int main(int argc, char *argv[]) {
int port;
char *name = NULL;
/* verify that all datatypes have the expected syze in bytes */
check_datatypes();
if (argc>1) {
port = atoi(argv[1]);
if (port == 0) {
name = argv[1];
}
} else {
port = 1972;
}
/* with enabled debug output */
S = ft_start_buffer_server(port, name, my_request_handler, NULL);
/* plain server without extra output */
/*
S = ft_start_buffer_server(port, name, NULL, NULL);
*/
if (S==NULL) return 1;
signal(SIGINT, abortHandler);
while (keepRunning) {
usleep(1000000);
}
printf("Ctrl-C pressed -- stopping buffer server...\n");
ft_stop_buffer_server(S);
printf("Done.\n");
return 0;
}
int main(int argc, char *argv[]) {
int n, i, c, count = 0, sample = 0, chan = 0, status = 0, verbose = 0, labelSize;
unsigned char buf[OPENBCI_BUFLEN], byte;
char *labelString;
SerialPort SP;
host_t host;
struct timespec tic, toc;
/* these represent the general acquisition system properties */
int nchans = OPENBCI_NCHANS;
float fsample = OPENBCI_FSAMPLE;
/* these are used in the communication with the FT buffer and represent statefull information */
int ftSocket = -1;
ft_buffer_server_t *ftServer;
message_t *request = NULL;
message_t *response = NULL;
header_t *header = NULL;
data_t *data = NULL;
ft_chunkdef_t *label = NULL;
/* this contains the configuration details */
configuration config;
/* configure the default settings */
config.blocksize = 10;
config.port = 1972;
config.hostname = strdup("-");
config.serial = strdup("/dev/tty.usbserial-DN0094FY");
config.reset = strdup("on");
config.datalog = strdup("off");
config.testsignal = strdup("off");
config.timestamp = strdup("on");
config.timeref = strdup("start");
config.enable_chan1 = strdup("on");
config.enable_chan2 = strdup("on");
config.enable_chan3 = strdup("on");
config.enable_chan4 = strdup("on");
config.enable_chan5 = strdup("on");
config.enable_chan6 = strdup("on");
config.enable_chan7 = strdup("on");
config.enable_chan8 = strdup("on");
config.enable_chan9 = strdup("on");
config.enable_chan10 = strdup("on");
config.enable_chan11 = strdup("on");
config.label_chan1 = strdup("ADC1");
config.label_chan2 = strdup("ADC2");
config.label_chan3 = strdup("ADC3");
config.label_chan4 = strdup("ADC4");
config.label_chan5 = strdup("ADC5");
config.label_chan6 = strdup("ADC6");
config.label_chan7 = strdup("ADC7");
config.label_chan8 = strdup("ADC8");
config.label_chan9 = strdup("AccelerationX");
config.label_chan10 = strdup("AccelerationY");
config.label_chan11 = strdup("AccelerationZ");
config.label_chan12 = strdup("TimeStamp");
config.setting_chan1 = strdup("x1060110X");
config.setting_chan2 = strdup("x2060110X");
config.setting_chan3 = strdup("x3060110X");
config.setting_chan4 = strdup("x4060110X");
config.setting_chan5 = strdup("x5060110X");
config.setting_chan6 = strdup("x6060110X");
config.setting_chan7 = strdup("x7060110X");
config.setting_chan8 = strdup("x8060110X");
config.impedance_chan1 = strdup("z100Z");
config.impedance_chan2 = strdup("z200Z");
config.impedance_chan3 = strdup("z300Z");
config.impedance_chan4 = strdup("z400Z");
config.impedance_chan5 = strdup("z500Z");
config.impedance_chan6 = strdup("z600Z");
config.impedance_chan7 = strdup("z700Z");
config.impedance_chan8 = strdup("z800Z");
if (argc<2) {
printf(usage);
exit(0);
}
if (argc==2) {
if (strncmp(argv[1], "/dev", 4)==0 || strncasecmp(argv[1], "COM", 3)==0)
/* the second argument is the serial port */
config.serial = strdup(argv[1]);
else {
/* the second argument is the configuration file */
fprintf(stderr, "openbci2ft: loading configuration from '%s'\n", argv[1]);
if (ini_parse(argv[1], iniHandler, &config) < 0) {
fprintf(stderr, "Can't load '%s'\n", argv[1]);
return 1;
}
}
}
if (argc>2)
strcpy(host.name, argv[2]);
else {
strcpy(host.name, config.hostname);
}
if (argc>3)
host.port = atoi(argv[3]);
else {
host.port = config.port;
}
#define ISTRUE(s) strcasecmp(s, "on")==0
nchans = 0;
if (ISTRUE(config.enable_chan1))
nchans++;
if (ISTRUE(config.enable_chan2))
nchans++;
if (ISTRUE(config.enable_chan3))
nchans++;
if (ISTRUE(config.enable_chan4))
nchans++;
if (ISTRUE(config.enable_chan5))
nchans++;
if (ISTRUE(config.enable_chan6))
nchans++;
if (ISTRUE(config.enable_chan7))
nchans++;
if (ISTRUE(config.enable_chan8))
nchans++;
if (ISTRUE(config.enable_chan9))
nchans++;
if (ISTRUE(config.enable_chan10))
nchans++;
if (ISTRUE(config.enable_chan11))
nchans++;
if (ISTRUE(config.timestamp))
nchans++;
fprintf(stderr, "openbci2ft: serial = %s\n", config.serial);
fprintf(stderr, "openbci2ft: hostname = %s\n", host.name);
fprintf(stderr, "openbci2ft: port = %d\n", host.port);
fprintf(stderr, "openbci2ft: blocksize = %d\n", config.blocksize);
fprintf(stderr, "openbci2ft: reset = %s\n", config.reset);
fprintf(stderr, "openbci2ft: datalog = %s\n", config.datalog);
fprintf(stderr, "openbci2ft: timestamp = %s\n", config.timestamp);
fprintf(stderr, "openbci2ft: testsignal = %s\n", config.testsignal);
/* Spawn tcpserver or connect to remote buffer */
if (strcmp(host.name, "-") == 0) {
ftServer = ft_start_buffer_server(host.port, NULL, NULL, NULL);
if (ftServer==NULL) {
