void
brw_workaround_depthstencil_alignment(struct brw_context *brw)
{
struct intel_context *intel = &brw->intel;
struct gl_context *ctx = &intel->ctx;
struct gl_framebuffer *fb = ctx->DrawBuffer;
bool rebase_depth = false;
bool rebase_stencil = false;
struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
struct intel_mipmap_tree *depth_mt = NULL;
struct intel_mipmap_tree *stencil_mt = get_stencil_miptree(stencil_irb);
uint32_t tile_x = 0, tile_y = 0, stencil_tile_x = 0, stencil_tile_y = 0;
uint32_t stencil_draw_x = 0, stencil_draw_y = 0;
if (depth_irb)
depth_mt = depth_irb->mt;
uint32_t tile_mask_x, tile_mask_y;
brw_get_depthstencil_tile_masks(depth_mt, stencil_mt,
&tile_mask_x, &tile_mask_y);
if (depth_irb) {
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
/* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
* (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
* Coordinate Offset X/Y":
*
* "The 3 LSBs of both offsets must be zero to ensure correct
* alignment"
*/
if (tile_x & 7 || tile_y & 7)
rebase_depth = true;
/* We didn't even have intra-tile offsets before g45. */
if (intel->gen == 4 && !intel->is_g4x) {
if (tile_x || tile_y)
rebase_depth = true;
}
if (rebase_depth) {
perf_debug("HW workaround: blitting depth level %d to a temporary "
"to fix alignment (depth tile offset %d,%d)\n",
depth_irb->mt_level, tile_x, tile_y);
intel_renderbuffer_move_to_temp(intel, depth_irb);
/* In the case of stencil_irb being the same packed depth/stencil
* texture but not the same rb, make it point at our rebased mt, too.
*/
if (stencil_irb &&
stencil_irb != depth_irb &&
stencil_irb->mt == depth_mt) {
intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
intel_renderbuffer_set_draw_offset(stencil_irb);
}
stencil_mt = get_stencil_miptree(stencil_irb);
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
}
if (stencil_irb) {
stencil_mt = get_stencil_miptree(stencil_irb);
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
int stencil_tile_x = stencil_draw_x & tile_mask_x;
int stencil_tile_y = stencil_draw_y & tile_mask_y;
/* If stencil doesn't match depth, then we'll need to rebase stencil
* as well. (if we hadn't decided to rebase stencil before, the
* post-stencil depth test will also rebase depth to try to match it
* up).
*/
if (tile_x != stencil_tile_x ||
tile_y != stencil_tile_y) {
rebase_stencil = true;
}
}
}
/* If we have (just) stencil, check it for ignored low bits as well */
if (stencil_irb) {
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
stencil_tile_x = stencil_draw_x & tile_mask_x;
stencil_tile_y = stencil_draw_y & tile_mask_y;
if (stencil_tile_x & 7 || stencil_tile_y & 7)
rebase_stencil = true;
if (intel->gen == 4 && !intel->is_g4x) {
if (stencil_tile_x || stencil_tile_y)
rebase_stencil = true;
}
}
if (rebase_stencil) {
perf_debug("HW workaround: blitting stencil level %d to a temporary "
"to fix alignment (stencil tile offset %d,%d)\n",
stencil_irb->mt_level, stencil_tile_x, stencil_tile_y);
intel_renderbuffer_move_to_temp(intel, stencil_irb);
stencil_mt = get_stencil_miptree(stencil_irb);
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
stencil_tile_x = stencil_draw_x & tile_mask_x;
stencil_tile_y = stencil_draw_y & tile_mask_y;
if (depth_irb && depth_irb->mt == stencil_irb->mt) {
intel_miptree_reference(&depth_irb->mt, stencil_irb->mt);
intel_renderbuffer_set_draw_offset(depth_irb);
} else if (depth_irb && !rebase_depth) {
if (tile_x != stencil_tile_x ||
tile_y != stencil_tile_y) {
perf_debug("HW workaround: blitting depth level %d to a temporary "
"to match stencil level %d alignment (depth tile offset "
"%d,%d, stencil offset %d,%d)\n",
depth_irb->mt_level,
stencil_irb->mt_level,
tile_x, tile_y,
stencil_tile_x, stencil_tile_y);
intel_renderbuffer_move_to_temp(intel, depth_irb);
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
if (stencil_irb && stencil_irb->mt == depth_mt) {
intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
intel_renderbuffer_set_draw_offset(stencil_irb);
}
WARN_ONCE(stencil_tile_x != tile_x ||
stencil_tile_y != tile_y,
"Rebased stencil tile offset (%d,%d) doesn't match depth "
"tile offset (%d,%d).\n",
stencil_tile_x, stencil_tile_y,
tile_x, tile_y);
}
}
}
if (!depth_irb) {
tile_x = stencil_tile_x;
tile_y = stencil_tile_y;
}
/* While we just tried to get everything aligned, we may have failed to do
* so in the case of rendering to array or 3D textures, where nonzero faces
* will still have an offset post-rebase. At least give an informative
* warning.
