/** Checks for climate object and maps the climate variables to the house object variables. Currently Tout, RHout and solar flux data from TMY files are used. If no climate object is linked, then Tout will be set to 74 degF, RHout is set to 75% and solar flux will be set to zero for all orientations. **/ int house::init_climate() { OBJECT *hdr = OBJECTHDR(this); // link to climate data static FINDLIST *climates = NULL; int not_found = 0; if (climates==NULL && not_found==0) { climates = gl_find_objects(FL_NEW,FT_CLASS,SAME,"climate",FT_END); if (climates==NULL) { not_found = 1; gl_warning("house: no climate data found, using static data"); //default to mock data static double tout=74.0, rhout=0.75, solar[8] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0}; pTout = &tout; pRhout = &rhout; pSolar = &solar[0]; } else if (climates->hit_count>1) { gl_warning("house: %d climates found, using first one defined", climates->hit_count); } } if (climates!=NULL) { if (climates->hit_count==0) { //default to mock data static double tout=74.0, rhout=0.75, solar[8] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0}; pTout = &tout; pRhout = &rhout; pSolar = &solar[0]; } else //climate data was found { // force rank of object w.r.t climate OBJECT *obj = gl_find_next(climates,NULL); if (obj->rank<=hdr->rank) gl_set_dependent(obj,hdr); pTout = (double*)GETADDR(obj,gl_get_property(obj,"temperature")); pRhout = (double*)GETADDR(obj,gl_get_property(obj,"humidity")); pSolar = (double*)GETADDR(obj,gl_get_property(obj,"solar_flux")); } } return 1; }
EXPORT int create_player(OBJECT **obj, OBJECT *parent) { *obj = gl_create_object(player_class); if (*obj!=NULL) { struct player *my = OBJECTDATA(*obj,struct player); last_player = *obj; gl_set_parent(*obj,parent); strcpy(my->file,""); strcpy(my->filetype,"txt"); strcpy(my->mode, "file"); strcpy(my->property,"(undefined)"); my->next.ts = TS_ZERO; strcpy(my->next.value,""); my->loopnum = 0; my->loop = 0; my->status = TS_INIT; my->target = gl_get_property(*obj,my->property,NULL); my->delta_track.ns = 0; my->delta_track.ts = TS_NEVER; my->delta_track.value[0] = '\0'; return 1; } return 0; }
double *transmissioncom::get_double(OBJECT *obj, char *name) { PROPERTY *p = gl_get_property(obj,name); if (p==NULL || p->ptype!=PT_double) return NULL; return (double*)GETADDR(obj,p); }
complex *microturbine::get_complex(OBJECT *obj, char *name) { PROPERTY *p = gl_get_property(obj,name); if (p==NULL || p->ptype!=PT_complex) return NULL; return (complex*)GETADDR(obj,p); }
//Function to extract address of outage flag bool *metrics::get_outage_flag(OBJECT *obj, char *name) { PROPERTY *p = gl_get_property(obj,name); if (p==NULL || p->ptype!=PT_bool) return NULL; return (bool*)GETADDR(obj,p); }
// Initialize a distribution meter, return 1 on success int meter::init(OBJECT *parent) { if(power_market != 0){ price_prop = gl_get_property(power_market, "current_market.clearing_price"); if(price_prop == 0){ GL_THROW("meter::power_market object \'%s\' does not publish \'current_market.clearing_price\'", (power_market->name ? power_market->name : "(anon)")); } } // Count the number of phases...for use with meter_power_consumption if (meter_power_consumption != complex(0,0)) { no_phases = 0; if (has_phase(PHASE_A)) no_phases += 1; if (has_phase(PHASE_B)) no_phases += 1; if (has_phase(PHASE_C)) no_phases += 1; } check_prices(); last_t = dt = 0; return node::init(parent); }
//Retrieve the address of a metric double *metrics::get_metric(OBJECT *obj, char *name) { PROPERTY *p = gl_get_property(obj,name); if (p==NULL || p->ptype!=PT_double) return NULL; return (double*)GETADDR(obj,p); }
bool *inverter::get_bool(OBJECT *obj, char *name) { PROPERTY *p = gl_get_property(obj,name); if (p==NULL || p->ptype!=PT_bool) return NULL; return (bool*)GETADDR(obj,p); }
/** Water heater synchronization determines the time to next synchronization state and the power drawn since last synch **/ TIMESTAMP virtual_battery::sync(TIMESTAMP t0, TIMESTAMP t1) { TIMESTAMP t2 = TS_NEVER; //printf("sync: %f ",capacity); double *pSolarD = (double*)GETADDR(climate_object,gl_get_property(climate_object,"solar_flux")); if(first_time==2 && first_time2==0) { if(ch==1) { //system("pause"); if(capacity >= 100000 ) { // printf("sync 1:%f \n",capacity); // system("pause"); charge=0; } if(capacity < max_capacity *0.2) { // printf("sync 2:%f \n",capacity); // system("pause"); charge=1; } //if(*pSolarD > 0) //{ if(charge==1 ) { //system("pause"); capacity=capacity + (*power)/drilling_systems; // printf("sync 3:%f \n",capacity); // system("pause"); } //} //printf("%f\n\n", capacity); } ch=0; } return TS_NEVER; }
// Initialize a distribution triplex_meter, return 1 on success int triplex_meter::init(OBJECT *parent) { #ifdef SUPPORT_OUTAGES sustained_count=0; //reliability sustained event counter momentary_count=0; //reliability momentary event counter total_count=0; //reliability total event counter s_flag=0; t_flag=0; pre_load=0; #endif if(power_market != 0){ price_prop = gl_get_property(power_market, market_price_name); if(price_prop == 0){ GL_THROW("triplex_meter::power_market object \'%s\' does not publish \'%s\'", (power_market->name ? power_market->name : "(anon)"), (const char*)market_price_name); } } check_prices(); return triplex_node::init(parent); }
// INIT // Initializes the machine // RETURN // -1 - failed // 0 - succeeded // n - succeeded, wait n seconds before calling run int machine::init(OBJECT *parent) { gl_debug("Connecting PLC to %s:%d...", parent->oclass->name, parent->id); PLCDATA item; for (item=_data; item->name!=NULL; item++) { PROPERTY *p = gl_get_property(parent,item->name); if (p==NULL) { gl_error("PCL data item %s is not found in object %s:%d", item->name, parent->oclass->name, parent->id); return -1; } else if (item->type!=p->ptype) { gl_error("PLC data item %s does not match parent's type", item->name); return -1; } else item->addr = (void*)((char*)(parent+1)+(unsigned int64)p->addr); } gl_debug("Initializing %s:%d PLC...", parent->oclass->name, parent->id); return (*_init)(); }
int group_recorder::init(OBJECT *obj){ OBJECT *gr_obj = 0; // check for group if(0 == group_def[0]){ if(strict){ gl_error("group_recorder::init(): no group defined"); /* TROUBLESHOOT group_recorder must define a group in "group_def". */ return 0; } else { gl_warning("group_recorder::init(): no group defined"); tape_status = TS_ERROR; return 1; // nothing more to do } } // check for filename if(0 == filename[0]){ // if no filename, auto-generate based on ID if(strict){ gl_error("group_recorder::init(): no filename defined in strict mode"); return 0; } else { sprintf(filename, "%256s-%256i.csv", oclass->name, obj->id); gl_warning("group_recorder::init(): no filename defined, auto-generating '%s'", filename); /* TROUBLESHOOT group_recorder requires a filename. If none is provided, a filename will be generated using a combination of the classname and the core-assigned ID number. */ } } // check valid write interval write_interval = (int64)(dInterval); if(-1 > write_interval){ gl_error("group_recorder::init(): invalid write_interval of %i, must be -1 or greater", write_interval); /* TROUBLESHOOT The group_recorder interval must be -1, 0, or a positive number of seconds. */ return 0; } // all flush intervals are valid flush_interval = (int64)dFlush_interval; // build group // * invariant? // * non-empty set? items = gl_find_objects(FL_GROUP, group_def); if(0 == items){ if(strict){ gl_error("group_recorder::init(): unable to construct a set with group definition"); /* TROUBLESHOOT An error occured while attempting to build and populate the find list with the specified group definition. */ return 0; } else { gl_warning("group_recorder::init(): unable to construct a set with group definition"); tape_status = TS_ERROR; return 1; // nothing more to do } } if(1 > items->hit_count){ if(strict){ gl_error("group_recorder::init(): the defined group returned an empty set"); /* TROUBLESHOOT Placeholder. */ return 0; } else { gl_warning("group_recorder::init(): the defined group returned an empty set"); tape_status = TS_ERROR; return 1; } } // open file rec_file = fopen(filename, "w"); if(0 == rec_file){ if(strict){ gl_error("group_recorder::init(): unable to open file '%s' for writing", filename); return 0; } else { gl_warning("group_recorder::init(): unable to open file '%s' for writing", filename); /* TROUBLESHOOT If the group_recorder cannot open the specified output file, it will */ tape_status = TS_ERROR; return 1; } } // turn list into objlist, count items obj_count = 0; for(gr_obj = gl_find_next(items, 0); gr_obj != 0; gr_obj = gl_find_next(items, gr_obj) ){ prop_ptr = gl_get_property(gr_obj, property_name); // might make this a 'strict-only' issue in the future if(prop_ptr == NULL){ gl_error("group_recorder::init(): unable to find property '%s' in an object of type '%s'", property_name, gr_obj->oclass->name); /* TROUBLESHOOT An error occured while reading the specified property in one of the objects. */ return 0; } ++obj_count; if(obj_list == 0){ obj_list = new quickobjlist(gr_obj, prop_ptr); } else { obj_list->tack(gr_obj, prop_ptr); } } tape_status = TS_OPEN; if(0 == write_header()){ gl_error("group_recorder::init(): an error occured when writing the file header"); /* TROUBLESHOOT Unexpected IO error. */ tape_status = TS_ERROR; return 0; } return 1; }
/** Checks for climate object and maps the climate variables to the house object variables. Currently Tout, RHout and solar_service flux data from TMY files are used. If no climate object is linked, then Tout will be set to 59 degF, RHout is set to 75% and solar_service flux will be set to zero for all orientations. **/ int solar_service::init_climate() { OBJECT *hdr = OBJECTHDR(this); OBJECT *obj = NULL; // link to climate data FINDLIST *climates = NULL; if (solar_service_model_tilt != PLAYERVAL) { if (weather!=NULL) { if(!gl_object_isa(weather, "climate")){ // strcmp failure gl_error("weather property refers to a(n) \"%s\" object and not a climate object", weather->oclass->name); /* TROUBLESHOOT While attempting to map a climate property, the solar_service array encountered an object that is not a climate object. Please check to make sure a proper climate object is present, and/or specified. If the bug persists, please submit your code and a bug report via the trac website. */ return 0; } obj = weather; } else //No weather specified, search { climates = gl_find_objects(FL_NEW,FT_CLASS,SAME,"climate",FT_END); if (climates==NULL) { //Ensure weather is set to NULL - catch below weather = NULL; } else if (climates->hit_count==0) { //Ensure weather is set to NULL - catch below weather = NULL; } else //climate data must have been found { if (climates->hit_count>1) { gl_warning("solar_servicepanel: %d climates found, using first one defined", climates->hit_count); /* TROUBLESHOOT More than one climate object was found, so only the first one will be used by the solar_service array object */ } gl_verbose("solar_service init: climate data was found!"); // force rank of object w.r.t climate obj = gl_find_next(climates,NULL); weather = obj; } } //Make sure it actually found one if (weather == NULL) { //Replicate above warning gl_warning("solar_servicepanel: no climate data found, using static data"); /* TROUBLESHOOT No climate object was found and player mode was not enabled, so the solar_service array object is utilizing default values for all relevant weather variables. */ //default to mock data static double tout=59.0, rhout=0.75, solar_service=92.902, wsout=0.0, albdefault=0.2; pTout = &tout; pRhout = &rhout; psolar_serviceD = &solar_service; //Default all solar_service values to normal "optimal" 1000 W/m^2 psolar_serviceH = &solar_service; psolar_serviceG = &solar_service; pAlbedo = &albdefault; pWindSpeed = &wsout; if (orientation_type==FIXED_AXIS) { GL_THROW("FIXED_AXIS requires a climate file!"); /* TROUBLESHOOT The FIXED_AXIS model for the PV array requires climate data to properly function. Please specify such data, or consider using a different tilt model. */ } } else if (!gl_object_isa(weather,"climate")) //Semi redundant for "weather" { GL_THROW("weather object is not a climate object!"); /* TROUBLESHOOT The object specified for the weather property is not a climate object and will not work with the solar_service object. Please specify a valid climate object, or let the solar_service object automatically connect. */ } else //Must be a proper object { if((obj->flags & OF_INIT) != OF_INIT){ char objname[256]; gl_verbose("solar_service::init(): deferring initialization on %s", gl_name(obj, objname, 255)); return 2; // defer } if (obj->rank<=hdr->rank) gl_set_dependent(obj,hdr); pTout = (double*)GETADDR(obj,gl_get_property(obj,"temperature")); // pRhout = (double*)GETADDR(obj,gl_get_property(obj,"humidity")); <---- Not used anywhere yet psolar_serviceD = (double*)GETADDR(obj,gl_get_property(obj,"solar_service_direct")); psolar_serviceH = (double*)GETADDR(obj,gl_get_property(obj,"solar_service_diffuse")); psolar_serviceG = (double*)GETADDR(obj,gl_get_property(obj,"solar_service_global")); pAlbedo = (double*)GETADDR(obj,gl_get_property(obj,"ground_reflectivity")); pWindSpeed = (double*)GETADDR(obj,gl_get_property(obj,"wind_speed")); //Should probably check these if (pTout==NULL) { GL_THROW("Failed to map outside temperature"); /* TROUBLESHOOT The solar_service PV array failed to map the outside air temperature. Ensure this is properly specified in your climate data and try again. */ } //No need to error check - doesn't exist in any formulations yet //if (pRhout==NULL) //{ // GL_THROW("Failed to map outside relative humidity"); // /* TROUBLESHOOT // The solar_service PV array failed to map the outside relative humidity. Ensure this is // properly specified in your climate data and try again. // */ //} if (psolar_serviceD==NULL) { GL_THROW("Failed to map direct normal solar_service radiation"); /* TROUBLESHOOT The solar_service PV array failed to map the solar_service direct normal radiation. Ensure this is properly specified in your climate data and try again. */ } if (psolar_serviceH==NULL) { GL_THROW("Failed to map diffuse horizontal solar_service radiation"); /* TROUBLESHOOT The solar_service PV array failed to map the solar_service diffuse horizontal radiation. Ensure this is properly specified in your climate data and try again. */ } if (psolar_serviceG==NULL) { GL_THROW("Failed to map global horizontal solar_service radiation"); /* TROUBLESHOOT The solar_service PV array failed to map the solar_service global horizontal radiation. Ensure this is properly specified in your climate data and try again. */ } if (pAlbedo==NULL) { GL_THROW("Failed to map albedo/ground reflectance"); /* TROUBLESHOOT The solar_service PV array failed to map the ground reflectance. Ensure this is properly specified in your climate data and try again. */ } if (pWindSpeed==NULL) { GL_THROW("Failed to map wind speed"); /* TROUBLESHOOT The solar_service PV array failed to map the wind speed. Ensure this is properly specified in your climate data and try again. */ } //If climate data was found, check other related variables if (fix_angle_lat==true) { if (obj->latitude < 0) //Southern hemisphere { //Get the latitude from the climate file tilt_angle = -obj->latitude; } else //Northern { //Get the latitude from the climate file tilt_angle = obj->latitude; } } //Check the tilt angle for absurdity if (tilt_angle < 0) { GL_THROW("Invalid tilt_angle - tilt must be between 0 and 90 degrees"); /* TROUBLESHOOT A negative tilt angle was specified. This implies the array is under the ground and will not receive any meaningful solar_service irradiation. Please correct the tilt angle and