コード例 #1
0
void throttle_vm_writeout(gfp_t gfp_mask)
{
	unsigned long background_thresh;
	unsigned long dirty_thresh;

        for ( ; ; ) {
		global_dirty_limits(&background_thresh, &dirty_thresh);

                /*
                 * Boost the allowable dirty threshold a bit for page
                 * allocators so they don't get DoS'ed by heavy writers
                 */
                dirty_thresh += dirty_thresh / 10;      /* wheeee... */

                if (global_page_state(NR_UNSTABLE_NFS) +
			global_page_state(NR_WRITEBACK) <= dirty_thresh)
                        	break;
                congestion_wait(BLK_RW_ASYNC, HZ/10);

		/*
		 * The caller might hold locks which can prevent IO completion
		 * or progress in the filesystem.  So we cannot just sit here
		 * waiting for IO to complete.
		 */
		if ((gfp_mask & (__GFP_FS|__GFP_IO)) != (__GFP_FS|__GFP_IO))
			break;
        }
}
コード例 #2
0
ファイル: page-writeback.c プロジェクト: Adjustxx/Savaged-Zen
/*
 * After a task dirtied this many pages, balance_dirty_pages_ratelimited_nr()
 * will look to see if it needs to start dirty throttling.
 *
 * If ratelimit_pages is too low then big NUMA machines will call the expensive
 * global_page_state() too often. So scale it adaptively to the safety margin
 * (the number of pages we may dirty without exceeding the dirty limits).
 */
static unsigned long ratelimit_pages(struct backing_dev_info *bdi)
{
	unsigned long background_thresh;
	unsigned long dirty_thresh;
	unsigned long dirty_pages;

	global_dirty_limits(&background_thresh, &dirty_thresh);
	dirty_pages = global_page_state(NR_FILE_DIRTY) +
		      global_page_state(NR_WRITEBACK) +
		      global_page_state(NR_UNSTABLE_NFS);

	if (dirty_pages <= (dirty_thresh + background_thresh) / 2)
		goto out;

	dirty_thresh = bdi_dirty_limit(bdi, dirty_thresh, dirty_pages);
	dirty_pages  = bdi_stat(bdi, BDI_RECLAIMABLE) +
		       bdi_stat(bdi, BDI_WRITEBACK);

	if (dirty_pages < dirty_thresh)
		goto out;

	return 1;
out:
	return 1 + int_sqrt(dirty_thresh - dirty_pages);
}
コード例 #3
0
ファイル: backing-dev.c プロジェクト: 020gzh/linux
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
	struct backing_dev_info *bdi = m->private;
	struct bdi_writeback *wb = &bdi->wb;
	unsigned long background_thresh;
	unsigned long dirty_thresh;
	unsigned long wb_thresh;
	unsigned long nr_dirty, nr_io, nr_more_io, nr_dirty_time;
	struct inode *inode;

	nr_dirty = nr_io = nr_more_io = nr_dirty_time = 0;
	spin_lock(&wb->list_lock);
	list_for_each_entry(inode, &wb->b_dirty, i_io_list)
		nr_dirty++;
	list_for_each_entry(inode, &wb->b_io, i_io_list)
		nr_io++;
	list_for_each_entry(inode, &wb->b_more_io, i_io_list)
		nr_more_io++;
	list_for_each_entry(inode, &wb->b_dirty_time, i_io_list)
		if (inode->i_state & I_DIRTY_TIME)
			nr_dirty_time++;
	spin_unlock(&wb->list_lock);

	global_dirty_limits(&background_thresh, &dirty_thresh);
	wb_thresh = wb_calc_thresh(wb, dirty_thresh);

#define K(x) ((x) << (PAGE_SHIFT - 10))
	seq_printf(m,
		   "BdiWriteback:       %10lu kB\n"
		   "BdiReclaimable:     %10lu kB\n"
		   "BdiDirtyThresh:     %10lu kB\n"
		   "DirtyThresh:        %10lu kB\n"
		   "BackgroundThresh:   %10lu kB\n"
		   "BdiDirtied:         %10lu kB\n"
		   "BdiWritten:         %10lu kB\n"
		   "BdiWriteBandwidth:  %10lu kBps\n"
		   "b_dirty:            %10lu\n"
		   "b_io:               %10lu\n"
		   "b_more_io:          %10lu\n"
		   "b_dirty_time:       %10lu\n"
		   "bdi_list:           %10u\n"
		   "state:              %10lx\n",
		   (unsigned long) K(wb_stat(wb, WB_WRITEBACK)),
		   (unsigned long) K(wb_stat(wb, WB_RECLAIMABLE)),
		   K(wb_thresh),
		   K(dirty_thresh),
		   K(background_thresh),
		   (unsigned long) K(wb_stat(wb, WB_DIRTIED)),
		   (unsigned long) K(wb_stat(wb, WB_WRITTEN)),
		   (unsigned long) K(wb->write_bandwidth),
		   nr_dirty,
		   nr_io,
		   nr_more_io,
		   nr_dirty_time,
		   !list_empty(&bdi->bdi_list), bdi->wb.state);
#undef K

