j] + 0.5);
if (isrc < 0) isrc = 0;
if (isrc > h - 1) isrc = h - 1;
lined[j] = GET_DATA_FOUR_BYTES(lineptrs[isrc], j);
}
}
}
FREE(lineptrs);
return pixd;
}
/*!
* fpixRasterop()
*
* Input: fpixd (dest fpix)
* dx (x val of UL corner of dest rectangle)
* dy (y val of UL corner of dest rectangle)
* dw (width of dest rectangle)
* dh (height of dest rectangle)
* fpixs (src fpix)
* sx (x val of UL corner of src rectangle)
* sy (y val of UL corner of src rectangle)
* Return: 0 if OK; 1 on error.
*
* Notes:
* (1) This is similiar in structure to pixRasterop(), except
* it only allows copying from the source into the destination.
* For that reason, no op code is necessary. Additionally,
* all pixels are 32 bit words (float values), which makes
* the copy very simple.
* (2) Clipping of both src and dest fpix are done automatically.
* (3) This allows in-place copying, without checking to see if
* the result is valid: use for in-place with caution!
*/
l_int32
fpixRasterop(FPIX *fpixd,
l_int32 dx,
l_int32 dy,
l_int32 dw,
l_int32 dh,
FPIX *fpixs,
l_int32 sx,
l_int32 sy)
{
l_int32 fsw, fsh, fdw, fdh, dhangw, shangw, dhangh, shangh;
l_int32 i, j, wpls, wpld;
l_float32 *datas, *datad, *lines, *lined;
PROCNAME("fpixRasterop");
if (!fpixs)
return ERROR_INT("fpixs not defined", procName, 1);
if (!fpixd)
return ERROR_INT("fpixd not defined", procName, 1);
/* -------------------------------------------------------- *
* Clip to maximum rectangle with both src and dest *
* -------------------------------------------------------- */
fpixGetDimensions(fpixs, &fsw, &fsh);
fpixGetDimensions(fpixd, &fdw, &fdh);
/* First clip horizontally (sx, dx, dw) */
if (dx < 0) {
sx -= dx; /* increase sx */
dw += dx; /* reduce dw */
dx = 0;
}
if (sx < 0) {
dx -= sx; /* increase dx */
dw += sx; /* reduce dw */
sx = 0;
}
dhangw = dx + dw - fdw; /* rect overhang of dest to right */
if (dhangw > 0)
dw -= dhangw; /* reduce dw */
shangw = sx + dw - fsw; /* rect overhang of src to right */
if (shangw > 0)
dw -= shangw; /* reduce dw */
/* Then clip vertically (sy, dy, dh) */
if (dy < 0) {
sy -= dy; /* increase sy */
dh += dy; /* reduce dh */
dy = 0;
}
if (sy < 0) {
dy -= sy; /* increase dy */
dh += sy; /* reduce dh */
sy = 0;
}
dhangh = dy + dh - fdh; /* rect overhang of dest below */
if (dhangh > 0)
dh -= dhangh; /* reduce dh */
shangh = sy + dh - fsh; /* rect overhang of src below */
if (shangh > 0)
dh -= shangh; /* reduce dh */
/* if clipped entirely, quit */
if ((dw <= 0) || (dh <= 0))
return 0;
/* -------------------------------------------------------- *
* Copy block of data *
* -------------------------------------------------------- */
datas = fpixGetData(fpixs);
datad = fpixGetData(fpixd);
wpls = fpixGetWpl(fpixs);
wpld = fpixGetWpl(fpixd);
datas += sy * wpls + sx; /* at UL corner of block */
datad += dy * wpld + dx; /* at UL corner of block */
for (i = 0; i < dh; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
for (j = 0; j < dw; j++) {
*lined = *lines;
lines++;
lined++;
}
}
return 0;
}
/*!
* fpixConvertToPix()
*
* Input: fpixs
* outdepth (0, 8, 16 or 32 bpp)
* negvals (L_CLIP_TO_ZERO, L_TAKE_ABSVAL)
* errorflag (1 to output error stats; 0 otherwise)
* Return: pixd, or null on error
*
* Notes:
* (1) Use @outdepth = 0 to programmatically determine the
* output depth. If no values are greater than 255,
* it will set outdepth = 8; otherwise to 16 or 32.