try again. */ } else if (tilt_angle > 90.0) { GL_THROW("Invalid tilt angle - values above 90 degrees are unsupported!"); /* TROUBLESHOOT An tilt angle over 90 degrees (straight up and down) was specified. Beyond this angle, the tilt algorithm does not function properly. Please specific the tilt angle between 0 and 90 degrees and try again. */ } //Check the solar_service method if (orientation_type == FIXED_AXIS) { //See which function we want to use if (solar_service_model_tilt==LIUJORDAN) { //Map up the "classic" function calc_solar_service_radiation = (FUNCTIONADDR)(gl_get_function(obj,"calculate_solar_service_radiation_shading_degrees")); } else if (solar_service_model_tilt==SOLPOS) //Use the solpos/Perez tilt model { //Map up the "classic" function calc_solar_service_radiation = (FUNCTIONADDR)(gl_get_function(obj,"calc_solpos_radiation_shading_degrees")); } //Make sure it was found if (calc_solar_service_radiation == NULL) { GL_THROW("Unable to map solar_service radiation function on %s in %s",obj->name,hdr->name); /* TROUBLESHOOT While attempting to initialize the photovoltaic array mapping of the solar_service radiation function. Please try again. If the bug persists, please submit your GLM and a bug report via the trac website. */ } //Check azimuth for absurdity as well if ((orientation_azimuth<0.0) || (orientation_azimuth > 360.0)) { GL_THROW("orientation_azimuth must be a value representing a valid cardinal direction of 0 to 360 degrees!"); /* TROUBLESHOOT The orientation_azimuth property is expected values on the cardinal points degree system. For this convention, 0 or 360 is north, 90 is east, 180 is south, and 270 is west. Please specify a direction within the 0 to 360 degree bound and try again. */ } //Map up our azimuth now too, if needed - Liu & Jordan model assumes 0 = equator facing if (solar_service_model_tilt == LIUJORDAN) { if (obj->latitude>0.0) //North - "south" is equatorial facing { orientation_azimuth_corrected = 180.0 - orientation_azimuth; } else if (obj->latitude<0.0) //South - "north" is equatorial facing { gl_warning("solar_service:%s - Default solar_service position model is not recommended for southern hemisphere!",hdr->name); /* TROUBLESHOOT The Liu-Jordan (default) solar_service position and tilt model was built around the northern hemisphere. As such, operating in the southern hemisphere does not provide completely accurate results. They are close, but tilted surfaces are not properly accounted for. It is recommended that the solar_service_TILT_MODEL SOLPOS be used for southern hemisphere operations. */ if ((orientation_azimuth >= 0.0) && (orientation_azimuth <= 180.0)) { orientation_azimuth_corrected = orientation_azimuth; //East positive } else if (orientation_azimuth == 360.0) //Special case for those who like 360 as North { orientation_azimuth_corrected = 0.0; } else //Must be west { orientation_azimuth_corrected = orientation_azimuth - 360.0; } } else //Equator - erm.... { GL_THROW("Exact equator location of array detected - unknown how to handle orientation"); /* TROUBLESHOOT The solar_service orientation algorithm implemented inside GridLAB-D does not understand how to orient itself for an array exactly on the equator. Shift it north or south a little bit to get valid results. */ } } else //Right now only SOLPOS, which is "correct" - if another is implemented, may need another case orientation_azimuth_corrected = orientation_azimuth; } //Defaulted else for now - don't do anything }//End valid weather - mapping check } else //Player mode, just drop a message { gl_warning("solar_service object:%s is in player mode - be sure to specify relevant values",hdr->name); /* TROUBLESHOOT The solar_service array object is in player mode. It will not take values from climate files or objects. Be sure to specify the Insolation, ambient_temperature, and wind_speed values as necessary. It also will not incorporate any tilt functionality, since the Insolation value is expected to already include this adjustment. */ } return 1; }
int windturb_dg::init(OBJECT *parent) { OBJECT *obj = OBJECTHDR(this); double ZB, SB, EB; complex tst, tst2, tst3, tst4; switch (Turbine_Model) { case GENERIC_IND_LARGE: case GENERIC_SYNCH_LARGE: //Creates generic 1.5 MW wind turbine. blade_diam = 82.5; turbine_height = 90; q = 3; //number of gearbox stages Rated_VA = 1635000; Max_P = 1500000; Max_Q = 650000; Rated_V = 600; pf = 0.95; CP_Data = GENERAL_LARGE; cut_in_ws = 4; //lowest wind speed cut_out_ws = 25; //highest wind speed Cp_max = 0.302; //rotor specifications for power curve ws_maxcp = 7; Cp_rated = Cp_max-.05; ws_rated = 12.5; if (Turbine_Model == GENERIC_IND_LARGE) { Gen_type = INDUCTION; Rst = 0.12; Xst = 0.17; Rr = 0.12; Xr = 0.15; Rc = 999999; Xm = 9.0; } else if (Turbine_Model == GENERIC_SYNCH_LARGE) { Gen_type = SYNCHRONOUS; Rs = 0.05; Xs = 0.200; Rg = 0.000; Xg = 0.000; } break; case GENERIC_IND_MID: case GENERIC_SYNCH_MID: //Creates generic 100kW wind turbine, northwind 100 blade_diam = 23.2; //in m turbine_height = 30; //in m q = 0; //number of gearbox stages, no gear box Rated_VA = 156604; Max_P = 150000; Max_Q = 45000; Rated_V = 480; pf = 0.9; ///lag and lead of 0.9 CP_Data = GENERAL_MID; cut_in_ws = 3.5; //lowest wind speed in m/s cut_out_ws = 25; //highest wind speed in m/s Cp_max = 0.302; //rotor specifications for power curve ws_maxcp = 7; Cp_rated = Cp_max-.05; ws_rated = 14.5; // in m/s if (Turbine_Model == GENERIC_IND_MID) { // need to check the machine parameters Gen_type = INDUCTION; Rst = 0.12; Xst = 0.17; Rr = 0.12; Xr = 0.15; Rc = 999999; Xm = 9.0; } else if (Turbine_Model == GENERIC_SYNCH_MID) { Gen_type = SYNCHRONOUS; Rs = 0.05; Xs = 0.200; Rg = 0.000; Xg = 0.000; } break; case GENERIC_IND_SMALL: case GENERIC_SYNCH_SMALL: //Creates generic 5 kW wind turbine, Fortis Montana 5 kW wind turbine blade_diam = 5; // in m turbine_height = 16; //in m q = 0; //number of gearbox stages, no gear box Rated_VA = 6315; // calculate from P & Q Max_P = 5800; Max_Q = 2500; Rated_V = 600; pf = 0.95; CP_Data = GENERAL_SMALL; cut_in_ws = 2.5; //lowest wind speed cut_out_ws = 25; //highest wind speed Cp_max = 0.302; //rotor specifications for power curve ws_maxcp = 7; // | Cp_rated = Cp_max-.05; // | ws_rated = 17; // | if (Turbine_Model == GENERIC_IND_SMALL) { Gen_type = INDUCTION; Rst = 0.12; Xst = 0.17; Rr = 0.12; Xr = 0.15; Rc = 999999; Xm = 9.0; } else if (Turbine_Model == GENERIC_SYNCH_SMALL) { Gen_type = SYNCHRONOUS; Rs = 0.05; Xs = 0.200; Rg = 0.000; Xg = 0.000; } break; case VESTAS_V82: //Include manufacturer's data - cases can be added to call other wind turbines turbine_height = 78; blade_diam = 82; Rated_VA = 1808000; Rated_V = 600; Max_P = 1650000; Max_Q = 740000; pf = 0.91; //Can range between 0.65-1.00 depending on controllers and Pout. CP_Data = MANUF_TABLE; cut_in_ws = 3.5; cut_out_ws = 20; q = 2; Gen_type = SYNCHRONOUS; //V82 actually uses a DFIG, but will use synch representation for now Rs = 0.025; //Estimated values for synch representation. Xs = 0.200; Rg = 0.000; Xg = 0.000; break; case GE_25MW: turbine_height = 100; blade_diam = 100; Rated_VA = 2727000; Rated_V = 690; Max_P = 2500000; Max_Q = 1090000; pf = 0.95; //ranges between -0.9 -> 0.9; q = 3; CP_Data = GENERAL_LARGE; cut_in_ws = 3.5; cut_out_ws = 25; Cp_max = 0.28; Cp_rated = 0.275; ws_maxcp = 8.2; ws_rated = 12.5; Gen_type = SYNCHRONOUS; Rs = 0.035; Xs = 0.200; Rg = 0.000; Xg = 0.000; break; case BERGEY_10kW: turbine_height = 24; blade_diam = 7; Rated_VA = 10000; Rated_V = 360; Max_P = 15000; Max_Q = 4000; pf = 0.95; //ranges between -0.9 -> 0.9; q = 0; CP_Data = GENERAL_SMALL; cut_in_ws = 2; cut_out_ws = 20; Cp_max = 0.28; Cp_rated = 0.275; ws_maxcp = 8.2; ws_rated = 12.5; Gen_type = SYNCHRONOUS; Rs = 0.05; Xs = 0.200; Rg = 0.000; Xg = 0.000; break; case USER_DEFINED: CP_Data = USER_SPECIFY; Gen_type = USER_TYPE; Rs = 0.2; Xs = 