int load_isetting(const char *section, char* setting, int defvalue)
{
void *sesskey;
int res = 0;
sesskey = gStorage->open_settings_r(section);
gppi(gStorage, sesskey, setting, defvalue, &res);
gStorage->close_settings_r(sesskey);
return res;
}
void load_settings(char *section, int do_host, Config * cfg)
{
int i;
char prot[10];
void *sesskey;
sesskey = open_settings_r(section);
cfg->ssh_subsys = 0; /* FIXME: load this properly */
cfg->remote_cmd_ptr = cfg->remote_cmd;
cfg->remote_cmd_ptr2 = NULL;
if (do_host) {
gpps(sesskey, "HostName", "", cfg->host, sizeof(cfg->host));
} else {
cfg->host[0] = '\0'; /* blank hostname */
}
gpps(sesskey, "LogFileName", "putty.log",
cfg->logfilename, sizeof(cfg->logfilename));
gppi(sesskey, "LogType", 0, &cfg->logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, &cfg->logxfovr);
gpps(sesskey, "Protocol", "default", prot, 10);
cfg->protocol = default_protocol;
cfg->port = default_port;
for (i = 0; backends[i].name != NULL; i++)
if (!strcmp(prot, backends[i].name)) {
cfg->protocol = backends[i].protocol;
gppi(sesskey, "PortNumber", default_port, &cfg->port);
break;
}
gppi(sesskey, "CloseOnExit", COE_NORMAL, &cfg->close_on_exit);
gppi(sesskey, "WarnOnClose", 1, &cfg->warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
gppi(sesskey, "PingInterval", 0, &pingmin);
gppi(sesskey, "PingIntervalSecs", 0, &pingsec);
cfg->ping_interval = pingmin * 60 + pingsec;
}
gppi(sesskey, "TCPNoDelay", 1, &cfg->tcp_nodelay);
gpps(sesskey, "TerminalType", "xterm", cfg->termtype,
sizeof(cfg->termtype));
gpps(sesskey, "TerminalSpeed", "38400,38400", cfg->termspeed,
sizeof(cfg->termspeed));
{
char buf[2 * sizeof(cfg->environmt)], *p, *q;
gpps(sesskey, "Environment", "", buf, sizeof(buf));
p = buf;
q = cfg->environmt;
while (*p) {
while (*p && *p != ',') {
int c = *p++;
if (c == '=')
c = '\t';
if (c == '\\')
c = *p++;
*q++ = c;
}
if (*p == ',')
p++;
*q++ = '\0';
}
*q = '\0';
}
gpps(sesskey, "UserName", "", cfg->username, sizeof(cfg->username));
gpps(sesskey, "LocalUserName", "", cfg->localusername,
sizeof(cfg->localusername));
gppi(sesskey, "NoPTY", 0, &cfg->nopty);
gppi(sesskey, "Compression", 0, &cfg->compression);
gppi(sesskey, "AgentFwd", 0, &cfg->agentfwd);
gppi(sesskey, "ChangeUsername", 0, &cfg->change_username);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, cfg->ssh_cipherlist);
gppi(sesskey, "SshProt", 1, &cfg->sshprot);
gppi(sesskey, "BuggyMAC", 0, &cfg->buggymac);
gppi(sesskey, "SSH2DES", 0, &cfg->ssh2_des_cbc);
gppi(sesskey, "AuthTIS", 0, &cfg->try_tis_auth);
gppi(sesskey, "AuthKI", 1, &cfg->try_ki_auth);
gpps(sesskey, "PublicKeyFile", "", cfg->keyfile, sizeof(cfg->keyfile));
gpps(sesskey, "RemoteCommand", "", cfg->remote_cmd,
sizeof(cfg->remote_cmd));
gppi(sesskey, "RFCEnviron", 0, &cfg->rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, &cfg->passive_telnet);
gppi(sesskey, "BackspaceIsDelete", 1, &cfg->bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, &cfg->rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, &cfg->funky_type);
gppi(sesskey, "NoApplicationKeys", 0, &cfg->no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, &cfg->no_applic_c);
gppi(sesskey, "ApplicationCursorKeys", 0, &cfg->app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, &cfg->app_keypad);
gppi(sesskey, "NetHackKeypad", 0, &cfg->nethack_keypad);
gppi(sesskey, "AltF4", 1, &cfg->alt_f4);
gppi(sesskey, "AltSpace", 0, &cfg->alt_space);
gppi(sesskey, "AltOnly", 0, &cfg->alt_only);
gppi(sesskey, "ComposeKey", 0, &cfg->compose_key);
gppi(sesskey, "CtrlAltKeys", 1, &cfg->ctrlaltkeys);
gppi(sesskey, "TelnetKey", 0, &cfg->telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, &cfg->telnet_newline);
gppi(sesskey, "LocalEcho", LD_BACKEND, &cfg->localecho);
gppi(sesskey, "LocalEdit", LD_BACKEND, &cfg->localedit);
gpps(sesskey, "Answerback", "PuTTY", cfg->answerback,
sizeof(cfg->answerback));
gppi(sesskey, "AlwaysOnTop", 0, &cfg->alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, &cfg->fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, &cfg->hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, &cfg->sunken_edge);
gppi(sesskey, "WindowBorder", 1, &cfg->window_border);
gppi(sesskey, "CurType", 0, &cfg->cursor_type);
gppi(sesskey, "BlinkCur", 0, &cfg->blink_cur);
/* pedantic compiler tells me I can't use &cfg->beep as an int * :-) */
gppi(sesskey, "Beep", 1, &i); cfg->beep = i;
gppi(sesskey, "BeepInd", 0, &i); cfg->beep_ind = i;
gpps(sesskey, "BellWaveFile", "", cfg->bell_wavefile,
sizeof(cfg->bell_wavefile));
gppi(sesskey, "BellOverload", 1, &cfg->bellovl);
gppi(sesskey, "BellOverloadN", 5, &cfg->bellovl_n);
gppi(sesskey, "BellOverloadT", 2000, &cfg->bellovl_t);
gppi(sesskey, "BellOverloadS", 5000, &cfg->bellovl_s);
gppi(sesskey, "ScrollbackLines", 200, &cfg->savelines);
gppi(sesskey, "DECOriginMode", 0, &cfg->dec_om);
gppi(sesskey, "AutoWrapMode", 1, &cfg->wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, &cfg->lfhascr);
gppi(sesskey, "WinNameAlways", 0, &cfg->win_name_always);
gpps(sesskey, "WinTitle", "", cfg->wintitle, sizeof(cfg->wintitle));
gppi(sesskey, "TermWidth", 80, &cfg->width);
gppi(sesskey, "TermHeight", 24, &cfg->height);