* (2) Because we are converting a float to an unsigned int
* with a specified dynamic range (8, 16 or 32 bits), errors
* can occur. If errorflag == TRUE, output the number
* of values out of range, both negative and positive.
* (3) If a pixel value is positive and out of range, clip to
* the maximum value represented at the outdepth of 8, 16
* or 32 bits.
*/
PIX *
fpixConvertToPix(FPIX *fpixs,
l_int32 outdepth,
l_int32 negvals,
l_int32 errorflag)
{
l_int32 w, h, i, j, wpls, wpld, maxval;
l_uint32 vald;
l_float32 val;
l_float32 *datas, *lines;
l_uint32 *datad, *lined;
PIX *pixd;
PROCNAME("fpixConvertToPix");
if (!fpixs)
return (PIX *)ERROR_PTR("fpixs not defined", procName, NULL);
if (negvals != L_CLIP_TO_ZERO && negvals != L_TAKE_ABSVAL)
return (PIX *)ERROR_PTR("invalid negvals", procName, NULL);
if (outdepth != 0 && outdepth != 8 && outdepth != 16 && outdepth != 32)
return (PIX *)ERROR_PTR("outdepth not in {0,8,16,32}", procName, NULL);
fpixGetDimensions(fpixs, &w, &h);
datas = fpixGetData(fpixs);
wpls = fpixGetWpl(fpixs);
/* Adaptive determination of output depth */
if (outdepth == 0) {
outdepth = 8;
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
for (j = 0; j < w; j++) {
if (lines[j] > 65535.5) {
outdepth = 32;
break;
}
if (lines[j] > 255.5)
outdepth = 16;
}
if (outdepth == 32) break;
}
}
maxval = (1 << outdepth) - 1;
/* Gather statistics if @errorflag = TRUE */
if (errorflag) {
l_int32 negs = 0;
l_int32 overvals = 0;
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
for (j = 0; j < w; j++) {
val = lines[j];
if (val < 0.0)
negs++;
else if (val > maxval)
overvals++;
}
}
if (negs > 0)
L_ERROR_INT("Number of negative values: %d", procName, negs);
if (overvals > 0)
L_ERROR_INT("Number of too-large values: %d", procName, overvals);
}
/* Make the pix and convert the data */
if ((pixd = pixCreate(w, h, outdepth)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
datad = pixGetData(pixd);
wpld = pixGetWpl(pixd);
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
for (j = 0; j < w; j++) {
val = lines[j];
if (val >= 0.0)
vald = (l_uint32)(val + 0.5);
else { /* val < 0.0 */
if (negvals == L_CLIP_TO_ZERO)
vald = 0;
else
vald = (l_uint32)(-val + 0.5);
}
if (vald > maxval)
vald = maxval;
if (outdepth == 8)
SET_DATA_BYTE(lined, j, vald);
else if (outdepth == 16)
SET_DATA_TWO_BYTES(lined, j, vald);
else /* outdepth == 32 */
SET_DATA_FOUR_BYTES(lined, j, vald);
}
}
return pixd;
}
/*!
* dewarpPopulateFullRes()
*
* Input: dew
* pix (<optional>, to give size of actual image)
* x, y (origin for generation of disparity arrays)
* Return: 0 if OK, 1 on error
*
* Notes:
* (1) If the full resolution vertical and horizontal disparity
* arrays do not exist, they are built from the subsampled ones.
* (2) If pixs is not given, the size of the arrays is determined
* by the original image from which the sampled version was
* generated. Any values of (x,y) are ignored.
* (3) If pixs is given, the full resolution disparity arrays must
* be large enough to accommodate it.
* (a) If the arrays do not exist, the value of (x,y) determines
* the origin of the full resolution arrays without extension,
* relative to pixs. Thus, (x,y) gives the amount of
* slope extension in (left, top). The (right, bottom)
* extension is then determined by the size of pixs and
* (x,y); the values should never be < 0.
* (b) If the arrays exist and pixs is too large, the existing
* full res arrays are destroyed and new ones are made,
* again using (x,y) to determine the extension in the
* four directions.