	return 0;
}
コード例 #4
0
ファイル: backing-dev.c プロジェクト: Snuzzo/funky_msm8960
static int bdi_debug_stats_show(struct seq_file *m, void *v)
{
	struct backing_dev_info *bdi = m->private;
	struct bdi_writeback *wb = &bdi->wb;
	unsigned long background_thresh;
	unsigned long dirty_thresh;
	unsigned long bdi_thresh;
	unsigned long nr_dirty, nr_io, nr_more_io;
	struct inode *inode;

	nr_dirty = nr_io = nr_more_io = 0;
	spin_lock(&inode_wb_list_lock);
	list_for_each_entry(inode, &wb->b_dirty, i_wb_list)
		nr_dirty++;
	list_for_each_entry(inode, &wb->b_io, i_wb_list)
		nr_io++;
	list_for_each_entry(inode, &wb->b_more_io, i_wb_list)
		nr_more_io++;
	spin_unlock(&inode_wb_list_lock);

	global_dirty_limits(&background_thresh, &dirty_thresh);
	bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);

#define K(x) ((x) << (PAGE_SHIFT - 10))
	seq_printf(m,
		   "BdiWriteback:     %8lu kB\n"
		   "BdiReclaimable:   %8lu kB\n"
		   "BdiDirtyThresh:   %8lu kB\n"
		   "DirtyThresh:      %8lu kB\n"
		   "BackgroundThresh: %8lu kB\n"
		   "b_dirty:          %8lu\n"
		   "b_io:             %8lu\n"
		   "b_more_io:        %8lu\n"
		   "bdi_list:         %8u\n"
		   "state:            %8lx\n",
		   (unsigned long) K(bdi_stat(bdi, BDI_WRITEBACK)),
		   (unsigned long) K(bdi_stat(bdi, BDI_RECLAIMABLE)),
		   K(bdi_thresh), K(dirty_thresh),
		   K(background_thresh), nr_dirty, nr_io, nr_more_io,
		   !list_empty(&bdi->bdi_list), bdi->state);
#undef K

	return 0;
}
コード例 #5
0
/*
 * balance_dirty_pages() must be called by processes which are generating dirty
 * data.  It looks at the number of dirty pages in the machine and will force
 * the caller to perform writeback if the system is over `vm_dirty_ratio'.
 * If we're over `background_thresh' then the writeback threads are woken to
 * perform some writeout.
 */
static void balance_dirty_pages(struct address_space *mapping,
				unsigned long write_chunk)
{
	long nr_reclaimable, bdi_nr_reclaimable;
	long nr_writeback, bdi_nr_writeback;
	unsigned long background_thresh;
	unsigned long dirty_thresh;
	unsigned long bdi_thresh;
	unsigned long pages_written = 0;
	unsigned long pause = 1;
	bool dirty_exceeded = false;
	struct backing_dev_info *bdi = mapping->backing_dev_info;

	for (;;) {
		struct writeback_control wbc = {
			.sync_mode	= WB_SYNC_NONE,
			.older_than_this = NULL,
			.nr_to_write	= write_chunk,
			.range_cyclic	= 1,
		};

		nr_reclaimable = global_page_state(NR_FILE_DIRTY) +
					global_page_state(NR_UNSTABLE_NFS);
		nr_writeback = global_page_state(NR_WRITEBACK);

		global_dirty_limits(&background_thresh, &dirty_thresh);

		/*
		 * Throttle it only when the background writeback cannot
		 * catch-up. This avoids (excessively) small writeouts
		 * when the bdi limits are ramping up.
		 */
		if (nr_reclaimable + nr_writeback <=
				(background_thresh + dirty_thresh) / 2)
			break;

		bdi_thresh = bdi_dirty_limit(bdi, dirty_thresh);
		bdi_thresh = task_dirty_limit(current, bdi_thresh);