gpps(sesskey, "Font", "Courier New", cfg->font, sizeof(cfg->font));
gppi(sesskey, "FontIsBold", 0, &cfg->fontisbold);
gppi(sesskey, "FontCharSet", ANSI_CHARSET, &cfg->fontcharset);
gppi(sesskey, "FontHeight", 10, &cfg->fontheight);
if (cfg->fontheight < 0) {
int oldh, newh;
HDC hdc = GetDC(NULL);
int logpix = GetDeviceCaps(hdc, LOGPIXELSY);
ReleaseDC(NULL, hdc);
oldh = -cfg->fontheight;
newh = MulDiv(oldh, 72, logpix) + 1;
if (MulDiv(newh, logpix, 72) > oldh)
newh--;
cfg->fontheight = newh;
}
gppi(sesskey, "FontVTMode", VT_UNICODE, (int *) &cfg->vtmode);
gppi(sesskey, "TryPalette", 0, &cfg->try_palette);
gppi(sesskey, "BoldAsColour", 1, &cfg->bold_colour);
for (i = 0; i < 22; i++) {
static char *defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255"
};
char buf[20], buf2[30];
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
cfg->colours[i][0] = c0;
cfg->colours[i][1] = c1;
cfg->colours[i][2] = c2;
}
}
gppi(sesskey, "RawCNP", 0, &cfg->rawcnp);
gppi(sesskey, "PasteRTF", 0, &cfg->rtf_paste);
gppi(sesskey, "MouseIsXterm", 0, &cfg->mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, &cfg->rect_select);
gppi(sesskey, "MouseOverride", 1, &cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
static char *defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], buf2[256], *p;
int j;
sprintf(buf, "Wordness%d", i);
gpps(sesskey, buf, defaults[i / 32], buf2, sizeof(buf2));
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
cfg->wordness[j] = atoi(q);
}
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
gpps(sesskey, "LineCodePage", "", cfg->line_codepage,
sizeof(cfg->line_codepage));
gppi (sesskey, "CapsLockCyr", 0, &cfg->xlat_capslockcyr);
gppi(sesskey, "ScrollBar", 1, &cfg->scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, &cfg->scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, &cfg->scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, &cfg->scroll_on_disp);
gppi(sesskey, "LockSize", 0, &cfg->resize_action);
gppi(sesskey, "BCE", 0, &cfg->bce);
gppi(sesskey, "BlinkText", 0, &cfg->blinktext);
gppi(sesskey, "X11Forward", 0, &cfg->x11_forward);
gpps(sesskey, "X11Display", "localhost:0", cfg->x11_display,
sizeof(cfg->x11_display));
gppi(sesskey, "LocalPortAcceptAll", 0, &cfg->lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, &cfg->rport_acceptall);
{
char buf[2 * sizeof(cfg->portfwd)], *p, *q;
gpps(sesskey, "PortForwardings", "", buf, sizeof(buf));
p = buf;
q = cfg->portfwd;
while (*p) {
while (*p && *p != ',') {
int c = *p++;
if (c == '=')
c = '\t';
if (c == '\\')
c = *p++;
*q++ = c;
}
if (*p == ',')
p++;
*q++ = '\0';
}
*q = '\0';
}
close_settings_r(sesskey);
}
void load_open_settings(void *sesskey, Config *cfg)
{
int i;
char prot[10];
cfg->ssh_subsys = 0; /* FIXME: load this properly */
cfg->remote_cmd_ptr = NULL;
cfg->remote_cmd_ptr2 = NULL;
cfg->ssh_nc_host[0] = '\0';
gpps(sesskey, "HostName", "", cfg->host, sizeof(cfg->host));
gppfile(sesskey, "LogFileName", &cfg->logfilename);
gppi(sesskey, "LogType", 0, &cfg->logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, &cfg->logxfovr);
gppi(sesskey, "LogFlush", 1, &cfg->logflush);
gppi(sesskey, "SSHLogOmitPasswords", 1, &cfg->logomitpass);
gppi(sesskey, "SSHLogOmitData", 0, &cfg->logomitdata);
gpps(sesskey, "Protocol", "default", prot, 10);
cfg->protocol = default_protocol;
cfg->port = default_port;
{
const Backend *b = backend_from_name(prot);
if (b) {
cfg->protocol = b->protocol;
gppi(sesskey, "PortNumber", default_port, &cfg->port);
}
}
/* Address family selection */
gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, &cfg->addressfamily);
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
gppi(sesskey, "CloseOnExit", 1, &i); cfg->close_on_exit = (i+1)%3;
gppi(sesskey, "WarnOnClose", 1, &cfg->warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
gppi(sesskey, "PingInterval", 0, &pingmin);
gppi(sesskey, "PingIntervalSecs", 0, &pingsec);
cfg->ping_interval = pingmin * 60 + pingsec;
}
gppi(sesskey, "TCPNoDelay", 1, &cfg->tcp_nodelay);
gppi(sesskey, "TCPKeepalives", 0, &cfg->tcp_keepalives);
gpps(sesskey, "TerminalType", "xterm", cfg->termtype,
sizeof(cfg->termtype));
gpps(sesskey, "TerminalSpeed", "38400,38400", cfg->termspeed,
sizeof(cfg->termspeed));
{
/* This hardcodes a big set of defaults in any new saved
* sessions. Let's hope we don't change our mind. */
int i;
char *def = dupstr("");
/* Default: all set to "auto" */
for (i = 0; ttymodes[i]; i++) {
char *def2 = dupprintf("%s%s=A,", def, ttymodes[i]);
sfree(def);
def = def2;
}
gppmap(sesskey, "TerminalModes", def,
cfg->ttymodes, lenof(cfg->ttymodes));
sfree(def);
}
/* proxy settings */
gpps(sesskey, "ProxyExcludeList", "", cfg->proxy_exclude_list,
sizeof(cfg->proxy_exclude_list));
gppi(sesskey, "ProxyDNS", 1, &i); cfg->proxy_dns = (i+1)%3;
gppi(sesskey, "ProxyLocalhost", 0, &cfg->even_proxy_localhost);
gppi(sesskey, "ProxyMethod", -1, &cfg->proxy_type);
if (cfg->proxy_type == -1) {
int i;
gppi(sesskey, "ProxyType", 0, &i);
if (i == 0)
cfg->proxy_type = PROXY_NONE;
else if (i == 1)
cfg->proxy_type = PROXY_HTTP;
else if (i == 3)
cfg->proxy_type = PROXY_TELNET;
else if (i == 4)
cfg->proxy_type = PROXY_CMD;
else {
gppi(sesskey, "ProxySOCKSVersion", 5, &i);
if (i == 5)