fprintf(stderr, "openbci2ft: could not start up a local buffer serving at port %i\n", host.port);
return 1;
}
ftSocket = 0;
printf("openbci2ft: streaming to local buffer on port %i\n", host.port);
}
else {
ftSocket = open_connection(host.name, host.port);
if (ftSocket < 0) {
fprintf(stderr, "openbci2ft: could not connect to remote buffer at %s:%i\n", host.name, host.port);
return 1;
}
printf("openbci2ft: streaming to remote buffer at %s:%i\n", host.name, host.port);
}
/* allocate the elements that will be used in the communication to the FT buffer */
request = malloc(sizeof(message_t));
request->def = malloc(sizeof(messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
header = malloc(sizeof(header_t));
header->def = malloc(sizeof(headerdef_t));
header->buf = NULL;
data = malloc(sizeof(data_t));
data->def = malloc(sizeof(datadef_t));
data->buf = NULL;
/* define the header */
header->def->nchans = nchans;
header->def->fsample = fsample;
header->def->nsamples = 0;
header->def->nevents = 0;
header->def->data_type = DATATYPE_FLOAT32;
header->def->bufsize = 0;
/* FIXME add the channel names */
labelSize = 0; /* count the number of bytes required */
if (ISTRUE (config.enable_chan1))
labelSize += strlen (config.label_chan1) + 1;
if (ISTRUE (config.enable_chan2))
labelSize += strlen (config.label_chan2) + 1;
if (ISTRUE (config.enable_chan3))
labelSize += strlen (config.label_chan3) + 1;
if (ISTRUE (config.enable_chan4))
labelSize += strlen (config.label_chan4) + 1;
if (ISTRUE (config.enable_chan5))
labelSize += strlen (config.label_chan5) + 1;
if (ISTRUE (config.enable_chan6))
labelSize += strlen (config.label_chan6) + 1;
if (ISTRUE (config.enable_chan7))
labelSize += strlen (config.label_chan7) + 1;
if (ISTRUE (config.enable_chan8))
labelSize += strlen (config.label_chan8) + 1;
if (ISTRUE (config.enable_chan9))
labelSize += strlen (config.label_chan9) + 1;
if (ISTRUE (config.enable_chan10))
labelSize += strlen (config.label_chan10) + 1;
if (ISTRUE (config.enable_chan11))
labelSize += strlen (config.label_chan11) + 1;
if (ISTRUE (config.timestamp))
labelSize += strlen (config.label_chan12) + 1;
if (verbose > 0)
fprintf (stderr, "openbci2ft: labelSize = %d\n", labelSize);
/* go over all channels for a 2nd time, now copying the strings to the destination */
labelString = (char *) malloc (labelSize * sizeof(char));
labelSize = 0;
if (ISTRUE (config.enable_chan1)) {
strcpy (labelString+labelSize, config.label_chan1);
labelSize += strlen (config.label_chan1) + 1;
}
if (ISTRUE (config.enable_chan2)) {
strcpy (labelString+labelSize, config.label_chan2);
labelSize += strlen (config.label_chan2) + 1;
}
if (ISTRUE (config.enable_chan3)) {
strcpy (labelString+labelSize, config.label_chan3);
labelSize += strlen (config.label_chan3) + 1;
}
if (ISTRUE (config.enable_chan4)) {
strcpy (labelString+labelSize, config.label_chan4);
labelSize += strlen (config.label_chan4) + 1;
}
if (ISTRUE (config.enable_chan5)) {
strcpy (labelString+labelSize, config.label_chan5);
labelSize += strlen (config.label_chan5) + 1;
}
if (ISTRUE (config.enable_chan6)) {
strcpy (labelString+labelSize, config.label_chan6);
labelSize += strlen (config.label_chan6) + 1;
}
if (ISTRUE (config.enable_chan7)) {
strcpy (labelString+labelSize, config.label_chan7);
labelSize += strlen (config.label_chan7) + 1;
}
if (ISTRUE (config.enable_chan8)) {
strcpy (labelString+labelSize, config.label_chan8);
labelSize += strlen (config.label_chan8) + 1;
}
if (ISTRUE (config.enable_chan9)) {
strcpy (labelString+labelSize, config.label_chan9);
labelSize += strlen (config.label_chan9) + 1;
}
if (ISTRUE (config.enable_chan10)) {
strcpy (labelString+labelSize, config.label_chan10);
labelSize += strlen (config.label_chan10) + 1;
}
if (ISTRUE (config.enable_chan11)) {
strcpy (labelString+labelSize, config.label_chan11);
labelSize += strlen (config.label_chan11) + 1;
}
if (ISTRUE (config.timestamp)) {
strcpy (labelString+labelSize, config.label_chan12);
labelSize += strlen (config.label_chan12) + 1;
}
/* add the channel label chunk to the header */
label = (ft_chunkdef_t *) malloc (sizeof (ft_chunkdef_t));
label->type = FT_CHUNK_CHANNEL_NAMES;
label->size = labelSize;
header->def->bufsize = append (&header->buf, header->def->bufsize, label, sizeof (ft_chunkdef_t));
header->def->bufsize = append (&header->buf, header->def->bufsize, labelString, labelSize);
FREE (label);
FREE (labelString);
/* define the constant part of the data and allocate space for the variable part */
data->def->nchans = nchans;
data->def->nsamples = config.blocksize;
data->def->data_type = DATATYPE_FLOAT32;
data->def->bufsize = WORDSIZE_FLOAT32 * nchans * config.blocksize;
data->buf = malloc (data->def->bufsize);
/* initialization phase, send the header */
request->def->command = PUT_HDR;
request->def->bufsize = append (&request->buf, request->def->bufsize, header->def, sizeof (headerdef_t));
request->def->bufsize = append (&request->buf, request->def->bufsize, header->buf, header->def->bufsize);
/* this is not needed any more */
cleanup_header (&header);
status = clientrequest (ftSocket, request, &response);
