int64_t ibm_fsp_cec_power_down(uint64_t request)
{
/* Request is:
*
* 0 = normal
* 1 = immediate
* (we do not allow 2 for "pci cfg reset" just yet)
*/
if (request !=0 && request != 1)
return OPAL_PARAMETER;
if (!fsp_present())
return OPAL_UNSUPPORTED;
/* Flash new firmware */
if (fsp_flash_term_hook)
fsp_flash_term_hook();
printf("FSP: Sending shutdown command to FSP...\n");
if (fsp_sync_msg(fsp_mkmsg(FSP_CMD_POWERDOWN_NORM, 1, request), true))
return OPAL_BUSY_EVENT;
fsp_reset_links();
return OPAL_SUCCESS;
}
static bool send_response_to_fsp(u32 cmd_sub_mod)
{
struct fsp_msg *rsp;
int rc = -ENOMEM;
rsp = fsp_mkmsg(cmd_sub_mod, 0);
if (rsp)
rc = fsp_queue_msg(rsp, fsp_freemsg);
if (rc) {
fsp_freemsg(rsp);
/* XXX Generate error logs */
prerror("Error %d queueing FSP memory error reply\n", rc);
return false;
}
return true;
}
static bool fsp_chiptod_update_topology(uint32_t cmd_sub_mod,
struct fsp_msg *msg)
{
struct fsp_msg *resp;
enum chiptod_topology topo;
bool action;
uint8_t status = 0;
switch (cmd_sub_mod) {
case FSP_CMD_TOPO_ENABLE_DISABLE:
/*
* Action Values: 0x00 = Disable, 0x01 = Enable
* Topology Values: 0x00 = Primary, 0x01 = Secondary
*/
action = !!msg->data.bytes[2];
topo = msg->data.bytes[3];
prlog(PR_DEBUG, "Topology update event:\n");
prlog(PR_DEBUG, " Action = %s, Topology = %s\n",
action ? "Enable" : "Disable",
topo ? "Secondary" : "Primary");
if (!chiptod_adjust_topology(topo, action))
status = FSP_STATUS_TOPO_IN_USE;
else
status = 0x00;
resp = fsp_mkmsg(FSP_RSP_TOPO_ENABLE_DISABLE | status, 0);
if (!resp) {
prerror("Response allocation failed\n");
return false;
}
if (fsp_queue_msg(resp, fsp_freemsg)) {
fsp_freemsg(resp);
prerror("Failed to queue response msg\n");
return false;
}
return true;
default:
prlog(PR_DEBUG, "Unhandled sub cmd: %06x\n", cmd_sub_mod);
break;
}
return false;
}
int64_t ibm_fsp_cec_reboot(void)
{
uint32_t cmd = FSP_CMD_REBOOT;
if (!fsp_present())
return OPAL_UNSUPPORTED;
/* Flash new firmware */
if (fsp_flash_term_hook &&
fsp_flash_term_hook() == OPAL_SUCCESS)
cmd = FSP_CMD_DEEP_REBOOT;
printf("FSP: Sending 0x%02x reboot command to FSP...\n", cmd);
/* If that failed, talk to the FSP */
if (fsp_sync_msg(fsp_mkmsg(cmd, 0), true))
return OPAL_BUSY_EVENT;
return OPAL_SUCCESS;
}
/* Process captured EPOW event notification */
static void fsp_process_epow(struct fsp_msg *msg, int epow_type)
{
struct fsp_msg *resp;
u8 epow[8];
/* Basic EPOW signature */
if (msg->data.bytes[0] != 0xF2) {
prlog(PR_ERR, "Signature mismatch\n");
return;
}
/* Common to all EPOW event types */
epow[0] = msg->data.bytes[0];
epow[1] = msg->data.bytes[1];
epow[2] = msg->data.bytes[2];
epow[3] = msg->data.bytes[3];
/*
* After receiving the FSP async message, HV needs to
* ask for the detailed panel status through corresponding
* mbox command. HV need not use the received details status
* as it does not have any thing more or new than what came
* along with the original FSP async message. But requesting
* for the detailed panel status exclussively is necessary as
* it forms a kind of handshaking with the FSP. Without this
* step, FSP wont be sending any new panel status messages.