cfg->proxy_type = PROXY_SOCKS5;
else
cfg->proxy_type = PROXY_SOCKS4;
}
}
gpps(sesskey, "ProxyHost", "proxy", cfg->proxy_host,
sizeof(cfg->proxy_host));
gppi(sesskey, "ProxyPort", 80, &cfg->proxy_port);
gpps(sesskey, "ProxyUsername", "", cfg->proxy_username,
sizeof(cfg->proxy_username));
gpps(sesskey, "ProxyPassword", "", cfg->proxy_password,
sizeof(cfg->proxy_password));
gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
cfg->proxy_telnet_command, sizeof(cfg->proxy_telnet_command));
gppmap(sesskey, "Environment", "", cfg->environmt, lenof(cfg->environmt));
gpps(sesskey, "UserName", "", cfg->username, sizeof(cfg->username));
gppi(sesskey, "UserNameFromEnvironment", 0, &cfg->username_from_env);
gpps(sesskey, "LocalUserName", "", cfg->localusername,
sizeof(cfg->localusername));
gppi(sesskey, "NoPTY", 0, &cfg->nopty);
gppi(sesskey, "Compression", 0, &cfg->compression);
gppi(sesskey, "TryAgent", 1, &cfg->tryagent);
gppi(sesskey, "AgentFwd", 0, &cfg->agentfwd);
gppi(sesskey, "ChangeUsername", 0, &cfg->change_username);
gppi(sesskey, "GssapiFwd", 0, &cfg->gssapifwd);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, cfg->ssh_cipherlist);
{
/* Backward-compatibility: we used to have an option to
* disable gex under the "bugs" panel after one report of
* a server which offered it then choked, but we never got
* a server version string or any other reports. */
char *default_kexes;
gppi(sesskey, "BugDHGEx2", 0, &i); i = 2-i;
if (i == FORCE_ON)
default_kexes = "dh-group14-sha1,dh-group1-sha1,rsa,WARN,dh-gex-sha1";
else
default_kexes = "dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN";
gprefs(sesskey, "KEX", default_kexes,
kexnames, KEX_MAX, cfg->ssh_kexlist);
}
gppi(sesskey, "RekeyTime", 60, &cfg->ssh_rekey_time);
gpps(sesskey, "RekeyBytes", "1G", cfg->ssh_rekey_data,
sizeof(cfg->ssh_rekey_data));
gppi(sesskey, "SshProt", 2, &cfg->sshprot);
gpps(sesskey, "LogHost", "", cfg->loghost, sizeof(cfg->loghost));
gppi(sesskey, "SSH2DES", 0, &cfg->ssh2_des_cbc);
gppi(sesskey, "SshNoAuth", 0, &cfg->ssh_no_userauth);
gppi(sesskey, "SshBanner", 1, &cfg->ssh_show_banner);
gppi(sesskey, "AuthTIS", 0, &cfg->try_tis_auth);
gppi(sesskey, "AuthKI", 1, &cfg->try_ki_auth);
gppi(sesskey, "AuthGSSAPI", 1, &cfg->try_gssapi_auth);
#ifndef NO_GSSAPI
gprefs(sesskey, "GSSLibs", "\0",
gsslibkeywords, ngsslibs, cfg->ssh_gsslist);
gppfile(sesskey, "GSSCustom", &cfg->ssh_gss_custom);
#endif
gppi(sesskey, "SshNoShell", 0, &cfg->ssh_no_shell);
gppfile(sesskey, "PublicKeyFile", &cfg->keyfile);
gpps(sesskey, "RemoteCommand", "", cfg->remote_cmd,
sizeof(cfg->remote_cmd));
gppi(sesskey, "RFCEnviron", 0, &cfg->rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, &cfg->passive_telnet);
gppi(sesskey, "BackspaceIsDelete", 1, &cfg->bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, &cfg->rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, &cfg->funky_type);
gppi(sesskey, "NoApplicationKeys", 0, &cfg->no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, &cfg->no_applic_c);
gppi(sesskey, "NoMouseReporting", 0, &cfg->no_mouse_rep);
gppi(sesskey, "NoRemoteResize", 0, &cfg->no_remote_resize);
gppi(sesskey, "NoAltScreen", 0, &cfg->no_alt_screen);
gppi(sesskey, "NoRemoteWinTitle", 0, &cfg->no_remote_wintitle);
{
/* Backward compatibility */
int no_remote_qtitle;
gppi(sesskey, "NoRemoteQTitle", 1, &no_remote_qtitle);
/* We deliberately interpret the old setting of "no response" as
* "empty string". This changes the behaviour, but hopefully for
* the better; the user can always recover the old behaviour. */
gppi(sesskey, "RemoteQTitleAction",
no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
&cfg->remote_qtitle_action);
}
gppi(sesskey, "NoDBackspace", 0, &cfg->no_dbackspace);
gppi(sesskey, "NoRemoteCharset", 0, &cfg->no_remote_charset);
gppi(sesskey, "ApplicationCursorKeys", 0, &cfg->app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, &cfg->app_keypad);
gppi(sesskey, "NetHackKeypad", 0, &cfg->nethack_keypad);
gppi(sesskey, "AltF4", 1, &cfg->alt_f4);
gppi(sesskey, "AltSpace", 0, &cfg->alt_space);
gppi(sesskey, "AltOnly", 0, &cfg->alt_only);
gppi(sesskey, "AltMetaBit", 0, &cfg->alt_metabit);
gppi(sesskey, "CtrlTabSwitch", 0, &cfg->ctrl_tab_switch);
gppi(sesskey, "ComposeKey", 0, &cfg->compose_key);
gppi(sesskey, "CtrlAltKeys", 1, &cfg->ctrlaltkeys);
gppi(sesskey, "RightAltKey", 0, &cfg->rightaltkey);
gppi(sesskey, "TelnetKey", 0, &cfg->telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, &cfg->telnet_newline);
gppi(sesskey, "LocalEcho", AUTO, &cfg->localecho);
gppi(sesskey, "LocalEdit", AUTO, &cfg->localedit);
gpps(sesskey, "Answerback", "PuTTY", cfg->answerback,
sizeof(cfg->answerback));
gppi(sesskey, "AlwaysOnTop", 0, &cfg->alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, &cfg->fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, &cfg->hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, &cfg->sunken_edge);
gppfile(sesskey, "IconFile", &cfg->iconfile);
gppi(sesskey, "WindowBorder", 1, &cfg->window_border);
gppi(sesskey, "CurType", 0, &cfg->cursor_type);
gppi(sesskey, "BlinkCur", 0, &cfg->blink_cur);
{
int key, mod, len;
char tmp[24];
char buf[256];
int max, t;
for (key = 0; key < 256; key++) {