if (verbose > 0)
fprintf (stderr, "openbci2ft: clientrequest returned %d\n", status);
if (status)
{
fprintf (stderr, "openbci2ft: could not send request to buffer\n");
exit (1);
}
if (status || response == NULL || response->def == NULL)
{
fprintf (stderr, "openbci2ft: error in %s on line %d\n", __FILE__,
__LINE__);
exit (1);
}
cleanup_message (&request);
if (response->def->command != PUT_OK)
{
fprintf (stderr, "openbci2ft: error in 'put header' request.\n");
exit (1);
}
cleanup_message (&response);
/* open the serial port */
fprintf (stderr, "openbci2ft: opening serial port ...\n");
if (!serialOpenByName (&SP, config.serial))
{
fprintf (stderr, "Could not open serial port %s\n", config.serial);
return 1;
}
if (!serialSetParameters (&SP, 115200, 8, 0, 0, 0))
{
fprintf (stderr, "Could not modify serial port parameters\n");
return 1;
}
fprintf (stderr, "openbci2ft: opening serial port ... ok\n");
/* 8-bit board will always be initialized upon opening serial port, 32-bit board needs explicit initialization */
fprintf (stderr, "openbci2ft: initializing ...\n");
fprintf (stderr,
"openbci2ft: press reset on the OpenBCI board if this takes too long\n");
if (ISTRUE (config.reset))
serialWrite (&SP, 1, "v"); /* soft reset, this will return $$$ */
else
serialWrite (&SP, 1, "D"); /* query default channel settings, this will also return $$$ */
/* wait for '$$$' which indicates that the OpenBCI has been initialized */
c = 0;
while (c != 3)
{
usleep (1000);
n = serialRead (&SP, 1, &byte);
if (n == 1)
{
if (byte == '$')
c++;
else
c = 0;
}
} /* while waiting for '$$$' */
if (strcasecmp (config.datalog, "14s") == 0)
serialWrite (&SP, 1, "a");
else if (strcasecmp (config.datalog, "5min") == 0)
serialWrite (&SP, 1, "A");
else if (strcasecmp (config.datalog, "15min") == 0)
serialWrite (&SP, 1, "S");
else if (strcasecmp (config.datalog, "30min") == 0)
serialWrite (&SP, 1, "F");
else if (strcasecmp (config.datalog, "1hr") == 0)
serialWrite (&SP, 1, "G");
else if (strcasecmp (config.datalog, "2hr") == 0)
serialWrite (&SP, 1, "H");
else if (strcasecmp (config.datalog, "4hr") == 0)
serialWrite (&SP, 1, "J");
else if (strcasecmp (config.datalog, "12hr") == 0)
serialWrite (&SP, 1, "K");
else if (strcasecmp (config.datalog, "24hr") == 0)
serialWrite (&SP, 1, "L");
else if (strcasecmp (config.datalog, "off") != 0)
{
fprintf (stderr, "Incorrect specification of datalog\n");
return 1;
}
serialWriteSlow (&SP, strlen (config.setting_chan1), config.setting_chan1);
serialWriteSlow (&SP, strlen (config.setting_chan2), config.setting_chan2);
serialWriteSlow (&SP, strlen (config.setting_chan3), config.setting_chan3);
serialWriteSlow (&SP, strlen (config.setting_chan4), config.setting_chan4);
serialWriteSlow (&SP, strlen (config.setting_chan5), config.setting_chan5);
serialWriteSlow (&SP, strlen (config.setting_chan6), config.setting_chan6);
serialWriteSlow (&SP, strlen (config.setting_chan7), config.setting_chan7);
serialWriteSlow (&SP, strlen (config.setting_chan8), config.setting_chan8);
if (strcasecmp (config.testsignal, "gnd") == 0)
serialWrite (&SP, 1, "0");
else if (strcasecmp (config.testsignal, "dc") == 0)
serialWrite (&SP, 1, "-");
else if (strcasecmp (config.testsignal, "1xSlow") == 0)
serialWrite (&SP, 1, "=");
else if (strcasecmp (config.testsignal, "1xFast") == 0)
serialWrite (&SP, 1, "p");
else if (strcasecmp (config.testsignal, "2xSlow") == 0)
serialWrite (&SP, 1, "[");
else if (strcasecmp (config.testsignal, "2xFast") == 0)
serialWrite (&SP, 1, "]");
else if (strcasecmp (config.testsignal, "off") != 0)
{
fprintf (stderr, "Incorrect specification of testsignal\n");
return 1;
}
fprintf (stderr, "openbci2ft: initializing ... ok\n");
printf ("Starting to listen - press CTRL-C to quit\n");
/* register CTRL-C handler */
signal (SIGINT, abortHandler);
/* start streaming data */
serialWrite (&SP, 1, "b");
/* determine the reference time for the timestamps */
if (strcasecmp (config.timeref, "start") == 0)
{
/* since the start of the acquisition */
get_monotonic_time (&tic, TIMESTAMP_REF_BOOT);
}
else if (strcasecmp (config.timeref, "boot") == 0)
{
/* since the start of the day */
tic.tv_sec = 0;
tic.tv_nsec = 0;
}
else if (strcasecmp (config.timeref, "epoch") == 0)
{
/* since the start of the epoch, i.e. 1-1-1970 */
tic.tv_sec = 0;
tic.tv_nsec = 0;
}
else
{
fprintf (stderr,
"Incorrect specification of timeref, should be 'start', 'day' or 'epoch'\n");
return 1;
}
while (keepRunning)
{
sample = 0;
while (sample < config.blocksize)
{
/* wait for the first byte of the following packet */
buf[0] = 0;
while (buf[0] != 0xA0)
{
if (serialInputPending (&SP))
n = serialRead (&SP, 1, buf);
else
usleep (1000);
} /* while */
/*
* Header
* Byte 1: 0xA0
* Byte 2: Sample Number
*
* EEG Data
* Note: values are 24-bit signed, MSB first
* Bytes 3-5: Data value for EEG channel 1
* Bytes 6-8: Data value for EEG channel 2
* Bytes 9-11: Data value for EEG channel 3
* Bytes 12-14: Data value for EEG channel 4
* Bytes 15-17: Data value for EEG channel 5
* Bytes 18-20: Data value for EEG channel 6
* Bytes 21-23: Data value for EEG channel 6