*/
WARN_ONCE((tile_x & 7) || (tile_y & 7),
"Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
"Truncating offset, bad rendering may occur.\n");
tile_x &= ~7;
tile_y &= ~7;
/* Now, after rebasing, save off the new dephtstencil state so the hardware
* packets can just dereference that without re-calculating tile offsets.
*/
brw->depthstencil.tile_x = tile_x;
brw->depthstencil.tile_y = tile_y;
brw->depthstencil.depth_offset = 0;
brw->depthstencil.stencil_offset = 0;
brw->depthstencil.hiz_offset = 0;
brw->depthstencil.depth_mt = NULL;
brw->depthstencil.stencil_mt = NULL;
brw->depthstencil.hiz_mt = NULL;
if (depth_irb) {
depth_mt = depth_irb->mt;
brw->depthstencil.depth_mt = depth_mt;
brw->depthstencil.depth_offset =
intel_region_get_aligned_offset(depth_mt->region,
depth_irb->draw_x & ~tile_mask_x,
depth_irb->draw_y & ~tile_mask_y,
false);
if (depth_mt->hiz_mt) {
brw->depthstencil.hiz_mt = depth_mt->hiz_mt;
brw->depthstencil.hiz_offset =
intel_region_get_aligned_offset(depth_mt->region,
depth_irb->draw_x & ~tile_mask_x,
(depth_irb->draw_y & ~tile_mask_y) /
2,
false);
}
}
if (stencil_irb) {
stencil_mt = get_stencil_miptree(stencil_irb);
brw->depthstencil.stencil_mt = stencil_mt;
if (stencil_mt->format == MESA_FORMAT_S8) {
/* Note: we can't compute the stencil offset using
* intel_region_get_aligned_offset(), because stencil_region claims
* that the region is untiled even though it's W tiled.
*/
brw->depthstencil.stencil_offset =
(stencil_draw_y & ~tile_mask_y) * stencil_mt->region->pitch +
(stencil_draw_x & ~tile_mask_x) * 64;
}
}
}
void
brw_workaround_depthstencil_alignment(struct brw_context *brw,
GLbitfield clear_mask)
{
struct gl_context *ctx = &brw->ctx;
struct gl_framebuffer *fb = ctx->DrawBuffer;
bool rebase_depth = false;
bool rebase_stencil = false;
struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
struct intel_mipmap_tree *depth_mt = NULL;
struct intel_mipmap_tree *stencil_mt = get_stencil_miptree(stencil_irb);
uint32_t tile_x = 0, tile_y = 0, stencil_tile_x = 0, stencil_tile_y = 0;
uint32_t stencil_draw_x = 0, stencil_draw_y = 0;
bool invalidate_depth = clear_mask & BUFFER_BIT_DEPTH;
bool invalidate_stencil = clear_mask & BUFFER_BIT_STENCIL;
if (depth_irb)
depth_mt = depth_irb->mt;
/* Initialize brw->depthstencil to 'nop' workaround state.