sprintf(tmp, "VKey%d", key);
gpps(sesskey, tmp, "", buf, sizeof(buf));
max = strlen(buf);
if (!max) {
continue;
}
t = 0;
for (mod = 0; mod < 8; mod++) {
for (len = 0; (t < max) && (buf[t] != ',') && (len < 15); len++, t++) {
if (buf[t] == '\\') {
sscanf(&buf[++t], "%03o", &cfg->pvkey_codes[key][mod][len]);
t += 2;
continue;
}
cfg->pvkey_codes[key][mod][len] = buf[t];
}
cfg->pvkey_length[key][mod] = len;
cfg->pvkey_codes[key][mod][len] = '\0';
t++;
}
}
}
/* pedantic compiler tells me I can't use &cfg->beep as an int * :-) */
gppi(sesskey, "Beep", 1, &cfg->beep);
gppi(sesskey, "BeepInd", 0, &cfg->beep_ind);
gppfile(sesskey, "BellWaveFile", &cfg->bell_wavefile);
gppi(sesskey, "BellOverload", 1, &cfg->bellovl);
gppi(sesskey, "BellOverloadN", 5, &cfg->bellovl_n);
gppi(sesskey, "BellOverloadT", 2*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_t = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "BellOverloadS", 5*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_s = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "ScrollbackLines", 200, &cfg->savelines);
gppi(sesskey, "DECOriginMode", 0, &cfg->dec_om);
gppi(sesskey, "AutoWrapMode", 1, &cfg->wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, &cfg->lfhascr);
gppi(sesskey, "CRImpliesLF", 0, &cfg->crhaslf);
gppi(sesskey, "DisableArabicShaping", 0, &cfg->arabicshaping);
gppi(sesskey, "DisableBidi", 0, &cfg->bidi);
gppi(sesskey, "WinNameAlways", 1, &cfg->win_name_always);
gpps(sesskey, "WinTitle", "", cfg->wintitle, sizeof(cfg->wintitle));
gppi(sesskey, "TermWidth", 80, &cfg->width);
gppi(sesskey, "TermHeight", 24, &cfg->height);
gppi(sesskey, "TermX", CW_USEDEFAULT, &cfg->x);
gppi(sesskey, "TermY", CW_USEDEFAULT, &cfg->y);
gppfont(sesskey, "Font", &cfg->font);
gppi(sesskey, "FontQuality", FQ_DEFAULT, &cfg->font_quality);
gppi(sesskey, "FontVTMode", VT_UNICODE, (int *) &cfg->vtmode);
gppi(sesskey, "UseSystemColours", 0, &cfg->system_colour);
gppi(sesskey, "TryPalette", 0, &cfg->try_palette);
gppi(sesskey, "ANSIColour", 1, &cfg->ansi_colour);
gppi(sesskey, "Xterm256Colour", 1, &cfg->xterm_256_colour);
gppi(sesskey, "BoldAsColour", 1, &cfg->bold_colour);
for (i = 0; i < 24; i++) {
static const char *const defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255",
"0,0,0", "255,0,0"
};
char buf[20], buf2[30];
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
cfg->colours[i][0] = c0;
cfg->colours[i][1] = c1;
cfg->colours[i][2] = c2;
}
}
gppi(sesskey, "RawCNP", 0, &cfg->rawcnp);
gppi(sesskey, "PasteRTF", 0, &cfg->rtf_paste);
gpps(sesskey, "IgnoreChars", "", cfg->ignore_chars,
sizeof(cfg->ignore_chars));
gppi(sesskey, "MouseIsXterm", 0, &cfg->mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, &cfg->rect_select);
gppi(sesskey, "MouseOverride", 1, &cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
static const char *const defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], buf2[256], *p;
int j;
sprintf(buf, "Wordness%d", i);
gpps(sesskey, buf, defaults[i / 32], buf2, sizeof(buf2));
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
cfg->wordness[j] = atoi(q);
}
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
{
char buf[32];
get_l10n_setting("_LINECODEPAGE_", buf, sizeof (buf));
gpps(sesskey, "LineCodePage", buf, cfg->line_codepage,
sizeof(cfg->line_codepage));
}
if (!strcmp (cfg->line_codepage, "UTF-8")) {
int i;
char buf[lenof (cfg->line_codepage)];
gppi (sesskey, "ISO2022", 0, &i); /* for compatibility with old patch */
if (i) {
strcpy (buf, "iso2022 ");
gpps (sesskey, "ISO2022initstr", "", &buf[8],
sizeof buf - 8 * sizeof buf[0]);
if (buf[8]) memcpy (cfg->line_codepage, buf,
sizeof cfg->line_codepage);
}
}
gppi(sesskey, "CJKAmbigWide", 0, &cfg->cjk_ambig_wide);
gppi(sesskey, "UTF8Override", 1, &cfg->utf8_override);
gpps(sesskey, "Printer", "", cfg->printer, sizeof(cfg->printer));
gppi (sesskey, "CapsLockCyr", 0, &cfg->xlat_capslockcyr);
gppi (sesskey, "Use5Casis", 0, &cfg->use_5casis);
gppi(sesskey, "ScrollBar", 1, &cfg->scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, &cfg->scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, &cfg->scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, &cfg->scroll_on_disp);
gppi(sesskey, "EraseToScrollback", 1, &cfg->erase_to_scrollback);
gppi(sesskey, "LockSize", 0, &cfg->resize_action);
gppi(sesskey, "BCE", 1, &cfg->bce);
gppi(sesskey, "BlinkText", 0, &cfg->blinktext);
gppi(sesskey, "X11Forward", 0, &cfg->x11_forward);
gpps(sesskey, "X11Display", "", cfg->x11_display,
sizeof(cfg->x11_display));
gppi(sesskey, "X11AuthType", X11_MIT, &cfg->x11_auth);
gppfile(sesskey, "X11AuthFile", &cfg->xauthfile);
gppi(sesskey, "LocalPortAcceptAll", 0, &cfg->lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, &cfg->rport_acceptall);
gppmap(sesskey, "PortForwardings", "", cfg->portfwd, lenof(cfg->portfwd));
gppi(sesskey, "BugIgnore1", 0, &i); cfg->sshbug_ignore1 = 2-i;
gppi(sesskey, "BugPlainPW1", 0, &i); cfg->sshbug_plainpw1 = 2-i;
gppi(sesskey, "BugRSA1", 0, &i); cfg->sshbug_rsa1 = 2-i;
gppi(sesskey, "BugIgnore2", 0, &i); cfg->sshbug_ignore2 = 2-i;
{
int i;
gppi(sesskey, "BugHMAC2", 0, &i); cfg->sshbug_hmac2 = 2-i;
if (cfg->sshbug_hmac2 == AUTO) {