		/*
		 * In order to avoid the stacked BDI deadlock we need
		 * to ensure we accurately count the 'dirty' pages when
		 * the threshold is low.
		 *
		 * Otherwise it would be possible to get thresh+n pages
		 * reported dirty, even though there are thresh-m pages
		 * actually dirty; with m+n sitting in the percpu
		 * deltas.
		 */
		if (bdi_thresh < 2*bdi_stat_error(bdi)) {
			bdi_nr_reclaimable = bdi_stat_sum(bdi, BDI_RECLAIMABLE);
			bdi_nr_writeback = bdi_stat_sum(bdi, BDI_WRITEBACK);
		} else {
			bdi_nr_reclaimable = bdi_stat(bdi, BDI_RECLAIMABLE);
			bdi_nr_writeback = bdi_stat(bdi, BDI_WRITEBACK);
		}

		/*
		 * The bdi thresh is somehow "soft" limit derived from the
		 * global "hard" limit. The former helps to prevent heavy IO
		 * bdi or process from holding back light ones; The latter is
		 * the last resort safeguard.
		 */
		dirty_exceeded =
			(bdi_nr_reclaimable + bdi_nr_writeback > bdi_thresh)
			|| (nr_reclaimable + nr_writeback > dirty_thresh);

		if (!dirty_exceeded)
			break;

		if (!bdi->dirty_exceeded)
			bdi->dirty_exceeded = 1;

		/* Note: nr_reclaimable denotes nr_dirty + nr_unstable.
		 * Unstable writes are a feature of certain networked
		 * filesystems (i.e. NFS) in which data may have been
		 * written to the server's write cache, but has not yet
		 * been flushed to permanent storage.
		 * Only move pages to writeback if this bdi is over its
		 * threshold otherwise wait until the disk writes catch
		 * up.
		 */
		trace_wbc_balance_dirty_start(&wbc, bdi);
		if (bdi_nr_reclaimable > bdi_thresh) {
			writeback_inodes_wb(&bdi->wb, &wbc);
			pages_written += write_chunk - wbc.nr_to_write;
			trace_wbc_balance_dirty_written(&wbc, bdi);
			if (pages_written >= write_chunk)
				break;		/* We've done our duty */
		}
		trace_wbc_balance_dirty_wait(&wbc, bdi);
		__set_current_state(TASK_UNINTERRUPTIBLE);
		io_schedule_timeout(pause);

		/*
		 * Increase the delay for each loop, up to our previous
		 * default of taking a 100ms nap.
		 */
		pause <<= 1;
		if (pause > HZ / 10)
			break;
	}

	if (!dirty_exceeded && bdi->dirty_exceeded)
		bdi->dirty_exceeded = 0;

	if (writeback_in_progress(bdi))
		return;

	/*
	 * In laptop mode, we wait until hitting the higher threshold before
	 * starting background writeout, and then write out all the way down
	 * to the lower threshold.  So slow writers cause minimal disk activity.
	 *
	 * In normal mode, we start background writeout at the lower
	 * background_thresh, to keep the amount of dirty memory low.
	 */
	if ((laptop_mode && pages_written) ||
	    (!laptop_mode && (nr_reclaimable > background_thresh)))
		bdi_start_background_writeback(bdi);
}

void set_page_dirty_balance(struct page *page, int page_mkwrite)
{
	if (set_page_dirty(page) || page_mkwrite) {
		struct address_space *mapping = page_mapping(page);

		if (mapping)
			balance_dirty_pages_ratelimited(mapping);
	}
}

static DEFINE_PER_CPU(unsigned long, bdp_ratelimits) = 0;

/**
 * balance_dirty_pages_ratelimited_nr - balance dirty memory state
 * @mapping: address_space which was dirtied
 * @nr_pages_dirtied: number of pages which the caller has just dirtied
 *
 * Processes which are dirtying memory should call in here once for each page
 * which was newly dirtied.  The function will periodically check the system's
 * dirty state and will initiate writeback if needed.
 *
 * On really big machines, get_writeback_state is expensive, so try to avoid
 * calling it too often (ratelimiting).  But once we're over the dirty memory
 * limit we decrease the ratelimiting by a lot, to prevent individual processes
 * from overshooting the limit by (ratelimit_pages) each.
 */
void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
					unsigned long nr_pages_dirtied)
{
	unsigned long ratelimit;
	unsigned long *p;

	ratelimit = ratelimit_pages;
	if (mapping->backing_dev_info->dirty_exceeded)
		ratelimit = 8;

	/*
	 * Check the rate limiting. Also, we do not want to throttle real-time
	 * tasks in balance_dirty_pages(). Period.
	 */
	preempt_disable();
	p =  &__get_cpu_var(bdp_ratelimits);
	*p += nr_pages_dirtied;
	if (unlikely(*p >= ratelimit)) {
		ratelimit = sync_writeback_pages(*p);
		*p = 0;
		preempt_enable();
		balance_dirty_pages(mapping, ratelimit);
		return;
	}
	preempt_enable();
}