void DHT22Controller_handleI2CWrite(uint8_t package[], uint8_t packageLength)
{
// Example request bytes:
// 0 = ACTION
// 1 = PIN
if (packageLength != 2) return;
uint8_t action = package[0];
switch (action)
{
case ACTION_REGISTER_SENSOR:
{
uint8_t pin = package[1];
if (getPinIndex(pin) == -1)
{
_pins[_pinsIndex] = pin;
_cache[_pinsIndex][0] = 0; // Set default to "no success".
_pinsIndex++;
}
_pinForRead = pin;
break;
}
}
#if (DEBUG)
Serial.println("Set sensor PIN to " + String(_pinForRead));
#endif
}
void attachInterrupt(uint8_t pin, void (*function)(void), int mode)
{
volatile uint32_t *config;
uint32_t cfg, mask;
if (pin >= CORE_NUM_DIGITAL) return;
switch (mode) {
case CHANGE: mask = 0x0B; break;
case RISING: mask = 0x09; break;
case FALLING: mask = 0x0A; break;
case LOW: mask = 0x08; break;
case HIGH: mask = 0x0C; break;
default: return;
}
mask = (mask << 16) | 0x01000000;
config = portConfigRegister(pin);
#if defined(KINETISK)
attachInterruptVector(IRQ_PORTA, port_A_isr);
attachInterruptVector(IRQ_PORTB, port_B_isr);
attachInterruptVector(IRQ_PORTC, port_C_isr);
attachInterruptVector(IRQ_PORTD, port_D_isr);
attachInterruptVector(IRQ_PORTE, port_E_isr);
voidFuncPtr* isr_table = getIsrTable(config);
if(!isr_table) return;
uint32_t pin_index = getPinIndex(config);
__disable_irq();
cfg = *config;
cfg &= ~0x000F0000; // disable any previous interrupt
*config = cfg;
isr_table[pin_index] = function; // set the function pointer
cfg |= mask;
*config = cfg; // enable the new interrupt
__enable_irq();
#elif defined(KINETISL)
attachInterruptVector(IRQ_PORTA, porta_interrupt);
attachInterruptVector(IRQ_PORTCD, portcd_interrupt);
__disable_irq();
cfg = *config;
cfg &= ~0x000F0000; // disable any previous interrupt
*config = cfg;
intFunc[pin] = function; // set the function pointer
cfg |= mask;
*config = cfg; // enable the new interrupt
__enable_irq();
#endif
}
void detachInterrupt(uint8_t pin)
{
volatile uint32_t *config;
config = portConfigRegister(pin);
#if defined(KINETISK)
voidFuncPtr* isr_table = getIsrTable(config);
if(!isr_table) return;
uint32_t pin_index = getPinIndex(config);
__disable_irq();
*config = ((*config & ~0x000F0000) | 0x01000000);
isr_table[pin_index] = dummy_isr;
__enable_irq();
#elif defined(KINETISL)
__disable_irq();
*config = ((*config & ~0x000F0000) | 0x01000000);
intFunc[pin] = dummy_isr;
__enable_irq();
#endif
}
uint8_t DHT22Controller_handleI2CRead(uint8_t response[])
{
int pinIndex = getPinIndex(_pinForRead);
if (pinIndex == -1)
{
#if (DEBUG)
Serial.println("Cache value for " + String(_pinForRead) + " not found");
#endif
return 0;
}
#if (DEBUG)
Serial.println("Fetching cache value from index " + String(pinIndex));
#endif
for (int i = 0; i < RESPONSE_SIZE; i++)
{
response[i] = _cache[pinIndex][i];
}
return RESPONSE_SIZE;
}