gppi(sesskey, "BuggyMAC", 0, &i);
if (i == 1)
cfg->sshbug_hmac2 = FORCE_ON;
}
}
gppi(sesskey, "BugDeriveKey2", 0, &i); cfg->sshbug_derivekey2 = 2-i;
gppi(sesskey, "BugRSAPad2", 0, &i); cfg->sshbug_rsapad2 = 2-i;
gppi(sesskey, "BugPKSessID2", 0, &i); cfg->sshbug_pksessid2 = 2-i;
gppi(sesskey, "BugRekey2", 0, &i); cfg->sshbug_rekey2 = 2-i;
gppi(sesskey, "BugMaxPkt2", 0, &i); cfg->sshbug_maxpkt2 = 2-i;
cfg->ssh_simple = FALSE;
gppi(sesskey, "StampUtmp", 1, &cfg->stamp_utmp);
gppi(sesskey, "LoginShell", 1, &cfg->login_shell);
gppi(sesskey, "ScrollbarOnLeft", 0, &cfg->scrollbar_on_left);
gppi(sesskey, "ShadowBold", 0, &cfg->shadowbold);
gppfont(sesskey, "BoldFont", &cfg->boldfont);
gppfont(sesskey, "WideFont", &cfg->widefont);
gppfont(sesskey, "WideBoldFont", &cfg->wideboldfont);
gppi(sesskey, "ShadowBoldOffset", 1, &cfg->shadowboldoffset);
gpps(sesskey, "SerialLine", "", cfg->serline, sizeof(cfg->serline));
gppi(sesskey, "SerialSpeed", 9600, &cfg->serspeed);
gppi(sesskey, "SerialDataBits", 8, &cfg->serdatabits);
gppi(sesskey, "SerialStopHalfbits", 2, &cfg->serstopbits);
gppi(sesskey, "SerialParity", SER_PAR_NONE, &cfg->serparity);
gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, &cfg->serflow);
gpps(sesskey, "WindowClass", "", cfg->winclass, sizeof(cfg->winclass));
/* HACK: PuttyTray / Reconnect */
gppi(sesskey, "WakeupReconnect", 0, &cfg->wakeup_reconnect);
gppi(sesskey, "FailureReconnect", 0, &cfg->failure_reconnect);
/* Hyperlink */
gppi(sesskey, "HyperlinkEnable", 1, &cfg->url_enable);
gppi(sesskey, "HyperlinkUnderline", 1, &cfg->url_underline);
gppi(sesskey, "HyperlinkUseCtrlClick", 1, &cfg->url_ctrl_click);
/* Background */
gppi(sesskey, "BackgroundWallpaper", 0, &cfg->bg_wallpaper);
gppi(sesskey, "BackgroundEffect", 0, &cfg->bg_effect);
gppfile(sesskey, "WallpaperFile", &cfg->wp_file);
gppi(sesskey, "WallpaperPosition", 0, &cfg->wp_position);
gppi(sesskey, "WallpaperAlign", 0, &cfg->wp_align);
gppi(sesskey, "WallpaperVerticalAlign", 0, &cfg->wp_valign);
gppi(sesskey, "WallpaperMoving", 0, &cfg->wp_moving);
/* Transparency */
for (i = 0; i < 4; i++) {
static const char *const defaults[] = {
"100,100", "100,100", "100,100", "100,100"
};
char buf[16], buf2[16];
int c0 = 100;
int c1 = 100;
sprintf(buf, "Alpha%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d", &c0, &c1)) {
if (c0 > 100) {
c0 = 100;
}
if (c1 > 100) {
c1 = 100;
}
cfg->alphas_pc[i][0] = c0;
cfg->alphas_pc[i][1] = c1;
}
}
}
void load_open_settings(void *sesskey, int do_host, Config *cfg)
{
int i;
char prot[10];
cfg->ssh_subsys = 0; /* FIXME: load this properly */
cfg->remote_cmd_ptr = cfg->remote_cmd;
cfg->remote_cmd_ptr2 = NULL;
if (do_host) {
gpps(sesskey, "HostName", "", cfg->host, sizeof(cfg->host));
} else {
cfg->host[0] = '\0'; /* blank hostname */
}
gppfile(sesskey, "LogFileName", &cfg->logfilename);
gppi(sesskey, "LogType", 0, &cfg->logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, &cfg->logxfovr);
gpps(sesskey, "Protocol", "default", prot, 10);
cfg->protocol = default_protocol;
cfg->port = default_port;
for (i = 0; backends[i].name != NULL; i++)
if (!strcmp(prot, backends[i].name)) {
cfg->protocol = backends[i].protocol;
gppi(sesskey, "PortNumber", default_port, &cfg->port);
break;
}
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
gppi(sesskey, "CloseOnExit", 1, &i); cfg->close_on_exit = (i+1)%3;
gppi(sesskey, "WarnOnClose", 1, &cfg->warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
gppi(sesskey, "PingInterval", 0, &pingmin);
gppi(sesskey, "PingIntervalSecs", 0, &pingsec);
cfg->ping_interval = pingmin * 60 + pingsec;
}
gppi(sesskey, "TCPNoDelay", 1, &cfg->tcp_nodelay);
gpps(sesskey, "TerminalType", "xterm", cfg->termtype,
sizeof(cfg->termtype));
gpps(sesskey, "TerminalSpeed", "38400,38400", cfg->termspeed,
sizeof(cfg->termspeed));
/* proxy settings */
gpps(sesskey, "ProxyExcludeList", "", cfg->proxy_exclude_list,
sizeof(cfg->proxy_exclude_list));
gppi(sesskey, "ProxyDNS", 1, &i); cfg->proxy_dns = (i+1)%3;
gppi(sesskey, "ProxyLocalhost", 0, &cfg->even_proxy_localhost);
gppi(sesskey, "ProxyMethod", -1, &cfg->proxy_type);
if (cfg->proxy_type == -1) {
int i;
gppi(sesskey, "ProxyType", 0, &i);
if (i == 0)
cfg->proxy_type = PROXY_NONE;
else if (i == 1)
cfg->proxy_type = PROXY_HTTP;
else if (i == 3)
cfg->proxy_type = PROXY_TELNET;
else if (i == 4)
cfg->proxy_type = PROXY_CMD;
else {
gppi(sesskey, "ProxySOCKSVersion", 5, &i);
if (i == 5)
cfg->proxy_type = PROXY_SOCKS5;
else
cfg->proxy_type = PROXY_SOCKS4;
}
}
gpps(sesskey, "ProxyHost", "proxy", cfg->proxy_host,
sizeof(cfg->proxy_host));
gppi(sesskey, "ProxyPort", 80, &cfg->proxy_port);
gpps(sesskey, "ProxyUsername", "", cfg->proxy_username,
sizeof(cfg->proxy_username));
gpps(sesskey, "ProxyPassword", "", cfg->proxy_password,
sizeof(cfg->proxy_password));
gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
cfg->proxy_telnet_command, sizeof(cfg->proxy_telnet_command));
{
char buf[2 * sizeof(cfg->environmt)], *p, *q;
gpps(sesskey, "Environment", "", buf, sizeof(buf));
p = buf;
q = cfg->environmt;
while (*p) {
while (*p && *p != ',') {
int c = *p++;
if (c == '=')
c = '\t';
if (c == '\\')
c = *p++;
*q++ = c;
}
if (*p == ',')
p++;
*q++ = '\0';
}
*q = '\0';
}