* Bytes 24-26: Data value for EEG channel 8
*
* Accelerometer Data
* Note: values are 16-bit signed, MSB first
* Bytes 27-28: Data value for accelerometer channel X
* Bytes 29-30: Data value for accelerometer channel Y
* Bytes 31-32: Data value for accelerometer channel Z
*
* Footer
* Byte 33: 0xC0
*/
/* read the remaining 32 bytes of the packet */
while (n < OPENBCI_BUFLEN)
if (serialInputPending (&SP))
n += serialRead (&SP, (OPENBCI_BUFLEN - n), buf + n);
else
usleep (1000);
if (verbose > 1)
{
for (i = 0; i < OPENBCI_BUFLEN; i++)
printf ("%02x ", buf[i]);
printf ("\n");
}
chan = 0;
if (ISTRUE (config.enable_chan1))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[2] << 24 | buf[3] << 16 | buf[4] << 8) /
255;
if (ISTRUE (config.enable_chan2))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[5] << 24 | buf[6] << 16 | buf[7] << 8) /
255;
if (ISTRUE (config.enable_chan3))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[8] << 24 | buf[9] << 16 | buf[10] << 8) /
255;
if (ISTRUE (config.enable_chan4))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[11] << 24 | buf[12] << 16 | buf[13] << 8) /
255;
if (ISTRUE (config.enable_chan5))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[14] << 24 | buf[15] << 16 | buf[16] << 8) /
255;
if (ISTRUE (config.enable_chan6))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[17] << 24 | buf[18] << 16 | buf[19] << 8) /
255;
if (ISTRUE (config.enable_chan7))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[20] << 24 | buf[21] << 16 | buf[22] << 8) /
255;
if (ISTRUE (config.enable_chan8))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB1 * (buf[23] << 24 | buf[24] << 16 | buf[25] << 8) /
255;
if (ISTRUE (config.enable_chan9))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB2 * (buf[26] << 24 | buf[27] << 16) / 32767;
if (ISTRUE (config.enable_chan10))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB2 * (buf[28] << 24 | buf[29] << 16) / 32767;
if (ISTRUE (config.enable_chan11))
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
OPENBCI_CALIB2 * (buf[28] << 24 | buf[31] << 16) / 32767;
if (ISTRUE (config.timestamp))
{
if (strcasecmp (config.timeref, "start") == 0)
get_monotonic_time (&toc, TIMESTAMP_REF_BOOT);
else if (strcasecmp (config.timeref, "boot") == 0)
get_monotonic_time (&toc, TIMESTAMP_REF_BOOT);
else if (strcasecmp (config.timeref, "epoch") == 0)
get_monotonic_time (&toc, TIMESTAMP_REF_EPOCH);
((FLOAT32_T *) (data->buf))[nchans * sample + (chan++)] =
get_elapsed_time (&tic, &toc);
}
sample++;
} /* while c<config.blocksize */
count += sample;
printf ("openbci2ft: sample count = %i\n", count);
/* create the request */
request = malloc (sizeof (message_t));
request->def = malloc (sizeof (messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
request->def->command = PUT_DAT;
request->def->bufsize = append (&request->buf, request->def->bufsize, data->def, sizeof (datadef_t));
request->def->bufsize = append (&request->buf, request->def->bufsize, data->buf, data->def->bufsize);
status = clientrequest (ftSocket, request, &response);
if (verbose > 0)
fprintf (stderr, "openbci2ft: clientrequest returned %d\n", status);
if (status)
{
fprintf (stderr, "openbci2ft: error in %s on line %d\n", __FILE__,
__LINE__);
exit (1);
}
if (status)
{
fprintf (stderr, "openbci2ft: error in %s on line %d\n", __FILE__,
__LINE__);
exit (1);
}
/* FIXME do someting with the response, i.e. check that it is OK */
cleanup_message (&request);
if (response == NULL || response->def == NULL
|| response->def->command != PUT_OK)
{
fprintf (stderr, "Error when writing samples.\n");
}
cleanup_message (&response);
} /* while keepRunning */
/* stop streaming data */
serialWrite (&SP, 1, "s");
cleanup_data (&data);
if (ftSocket > 0)
{
close_connection (ftSocket);
}
else
{
ft_stop_buffer_server (ftServer);
}
return 0;
} /* main */
int main(int argc, char **argv) {
host_t ftHost, rdaHost;
int rdaSocket;
ft_buffer_server_t *S;
if (sizeof(rda_msg_hdr_t)!=24) {
fprintf(stderr, "Compiled-in datatypes do not match RDA protocol\n");
exit(1);
}
if (argc!=5 && argc!=3) {
fputs(usage, stderr);
exit(1);
}
strncpy(rdaHost.name, argv[1], sizeof(rdaHost.name));
rdaHost.name[sizeof(rdaHost.name)-1]=0;
rdaHost.port = atoi(argv[2]);
if (argc==5) {
strncpy(ftHost.name, argv[3], sizeof(ftHost.name));
ftHost.name[sizeof(ftHost.name)-1]=0;
ftHost.port = atoi(argv[4]);
} else {
strcpy(ftHost.name, "-");
ftHost.port = 1972;
}
/* this isn't a FieldTrip connection, but we can use the same function */
rdaSocket = open_connection(rdaHost.name, rdaHost.port);
if (rdaSocket < 0) {
fprintf(stderr, "Could not connect to RDA server at %s:%i\n", rdaHost.name, rdaHost.port);
return 1;
}
/* Spawn tcpserver or connect to remote buffer */
if (strcmp(ftHost.name, "-") == 0) {
S = ft_start_buffer_server(ftHost.port, NULL, NULL, NULL);
if (S==NULL) {
fprintf(stderr, "Could not start up a FieldTrip buffer serving at port %i\n", ftHost.port);
return 1;
}
ftSocket = 0;
printf("Streaming from %s:%i to local buffer on port %i\n", rdaHost.name, rdaHost.port, ftHost.port);
} else {
