void main(void)
{
struct nano_timer timer;
uint32_t timer_data[2] = {0, 0};
struct device *glcd;
char str[20];
int rgb[] = { 0x0, 0x0, 0x0 };
uint8_t rgb_chg[3];
const uint8_t rgb_step = 16;
uint8_t set_config;
int i, j, m;
int cnt;
nano_timer_init(&timer, timer_data);
glcd = device_get_binding(GROVE_LCD_NAME);
if (!glcd) {
printk("Grove LCD: Device not found.\n");
}
/* Now configure the LCD the way we want it */
set_config = GLCD_FS_ROWS_2
| GLCD_FS_DOT_SIZE_LITTLE
| GLCD_FS_8BIT_MODE;
glcd_function_set(glcd, set_config);
set_config = GLCD_DS_DISPLAY_ON | GLCD_DS_CURSOR_ON | GLCD_DS_BLINK_ON;
glcd_display_state_set(glcd, set_config);
/* Setup variables /*/
for (i = 0; i < sizeof(str); i++) {
str[i] = '\0';
}
/* Starting counting */
cnt = 0;
while (1) {
glcd_cursor_pos_set(glcd, 0, 0);
/* RGB values are from 0 - 511.
* First half means incrementally brighter.
* Second half is opposite (i.e. goes darker).
*/
/* Update the RGB values for backlight */
m = (rgb[2] > 255) ? (512 - rgb[2]) : (rgb[2]);
rgb_chg[2] = clamp_rgb(m);
m = (rgb[1] > 255) ? (512 - rgb[1]) : (rgb[1]);
rgb_chg[1] = clamp_rgb(m);
m = (rgb[0] > 255) ? (512 - rgb[0]) : (rgb[0]);
rgb_chg[0] = clamp_rgb(m);
glcd_color_set(glcd, rgb_chg[0], rgb_chg[1], rgb_chg[2]);
/* Display the counter
*
* well... sprintf() might be easier,
* but this is more fun.
*/
m = cnt;
i = 1000000000;
j = 0;
while (i > 0) {
str[j] = '0' + (m / i);
m = m % i;
i = i / 10;
j++;
}
cnt++;
glcd_print(glcd, str, j);
/* Rotate RGB values */
rgb[2] += rgb_step;
if (rgb[2] > 511) {
rgb[2] = 0;
rgb[1] += rgb_step;
}
if (rgb[1] > 511) {
rgb[1] = 0;
rgb[0] += rgb_step;
}
if (rgb[0] > 511) {
rgb[0] = 0;
}
/* wait a while */
nano_task_timer_start(&timer, SLEEPTICKS);
nano_task_timer_test(&timer, TICKS_UNLIMITED);
}
}
void main(void)
{
struct device *dev[ARRAY_SIZE(info)];
struct sensor_value val[ARRAY_SIZE(info)];
unsigned int i;
int rc;
for (i = 0; i < ARRAY_SIZE(info); i++) {
dev[i] = device_get_binding(info[i].dev_name);
if (dev[i] == NULL) {
printk("Failed to get \"%s\" device\n",
info[i].dev_name);
return;
}
}
#ifdef CONFIG_GROVE_LCD_RGB
struct device *glcd;
glcd = device_get_binding(GROVE_LCD_NAME);
if (glcd == NULL) {
printk("Failed to get Grove LCD\n");
return;
}
/* configure LCD */
glcd_function_set(glcd, GLCD_FS_ROWS_2 | GLCD_FS_DOT_SIZE_LITTLE |
GLCD_FS_8BIT_MODE);
glcd_display_state_set(glcd, GLCD_DS_DISPLAY_ON);
#endif
while (1) {
/* fetch sensor samples */
for (i = 0; i < ARRAY_SIZE(info); i++) {
rc = sensor_sample_fetch(dev[i]);
if (rc) {
printk("Failed to fetch sample for device %s (%d)\n",
info[i].dev_name, rc);
}
}
for (i = 0; i < ARRAY_SIZE(info); i++) {
rc = sensor_channel_get(dev[i], info[i].chan, &val[i]);
if (rc) {
printk("Failed to get data for device %s (%d)\n",
info[i].dev_name, rc);
continue;
}
}
#ifdef CONFIG_GROVE_LCD_RGB
char row[16];
/* clear LCD */
memset(row, ' ', sizeof(row));
glcd_cursor_pos_set(glcd, 0, 0);
glcd_print(glcd, row, sizeof(row));
glcd_cursor_pos_set(glcd, 0, 1);
glcd_print(glcd, row, sizeof(row));
/* display temperature on LCD */
glcd_cursor_pos_set(glcd, 0, 0);
sprintf(row, "T:%.1f%cC", sensor_value_to_double(val),
223 /* degree symbol */);
glcd_print(glcd, row, strlen(row));
/* display himidity on LCD */
glcd_cursor_pos_set(glcd, 17 - strlen(row), 0);
sprintf(row, "RH:%.0f%c", sensor_value_to_double(val + 1),
37 /* percent symbol */);
glcd_print(glcd, row, strlen(row));
#endif
k_sleep(2000);
}
}
