status_t
intel_extreme_init(intel_info &info)
{
CALLED();
info.aperture = gGART->map_aperture(info.pci->bus, info.pci->device,
info.pci->function, 0, &info.aperture_base);
if (info.aperture < B_OK) {
ERROR("error: could not map GART aperture!\n");
return info.aperture;
}
AreaKeeper sharedCreator;
info.shared_area = sharedCreator.Create("intel extreme shared info",
(void**)&info.shared_info, B_ANY_KERNEL_ADDRESS,
ROUND_TO_PAGE_SIZE(sizeof(intel_shared_info)) + 3 * B_PAGE_SIZE,
B_FULL_LOCK, 0);
if (info.shared_area < B_OK) {
ERROR("error: could not create shared area!\n");
gGART->unmap_aperture(info.aperture);
return info.shared_area;
}
memset((void*)info.shared_info, 0, sizeof(intel_shared_info));
int fbIndex = 0;
int mmioIndex = 1;
if (info.device_type.InFamily(INTEL_TYPE_9xx)) {
// For some reason Intel saw the need to change the order of the
// mappings with the introduction of the i9xx family
mmioIndex = 0;
fbIndex = 2;
}
// evaluate driver settings, if any
bool hardwareCursor;
read_settings(hardwareCursor);
// memory mapped I/O
// TODO: registers are mapped twice (by us and intel_gart), maybe we
// can share it between the drivers
AreaKeeper mmioMapper;
info.registers_area = mmioMapper.Map("intel extreme mmio",
info.pci->u.h0.base_registers[mmioIndex],
info.pci->u.h0.base_register_sizes[mmioIndex],
B_ANY_KERNEL_ADDRESS, B_KERNEL_READ_AREA | B_KERNEL_WRITE_AREA,
(void**)&info.registers);
if (mmioMapper.InitCheck() < B_OK) {
ERROR("error: could not map memory I/O!\n");
gGART->unmap_aperture(info.aperture);
return info.registers_area;
}
uint32* blocks = info.shared_info->register_blocks;
blocks[REGISTER_BLOCK(REGS_FLAT)] = 0;
// setup the register blocks for the different architectures
if (info.device_type.HasPlatformControlHub()) {
// PCH based platforms (IronLake and up)
blocks[REGISTER_BLOCK(REGS_NORTH_SHARED)]
= PCH_NORTH_SHARED_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_NORTH_PIPE_AND_PORT)]
= PCH_NORTH_PIPE_AND_PORT_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_NORTH_PLANE_CONTROL)]
= PCH_NORTH_PLANE_CONTROL_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_SOUTH_SHARED)]
= PCH_SOUTH_SHARED_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_SOUTH_TRANSCODER_PORT)]
= PCH_SOUTH_TRANSCODER_AND_PORT_REGISTER_BASE;
} else {
// (G)MCH/ICH based platforms
blocks[REGISTER_BLOCK(REGS_NORTH_SHARED)]
= MCH_SHARED_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_NORTH_PIPE_AND_PORT)]
= MCH_PIPE_AND_PORT_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_NORTH_PLANE_CONTROL)]
= MCH_PLANE_CONTROL_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_SOUTH_SHARED)]
= ICH_SHARED_REGISTER_BASE;
blocks[REGISTER_BLOCK(REGS_SOUTH_TRANSCODER_PORT)]
= ICH_PORT_REGISTER_BASE;
}
// make sure bus master, memory-mapped I/O, and frame buffer is enabled
set_pci_config(info.pci, PCI_command, 2, get_pci_config(info.pci,
PCI_command, 2) | PCI_command_io | PCI_command_memory
| PCI_command_master);
// reserve ring buffer memory (currently, this memory is placed in
// the graphics memory), but this could bring us problems with
// write combining...
ring_buffer &primary = info.shared_info->primary_ring_buffer;
if (intel_allocate_memory(info, 16 * B_PAGE_SIZE, 0, 0,
(addr_t*)&primary.base) == B_OK) {
primary.register_base = INTEL_PRIMARY_RING_BUFFER;
primary.size = 16 * B_PAGE_SIZE;
primary.offset = (addr_t)primary.base - info.aperture_base;
}
// Enable clock gating
intel_en_gating(info);
// Enable automatic gpu downclocking if we can to save power
intel_en_downclock(info);
// no errors, so keep areas and mappings
sharedCreator.Detach();
mmioMapper.Detach();
aperture_info apertureInfo;
gGART->get_aperture_info(info.aperture, &apertureInfo);
info.shared_info->registers_area = info.registers_area;
info.shared_info->graphics_memory = (uint8*)info.aperture_base;
info.shared_info->physical_graphics_memory = apertureInfo.physical_base;
info.shared_info->graphics_memory_size = apertureInfo.size;
info.shared_info->frame_buffer = 0;
info.shared_info->dpms_mode = B_DPMS_ON;
info.shared_info->got_vbt = get_lvds_mode_from_bios(
&info.shared_info->current_mode);
/* at least 855gm can't drive more than one head at time */
if (info.device_type.InFamily(INTEL_TYPE_8xx))
info.shared_info->single_head_locked = 1;
if (info.device_type.InFamily(INTEL_TYPE_9xx)) {
info.shared_info->pll_info.reference_frequency = 96000; // 96 kHz