ftSocket = open_connection(ftHost.name, ftHost.port);
if (ftSocket < 0) {
fprintf(stderr, "Could not connect to FieldTrip buffer at %s:%i\n", ftHost.name, ftHost.port);
return 1;
}
printf("Streaming from %s:%i to remote buffer at %s:%i\n", rdaHost.name, rdaHost.port, ftHost.name, ftHost.port);
}
/* register CTRL-C handler */
signal(SIGINT, abortHandler);
printf("Starting to listen - press CTRL-C to quit\n");
while (keepRunning) {
rda_msg_hdr_t header;
char *buf;
int n,s;
n = bufread(rdaSocket, &header, sizeof(header));
if (n!=sizeof(header)) {
fprintf(stderr, "Error while reading packet header from the RDA server\n");
break;
}
if (memcmp(_rda_guid, header.guid, 16)!=0) {
int i;
fprintf(stderr, "Incorrect GUID in received packet:\n");
for (i=0;i<16;i++) {
fprintf(stderr, "0x%02x should be 0x%02x\n", header.guid[i], _rda_guid[i]);
}
break;
}
buf = (char *) malloc(header.nSize);
if (buf == NULL) {
fprintf(stderr, "Out of memory\n");
break;
}
memcpy(buf, &header, sizeof(header));
s = header.nSize - sizeof(header);
n = bufread(rdaSocket, buf + sizeof(header), s);
if (s!=n) {
fprintf(stderr, "Error while reading packet remainder from the RDA server\n");
free(buf);
break;
}
switch(header.nType) {
case RDA_START_MSG:
handleStartPacket(ftSocket, header.nSize, buf);
break;
case RDA_INT_MSG:
case RDA_FLOAT_MSG:
handleDataPacket(ftSocket, header.nSize, buf);
break;
case RDA_STOP_MSG:
printf("\nRemote Data Acquisition stopped\n\n");
break;
default:
fprintf(stderr, "Unrecognized packet type (%i), has size %i - exiting\n", header.nType, header.nSize);
keepRunning = 0;
break;
}
free(buf);
}
close_connection(rdaSocket);
if (ftSocket > 0) {
close_connection(ftSocket);
} else {
ft_stop_buffer_server(S);
}
return 0;
}
int main(int argc, char *argv[])
{
int n, i, c, sample = 0, status = 0, verbose = 0;
unsigned char buf[BUFLEN], byte;
SerialPort SP;
host_t host;
/* these represent the acquisition system properties */
int nchans = OPENBCI_NCHANS;
int blocksize = BLOCKSIZE;
float fsample = OPENBCI_FSAMPLE;
/* these are used in the communication with the FT buffer and represent statefull information */
int ftSocket = -1;
ft_buffer_server_t *ftServer;
message_t *request = NULL;
message_t *response = NULL;
header_t *header = NULL;
data_t *data = NULL;
if (argc<2) {
printf(usage);
exit(0);
}
if (argc>2)
strcpy(host.name, argv[2]);
else {
strcpy(host.name, FTHOST);
}
if (argc>3)
host.port = atoi(argv[3]);
else {
host.port = FTPORT;
}
fprintf(stderr, "openbci2ft: device = %s\n", argv[1]);
fprintf(stderr, "openbci2ft: hostname = %s\n", host.name);
fprintf(stderr, "openbci2ft: port = %d\n", host.port);
/* Spawn tcpserver or connect to remote buffer */
if (strcmp(host.name, "-") == 0) {
ftServer = ft_start_buffer_server(host.port, NULL, NULL, NULL);
if (ftServer==NULL) {
fprintf(stderr, "openbci2ft: could not start up a local buffer serving at port %i\n", host.port);
return 1;
}
ftSocket = 0;
printf("openbci2ft: streaming to local buffer on port %i\n", host.port);
}
else {
ftSocket = open_connection(host.name, host.port);
if (ftSocket < 0) {
fprintf(stderr, "openbci2ft: could not connect to remote buffer at %s:%i\n", host.name, host.port);
return 1;
}
printf("openbci2ft: streaming to remote buffer at %s:%i\n", host.name, host.port);
}
/* allocate the elements that will be used in the communication to the FT buffer */
request = malloc(sizeof(message_t));
request->def = malloc(sizeof(messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
header = malloc(sizeof(header_t));
header->def = malloc(sizeof(headerdef_t));
header->buf = NULL;
data = malloc(sizeof(data_t));
data->def = malloc(sizeof(datadef_t));
data->buf = NULL;
/* define the header */
header->def->nchans = nchans;
header->def->fsample = fsample;
header->def->nsamples = 0;
header->def->nevents = 0;
header->def->data_type = DATATYPE_FLOAT32;
header->def->bufsize = 0;
/* define the constant part of the data and allocate space for the variable part */
data->def->nchans = nchans;
data->def->nsamples = blocksize;
data->def->data_type = DATATYPE_FLOAT32;
data->def->bufsize = WORDSIZE_FLOAT32*nchans*blocksize;
data->buf = malloc(data->def->bufsize);
/* initialization phase, send the header */
request->def->command = PUT_HDR;
request->def->bufsize = append(&request->buf, request->def->bufsize, header->def, sizeof(headerdef_t));
request->def->bufsize = append(&request->buf, request->def->bufsize, header->buf, header->def->bufsize);
/* this is not needed any more */
cleanup_header(&header);
status = clientrequest(ftSocket, request, &response);
if (verbose>0)
fprintf(stderr, "openbci2ft: clientrequest returned %d\n", status);
if (status) {
fprintf(stderr, "openbci2ft: could not send request to buffer\n");
exit(1);
}
if (status || response==NULL || response->def == NULL) {
fprintf(stderr, "openbci2ft: error in %s on line %d\n", __FILE__, __LINE__);
exit(1);
}
cleanup_message(&request);
if (response->def->command != PUT_OK) {
fprintf(stderr, "openbci2ft: error in 'put header' request.\n");
exit(1);
}
cleanup_message(&response);
/* open the serial port */