0.2; Rg = 0.1; Xg = 0; if (turbine_height <=0) GL_THROW ("turbine height cannot have a negative or zero value."); /* TROUBLESHOOT Turbine height must be specified as a value greater than or equal to zero. */ if (blade_diam <=0) GL_THROW ("blade diameter cannot have a negative or zero value."); /* TROUBLESHOOT Blade diameter must be specified as a value greater than or equal to zero. */ if (cut_in_ws <=0) GL_THROW ("cut in wind speed cannot have a negative or zero value."); /* TROUBLESHOOT Cut in wind speed must be specified as a value greater than or equal to zero. */ if (cut_out_ws <=0) GL_THROW ("cut out wind speed cannot have a negative or zero value."); /* TROUBLESHOOT Cut out wind speed must be specified as a value greater than or equal to zero. */ if (ws_rated <=0) GL_THROW ("rated wind speed cannot have a negative or zero value."); /* TROUBLESHOOT Rated wind speed must be specified as a value greater than or equal to zero. */ if (ws_maxcp <=0) GL_THROW ("max cp cannot have a negative or zero value."); /* TROUBLESHOOT Maximum coefficient of performance must be specified as a value greater than or equal to zero. */ break; default: GL_THROW("Unknown turbine model was specified"); /* TROUBLESHOOT An unknown wind turbine model was selected. Please select a Turbine_Model from the available list. */ } // construct circuit variable map to meter -- copied from 'House' module struct { complex **var; char *varname; } map[] = { // local object name, meter object name {&pCircuit_V, "voltage_A"}, // assumes 2 and 3 follow immediately in memory {&pLine_I, "current_A"}, // assumes 2 and 3(N) follow immediately in memory /// @todo use triplex property mapping instead of assuming memory order for meter variables (residential, low priority) (ticket #139) }; static complex default_line123_voltage[3], default_line1_current[3]; int i; //Map phases set *phaseInfo; PROPERTY *tempProp; tempProp = gl_get_property(parent,"phases"); if ((tempProp==NULL || tempProp->ptype!=PT_set)) { GL_THROW("Unable to map phases property - ensure the parent is a powerflow:meter"); /* TROUBLESHOOT While attempting to map the phases property from the parent object, an error was encountered. Please check and make sure your parent object is a meter inside the powerflow module and try again. If the error persists, please submit your code and a bug report via the Trac website. */ } else phaseInfo = (set*)GETADDR(parent,tempProp); int temp_phases=0; // Currently only supports 3-phase connection, so check number of phases of parent if ((*phaseInfo & PHASE_A) == PHASE_A) temp_phases += 1; if ((*phaseInfo & PHASE_B) == PHASE_B) temp_phases += 1; if ((*phaseInfo & PHASE_C) == PHASE_C) temp_phases += 1; if (temp_phases < 3) GL_THROW("The wind turbine model currently only supports a 3-phase connection, please check meter connection"); /* TROUBLESHOOT Currently the wind turbine model only supports 3-phase connnections. Please attach to 3-phase meter. */ // find parent meter, if not defined, use a default meter (using static variable 'default_meter') if (parent!=NULL) { if((parent->flags & OF_INIT) != OF_INIT){ char objname[256]; gl_verbose("windturb_dg::init(): deferring initialization on %s", gl_name(parent, objname, 255)); return 2; // defer } if (gl_object_isa(parent,"meter","powerflow")) //Attach to meter { /* NR_mode = get_bool(parent,"NR_mode"); //Check NR_mode, just to be consistent if (NR_mode == NULL) { GL_THROW("Wind turbine failed to map NR_mode property"); */ /* TROUBLESHOOT While attempting to map up the NR_mode property, an error was encountered. Please try again. If the error persists, please submit your code and a bug report via the trac website. */ /* } */ //Map the voltages double *parNominalVoltage; tempProp = gl_get_property(parent,"nominal_voltage"); if ((tempProp==NULL || tempProp->ptype!=PT_double)) { GL_THROW("Unable to map nominal_voltage property - ensure the parent is a powerflow:meter"); /* TROUBLESHOOT While attempting to map the nominal_voltage property from the parent object, an error was encountered. Please check and make sure your parent object is a meter inside the powerflow module and try again. If the error persists, please submit your code and a bug report via the Trac website. */ } else parNominalVoltage = (double*)GETADDR(parent,tempProp); // check nominal voltage against rated voltage if ( fabs(1 - (*parNominalVoltage * sqrt(3.0) / Rated_V) ) > 0.1 ) gl_warning("windturb_dg (id:%d, name:%s): Rated generator voltage (LL: %.1f) and nominal voltage (LL: %.1f) of meter parent are different by greater than 10 percent. Odd behavior may occur.",obj->id,obj->name,Rated_V,*parNominalVoltage * sqrt(3.0)); /* TROUBLESHOOT Currently, the model allows you to attach the turbine to a voltage that is quite different than the rated terminal voltage of the generator. However, this may cause odd behavior, as the solved powerflow voltage is used to calculate the generator induced voltages and conversion from mechanical power. It is recommended that the nominal voltages of the parent meter be within ~10% of the rated voltage. */ // attach meter variables to each circuit for (i=0; i<sizeof(map)/sizeof(map[0]); i++) { *(map[i].var) = get_complex(parent,map[i].varname); if (*(map[i].var) == NULL) { GL_THROW("Unable to map variable %s",map[i].varname); /* TROUBLESHOOT The variable name was not found when mapping it */ } } } else if (gl_object_isa(parent,"triplex_meter","powerflow")) { GL_THROW("The wind turbine model does currently support direct connection to single phase or triplex meters. Connect through a rectifier-inverter combination."); /* TROUBLESHOOT This model does not currently support connection to a triplex system. Please connect to a 3-phase meter. */ //Map voltage pCircuit_V = get_complex(parent,"voltage_1"); //Make sure it worked if (pCircuit_V == NULL) GL_THROW("Unable to map triplex_meter voltage"); //Map current pLine_I = get_complex(parent,"current_1"); //Make sure it worked if (pLine_I == NULL) GL_THROW("Unable to map triplex_meter current"); //NR_mode = get_bool(parent,"NR_mode"); } else if (gl_object_isa(parent,"rectifier","generators")) { //Map the voltages double *parNominalVoltage; tempProp = gl_get_property(parent,"V_Rated"); if ((tempProp==NULL || tempProp->ptype!=PT_double)) { GL_THROW("Unable to map V_Rated property - ensure the parent is a powerflow:meter"); /* TROUBLESHOOT While attempting to map the nominal_voltage property from the parent object, an error was encountered. Please check and make sure your parent object is a meter inside the powerflow module and try again. If the error persists, please submit your code and a bug report via the Trac website. */ } else parNominalVoltage = (double*)GETADDR(parent,tempProp); // check nominal voltage against rated voltage if ( fabs(1 - (*parNominalVoltage / Rated_V) ) > 0.1 ) gl_warning("windturb_dg (id:%d, name:%s): Rated generator voltage (LL: %.1f) and nominal voltage (LL: %.1f) of meter parent are different by greater than 10 percent. Odd behavior may occur.",obj->id,obj->name,Rated_V,*parNominalVoltage * sqrt(3.0)); /* TROUBLESHOOT Currently, the model allows you to attach the turbine to a voltage that is quite different than the rated terminal voltage of the generator. However, this may cause odd behavior, as the solved powerflow voltage is used to calculate the generator induced voltages and conversion from mechanical power. It is recommended that the nominal voltages of the parent meter be within ~10% of the rated voltage. */ // attach meter variables to each circuit for (i=0; i<sizeof(map)/sizeof(map[0]); i++) { if ((*(map[i].var) = get_complex(parent,map[i].varname))==NULL) { GL_THROW("%s (%s:%d) does not implement rectifier variable %s for %s (windturb_dg:%d)", /* TROUBLESHOOT The rectifier requires that the inverter contains certain published properties in order to properly