gpps(sesskey, "UserName", "", cfg->username, sizeof(cfg->username));
gpps(sesskey, "LocalUserName", "", cfg->localusername,
sizeof(cfg->localusername));
gppi(sesskey, "NoPTY", 0, &cfg->nopty);
gppi(sesskey, "Compression", 0, &cfg->compression);
gppi(sesskey, "AgentFwd", 0, &cfg->agentfwd);
gppi(sesskey, "ChangeUsername", 0, &cfg->change_username);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, cfg->ssh_cipherlist);
gppi(sesskey, "SshProt", 2, &cfg->sshprot);
gppi(sesskey, "SSH2DES", 0, &cfg->ssh2_des_cbc);
gppi(sesskey, "AuthTIS", 0, &cfg->try_tis_auth);
gppi(sesskey, "AuthKI", 1, &cfg->try_ki_auth);
gppfile(sesskey, "PublicKeyFile", &cfg->keyfile);
gpps(sesskey, "RemoteCommand", "", cfg->remote_cmd,
sizeof(cfg->remote_cmd));
gppi(sesskey, "RFCEnviron", 0, &cfg->rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, &cfg->passive_telnet);
gppi(sesskey, "BackspaceIsDelete", 1, &cfg->bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, &cfg->rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, &cfg->funky_type);
gppi(sesskey, "NoApplicationKeys", 0, &cfg->no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, &cfg->no_applic_c);
gppi(sesskey, "NoMouseReporting", 0, &cfg->no_mouse_rep);
gppi(sesskey, "NoRemoteResize", 0, &cfg->no_remote_resize);
gppi(sesskey, "NoAltScreen", 0, &cfg->no_alt_screen);
gppi(sesskey, "NoRemoteWinTitle", 0, &cfg->no_remote_wintitle);
gppi(sesskey, "NoRemoteQTitle", 1, &cfg->no_remote_qtitle);
gppi(sesskey, "NoDBackspace", 0, &cfg->no_dbackspace);
gppi(sesskey, "NoRemoteCharset", 0, &cfg->no_remote_charset);
gppi(sesskey, "ApplicationCursorKeys", 0, &cfg->app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, &cfg->app_keypad);
gppi(sesskey, "NetHackKeypad", 0, &cfg->nethack_keypad);
gppi(sesskey, "AltF4", 1, &cfg->alt_f4);
gppi(sesskey, "AltSpace", 0, &cfg->alt_space);
gppi(sesskey, "AltOnly", 0, &cfg->alt_only);
gppi(sesskey, "ComposeKey", 0, &cfg->compose_key);
gppi(sesskey, "CtrlAltKeys", 1, &cfg->ctrlaltkeys);
gppi(sesskey, "TelnetKey", 0, &cfg->telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, &cfg->telnet_newline);
gppi(sesskey, "LocalEcho", AUTO, &cfg->localecho);
gppi(sesskey, "LocalEdit", AUTO, &cfg->localedit);
gpps(sesskey, "Answerback", "PuTTY", cfg->answerback,
sizeof(cfg->answerback));
gppi(sesskey, "AlwaysOnTop", 0, &cfg->alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, &cfg->fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, &cfg->hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, &cfg->sunken_edge);
gppi(sesskey, "WindowBorder", 1, &cfg->window_border);
gppi(sesskey, "CurType", 0, &cfg->cursor_type);
gppi(sesskey, "BlinkCur", 0, &cfg->blink_cur);
/* pedantic compiler tells me I can't use &cfg->beep as an int * :-) */
gppi(sesskey, "Beep", 1, &cfg->beep);
gppi(sesskey, "BeepInd", 0, &cfg->beep_ind);
gppfile(sesskey, "BellWaveFile", &cfg->bell_wavefile);
gppi(sesskey, "BellOverload", 1, &cfg->bellovl);
gppi(sesskey, "BellOverloadN", 5, &cfg->bellovl_n);
gppi(sesskey, "BellOverloadT", 2*TICKSPERSEC, &cfg->bellovl_t);
gppi(sesskey, "BellOverloadS", 5*TICKSPERSEC, &cfg->bellovl_s);
gppi(sesskey, "ScrollbackLines", 200, &cfg->savelines);
gppi(sesskey, "DECOriginMode", 0, &cfg->dec_om);
gppi(sesskey, "AutoWrapMode", 1, &cfg->wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, &cfg->lfhascr);
gppi(sesskey, "WinNameAlways", 1, &cfg->win_name_always);
gpps(sesskey, "WinTitle", "", cfg->wintitle, sizeof(cfg->wintitle));
gppi(sesskey, "TermWidth", 80, &cfg->width);
gppi(sesskey, "TermHeight", 24, &cfg->height);
gppfont(sesskey, "Font", &cfg->font);
gppi(sesskey, "FontVTMode", VT_UNICODE, (int *) &cfg->vtmode);
gppi(sesskey, "UseSystemColours", 0, &cfg->system_colour);
gppi(sesskey, "TryPalette", 0, &cfg->try_palette);
gppi(sesskey, "BoldAsColour", 1, &cfg->bold_colour);
for (i = 0; i < 22; i++) {
static const char *const defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255"
};
char buf[20], buf2[30];
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
cfg->colours[i][0] = c0;
cfg->colours[i][1] = c1;
cfg->colours[i][2] = c2;
}
}
gppi(sesskey, "RawCNP", 0, &cfg->rawcnp);
gppi(sesskey, "PasteRTF", 0, &cfg->rtf_paste);
gppi(sesskey, "MouseIsXterm", 0, &cfg->mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, &cfg->rect_select);
gppi(sesskey, "MouseOverride", 1, &cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
static const char *const defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], buf2[256], *p;
int j;
sprintf(buf, "Wordness%d", i);
gpps(sesskey, buf, defaults[i / 32], buf2, sizeof(buf2));
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
cfg->wordness[j] = atoi(q);
}
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
gpps(sesskey, "LineCodePage", "", cfg->line_codepage,
sizeof(cfg->line_codepage));
gpps(sesskey, "Printer", "", cfg->printer, sizeof(cfg->printer));
gppi (sesskey, "CapsLockCyr", 0, &cfg->xlat_capslockcyr);
gppi(sesskey, "ScrollBar", 1, &cfg->scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, &cfg->scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, &cfg->scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, &cfg->scroll_on_disp);