fprintf(stderr, "openbci2ft: opening serial port ...\n");
if (!serialOpenByName(&SP, argv[1])) {
fprintf(stderr, "Could not open serial port %s\n", argv[1]);
return 1;
}
if (!serialSetParameters(&SP, 115200, 8, 0, 0, 0)) {
fprintf(stderr, "Could not modify serial port parameters\n");
return 1;
}
fprintf(stderr, "openbci2ft: opening serial port ... ok\n");
/* 8-bit board will always be initialized upon opening serial port, 32-bit board needs explicit initialization */
fprintf(stderr, "openbci2ft: initializing ...\n");
serialWrite(&SP, 1, "v");
fprintf(stderr, "openbci2ft: press reset on the OpenBCI board if this takes too long\n");
usleep(1000);
/* wait for '$$$' which indicates that the OpenBCI has been initialized */
c = 0;
while (c!=3) {
n = serialRead(&SP, 1, &byte);
if (n==1) {
if (byte=='$')
c++;
else
c = 0;
}
} /* while waiting for '$$$' */
fprintf(stderr, "openbci2ft: initializing ... ok\n");
printf("Starting to listen - press CTRL-C to quit\n");
/* register CTRL-C handler */
signal(SIGINT, abortHandler);
/* start streaming data */
serialWrite(&SP, 1, "b");
while (keepRunning) {
c = 0;
while (c<blocksize) {
/* wait for the first byte of the packet */
buf[0]=0;
while (buf[0]!=0xA0) {
if (serialInputPending(&SP))
n = serialRead(&SP, 1, buf);
else
usleep(1000);
} /* while */
/* read the remaining 32 bytes of the packet */
while (n<BUFLEN)
if (serialInputPending(&SP))
n += serialRead(&SP, (BUFLEN-n), buf+n);
else
usleep(100000);
if (verbose>1) {
for (i=0; i<BUFLEN; i++)
printf("%02x ", buf[i]);
printf("\n");
}
((FLOAT32_T *)(data->buf))[nchans*c + 0] = OPENBCI_CALIB1 * (buf[ 2]<<24 | buf[ 3]<<16 | buf[ 4]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 1] = OPENBCI_CALIB1 * (buf[ 5]<<24 | buf[ 6]<<16 | buf[ 7]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 2] = OPENBCI_CALIB1 * (buf[ 8]<<24 | buf[ 9]<<16 | buf[10]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 3] = OPENBCI_CALIB1 * (buf[11]<<24 | buf[12]<<16 | buf[13]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 4] = OPENBCI_CALIB1 * (buf[14]<<24 | buf[15]<<16 | buf[16]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 5] = OPENBCI_CALIB1 * (buf[17]<<24 | buf[18]<<16 | buf[19]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 6] = OPENBCI_CALIB1 * (buf[20]<<24 | buf[21]<<16 | buf[22]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 7] = OPENBCI_CALIB1 * (buf[23]<<24 | buf[24]<<16 | buf[25]<<8)/255;
((FLOAT32_T *)(data->buf))[nchans*c + 8] = OPENBCI_CALIB2 * (buf[26]<<24 | buf[27]<<16)/32767;
((FLOAT32_T *)(data->buf))[nchans*c + 9] = OPENBCI_CALIB2 * (buf[28]<<24 | buf[29]<<16)/32767;
((FLOAT32_T *)(data->buf))[nchans*c +10] = OPENBCI_CALIB2 * (buf[28]<<24 | buf[31]<<16)/32767;
c++;
} /* while c<blocksize */
sample += blocksize;
printf("openbci2ft: sample count = %i\n", sample);
/*
* Header
* Byte 1: 0xA0
* Byte 2: Sample Number
*
* EEG Data
* Note: values are 24-bit signed, MSB first
* Bytes 3-5: Data value for EEG channel 1
* Bytes 6-8: Data value for EEG channel 2
* Bytes 9-11: Data value for EEG channel 3
* Bytes 12-14: Data value for EEG channel 4
* Bytes 15-17: Data value for EEG channel 5
* Bytes 18-20: Data value for EEG channel 6
* Bytes 21-23: Data value for EEG channel 6
* Bytes 24-26: Data value for EEG channel 8
*
* Accelerometer Data
* Note: values are 16-bit signed, MSB first
* Bytes 27-28: Data value for accelerometer channel X
* Bytes 29-30: Data value for accelerometer channel Y
* Bytes 31-32: Data value for accelerometer channel Z
*
* Footer
* Byte 33: 0xC0
*/
/* create the request */
request = malloc(sizeof(message_t));
request->def = malloc(sizeof(messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
request->def->command = PUT_DAT;
request->def->bufsize = append(&request->buf, request->def->bufsize, data->def, sizeof(datadef_t));
request->def->bufsize = append(&request->buf, request->def->bufsize, data->buf, data->def->bufsize);
status = clientrequest(ftSocket, request, &response);
if (verbose>0)
fprintf(stderr, "openbci2ft: clientrequest returned %d\n", status);
if (status) {
fprintf(stderr, "openbci2ft: error in %s on line %d\n", __FILE__, __LINE__);
exit(1);
}
if (status) {
fprintf(stderr, "openbci2ft: error in %s on line %d\n", __FILE__, __LINE__);
exit(1);
}
/* FIXME do someting with the response, i.e. check that it is OK */
cleanup_message(&request);
if (response == NULL || response->def == NULL || response->def->command!=PUT_OK) {
fprintf(stderr, "Error when writing samples.\n");
}
cleanup_message(&response);
} /* while keepRunning */
/* stop streaming data */
serialWrite(&SP, 1, "s");
cleanup_data(&data);
if (ftSocket > 0) {
close_connection(ftSocket);
} else {
ft_stop_buffer_server(ftServer);
}
return 0;
} /* main */
int main(int argc, char *argv[]) {
int port;
char *name = NULL;
union {
short word;
char bytes[2];
} endianTest;
endianTest.bytes[0] = 1;
endianTest.bytes[1] = 0;
if (endianTest.word == 1) {
strcpy(endianness, "little");
} else {
strcpy(endianness, "big");
}
/* verify that all datatypes have the expected syze in bytes */
check_datatypes();
#ifdef WIN32
timeBeginPeriod(1);
#endif