*/
switch(epow_type) {
case EPOW_NORMAL:
resp = fsp_mkmsg(FSP_CMD_STATUS_REQ, 0);
if (resp == NULL) {
prerror("%s : Message allocation failed\n",
__func__);
break;
}
if (fsp_queue_msg(resp, fsp_freemsg)) {
fsp_freemsg(resp);
prerror("%s : Failed to queue response "
"message\n", __func__);
}
break;
case EPOW_EX1:
/* EPOW_EX1 specific extra event data */
epow[4] = msg->data.bytes[4];
resp = fsp_mkmsg(FSP_CMD_STATUS_EX1_REQ, 0);
if (resp == NULL) {
prerror("%s : Message allocation failed\n",
__func__);
break;
}
if (fsp_queue_msg(resp, fsp_freemsg)) {
fsp_freemsg(resp);
prerror("%s : Failed to queue response "
"message\n", __func__);
}
break;
case EPOW_EX2:
resp = fsp_mkmsg(FSP_CMD_STATUS_EX2_REQ, 0);
if (resp == NULL) {
prerror("%s : Message allocation failed\n",
__func__);
break;
}
if (fsp_queue_msg(resp, fsp_freemsg)) {
fsp_freemsg(resp);
prerror("%s : Failed to queue response "
"message\n", __func__);
}
break;
default:
prlog(PR_WARNING, "Unknown EPOW event notification\n");
return;
}
fsp_epow_update(epow, epow_type);
}
static void firenze_send_pci_inventory(void)
{
uint64_t base, abase, end, aend, offset;
int64_t rc;
if (!fsp_pcie_inv)
return;
prlog(PR_DEBUG, "PLAT: Sending PCI inventory to FSP, table has"
" %d entries\n",
fsp_pcie_inv->num_entries);
{
unsigned int i;
prlog(PR_DEBUG, "HWP SLT VDID DVID SVID SDID\n");
prlog(PR_DEBUG, "---------------------------\n");
for (i = 0; i < fsp_pcie_inv->num_entries; i++) {
struct fsp_pcie_entry *e = &fsp_pcie_inv->entries[i];
prlog(PR_DEBUG, "%03d %03d %04x %04x %04x %04x\n",
e->hw_proc_id, e->slot_idx,
e->vendor_id, e->device_id,
e->subsys_vendor_id, e->subsys_device_id);
}
}
/*
* Get the location of the table in a form we can send
* to the FSP
*/
base = (uint64_t)fsp_pcie_inv;
end = base + sizeof(struct fsp_pcie_inventory) +
fsp_pcie_inv->num_entries * fsp_pcie_inv->entry_size;
abase = base & ~0xffful;
aend = (end + 0xffful) & ~0xffful;
offset = PSI_DMA_PCIE_INVENTORY + (base & 0xfff);
/* We can only accomodate so many entries in the PSI map */
if ((aend - abase) > PSI_DMA_PCIE_INVENTORY_SIZE) {
prerror("PLAT: PCIe inventory too large (%lld bytes)\n",
aend - abase);
goto bail;
}
/* Map this in the TCEs */
fsp_tce_map(PSI_DMA_PCIE_INVENTORY, (void *)abase, aend - abase);
/* Send FSP message */
rc = fsp_sync_msg(fsp_mkmsg(FSP_CMD_PCI_POWER_CONF, 3,
hi32(offset), lo32(offset),
end - base), true);
if (rc)
prerror("PLAT: FSP error %lld sending inventory\n", rc);
/* Unmap */
fsp_tce_unmap(PSI_DMA_PCIE_INVENTORY, aend - abase);
bail:
/*
* We free the inventory. We'll have to redo that on hotplug
* when we support it but that isn't the case yet
*/
free(fsp_pcie_inv);
fsp_pcie_inv = NULL;
}