*/
l_int32
dewarpPopulateFullRes(L_DEWARP *dew,
PIX *pix,
l_int32 x,
l_int32 y)
{
l_int32 width, height, fw, fh, deltaw, deltah, redfactor;
FPIX *fpixt1, *fpixt2;
PROCNAME("dewarpPopulateFullRes");
if (!dew)
return ERROR_INT("dew not defined", procName, 1);
if (!dew->sampvdispar)
return ERROR_INT("no sampled vert disparity", procName, 1);
if (x < 0) x = 0;
if (y < 0) y = 0;
/* Establish the target size for the full res arrays */
if (pix)
pixGetDimensions(pix, &width, &height, NULL);
else {
width = dew->w;
height = dew->h;
}
/* Destroy the existing arrays if they are too small */
if (dew->fullvdispar) {
fpixGetDimensions(dew->fullvdispar, &fw, &fh);
if (width > fw || height > fw)
fpixDestroy(&dew->fullvdispar);
}
if (dew->fullhdispar) {
fpixGetDimensions(dew->fullhdispar, &fw, &fh);
if (width > fw || height > fw)
fpixDestroy(&dew->fullhdispar);
}
/* Find the required width and height expansion deltas */
deltaw = width - dew->sampling * (dew->nx - 1) + 2;
deltah = height - dew->sampling * (dew->ny - 1) + 2;
redfactor = dew->redfactor;
deltaw = redfactor * L_MAX(0, deltaw);
deltah = redfactor * L_MAX(0, deltah);
/* Generate the full res vertical array if it doesn't exist,
* extending it as required to make it big enough. Use x,y
* to determine the amounts on each side. */
if (!dew->fullvdispar) {
fpixt1 = fpixCopy(NULL, dew->sampvdispar);
if (redfactor == 2)
fpixAddMultConstant(fpixt1, 0.0, (l_float32)redfactor);
fpixt2 = fpixScaleByInteger(fpixt1, dew->sampling * redfactor);
fpixDestroy(&fpixt1);
if (deltah == 0 && deltaw == 0) {
dew->fullvdispar = fpixt2;
}
else {
dew->fullvdispar = fpixAddSlopeBorder(fpixt2, x, deltaw - x,
y, deltah - y);
fpixDestroy(&fpixt2);
}
}
/* Similarly, generate the full res horizontal array if it
* doesn't exist. Do this even if useboth == 0. */
if (!dew->fullhdispar && dew->samphdispar) {
fpixt1 = fpixCopy(NULL, dew->samphdispar);
if (redfactor == 2)
fpixAddMultConstant(fpixt1, 0.0, (l_float32)redfactor);
fpixt2 = fpixScaleByInteger(fpixt1, dew->sampling * redfactor);
fpixDestroy(&fpixt1);
if (deltah == 0 && deltaw == 0) {
dew->fullhdispar = fpixt2;
}
else {
dew->fullhdispar = fpixAddSlopeBorder(fpixt2, x, deltaw - x,
y, deltah - y);
fpixDestroy(&fpixt2);
}
}
return 0;
}
/*!
* boxaApplyDisparity()
*
* Input: dew
* boxa
* direction (L_HORIZ or L_VERT)
* mapdir (1 if mapping forward from original to dewarped;
* 0 if backward)
* Return: boxad (modified by the disparity), or null on error
*/
static BOXA *
boxaApplyDisparity(L_DEWARP *dew,
BOXA *boxa,
l_int32 direction,
l_int32 mapdir)
{
l_int32 x, y, w, h, ib, ip, nbox, wpl;
l_float32 xn, yn;
l_float32 *data, *line;
BOX *boxs, *boxd;
BOXA *boxad;
FPIX *fpix;
PTA *ptas, *ptad;
PROCNAME("boxaApplyDisparity");
if (!dew)
return (BOXA *)ERROR_PTR("dew not defined", procName, NULL);
if (!boxa)
return (BOXA *)ERROR_PTR("boxa not defined", procName, NULL);
if (direction == L_VERT)
fpix = dew->fullvdispar;
else if (direction == L_HORIZ)
fpix = dew->fullhdispar;
else
return (BOXA *)ERROR_PTR("invalid direction", procName, NULL);
if (!fpix)
return (BOXA *)ERROR_PTR("full disparity not defined", procName, NULL);
fpixGetDimensions(fpix, &w, &h);
/* Clip the output to the positive quadrant because all box
* coordinates must be non-negative. */
data = fpixGetData(fpix);
wpl = fpixGetWpl(fpix);
nbox = boxaGetCount(boxa);
boxad = boxaCreate(nbox);
for (ib = 0; ib < nbox; ib++) {
boxs = boxaGetBox(boxa, ib, L_COPY);
ptas = boxConvertToPta(boxs, 4);
ptad = ptaCreate(4);
for (ip = 0; ip < 4; ip++) {
ptaGetIPt(ptas, ip, &x, &y);
line = data + y * wpl;
if (direction == L_VERT) {
if (mapdir == 0)
yn = y - line[x];
else
yn = y + line[x];
yn = L_MAX(0, yn);
ptaAddPt(ptad, x, yn);
} else { /* direction == L_HORIZ */
if (mapdir == 0)
xn = x - line[x];
else
xn = x + line[x];
xn = L_MAX(0, xn);
ptaAddPt(ptad, xn, y);
}
}
boxd = ptaConvertToBox(ptad);
boxaAddBox(boxad, boxd, L_INSERT);
boxDestroy(&boxs);
ptaDestroy(&ptas);
ptaDestroy(&ptad);
}
return boxad;
}
/*!