if (argc<2) {
fprintf(stderr, "Usage: recording <directory> [port/unix socket]\n");
return 1;
}
strncpy(baseDirectory, argv[1], sizeof(baseDirectory));
if (argc>2) {
port = atoi(argv[2]);
if (port == 0) {
name = argv[2];
}
} else {
port = 1972;
}
memset(queue, sizeof(queue), 0);
if (!write_contents()) goto cleanup;
S = ft_start_buffer_server(port, name, my_request_handler, NULL);
if (S==NULL) return 1;
signal(SIGINT, abortHandler);
while (keepRunning) {
if (queue[qReadPos].command == 0) {
usleep(1000);
} else {
switch(queue[qReadPos].command) {
case PUT_HDR:
if (setCounter>0) ft_storage_close(OS);
write_header_to_disk();
if (OS==NULL) {
fprintf(stderr, "!!!!!!!!!!!!! WARNING !!!!!!!!!!\n");
fprintf(stderr, "!! will NOT save this dataset !!\n");
fprintf(stderr, "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n");
}
break;
case PUT_DAT:
if (OS) write_samples_to_disk(queue[qReadPos].quantity, queue[qReadPos].t);
break;
case PUT_EVT:
if (OS) write_events_to_disk(queue[qReadPos].quantity, queue[qReadPos].t);
break;
}
queue[qReadPos].command = 0;
if (++qReadPos == QUEUE_SIZE) qReadPos = 0;
}
}
printf("Ctrl-C pressed -- stopping buffer server...\n");
if (setCounter>0 && OS!=NULL) ft_storage_close(OS);
ft_stop_buffer_server(S);
printf("Done.\n");
cleanup:
#ifdef WIN32
timeEndPeriod(1);
#endif
return 0;
}
int main(int argc, char *argv[])
{
struct sockaddr_in si_me, si_other;
socklen_t slen = sizeof(struct sockaddr_in);
int udpsocket, n;
char buf[BUFLEN];
struct {
uint16_t version;
uint16_t nchans;
uint16_t nbit;
uint16_t fsample;
uint16_t sec;
uint16_t smp;
} packet_v0;
struct {
uint8_t version;
uint8_t nchans;
uint16_t diagnostic_word;
uint16_t mode_word;
uint16_t fsample;
uint32_t smp;
} packet_v3;
/* this is the common denominator of packet format v0 and v3 */
struct {
uint16_t version;
uint16_t nchans;
uint16_t nbit;
uint16_t fsample;
uint32_t smp;
} packet;
int sample = 0, status = 0, verbose = 0;
host_t host;
/* these represent the acquisition system properties */
int nchans = 16; /* will be updated later on */
int fsample = 1000; /* will be updated later on */
int nbit = 16;
int blocksize = 43;
/* these are used in the communication with the FT buffer and represent statefull information */
int ftSocket = -1;
ft_buffer_server_t *ftServer;
message_t *request = NULL;
message_t *response = NULL;
header_t *header = NULL;
data_t *data = NULL;
printf(usage);
if (argc>1)
strcpy(host.name, argv[1]);
else {
strcpy(host.name, FTHOST);
}
if (argc>2)
host.port = atoi(argv[2]);
else {
host.port = FTPORT;
}
fprintf(stderr, "jaga2ft: hostname = %s\n", host.name);
fprintf(stderr, "jaga2ft: port = %d\n", host.port);
/* Spawn tcpserver or connect to remote buffer */
if (strcmp(host.name, "-") == 0) {
ftServer = ft_start_buffer_server(host.port, NULL, NULL, NULL);
if (ftServer==NULL) {
fprintf(stderr, "jaga2ft: could not start up a local buffer serving at port %i\n", host.port);
return 1;
}
ftSocket = 0;
printf("jaga2ft: streaming to local buffer on port %i\n", host.port);
}
else {
ftSocket = open_connection(host.name, host.port);
if (ftSocket < 0) {
fprintf(stderr, "jaga2ft: could not connect to remote buffer at %s:%i\n", host.name, host.port);
return 1;
}
printf("jaga2ft: streaming to remote buffer at %s:%i\n", host.name, host.port);
}
/* open the UDP server */
if ((udpsocket=socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP))==-1)
diep("socket udp");
int enable = 1;
if (setsockopt(udpsocket, SOL_SOCKET, SO_REUSEADDR, &enable, sizeof(int)) < 0)
diep("setsockopt");
memset((char *) &si_me, 0, sizeof(si_me));
si_me.sin_family = AF_INET;
si_me.sin_port = htons(JAGAPORT);
si_me.sin_addr.s_addr = htonl(INADDR_ANY);
if (bind(udpsocket, &si_me, sizeof(si_me))==-1)
diep("bind udp");
/* allocate the elements that will be used in the communication to the FT buffer */
request = malloc(sizeof(message_t));
request->def = malloc(sizeof(messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
header = malloc(sizeof(header_t));
header->def = malloc(sizeof(headerdef_t));
header->buf = NULL;
data = malloc(sizeof(data_t));
data->def = malloc(sizeof(datadef_t));
data->buf = NULL;
/* read the first packet to get some information */
if ((n=recvfrom(udpsocket, buf, BUFLEN, 0, &si_other, &slen))==-1)
diep("recvfrom()");
if (verbose>0)
printf("jaga2ft: received %d byte packet from %s:%d\n", n, inet_ntoa(si_other.sin_addr), ntohs(si_other.sin_port));
/* parse the UDP package */
if (buf[0]==0) {
packet_v0.version = *(uint16_t *)(buf+0);
packet_v0.nchans = *(uint16_t *)(buf+2);
packet_v0.nbit = *(uint16_t *)(buf+4);
packet_v0.fsample = *(uint16_t *)(buf+6);
packet_v0.sec = *(uint16_t *)(buf+8);
packet_v0.smp = *(uint16_t *)(buf+10);
/* the packets are quite similar, the data starts at the same location */
packet.version = packet_v0.version;
packet.nchans = packet_v0.nchans;
packet.nbit = packet_v0.nbit;
packet.fsample = packet_v0.fsample;
packet.smp = packet_v0.smp;
}
else if (buf[0]==3) {
packet_v3.version = *(uint8_t *)(buf+0);
packet_v3.nchans = *(uint8_t *)(buf+1);
packet_v3.diagnostic_word = *(uint16_t *)(buf+2);