connect. If you encounter this error, please report it to the developers, along with the version of GridLAB-D that raised this error. */ parent->name?parent->name:"unnamed object", parent->oclass->name, parent->id, map[i].varname, obj->name?obj->name:"unnamed", obj->id); } } } else { GL_THROW("windturb_dg (id:%d): Invalid parent object",obj->id); /* TROUBLESHOOT The wind turbine object must be attached a 3-phase meter object. Please check parent of object. */ } } else { gl_warning("windturb_dg:%d %s", obj->id, parent==NULL?"has no parent meter defined":"parent is not a meter"); // attach meter variables to each circuit in the default_meter *(map[0].var) = &default_line123_voltage[0]; *(map[1].var) = &default_line1_current[0]; // provide initial values for voltages default_line123_voltage[0] = complex(Rated_V/sqrt(3.0),0); default_line123_voltage[1] = complex(Rated_V/sqrt(3.0)*cos(2*PI/3),Rated_V/sqrt(3.0)*sin(2*PI/3)); default_line123_voltage[2] = complex(Rated_V/sqrt(3.0)*cos(-2*PI/3),Rated_V/sqrt(3.0)*sin(-2*PI/3)); NR_mode = &default_NR_mode; } if (Gen_status==OFFLINE) { gl_warning("init_windturb_dg (id:%d,name:%s): Generator is out of service!", obj->id,obj->name); } if (Gen_type == SYNCHRONOUS || Gen_type == INDUCTION) { if (Gen_mode == CONSTANTE) { gl_warning("init_windturb_dg (id:%d,name:%s): Synchronous and induction generators in constant voltage mode has not been fully tested and my not work properly.", obj->id,obj->name); } } if (Rated_VA!=0.0) SB = Rated_VA/3; if (Rated_V!=0.0) EB = Rated_V/sqrt(3.0); if (SB!=0.0) ZB = EB*EB/SB; else GL_THROW("Generator power capacity not specified!"); /* TROUBLESHOOT Rated_VA of generator must be specified so that per unit values can be calculated */ if (Gen_type == INDUCTION) { complex Zrotor(Rr,Xr); complex Zmag = complex(Rc*Xm*Xm/(Rc*Rc + Xm*Xm),Rc*Rc*Xm/(Rc*Rc + Xm*Xm)); complex Zstator(Rst,Xst); //Induction machine two-port matrix. IndTPMat[0][0] = (Zmag + Zstator)/Zmag; IndTPMat[0][1] = Zrotor + Zstator + Zrotor*Zstator/Zmag; IndTPMat[1][0] = complex(1,0) / Zmag; IndTPMat[1][1] = (Zmag + Zrotor) / Zmag; } else if (Gen_type == SYNCHRONOUS) { double Real_Rs = Rs * ZB; double Real_Xs = Xs * ZB; double Real_Rg = Rg * ZB; double Real_Xg = Xg * ZB; tst = complex(Real_Rg,Real_Xg); tst2 = complex(Real_Rs,Real_Xs); AMx[0][0] = tst2 + tst; //Impedance matrix AMx[1][1] = tst2 + tst; AMx[2][2] = tst2 + tst; AMx[0][1] = AMx[0][2] = AMx[1][0] = AMx[1][2] = AMx[2][0] = AMx[2][1] = tst; tst3 = (complex(1,0) + complex(2,0)*tst/tst2)/(tst2 + complex(3,0)*tst); tst4 = (-tst/tst2)/(tst2 + tst); invAMx[0][0] = tst3; //Admittance matrix (inverse of Impedance matrix) invAMx[1][1] = tst3; invAMx[2][2] = tst3; invAMx[0][1] = AMx[0][2] = AMx[1][0] = AMx[1][2] = AMx[2][0] = AMx[2][1] = tst4; } else GL_THROW("Unknown generator type specified"); /* TROUBLESHOOT Shouldn't have been able to specify an unknown generator type. Please report this error to GridLAB-D support. */ init_climate(); return 1; }
// Initialize a distribution meter, return 1 on success int meter::init(OBJECT *parent) { char temp_buff[128]; if(power_market != 0){ price_prop = gl_get_property(power_market, "current_market.clearing_price"); if(price_prop == 0){ GL_THROW("meter::power_market object \'%s\' does not publish \'current_market.clearing_price\'", (power_market->name ? power_market->name : "(anon)")); } } // Count the number of phases...for use with meter_power_consumption if (meter_power_consumption != complex(0,0)) { no_phases = 0; if (has_phase(PHASE_A)) no_phases += 1; if (has_phase(PHASE_B)) no_phases += 1; if (has_phase(PHASE_C)) no_phases += 1; } check_prices(); last_t = dt = 0; //Update tracking flag //Get server mode variable gl_global_getvar("multirun_mode",temp_buff,sizeof(temp_buff)); //See if we're not in standalone if (strcmp(temp_buff,"STANDALONE")) //strcmp returns a 0 if they are the same { if ((solver_method == SM_NR) && (bustype == SWING)) { meter_NR_servered = true; //Set this flag for later use //Allocate the storage vector prev_voltage_value = (complex *)gl_malloc(3*sizeof(complex)); //Check it if (prev_voltage_value==NULL) { GL_THROW("Failure to allocate memory for voltage tracking array"); /* TROUBLESHOOT While attempting to allocate memory for the voltage tracking array used by the master/slave functionality, an error occurred. Please try again. If the error persists, please submit your code and a bug report via the trac website. */ } //Populate it with zeros for now, just cause - init sets voltages in node prev_voltage_value[0] = complex(0.0,0.0); prev_voltage_value[1] = complex(0.0,0.0); prev_voltage_value[2] = complex(0.0,0.0); } } return node::init(parent); }
EXPORT TIMESTAMP sync_player(OBJECT *obj, TIMESTAMP t0, PASSCONFIG pass) { struct player *my = OBJECTDATA(obj,struct player); TIMESTAMP t1 = (TS_OPEN == my->status) ? my->next.ts : TS_NEVER; TIMESTAMP temp_t; if (my->status==TS_INIT){ /* get local target if remote is not used and "value" is defined by the user at runtime */ if (my->target==NULL && obj->parent == NULL) my->target = gl_get_property(obj,"value",NULL); if(player_open(obj) == 0) { gl_error("sync_player: Unable to open player file '%s' for object '%s'", my->file, obj->name?obj->name:"(anon)"); } else { t1 = player_read(obj); } } while (my->status==TS_OPEN && t1<=t0 && my->next.ns==0 ) /* only use this method when not operating in subsecond mode */ { /* post this value */ if (my->target==NULL) my->target = gl_get_property(obj->parent,my->property,NULL); if (my->target==NULL){ gl_error("sync_player: Unable to find property \"%s\" in object %s", my->property, obj->name?obj->name:"(anon)"); my->status = TS_ERROR; } if (my->target!=NULL) { OBJECT *target = obj->parent ? obj->parent : obj; /* target myself if no parent */ gl_set_value(target,GETADDR(target,my->target),my->next.value,my->target); /* pointer => int64 */ } /* Copy the current value into our "tracking" variable */ my->delta_track.ns = my->next.ns; my->delta_track.ts = my->next.ts; memcpy(my->delta_track.value,my->next.value,sizeof(char256)); t1 = player_read(obj); } /* Apply an intermediate value, if necessary - mainly for "DELTA players in non-delta situations" */ if ((my->target!=NULL) && (my->delta_track.ts<t0) && (my->delta_track.ns!=0)) { OBJECT *target = obj->parent ? obj->parent : obj; /* target myself if no parent */ gl_set_value(target,GETADDR(target,my->target),my->delta_track.value,my->target); /* pointer => int64 */ } /* Delta-mode catch - if we're not explicitly in delta mode and a nano-second values pops up, try to advance past it */ if (((obj->flags & OF_DELTAMODE)!=OF_DELTAMODE) && (my->next.ns != 0) && (my->status==TS_OPEN)) { /* Initial value for next time */ temp_t = t1; /* Copied verbatim from above - just in case it still needs to be done - if a first timestep is a deltamode timestep */ if (my->target==NULL) my->target = gl_get_property(obj->parent,my->property,NULL); if (my->target==NULL){ gl_error("sync_player: Unable to find property \"%s\" in object %s", my->property, obj->name?obj->name:"(anon)"); my->status = TS_ERROR; } /* Advance to a zero */ while ((my->next.ns != 0) && (my->next.ts<=t0)) { /* Post the value as we go, so the "final" is correct */ /* Apply the "current value", if it is relevant (player_next_value contains the previous, so this will override it) */ if ((my->target!=NULL) && (my->next.ts<t0)) { OBJECT *target = obj->parent ? obj->parent : obj; /* target myself if no parent */ gl_set_value(target,GETADDR(target,my->target),my->next.value,my->target); /* pointer => int64 */ } /* Copy the value into the tracking variable */ my->delta_track.ns = my->next.ns; my->delta_track.ts = my->next.ts; memcpy(my->delta_track.value,my->next.value,sizeof(char256)); /* Perform the update */ temp_t = player_read(obj); } /* Apply the update */ t1 = temp_t; } else if (((obj->flags & OF_DELTAMODE)==OF_DELTAMODE) && (delta_mode_needed<t0)) /* Code to catch when gets stuck in deltamode (exits early) */ { if (my->next.ts<t0) { /* Advance to a value bigger than t0 */ while ((my->next.ns != 0) && (my->next.ts<=t0)) { /* Post the value as we go, so the "final" is correct */ /* Apply the "current value", if it is relevant (player_next_value contains the previous, so this will override it) */ if ((my->target!