info.shared_info->pll_info.max_frequency = 400000;
// 400 MHz RAM DAC speed
info.shared_info->pll_info.min_frequency = 20000; // 20 MHz
} else {
info.shared_info->pll_info.reference_frequency = 48000; // 48 kHz
info.shared_info->pll_info.max_frequency = 350000;
// 350 MHz RAM DAC speed
info.shared_info->pll_info.min_frequency = 25000; // 25 MHz
}
info.shared_info->pll_info.divisor_register = INTEL_DISPLAY_A_PLL_DIVISOR_0;
info.shared_info->device_type = info.device_type;
#ifdef __HAIKU__
strlcpy(info.shared_info->device_identifier, info.device_identifier,
sizeof(info.shared_info->device_identifier));
#else
strcpy(info.shared_info->device_identifier, info.device_identifier);
#endif
// setup overlay registers
status_t status = intel_allocate_memory(info, B_PAGE_SIZE, 0,
intel_uses_physical_overlay(*info.shared_info)
? B_APERTURE_NEED_PHYSICAL : 0,
(addr_t*)&info.overlay_registers,
&info.shared_info->physical_overlay_registers);
if (status == B_OK) {
info.shared_info->overlay_offset = (addr_t)info.overlay_registers
- info.aperture_base;
init_overlay_registers(info.overlay_registers);
} else {
ERROR("error: could not allocate overlay memory! %s\n",
strerror(status));
}
// Allocate hardware status page and the cursor memory
if (intel_allocate_memory(info, B_PAGE_SIZE, 0, B_APERTURE_NEED_PHYSICAL,
(addr_t*)info.shared_info->status_page,
&info.shared_info->physical_status_page) == B_OK) {
// TODO: set status page
}
if (hardwareCursor) {
intel_allocate_memory(info, B_PAGE_SIZE, 0, B_APERTURE_NEED_PHYSICAL,
(addr_t*)&info.shared_info->cursor_memory,
&info.shared_info->physical_cursor_memory);
}
init_interrupt_handler(info);
TRACE("%s: completed successfully!\n", __func__);
return B_OK;
}
static void
determine_memory_sizes(intel_info &info, size_t >tSize, size_t &stolenSize)
{
// read stolen memory from the PCI configuration of the PCI bridge
uint8 controlRegister = INTEL_GRAPHICS_MEMORY_CONTROL;
if ((info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_SNB)
controlRegister = SNB_GRAPHICS_MEMORY_CONTROL;
uint16 memoryConfig = get_pci_config(info.bridge, controlRegister, 2);
size_t memorySize = 1 << 20; // 1 MB
gttSize = 0;
stolenSize = 0;
if (info.type == INTEL_TYPE_965) {
switch (memoryConfig & i965_GTT_MASK) {
case i965_GTT_128K:
gttSize = 128 << 10;
break;
case i965_GTT_256K:
gttSize = 256 << 10;
break;
case i965_GTT_512K:
gttSize = 512 << 10;
break;
}
} else if (info.type == INTEL_TYPE_G33
|| (info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_IGD) {
switch (memoryConfig & G33_GTT_MASK) {
case G33_GTT_1M:
gttSize = 1 << 20;
break;
case G33_GTT_2M:
gttSize = 2 << 20;
break;
}
} else if ((info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_G4x
|| (info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_ILK) {
switch (memoryConfig & G4X_GTT_MASK) {
case G4X_GTT_NONE:
gttSize = 0;
break;
case G4X_GTT_1M_NO_IVT:
gttSize = 1 << 20;
break;
case G4X_GTT_2M_NO_IVT:
case G4X_GTT_2M_IVT:
gttSize = 2 << 20;
break;
case G4X_GTT_3M_IVT:
gttSize = 3 << 20;
break;
case G4X_GTT_4M_IVT:
gttSize = 4 << 20;
break;
}
} else if ((info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_SNB) {
switch (memoryConfig & SNB_GTT_SIZE_MASK) {
case SNB_GTT_SIZE_NONE:
gttSize = 0;
break;
case SNB_GTT_SIZE_1MB:
gttSize = 1 << 20;
break;
case SNB_GTT_SIZE_2MB:
gttSize = 2 << 20;
break;
}
} else {
// older models have the GTT as large as their frame buffer mapping
// TODO: check if the i9xx version works with the i8xx chips as well
size_t frameBufferSize = 0;
if ((info.type & INTEL_TYPE_8xx) != 0) {
if (info.type == INTEL_TYPE_83x
&& (memoryConfig & MEMORY_MASK) == i830_FRAME_BUFFER_64M)
frameBufferSize = 64 << 20;
else
frameBufferSize = 128 << 20;
} else if ((info.type & INTEL_TYPE_9xx) != 0)
frameBufferSize = info.display.u.h0.base_register_sizes[2];
TRACE("frame buffer size %lu MB\n", frameBufferSize >> 20);
gttSize = frameBufferSize / 1024;
}
// TODO: test with different models!
if (info.type == INTEL_TYPE_83x) {
// Older chips
switch (memoryConfig & STOLEN_MEMORY_MASK) {
case i830_LOCAL_MEMORY_ONLY:
// TODO: determine its size!
dprintf("intel_gart: getting local memory size not "
"implemented.\n");
break;
case i830_STOLEN_512K:
memorySize >>= 1;
break;
case i830_STOLEN_1M:
// default case
break;
case i830_STOLEN_8M:
memorySize *= 8;
break;
}
} else if ((info.type & INTEL_TYPE_GROUP_MASK) == INTEL_TYPE_SNB) {