packet_v3.mode_word = *(uint16_t *)(buf+4);
packet_v3.fsample = *(uint16_t *)(buf+6);
packet_v3.smp = *(uint32_t *)(buf+8);
/* the packets are quite similar, the data starts at the same location */
packet.version = packet_v3.version;
packet.nchans = packet_v3.nchans;
packet.nbit = 16;
packet.fsample = packet_v3.fsample;
packet.smp = packet_v3.smp;
}
else {
fprintf(stderr, "invalid packet version");
exit(1);
}
/* update the defaults */
nchans = packet.nchans;
fsample = packet.fsample;
/* define the header */
header->def->nchans = nchans;
header->def->nsamples = 0;
header->def->nevents = 0;
header->def->fsample = fsample;
header->def->data_type = DATATYPE_UINT16;
header->def->bufsize = 0;
/* define the constant part of the data and allocate space for the variable part */
data->def->nchans = nchans;
data->def->nsamples = blocksize;
data->def->data_type = DATATYPE_UINT16;
data->def->bufsize = WORDSIZE_UINT16*nchans*blocksize;
/* initialization phase, send the header */
request->def->command = PUT_HDR;
request->def->bufsize = append(&request->buf, request->def->bufsize, header->def, sizeof(headerdef_t));
request->def->bufsize = append(&request->buf, request->def->bufsize, header->buf, header->def->bufsize);
/* this is not needed any more */
cleanup_header(&header);
status = clientrequest(ftSocket, request, &response);
if (verbose>0) fprintf(stderr, "jaga2ft: clientrequest returned %d\n", status);
if (status) {
fprintf(stderr, "jaga2ft: could not send request to buffer\n");
exit(1);
}
if (status || response==NULL || response->def == NULL) {
fprintf(stderr, "jaga2ft: err2\n");
exit(1);
}
cleanup_message(&request);
if (response->def->command != PUT_OK) {
fprintf(stderr, "jaga2ft: error in 'put header' request.\n");
exit(1);
}
cleanup_message(&response);
/* register CTRL-C handler */
signal(SIGINT, abortHandler);
printf("Starting to listen - press CTRL-C to quit\n");
/* add a small pause between writing header + first data block */
usleep(200000);
while (keepRunning)
{
if (verbose>1)
for (n=0; n<12; n++)
printf("buf[%2u] = %hhu\n", n, buf[n]);
/* parse the UDP package */
if (buf[0]==0) {
packet_v0.version = *(uint16_t *)(buf+0);
packet_v0.nchans = *(uint16_t *)(buf+2);
packet_v0.nbit = *(uint16_t *)(buf+4);
packet_v0.fsample = *(uint16_t *)(buf+6);
packet_v0.sec = *(uint16_t *)(buf+8);
packet_v0.smp = *(uint16_t *)(buf+10);
/* the packets are quite similar, the data starts at the same location */
packet.version = packet_v0.version;
packet.nchans = packet_v0.nchans;
packet.nbit = packet_v0.nbit;
packet.fsample = packet_v0.fsample;
packet.smp = packet_v0.smp;
}
else if (buf[0]==3) {
packet_v3.version = *(uint8_t *)(buf+0);
packet_v3.nchans = *(uint8_t *)(buf+1);
packet_v3.diagnostic_word = *(uint16_t *)(buf+2);
packet_v3.mode_word = *(uint16_t *)(buf+4);
packet_v3.fsample = *(uint16_t *)(buf+6);
packet_v3.smp = *(uint32_t *)(buf+8);
/* the packets are quite similar, the data starts at the same location */
packet.version = packet_v3.version;
packet.nchans = packet_v3.nchans;
packet.nbit = 16;
packet.fsample = packet_v3.fsample;
packet.smp = packet_v3.smp;
}
else {
fprintf(stderr, "invalid packet version");
exit(1);
}
/* point to the data */
data->buf = (buf+12);
/* do some sanity checks */
if (packet.nchans!=nchans) {
fprintf(stderr, "jaga2ft: inconsistent number of channels %hu\n", packet.nchans);
exit(1);
}
if (packet.nbit!=nbit) {
fprintf(stderr, "jaga2ft: inconsistent number of bits %hu\n", packet.nbit);
exit(1);
}
if (packet.fsample!=fsample) {
fprintf(stderr, "jaga2ft: inconsistent sampling rate %hu\n", packet.fsample);
exit(1);
}
/* create the request */
request = malloc(sizeof(message_t));
request->def = malloc(sizeof(messagedef_t));
request->buf = NULL;
request->def->version = VERSION;
request->def->bufsize = 0;
request->def->command = PUT_DAT;
request->def->bufsize = append(&request->buf, request->def->bufsize, data->def, sizeof(datadef_t));
request->def->bufsize = append(&request->buf, request->def->bufsize, data->buf, data->def->bufsize);
status = clientrequest(ftSocket, request, &response);
if (verbose>0) fprintf(stderr, "jaga2ft: clientrequest returned %d\n", status);
if (status) {
fprintf(stderr, "jaga2ft: err3\n");
exit(1);
}
if (status) {
fprintf(stderr, "jaga2ft: err4\n");
exit(1);
}
sample += blocksize;
printf("jaga2ft: sample count = %i\n", sample);
/* FIXME do someting with the response, i.e. check that it is OK */
cleanup_message(&request);
if (response == NULL || response->def == NULL || response->def->command!=PUT_OK) {
fprintf(stderr, "Error when writing samples.\n");
}
cleanup_message(&response);
/* read the next packet */
if ((n=recvfrom(udpsocket, buf, BUFLEN, 0, &si_other, &slen))==-1)
diep("recvfrom()");
if (verbose>0)
printf("jaga2ft: received %d byte packet from %s:%d\n", n, inet_ntoa(si_other.sin_addr), ntohs(si_other.sin_port));
} /* while(1) */
data->buf = NULL; /* this is not allocated on the heap but pointing to somewhere on the stack */
cleanup_data(&data);
close(udpsocket);
if (ftSocket > 0) {
close_connection(ftSocket);
} else {
ft_stop_buffer_server(ftServer);
}
return 0;
}