*/
brw->depthstencil.tile_x = 0;
brw->depthstencil.tile_y = 0;
brw->depthstencil.depth_offset = 0;
brw->depthstencil.stencil_offset = 0;
brw->depthstencil.hiz_offset = 0;
brw->depthstencil.depth_mt = NULL;
brw->depthstencil.stencil_mt = NULL;
if (depth_irb)
brw->depthstencil.depth_mt = depth_mt;
if (stencil_irb)
brw->depthstencil.stencil_mt = get_stencil_miptree(stencil_irb);
/* Gen7+ doesn't require the workarounds, since we always program the
* surface state at the start of the whole surface.
*/
if (brw->gen >= 7)
return;
/* Check if depth buffer is in depth/stencil format. If so, then it's only
* safe to invalidate it if we're also clearing stencil, and both depth_irb
* and stencil_irb point to the same miptree.
*
* Note: it's not sufficient to check for the case where
* _mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL,
* because this fails to catch depth/stencil buffers on hardware that uses
* separate stencil. To catch that case, we check whether
* depth_mt->stencil_mt is non-NULL.
*/
if (depth_irb && invalidate_depth &&
(_mesa_get_format_base_format(depth_mt->format) == GL_DEPTH_STENCIL ||
depth_mt->stencil_mt)) {
invalidate_depth = invalidate_stencil && depth_irb && stencil_irb
&& depth_irb->mt == stencil_irb->mt;
}
uint32_t tile_mask_x, tile_mask_y;
brw_get_depthstencil_tile_masks(depth_mt,
depth_mt ? depth_irb->mt_level : 0,
depth_mt ? depth_irb->mt_layer : 0,
stencil_mt,
&tile_mask_x, &tile_mask_y);
if (depth_irb) {
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
/* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
* (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
* Coordinate Offset X/Y":
*
* "The 3 LSBs of both offsets must be zero to ensure correct
* alignment"
*/
if (tile_x & 7 || tile_y & 7)
rebase_depth = true;
/* We didn't even have intra-tile offsets before g45. */
if (!brw->has_surface_tile_offset) {
if (tile_x || tile_y)
rebase_depth = true;
}
if (rebase_depth) {
perf_debug("HW workaround: blitting depth level %d to a temporary "
"to fix alignment (depth tile offset %d,%d)\n",
depth_irb->mt_level, tile_x, tile_y);
intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);
/* In the case of stencil_irb being the same packed depth/stencil
* texture but not the same rb, make it point at our rebased mt, too.
*/
if (stencil_irb &&
stencil_irb != depth_irb &&
stencil_irb->mt == depth_mt) {
intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
intel_renderbuffer_set_draw_offset(stencil_irb);
}
stencil_mt = get_stencil_miptree(stencil_irb);
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
}
if (stencil_irb) {
stencil_mt = get_stencil_miptree(stencil_irb);
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
int stencil_tile_x = stencil_draw_x & tile_mask_x;
int stencil_tile_y = stencil_draw_y & tile_mask_y;
/* If stencil doesn't match depth, then we'll need to rebase stencil
* as well. (if we hadn't decided to rebase stencil before, the
* post-stencil depth test will also rebase depth to try to match it
* up).