* pixApplyHorizDisparity()
*
* Input: dew
* pixs (1, 8 or 32 bpp)
* grayin (gray value, from 0 to 255, for pixels brought in;
* use -1 to use pixels on the boundary of pixs)
* Return: pixd (modified to remove horizontal disparity if possible),
* or null on error.
*
* Notes:
* (1) This applies the horizontal disparity array to the specified
* image.
* (2) Specify gray color for pixels brought in from the outside:
* 0 is black, 255 is white. Use -1 to select pixels from the
* boundary of the source image.
* (3) The input pixs has already been corrected for vertical disparity.
* If the horizontal disparity array doesn't exist, this returns
* a clone of @pixs.
*/
static PIX *
pixApplyHorizDisparity(L_DEWARP *dew,
PIX *pixs,
l_int32 grayin)
{
l_int32 i, j, w, h, d, fw, fh, wpls, wpld, wplf, jsrc, val8;
l_uint32 *datas, *lines, *datad, *lined;
l_float32 *dataf, *linef;
FPIX *fpix;
PIX *pixd;
PROCNAME("pixApplyHorizDisparity");
if (!dew)
return (PIX *)ERROR_PTR("dew not defined", procName, pixs);
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 1 && d != 8 && d != 32)
return (PIX *)ERROR_PTR("pix not 1, 8 or 32 bpp", procName, NULL);
if ((fpix = dew->fullhdispar) == NULL)
return (PIX *)ERROR_PTR("fullhdispar not defined", procName, NULL);
fpixGetDimensions(fpix, &fw, &fh);
if (fw < w || fh < h) {
fprintf(stderr, "fw = %d, w = %d, fh = %d, h = %d\n", fw, w, fh, h);
return (PIX *)ERROR_PTR("invalid fpix size", procName, NULL);
}
/* Two choices for requested pixels outside pixs: (1) use pixels'
* from the boundary of pixs; use white or light gray pixels. */
pixd = pixCreateTemplate(pixs);
if (grayin >= 0)
pixSetAllGray(pixd, grayin);
datas = pixGetData(pixs);
datad = pixGetData(pixd);
dataf = fpixGetData(fpix);
wpls = pixGetWpl(pixs);
wpld = pixGetWpl(pixd);
wplf = fpixGetWpl(fpix);
if (d == 1) {
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (grayin < 0) /* use value at boundary if outside */
jsrc = L_MIN(L_MAX(jsrc, 0), w - 1);
if (jsrc >= 0 && jsrc < w) { /* remains gray if outside */
if (GET_DATA_BIT(lines, jsrc))
SET_DATA_BIT(lined, j);
}
}
}
} else if (d == 8) {
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (grayin < 0)
jsrc = L_MIN(L_MAX(jsrc, 0), w - 1);
if (jsrc >= 0 && jsrc < w) {
val8 = GET_DATA_BYTE(lines, jsrc);
SET_DATA_BYTE(lined, j, val8);
}
}
}
} else { /* d == 32 */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
linef = dataf + i * wplf;
for (j = 0; j < w; j++) {
jsrc = (l_int32)(j - linef[j] + 0.5);
if (grayin < 0)
jsrc = L_MIN(L_MAX(jsrc, 0), w - 1);
if (jsrc >= 0 && jsrc < w)
lined[j] = lines[jsrc];
}
}
}
return pixd;
}