gppi(sesskey, "EraseToScrollback", 1, &cfg->erase_to_scrollback);
gppi(sesskey, "LockSize", 0, &cfg->resize_action);
gppi(sesskey, "BCE", 1, &cfg->bce);
gppi(sesskey, "BlinkText", 0, &cfg->blinktext);
gppi(sesskey, "X11Forward", 0, &cfg->x11_forward);
gpps(sesskey, "X11Display", "localhost:0", cfg->x11_display,
sizeof(cfg->x11_display));
gppi(sesskey, "X11AuthType", X11_MIT, &cfg->x11_auth);
gppi(sesskey, "LocalPortAcceptAll", 0, &cfg->lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, &cfg->rport_acceptall);
{
char buf[2 * sizeof(cfg->portfwd)], *p, *q;
gpps(sesskey, "PortForwardings", "", buf, sizeof(buf));
p = buf;
q = cfg->portfwd;
while (*p) {
while (*p && *p != ',') {
int c = *p++;
if (c == '=')
c = '\t';
if (c == '\\')
c = *p++;
*q++ = c;
}
if (*p == ',')
p++;
*q++ = '\0';
}
*q = '\0';
}
gppi(sesskey, "BugIgnore1", 0, &i); cfg->sshbug_ignore1 = 2-i;
gppi(sesskey, "BugPlainPW1", 0, &i); cfg->sshbug_plainpw1 = 2-i;
gppi(sesskey, "BugRSA1", 0, &i); cfg->sshbug_rsa1 = 2-i;
{
int i;
gppi(sesskey, "BugHMAC2", 0, &i); cfg->sshbug_hmac2 = 2-i;
if (cfg->sshbug_hmac2 == AUTO) {
gppi(sesskey, "BuggyMAC", 0, &i);
if (i == 1)
cfg->sshbug_hmac2 = FORCE_ON;
}
}
gppi(sesskey, "BugDeriveKey2", 0, &i); cfg->sshbug_derivekey2 = 2-i;
gppi(sesskey, "BugRSAPad2", 0, &i); cfg->sshbug_rsapad2 = 2-i;
gppi(sesskey, "BugDHGEx2", 0, &i); cfg->sshbug_dhgex2 = 2-i;
gppi(sesskey, "BugPKSessID2", 0, &i); cfg->sshbug_pksessid2 = 2-i;
gppi(sesskey, "StampUtmp", 1, &cfg->stamp_utmp);
gppi(sesskey, "LoginShell", 1, &cfg->login_shell);
gppi(sesskey, "ScrollbarOnLeft", 0, &cfg->scrollbar_on_left);
gppi(sesskey, "ShadowBold", 0, &cfg->shadowbold);
gppfont(sesskey, "BoldFont", &cfg->boldfont);
gppfont(sesskey, "WideFont", &cfg->widefont);
gppfont(sesskey, "WideBoldFont", &cfg->wideboldfont);
gppi(sesskey, "ShadowBoldOffset", 1, &cfg->shadowboldoffset);
}
void perhapsDoAction()
{
FILE *fout;
char buf[2*MAXOPT_DEVELOP];
int ret = 0;
if(opt_develop.arg_action[0]=='\0') return;
if(opt_develop.arg_project[0]=='\0')
{
printf("no project given\n");
usage();
}
if(strcmp(opt_develop.arg_action,"writeInitialProject") == 0)
{
generateInitialProject(opt_develop.arg_project);
sprintf(buf,"qmake=%s",opt_develop.arg_project);
action(buf);
}
else if(strcmp(opt_develop.arg_action,"insertMask") == 0)
{
sprintf(buf,"insertMask=%s",opt_develop.arg_project);
action(buf);
}
else if(strcmp(opt_develop.arg_action,"make") == 0)
{
action("make");
}
else if(strcmp(opt_develop.arg_action,"makeModbus") == 0)
{
gmodbus("modbusdaemon.mkmodbus");
#ifdef PVUNIX
ret = system("g++ -c modbusdaemon.cpp -o modbusdaemon.o -I/opt/pvb/rllib/lib ; g++ modbusdaemon.o /usr/lib/librllib.so -lpthread -o modbusdaemon");
#else
ret = system("start pvb_make_modbusdaemon.bat");
#endif
}
else if(strcmp(opt_develop.arg_action,"makeSiemensTCP") == 0)
{
gsiemens("siemensdaemon.mksiemens");
#ifdef PVUNIX
ret = system("g++ -c siemensdaemon.cpp -o siemensdaemon.o -I/opt/pvb/rllib/lib ; g++ siemensdaemon.o /usr/lib/librllib.so -lpthread -o siemensdaemon");
#else
ret = system("start pvb_make_siemensdaemon.bat");
#endif
}
else if(strcmp(opt_develop.arg_action,"makePPI") == 0)
{
gppi("ppidaemon.mkppi");
#ifdef PVUNIX
ret = system("g++ -c ppidaemon.cpp -o ppidaemon.o -I/opt/pvb/rllib/lib ; g++ ppidaemon.o /opt/pvb/rllib/lib/nodave.o /opt/pvb/rllib/lib/setport.o /usr/lib/librllib.so -lpthread -o ppidaemon");
#else
ret = system("start pvb_make_ppidaemon.bat");
#endif
}
else if(strcmp(opt_develop.arg_action,"uncommentRLLIB") == 0)
{
sprintf(buf,"%s.pro",opt_develop.arg_project);
uncommentRllib(buf);
}
else if(strcmp(opt_develop.arg_action,"uncommentModbus") == 0)
{
uncommentModbus();
}
else if(strcmp(opt_develop.arg_action,"uncommentSiemensTCP") == 0)
{
uncommentSiemenstcp();
}
else if(strcmp(opt_develop.arg_action,"uncommentPPI") == 0)
{
uncommentPpi();
}
else if(strcmp(opt_develop.arg_action,"writeStartscript") == 0)
{
ret = writeStartscript(".", opt_develop.arg_project);
}
else if(strncmp(opt_develop.arg_action,"writeDimension:",15) == 0)
{
int xmax, ymax;
xmax = 1280;
ymax = 1024;
sscanf(opt_develop.arg_action,"writeDimension:%d:%d",&xmax,&ymax);
sprintf(buf,"%s.pvproject",opt_develop.arg_project);
fout = fopen(buf,"w");
if(fout == NULL)
{
printf("could not write %s\n",buf);
exit(-1);
}
fprintf(fout,"target=%s\n",opt_develop.arg_project);
fprintf(fout,"xmax=%d\n",xmax);
fprintf(fout,"ymax=%d\n",ymax);
// add additional language here
if(opt_develop.script == PV_PYTHON)
{
fprintf(fout,"script=Python\n");
}
if(opt_develop.script == PV_PERL)
{
fprintf(fout,"script=PERL\n");
}
if(opt_develop.script == PV_PHP)
{
fprintf(fout,"script=PHP\n");
}
if(opt_develop.script == PV_TCL)
{
fprintf(fout,"script=Tcl\n");
}
if(opt_develop.script == PV_LUA)
{
fprintf(fout,"script=Lua\n");
}
fclose(fout);
}
else if(strncmp(opt_develop.arg_action,"importUi:",9) == 0)
{
if(strncmp(opt_develop.arg_action,"importUi:mask",13) == 0)
{
sscanf(opt_develop.arg_action,"importUi:mask%d", &opt_develop.arg_mask_to_generate);
}
else
{
const char *cptr = &opt_develop.arg_action[9];
if(isdigit(*cptr))
{
sscanf(cptr,"%d",&opt_develop.arg_mask_to_generate);
}
else
{
cptr = strstr(cptr,"mask");
if(cptr != NULL)
{
sscanf(cptr,"mask%d",&opt_develop.arg_mask_to_generate);