*/
if (tile_x != stencil_tile_x ||
tile_y != stencil_tile_y) {
rebase_stencil = true;
}
}
}
/* If we have (just) stencil, check it for ignored low bits as well */
if (stencil_irb) {
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
stencil_tile_x = stencil_draw_x & tile_mask_x;
stencil_tile_y = stencil_draw_y & tile_mask_y;
if (stencil_tile_x & 7 || stencil_tile_y & 7)
rebase_stencil = true;
if (!brw->has_surface_tile_offset) {
if (stencil_tile_x || stencil_tile_y)
rebase_stencil = true;
}
}
if (rebase_stencil) {
perf_debug("HW workaround: blitting stencil level %d to a temporary "
"to fix alignment (stencil tile offset %d,%d)\n",
stencil_irb->mt_level, stencil_tile_x, stencil_tile_y);
intel_renderbuffer_move_to_temp(brw, stencil_irb, invalidate_stencil);
stencil_mt = get_stencil_miptree(stencil_irb);
intel_miptree_get_image_offset(stencil_mt,
stencil_irb->mt_level,
stencil_irb->mt_layer,
&stencil_draw_x, &stencil_draw_y);
stencil_tile_x = stencil_draw_x & tile_mask_x;
stencil_tile_y = stencil_draw_y & tile_mask_y;
if (depth_irb && depth_irb->mt == stencil_irb->mt) {
intel_miptree_reference(&depth_irb->mt, stencil_irb->mt);
intel_renderbuffer_set_draw_offset(depth_irb);
} else if (depth_irb && !rebase_depth) {
if (tile_x != stencil_tile_x ||
tile_y != stencil_tile_y) {
perf_debug("HW workaround: blitting depth level %d to a temporary "
"to match stencil level %d alignment (depth tile offset "
"%d,%d, stencil offset %d,%d)\n",
depth_irb->mt_level,
stencil_irb->mt_level,
tile_x, tile_y,
stencil_tile_x, stencil_tile_y);
intel_renderbuffer_move_to_temp(brw, depth_irb, invalidate_depth);
tile_x = depth_irb->draw_x & tile_mask_x;
tile_y = depth_irb->draw_y & tile_mask_y;
if (stencil_irb && stencil_irb->mt == depth_mt) {
intel_miptree_reference(&stencil_irb->mt, depth_irb->mt);
intel_renderbuffer_set_draw_offset(stencil_irb);
}
WARN_ONCE(stencil_tile_x != tile_x ||
stencil_tile_y != tile_y,
"Rebased stencil tile offset (%d,%d) doesn't match depth "
"tile offset (%d,%d).\n",
stencil_tile_x, stencil_tile_y,
tile_x, tile_y);
}
}
}
if (!depth_irb) {
tile_x = stencil_tile_x;
tile_y = stencil_tile_y;
}
/* While we just tried to get everything aligned, we may have failed to do
* so in the case of rendering to array or 3D textures, where nonzero faces
* will still have an offset post-rebase. At least give an informative
* warning.
*/
WARN_ONCE((tile_x & 7) || (tile_y & 7),
"Depth/stencil buffer needs alignment to 8-pixel boundaries.\n"
"Truncating offset, bad rendering may occur.\n");
tile_x &= ~7;
tile_y &= ~7;
/* Now, after rebasing, save off the new dephtstencil state so the hardware
* packets can just dereference that without re-calculating tile offsets.
*/
brw->depthstencil.tile_x = tile_x;
brw->depthstencil.tile_y = tile_y;
if (depth_irb) {
depth_mt = depth_irb->mt;
brw->depthstencil.depth_mt = depth_mt;
brw->depthstencil.depth_offset =
intel_region_get_aligned_offset(depth_mt->region,
depth_irb->draw_x & ~tile_mask_x,
depth_irb->draw_y & ~tile_mask_y,
false);
if (intel_renderbuffer_has_hiz(depth_irb)) {
brw->depthstencil.hiz_offset =
intel_region_get_aligned_offset(depth_mt->region,
depth_irb->draw_x & ~tile_mask_x,
(depth_irb->draw_y & ~tile_mask_y) /
2,
false);
}
}
if (stencil_irb) {
stencil_mt = get_stencil_miptree(stencil_irb);
brw->depthstencil.stencil_mt = stencil_mt;
if (stencil_mt->format == MESA_FORMAT_S_UINT8) {
/* Note: we can't compute the stencil offset using
* intel_region_get_aligned_offset(), because stencil_region claims
* that the region is untiled even though it's W tiled.
*/
brw->depthstencil.stencil_offset =
(stencil_draw_y & ~tile_mask_y) * stencil_mt->region->pitch +
(stencil_draw_x & ~tile_mask_x) * 64;
}
}
}
