bool CalibratorXorgPrint::output_hal(const XYinfo new_axys)
{
const char* sysfs_name = get_sysfs_name();
bool not_sysfs_name = (sysfs_name == NULL);
if (not_sysfs_name)
sysfs_name = "!!Name_Of_TouchScreen!!";
// HAL policy output
printf(" copy the policy below into '/etc/hal/fdi/policy/touchscreen.fdi'\n\
<match key=\"info.product\" contains=\"%s\">\n\
<merge key=\"input.x11_options.minx\" type=\"string\">%d</merge>\n\
<merge key=\"input.x11_options.maxx\" type=\"string\">%d</merge>\n\
<merge key=\"input.x11_options.miny\" type=\"string\">%d</merge>\n\
<merge key=\"input.x11_options.maxy\" type=\"string\">%d</merge>\n"
, sysfs_name, new_axys.x.min, new_axys.x.max, new_axys.y.min, new_axys.y.max);
printf(" <merge key=\"input.x11_options.swapxy\" type=\"string\">%d</merge>\n", new_axys.swap_xy);
printf(" <merge key=\"input.x11_options.invertx\" type=\"string\">%d</merge>\n", new_axys.x.invert);
printf(" <merge key=\"input.x11_options.inverty\" type=\"string\">%d</merge>\n", new_axys.y.invert);
printf("</match>\n");
if (not_sysfs_name)
printf("\nChange '%s' to your device's name in the config above.\n", sysfs_name);
return true;
}
bool CalibratorXorgPrint::output_xorgconfd(const XYinfo new_axys)
{
const char* sysfs_name = get_sysfs_name();
bool not_sysfs_name = (sysfs_name == NULL);
if (not_sysfs_name)
sysfs_name = "!!Name_Of_TouchScreen!!";
// xorg.conf.d snippet
printf(" copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf'\n");
printf("Section \"InputClass\"\n");
printf(" Identifier \"calibration\"\n");
printf(" MatchProduct \"%s\"\n", sysfs_name);
printf(" Option \"MinX\" \"%d\"\n", new_axys.x.min);
printf(" Option \"MaxX\" \"%d\"\n", new_axys.x.max);
printf(" Option \"MinY\" \"%d\"\n", new_axys.y.min);
printf(" Option \"MaxY\" \"%d\"\n", new_axys.y.max);
printf(" Option \"SwapXY\" \"%d\" # unless it was already set to 1\n", new_axys.swap_xy);
printf(" Option \"InvertX\" \"%d\" # unless it was already set\n", new_axys.x.invert);
printf(" Option \"InvertY\" \"%d\" # unless it was already set\n", new_axys.y.invert);
printf("EndSection\n");
if (not_sysfs_name)
printf("\nChange '%s' to your device's name in the config above.\n", sysfs_name);
return true;
}
bool CalibratorXorgPrint::output_xorgconfd(const XYinfo new_axys)
{
const char* sysfs_name = get_sysfs_name();
bool not_sysfs_name = (sysfs_name == NULL);
if (not_sysfs_name)
sysfs_name = "!!Name_Of_TouchScreen!!";
if(output_filename == NULL || not_sysfs_name)
printf(" copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)\n");
else
printf(" writing calibration script to '%s'\n", output_filename);
// xorg.conf.d snippet
char line[MAX_LINE_LEN];
std::string outstr;
outstr += "Section \"InputClass\"\n";
outstr += " Identifier \"calibration\"\n";
sprintf(line, " MatchProduct \"%s\"\n", sysfs_name);
outstr += line;
sprintf(line, " Option \"MinX\" \"%d\"\n", new_axys.x.min);
outstr += line;
sprintf(line, " Option \"MaxX\" \"%d\"\n", new_axys.x.max);
outstr += line;
sprintf(line, " Option \"MinY\" \"%d\"\n", new_axys.y.min);
outstr += line;
sprintf(line, " Option \"MaxY\" \"%d\"\n", new_axys.y.max);
outstr += line;
sprintf(line, " Option \"SwapXY\" \"%d\" # unless it was already set to 1\n", new_axys.swap_xy);
outstr += line;
sprintf(line, " Option \"InvertX\" \"%d\" # unless it was already set\n", new_axys.x.invert);
outstr += line;
sprintf(line, " Option \"InvertY\" \"%d\" # unless it was already set\n", new_axys.y.invert);
outstr += line;
outstr += "EndSection\n";
// console out
printf("%s", outstr.c_str());
if (not_sysfs_name)
printf("\nChange '%s' to your device's name in the config above.\n", sysfs_name);
// file out
else if(output_filename != NULL) {
FILE* fid = fopen(output_filename, "w");
if (fid == NULL) {
fprintf(stderr, "Error: Can't open '%s' for writing. Make sure you have the necessary rights\n", output_filename);
fprintf(stderr, "New calibration data NOT saved\n");
return false;
}
fprintf(fid, "%s", outstr.c_str());
fclose(fid);
}
return true;
}
bool CalibratorXorgPrint::output_hal(const XYinfo new_axys)
{
const char* sysfs_name = get_sysfs_name();
bool not_sysfs_name = (sysfs_name == NULL);
if (not_sysfs_name)
sysfs_name = "!!Name_Of_TouchScreen!!";
if(output_filename == NULL || not_sysfs_name)
printf(" copy the policy below into '/etc/hal/fdi/policy/touchscreen.fdi'\n");
else
printf(" writing HAL calibration data to '%s'\n", output_filename);
// HAL policy output
char line[MAX_LINE_LEN];
std::string outstr;
sprintf(line, "<match key=\"info.product\" contains=\"%s\">\n", sysfs_name);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.minx\" type=\"string\">%d</merge>\n", new_axys.x.min);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.maxx\" type=\"string\">%d</merge>\n", new_axys.x.max);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.miny\" type=\"string\">%d</merge>\n", new_axys.y.min);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.maxy\" type=\"string\">%d</merge>\n", new_axys.y.max);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.swapxy\" type=\"string\">%d</merge>\n", new_axys.swap_xy);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.invertx\" type=\"string\">%d</merge>\n", new_axys.x.invert);
outstr += line;
sprintf(line, " <merge key=\"input.x11_options.inverty\" type=\"string\">%d</merge>\n", new_axys.y.invert);
outstr += line;
outstr += "</match>\n";
// console out
printf("%s", outstr.c_str());
if (not_sysfs_name)
printf("\nChange '%s' to your device's name in the config above.\n", sysfs_name);
// file out
else if(output_filename != NULL) {
FILE* fid = fopen(output_filename, "w");
if (fid == NULL) {
fprintf(stderr, "Error: Can't open '%s' for writing. Make sure you have the necessary rights\n", output_filename);
fprintf(stderr, "New calibration data NOT saved\n");
return false;
}
fprintf(fid, "%s", outstr.c_str());
fclose(fid);
}
return true;
}