=NULL) && (my->next.ts<t0)) { OBJECT *target = obj->parent ? obj->parent : obj; /* target myself if no parent */ gl_set_value(target,GETADDR(target,my->target),my->next.value,my->target); /* pointer => int64 */ } /* Copy the value into the tracking variable */ my->delta_track.ns = my->next.ns; my->delta_track.ts = my->next.ts; memcpy(my->delta_track.value,my->next.value,sizeof(char256)); /* Perform the update */ temp_t = player_read(obj); } /* Do the adjustment of return */ if (t1 < t0) /* Sometimes gets stuck */ { /* Force it forward */ t1 = temp_t; } else /* Equal or greater than next time */ { if ((temp_t<t1) && (temp_t>t0)) t1 = temp_t; } } else if (my->next.ts == t0) { /* Roll it once */ /* Copy the value into the tracking variable */ my->delta_track.ns = my->next.ns; my->delta_track.ts = my->next.ts; memcpy(my->delta_track.value,my->next.value,sizeof(char256)); /* Perform the update */ temp_t = player_read(obj); } } /* See if we need to push a sooner update (DELTA round)*/ if ((my->delta_track.ts!=TS_NEVER) && (my->delta_track.ns != 0)) { /* Round the timestep up */ temp_t = my->delta_track.ts+1; /* Make sure it is still valid - don't want to get stuck iterating */ if ((temp_t<t1) && (temp_t>t0)) t1 = temp_t; } /* Catch for next delta instances that may occur -- if doesn't pass a reiteration, gets missed when nothing driving*/ if ((obj->flags & OF_DELTAMODE) == OF_DELTAMODE) { if ((t1>t0) && (my->next.ts==t0) && (my->next.ns != 0)) { /* Return us here, deltamode should have been flagged */ t1 = t0; } /* Check for a final stoppping point -- if player value goes ns beyond current stop time, it will get stuck and iterate */ if ((my->next.ts == gl_globalstoptime) && (my->next.ns != 0) && (t1 == gl_globalstoptime)) { /* Push it one second forward, just so GLD thinks it's done and can get out */ t1 = t1 + 1; } } obj->clock = t0; return t1; }
int load_tracker::init(OBJECT *parent) { // Make sure we have a target object if (target==NULL) { GL_THROW("Target object not set"); /* TROUBLESHOOT Please specify the name of the target object to be monitored. */ } // Make sure we have a target property PROPERTY* target_property = gl_get_property(target,target_prop.get_string()); if (target_property==NULL) { GL_THROW("Unable to find property \"%s\" in object %s", target_prop.get_string(), target->name); /* TROUBLESHOOT Please specify an existing property of the target object to be monitored. */ } // Make sure it is a supported type switch (target_property->ptype) { case PT_double: case PT_complex: case PT_int16: case PT_int32: case PT_int64: break; default: GL_THROW("Unsupported property type. Supported types are complex, double and integer"); /* TROUBLESHOOT Please specify a property whose type is either a double, complex, int16, int32, or an int64. */ } type = target_property->ptype; // Get a pointer to the target property value switch (type) { case PT_double: pointer.d = gl_get_double_by_name(target, target_prop.get_string()); break; case PT_complex: pointer.c = gl_get_complex_by_name(target, target_prop.get_string()); break; case PT_int16: pointer.i16 = gl_get_int16_by_name(target, target_prop.get_string()); break; case PT_int32: pointer.i32 = gl_get_int32_by_name(target, target_prop.get_string()); break; case PT_int64: pointer.i64 = gl_get_int64_by_name(target, target_prop.get_string()); break; } // The VALUEPOINTER is a union of pointers so we only need to check one of them.... if (pointer.d == NULL) { GL_THROW("Unable to bind to property \"%s\" in object %s", target_prop.get_string(), target->name); /* TROUBLESHOOT The property given does not exist for the given property object. Please specify an existing property of the target object. */ } // Make sure we have a full_scale value if (full_scale == 0.0) { GL_THROW("The full_scale property must be non-zero"); /* TROUBLESHOOT Please specify full_scale as a non-zero value. */ } // Check deadbank is OK if (deadband < 1.0 || deadband > 50.0) { GL_THROW("Deadband must be in the range 1% to 50%"); /* TROUBLESHOOT Please specify deadband as a value between 1 and 50. */ } // Check damping is OK if (damping < 0.0) { GL_THROW("Damping must greater than or equal to 0.0"); /* TROUBLESHOOT Please specify damping as a value of 0 or greater. */ } // Set the default output value based on feed-forward control output = setpoint / full_scale; return 1; }
int pqload::init(OBJECT *parent){ int rv = 0; int w_rv = 0; // init_weather from house_e.cpp:init_weather static FINDLIST *climates = NULL; OBJECT *hdr = OBJECTHDR(this); int not_found = 0; if (climates==NULL && not_found==0) { climates = gl_find_objects(FL_NEW,FT_CLASS,SAME,"climate",FT_END); if (climates==NULL) { not_found = 1; gl_warning("pqload: no climate data found"); } else if (climates->hit_count>1) { gl_warning("pqload: %d climates found, using first one defined", climates->hit_count); } } if (climates!=NULL) { if (climates->hit_count==0) { //default to mock data } else //climate data was found { // force rank of object w.r.t climate OBJECT *obj = gl_find_next(climates,NULL); if(weather == NULL){ weather = NULL; } else { if (obj->rank<=hdr->rank) gl_set_dependent(obj,hdr); weather = obj; } } } // old check if(weather != NULL){ temperature = gl_get_property(weather, "temperature"); if(temperature == NULL){ gl_error("Unable to find temperature property in weather object!"); ++w_rv; } humidity = gl_get_property(weather, "humidity"); if(humidity == NULL){ gl_error("Unable to find humidity property in weather object!"); ++w_rv; } solar = gl_get_property(weather, "solar_flux"); if(solar == NULL){ gl_error("Unable to find solar_flux property in weather object!"); ++w_rv; } wind = gl_get_property(weather, "wind_speed"); if(wind == NULL){ gl_error("Unable to find wind_speed property in weather object!"); ++w_rv; } rain = gl_get_property(weather, "rainfall"); /* not yet implemented in climate */ if(rain == NULL){ gl_error("Unable to find rainfall property in weather object!"); //++w_rv; } } rv = load::init(parent); return w_rv ? 0 : rv; }
int passive_controller::init(OBJECT *parent){ OBJECT *hdr = OBJECTHDR(this); PROPERTY *enduseProperty; if(parent == NULL){ gl_error("passive_controller has no parent and will be operating in 'dummy' mode"); } else { if(output_state_propname[0] == 0 && output_setpoint_propname[0] == 0){ GL_THROW("passive_controller has no output properties"); } // expectation_addr if(expectation_object != 0){ expectation_property = gl_get_property(expectation_object, expectation_propname); if(expectation_property == 0){ GL_THROW("passive_controller cannot find its expectation property"); } expectation_addr = (void *)((unsigned int64)expectation_object + sizeof(OBJECT) + (unsigned int64)expectation_property->addr); } if(observation_object != 0){ // observation_addr observation_prop = gl_get_property(observation_object, observation_propname); if(observation_prop != 0){ observation_addr = (void *)((unsigned int64)observation_object + sizeof(OBJECT) + (unsigned int64)observation_prop->addr); } if (pool_pump_model == false) { // observation_mean_addr observation_mean_prop = gl_get_property(observation_object, observation_mean_propname); if(observation_mean_prop != 0){ observation_mean_addr = (void *)((unsigned int64)observation_object + sizeof(OBJECT) + (unsigned int64)observation_mean_prop->addr); } // observation_stdev_addr stdev_observation_property = gl_get_property(observation_object, observation_stdev_propname); if(stdev_observation_property != 0){ observation_stdev_addr = (void *)((unsigned int64)observation_object + sizeof(OBJECT) + (unsigned int64)stdev_observation_property->addr); } } } // output_state if(output_state_propname[0] != 0){ output_state_prop = gl_get_property(parent, output_state_propname); if(output_state_prop == NULL){ GL_THROW("passive_controller parent \"%s\" does not contain property \"%s\"", (parent->name ? parent->name : "anon"), output_state_propname.get_string()); } output_state_addr = (void *)((unsigned int64)parent + sizeof(OBJECT) + (unsigned int64)output_state_prop->addr); } // output_setpoint if (control_mode != this->CM_PROBOFF && control_mode != this->CM_ELASTICITY_MODEL) { if(output_setpoint_propname[0] == 0 && output_setpoint_propname[0] == 0){ GL_THROW("passive_controller has no output properties"); } if(output_setpoint_propname[0] != 0){ output_setpoint_property = gl_get_property(parent, output_setpoint_propname); if(output_setpoint_property == NULL){ GL_THROW("passive_controller parent \"%s\" does not contain property \"%s\"", (parent->name ? parent->name : "anon"), output_setpoint_propname.get_string()); } output_setpoint_addr = (void *)((unsigned int64)parent + sizeof(OBJECT) + (unsigned int64)output_setpoint_property->addr); } } } if (pool_pump_model == false && control_mode != CM_ELASTICITY_MODEL) gl_set_dependent(hdr, expectation_object); gl_set_dependent(hdr, observation_object); if(observation_object == NULL){ GL_THROW("passive_controller observation_object object is undefined, and can not function"); } // // make sure that the observation_object and expectable are ranked above the controller // if(base_setpoint != 0.0){ orig_setpoint = 1; } if (pool_pump_model == true) { if (control_mode != CM_DUTYCYCLE) GL_THROW("pool pump mode must be used with control mode set to DUTYCYCLE"); if (firstTierHours == 0 || secondTierHours == 0) GL_THROW("Please set first and second tier hours in pool pump duty cycle mode"); if (firstTierPrice == 0 || secondTierPrice == 0) GL_THROW("Please set first and second tier prices in pool pump duty cycle mode"); } if(dPeriod == 0.0){ dPeriod = 300.0; period = 300; // five minutes } else { period = (TIMESTAMP)floor(dPeriod + 0.5); } if (gl_object_isa(parent,"ZIPload","residential")) { zipLoadParent = true; } if(zipLoadParent == true && control_mode == CM_ELASTICITY_MODEL){ ThirdTierArraySize = 0; SecondTierArraySize = 0; FirstTierArraySize = 0; elasticityPeriod = 24; if(subElasticityFirstSecond > 0) gl_warning("The peak to offpeak Substitution Elasticity is positive. While this is allowed, it is typically the reverse of convention, as an increase in peak to offpeak price ratio generally produces a reduction in peak load to offpeak load. This is indicated by a negative peak to offpeak Substitution Elasticity value."); if(subElasticityFirstThird > 0) gl_warning("The critical peak to offpeak Substitution Elasticity is positive. While this is allowed, it is typically the reverse of convention, as an increase in critical peak to offpeak price ratio generally produces a reduction in peak load to offpeak load. This is indicated by a negative critical peak to offpeak Substitution Elasticity value."); if(dailyElasticity > 0) gl_warning("The Daily Elasticity is positive. While this is allowed, it is typically the reverse of convention, as an increase in daily price generally produces a reduction in daily load. This is indicated by a negative Daily Elasticity value."); if(critical_day >= 0.5){ if (firstTierPrice == 0) GL_THROW("Please set first tier price in the Elasticity Model"); if (oldFirstTierPrice == 0) GL_THROW("Please set old first tier price in the Elasticity Model"); if (thirdTierHours == 0) GL_THROW("Please set third tier hours in the Elasticity Model"); if (thirdTierPrice == 0) GL_THROW("Please set third tier price in the Elasticity Model"); if (oldThirdTierPrice == 0){ oldThirdTierPrice = oldFirstTierPrice; gl_warning("Old third tier price is missing. System will assume the old pricing scheme was a fixed pricing scheme and use the old first tier price"); } if(check_two_tier_cpp != true){ if (secondTierHours == 0) GL_THROW("Please set second tier hours in the Elasticity Model"); if (secondTierPrice == 0) GL_THROW("Please set second tier price in the Elasticity Model"); if (oldSecondTierPrice == 0){ oldSecondTierPrice = oldFirstTierPrice; gl_warning("Old second tier price is missing. System will assume the old pricing scheme was a fixed pricing scheme and use the old first tier price"); } if(firstTierHours == 0){ firstTierHours = elasticityPeriod - thirdTierHours - secondTierHours; } else{ if((thirdTierHours+secondTierHours+firstTierHours) != elasticityPeriod) GL_THROW("Please set the tier hours correctly in the Elasticity Model"); } SecondTierArraySize = (int)(((secondTierHours * 3600) / period)); //Calculation of the price ratios and change in price ratios. //This will not change for the course of the simulation oldPriceRatioSecondFirst = oldSecondTierPrice/oldFirstTierPrice; newPriceRatioSecondFirst = secondTierPrice/firstTierPrice; if(linearizeElasticity == true) { peakPriceMultiplier = pow(newPriceRatioSecondFirst/oldPriceRatioSecondFirst,subElasticityFirstSecond); } else{ peakPriceMultiplier = 1 + ((subElasticityFirstSecond)*(newPriceRatioSecondFirst-oldPriceRatioSecondFirst)/oldPriceRatioSecondFirst); priceDiffSecond = secondTierPrice - oldSecondTierPrice; } } else{ if(firstTierHours == 0){ firstTierHours = elasticityPeriod - thirdTierHours; } else{ if((thirdTierHours+firstTierHours) != elasticityPeriod) GL_THROW("Please set the tier hours correctly in the Elasticity Model"); } } ThirdTierArraySize = (int)(((thirdTierHours * 3600) / period)); //Calculation of the price ratios and change in price ratios. //This will not change for the course of the simulation oldPriceRatioThirdFirst = oldThirdTierPrice/oldFirstTierPrice; newPriceRatioThirdFirst = thirdTierPrice/firstTierPrice; if(linearizeElasticity == true) { criticalPriceMultiplier = pow(newPriceRatioThirdFirst/oldPriceRatioThirdFirst,subElasticityFirstThird); } else{ criticalPriceMultiplier = 1 + ((subElasticityFirstThird)*(newPriceRatioThirdFirst-oldPriceRatioThirdFirst)/oldPriceRatioThirdFirst); priceDiffThird = thirdTierPrice - oldThirdTierPrice; } } else{ if (firstTierPrice == 0) GL_THROW("Please set first tier price in the Elasticity Model"); if (oldFirstTierPrice == 0) GL_THROW("Please set old first tier price in the Elasticity Model"); if(firstTierHours == 0){ firstTierHours = elasticityPeriod - secondTierHours; } else{ if((secondTierHours+firstTierHours) != elasticityPeriod) GL_THROW("Please set the tier hours correctly in the Elasticity Model"); } if (secondTierHours == 0) GL_THROW("Please set second tier hours in the Elasticity Model"); if (secondTierPrice == 0) GL_THROW("Please set second tier price in the Elasticity Model"); if (oldSecondTierPrice == 0){ oldSecondTierPrice = oldFirstTierPrice; gl_warning("Old second tier price is missing. System will assume the old pricing scheme was a fixed pricing scheme and use the old first tier price"); } SecondTierArraySize = (int)(((secondTierHours * 3600) / period)); //Calculation of the price ratios and change in price ratios. //This will not change for the course of the simulation oldPriceRatioSecondFirst = oldSecondTierPrice/oldFirstTierPrice; newPriceRatioSecondFirst = secondTierPrice/firstTierPrice; if(linearizeElasticity == true) { peakPriceMultiplier = pow(newPriceRatioSecondFirst/oldPriceRatioSecondFirst,subElasticityFirstSecond); } else{ peakPriceMultiplier = 1 + ((subElasticityFirstSecond)*(newPriceRatioSecondFirst-oldPriceRatioSecondFirst)/oldPriceRatioSecondFirst); priceDiffSecond = secondTierPrice - oldSecondTierPrice; } } FirstTierArraySize = (int)(((firstTierHours * 3600) / period)); priceDiffFirst = firstTierPrice - oldFirstTierPrice; ArraySize = (int)(((elasticityPeriod * 3600) / period)); if(price_offset==0) price_offset = 10E-6 ; tier_prices = (double *)gl_malloc(ArraySize*sizeof(double)); if (tier_prices == NULL) GL_THROW("Failure to allocate tier_prices array"); cleared_load = (double *)gl_malloc(ArraySize*sizeof(double)); if (cleared_load == NULL) GL_THROW("Failure to allocate cleared_load array"); offPeakLoad = (double *)gl_malloc(FirstTierArraySize*sizeof(double)); if (offPeakLoad == NULL) GL_THROW("Failure to allocate offPeakLoad array"); peakLoad = (double *)gl_malloc(SecondTierArraySize*sizeof(double)); if (peakLoad == NULL) GL_THROW("Failure to allocate peakLoad array"); criticalPeakLoad = (double *)gl_malloc(ThirdTierArraySize*sizeof(double)); if (criticalPeakLoad == NULL) GL_THROW("Failure to allocate criticalPeakLoad array"); //Link up to parent object enduseProperty = gl_get_property(parent,"base_power"); if (enduseProperty == NULL) GL_THROW("Unable to map base power property"); current_load_enduse = (enduse*)GETADDR(parent,enduseProperty); //Initialize the array locations ArrayIndex = 0; ThirdTierArrayIndex = 0; SecondTierArrayIndex = 0; FirstTierArrayIndex = 0; for(int32 i=0; i < ArraySize; i++){ tier_prices[i] = 0; cleared_load[i] = 0; } for(int32 i=0; i < FirstTierArraySize; i++){ offPeakLoad[i] = 0; } for(int32 i=0; i < SecondTierArraySize; i++){ peakLoad[i] = 0; } for(int32 i=0; i < ThirdTierArraySize; i++){ criticalPeakLoad[i] = 0; } } return 1; }
/* Object initialization is called once after all object have been created */ int office::init(OBJECT *parent) { double oversize = 1.2; /* oversizing factor */ update_control_setpoints(); /* sets up default office parameters if none were passed: floor height = 9ft; interior mass = 2000 Btu/degF; interior/exterior ua = 2 Btu/degF/h; floor area = 4000 sf*/ if (zone.design.floor_area == 0) zone.design.floor_area = 10000; if (zone.design.floor_height == 0) zone.design.floor_height = 9; if (zone.design.interior_mass == 0) zone.design.interior_mass = 40000; if (zone.design.interior_ua == 0) zone.design.interior_ua = 1; if (zone.design.exterior_ua == 0) zone.design.exterior_ua = .375; if (zone.hvac.cooling.design_temperature == 0) zone.hvac.cooling.design_temperature = 93; // Pittsburgh, PA if (zone.hvac.heating.design_temperature == 0) zone.hvac.heating.design_temperature = -6; // Pittsburgh, PA if (zone.hvac.minimum_ach==0) zone.hvac.minimum_ach = 1.5; if (zone.control.economizer_cutin==0) zone.control.economizer_cutin=60; if (zone.control.auxiliary_cutin==0) zone.control.auxiliary_cutin=2; /* schedule */ if (strcmp(zone.design.schedule,"")==0) strcpy(zone.design.schedule,"1-5 8-17"); /* default is unoccupied, MTWRF 8a-5p is occupied */ occupancy_schedule(zone.design.schedule,occupied); /* automatic sizing of HVAC equipment */ if (zone.hvac.heating.capacity==0) zone.hvac.heating.capacity = oversize*(zone.design.exterior_ua*(zone.control.heating_setpoint-zone.hvac.heating.design_temperature) /* envelope */ - (zone.hvac.heating.design_temperature - zone.control.heating_setpoint) * (0.2402 * 0.0735 * zone.design.floor_height * zone.design.floor_area) * zone.hvac.minimum_ach); /* vent */ if (zone.hvac.cooling.capacity==0) zone.hvac.cooling.capacity = oversize*(-zone.design.exterior_ua*(zone.hvac.cooling.design_temperature-zone.control.cooling_setpoint) /* envelope */ - (zone.design.window_area[0]+zone.design.window_area[1]+zone.design.window_area[2]+zone.design.window_area[3]+zone.design.window_area[4] +zone.design.window_area[5]+zone.design.window_area[6]+zone.design.window_area[7]+zone.design.window_area[8])*100*3.412*zone.design.glazing_coeff /* solar */ - (zone.hvac.cooling.design_temperature - zone.control.cooling_setpoint) * (0.2402 * 0.0735 * zone.design.floor_height * zone.design.floor_area) * zone.hvac.minimum_ach /* vent */ - (zone.lights.capacity + zone.plugs.capacity)*3.412); /* lights and plugs */ if (zone.hvac.cooling.cop==0) zone.hvac.cooling.cop=-3; if (zone.hvac.heating.cop==0) zone.hvac.heating.cop= 1.25; OBJECT *hdr = OBJECTHDR(this); // link to climate data static FINDLIST *climates = gl_find_objects(FL_NEW,FT_CLASS,SAME,"climate",FT_END); if (climates==NULL) gl_warning("office: no climate data found, using static data"); else if (climates->hit_count>1) gl_warning("house: %d climates found, using first one defined", climates->hit_count); if (climates->hit_count>0) { OBJECT *obj = gl_find_next(climates,NULL); if (obj->rank<=hdr->rank) gl_set_dependent(obj,hdr); zone.current.pTemperature = (double*)GETADDR(obj,gl_get_property(obj,"temperature")); zone.current.pHumidity = (double*)GETADDR(obj,gl_get_property(obj,"humidity")); zone.current.pSolar = (double*)GETADDR(obj,gl_get_property(obj,"solar_flux")); } /* sanity check the initial values (no ticket) */ struct { char *desc; bool test; } map[] = { /* list simple tests to be made on data (no ticket) */ {"floor height is not valid", zone.design.floor_height<=0}, {"interior mass is not valid", zone.design.interior_mass<=0}, {"interior UA is not valid", zone.design.interior_ua<=0}, {"exterior UA is not valid", zone.design.exterior_ua<=0}, {"floor area is not valid",zone.design.floor_area<=0}, {"control setpoint deadpoint is invalid", zone.control.setpoint_deadband<=0}, {"heating and cooling setpoints conflict",TheatOn>=TcoolOff}, {"cooling capacity is not negative", zone.hvac.cooling.capacity>=0}, {"heating capacity is not positive", zone.hvac.heating.capacity<=0}, {"cooling cop is not negative", zone.hvac.cooling.cop>=0}, {"heating cop is not positive", zone.hvac.heating.cop<=0}, {"minimum ach is not positive", zone.hvac.minimum_ach<=0}, {"auxiliary cutin is not positive", zone.control.auxiliary_cutin<=0}, {"economizer cutin is above cooling setpoint deadband", zone.control.economizer_cutin>=zone.control.cooling_setpoint-zone.control.setpoint_deadband}, }; int i; for (i=0; i<sizeof(map)/sizeof(map[0]); i++) { if (map[i].test) throw map[i].desc; } return 1; /* return 1 on success, 0 on failure */ }
/* Checks for climate object and maps the climate variables to the windturb object variables. If no climate object is linked, then default pressure, temperature, and wind speed will be used. */ int windturb_dg::init_climate() { OBJECT *hdr = OBJECTHDR(this); // link to climate data static FINDLIST *climates = NULL; int not_found = 0; climates = gl_find_objects(FL_NEW,FT_CLASS,SAME,"climate",FT_END); if (climates==NULL) { not_found = 1; gl_warning("windturb_dg (id:%d)::init_climate(): no climate data found, using static data",hdr->id); //default to mock data static double air_dens = std_air_dens, avgWS = avg_ws, Press = std_air_press, Temp = std_air_temp; pWS = &avgWS; pPress = &Press; pTemp = &Temp; } else if (climates->hit_count>1) { gl_verbose("windturb_dg: %d climates found, using first one defined", climates->hit_count); } // } if (climates!=NULL) { if (climates->hit_count==0) { //default to mock data gl_warning("windturb_dg (id:%d)::init_climate(): no climate data found, using static data",hdr->id); static double air_dens = std_air_dens, avgWS = avg_ws, Press = std_air_press, Temp = std_air_temp; pWS = &avgWS; pPress = &Press; pTemp = &Temp; } else //climate data was found { // force rank of object w.r.t climate OBJECT *obj = gl_find_next(climates,NULL); if (obj->rank<=hdr->rank) gl_set_dependent(obj,hdr); pWS = (double*)GETADDR(obj,gl_get_property(obj,"wind_speed")); pPress = (double*)GETADDR(obj,gl_get_property(obj,"pressure")); pTemp = (double*)GETADDR(obj,gl_get_property(obj,"temperature")); //Make sure it worked if (pWS==NULL) { GL_THROW("windturb_dg (id:%d): Unable to map wind_speed from climate object",obj->id); } if (pPress==NULL) { GL_THROW("windturb_dg (id:%d): Unable to map air pressure from climate object",obj->id); } if (pTemp==NULL) { GL_THROW("windturb_dg (id:%d): Unable to map air temperature from climate object",obj->id); } } } return 1; }