}
}
}
if(opt_develop.arg_mask_to_generate > 0)
{
char maskname[80];
sprintf(maskname,"mask%d", opt_develop.arg_mask_to_generate);
Designer *designer = new Designer(maskname);
sprintf(maskname,"mask%d.ui", opt_develop.arg_mask_to_generate);
importUi(maskname, designer);
delete designer;
#ifdef PVUNIX
action("make");
#endif
}
else printf("error: arg_mask_to_generate <= 0\n");
}
else if(strncmp(opt_develop.arg_action,"exportUi:",9) == 0)
{
if(strncmp(opt_develop.arg_action,"exportUi:mask",13) == 0)
{
sscanf(opt_develop.arg_action,"exportUi:mask%d", &opt_develop.arg_mask_to_generate);
}
else
{
const char *cptr = &opt_develop.arg_action[9];
if(isdigit(*cptr))
{
sscanf(cptr,"%d",&opt_develop.arg_mask_to_generate);
}
else
{
cptr = strstr(cptr,"mask");
if(cptr != NULL)
{
sscanf(cptr,"mask%d",&opt_develop.arg_mask_to_generate);
}
}
}
if(opt_develop.arg_mask_to_generate > 0)
{
printf("ATTENTION: You are not allowed to export an ui file, define a layout management in Qt Designer and import the ui file again to pvdevelop\n");
printf(" You must define a possible layout management within pvdevelop instead.\n");
export_ui(opt_develop.arg_mask_to_generate);
}
else printf("error: arg_mask_to_generate <= 0\n");
}
else if(strncmp(opt_develop.arg_action,"designerUi:",11) == 0)
{
if(strncmp(opt_develop.arg_action,"designerUi:mask",15) == 0)
{
sscanf(opt_develop.arg_action,"designerUi:mask%d", &opt_develop.arg_mask_to_generate);
}
else
{
const char *cptr = &opt_develop.arg_action[11];
if(isdigit(*cptr))
{
sscanf(cptr,"%d",&opt_develop.arg_mask_to_generate);
}
else
{
cptr = strstr(cptr,"mask");
if(cptr != NULL)
{
sscanf(cptr,"mask%d",&opt_develop.arg_mask_to_generate);
}
}
}
if(opt_develop.arg_mask_to_generate > 0)
{
char maskname[80];
sprintf(maskname,"mask%d", opt_develop.arg_mask_to_generate);
Designer *designer = new Designer(maskname);
sprintf(maskname,"mask%d.ui", opt_develop.arg_mask_to_generate);
printf("ATTENTION: You are not allowed to export an ui file, define a layout management in Qt Designer and import the ui file again to pvdevelop\n");
printf(" You must define a possible layout management within pvdevelop instead.\n");
export_ui(opt_develop.arg_mask_to_generate);
char cmd[1024];
#ifdef PVWIN32
sprintf(cmd,"wait \"%%QTDIR%%\\bin\\designer.exe\" %s", maskname);
mysystem(cmd);
#else
sprintf(cmd,"designer %s", maskname);
system(cmd);
#endif
importUi(maskname, designer);
delete designer;
#ifdef PVUNIX
action("make");
#endif
printf("ATTENTION: You are not allowed to export an ui file, define a layout management in Qt Designer and import the ui file again to pvdevelop\n");
printf(" You must define a possible layout management within pvdevelop instead.\n");
}
else printf("error: arg_mask_to_generate <= 0\n");
}
else if(strcmp(opt_develop.arg_action,"dumpTranslations") == 0)
{
action("dumpTranslations");
}
else
{
printf("unknown action\n");
usage();
}
if(ret != 0)
{
printf("error\n");
}
exit(0);
}
void load_open_settings(void *sesskey, Conf *conf)
{
int i;
char *prot;
conf_set_int(conf, CONF_ssh_subsys, 0); /* FIXME: load this properly */
conf_set_str(conf, CONF_remote_cmd, "");
conf_set_str(conf, CONF_remote_cmd2, "");
conf_set_str(conf, CONF_ssh_nc_host, "");
gpps(sesskey, "HostName", "", conf, CONF_host);
gppfile(sesskey, "LogFileName", conf, CONF_logfilename);
gppi(sesskey, "LogType", 0, conf, CONF_logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, conf, CONF_logxfovr);
gppi(sesskey, "LogFlush", 1, conf, CONF_logflush);
gppi(sesskey, "SSHLogOmitPasswords", 1, conf, CONF_logomitpass);
gppi(sesskey, "SSHLogOmitData", 0, conf, CONF_logomitdata);
prot = gpps_raw(sesskey, "Protocol", "default");
conf_set_int(conf, CONF_protocol, default_protocol);
conf_set_int(conf, CONF_port, default_port);
{
const Backend *b = backend_from_name(prot);
if (b) {
conf_set_int(conf, CONF_protocol, b->protocol);
gppi(sesskey, "PortNumber", default_port, conf, CONF_port);
}
}
sfree(prot);
/* Address family selection */
gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, conf, CONF_addressfamily);
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
i = gppi_raw(sesskey, "CloseOnExit", 1); conf_set_int(conf, CONF_close_on_exit, (i+1)%3);
gppi(sesskey, "WarnOnClose", 1, conf, CONF_warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
pingmin = gppi_raw(sesskey, "PingInterval", 0);
pingsec = gppi_raw(sesskey, "PingIntervalSecs", 0);
conf_set_int(conf, CONF_ping_interval, pingmin * 60 + pingsec);
}
gppi(sesskey, "TCPNoDelay", 1, conf, CONF_tcp_nodelay);
gppi(sesskey, "TCPKeepalives", 0, conf, CONF_tcp_keepalives);
gpps(sesskey, "TerminalType", "xterm", conf, CONF_termtype);
gpps(sesskey, "TerminalSpeed", "38400,38400", conf, CONF_termspeed);
if (!gppmap(sesskey, "TerminalModes", conf, CONF_ttymodes)) {
/* This hardcodes a big set of defaults in any new saved
* sessions. Let's hope we don't change our mind. */
for (i = 0; ttymodes[i]; i++)
conf_set_str_str(conf, CONF_ttymodes, ttymodes[i], "A");
}
/* proxy settings */
gpps(sesskey, "ProxyExcludeList", "", conf, CONF_proxy_exclude_list);
i = gppi_raw(sesskey, "ProxyDNS", 1); conf_set_int(conf, CONF_proxy_dns, (i+1)%3);
gppi(sesskey, "ProxyLocalhost", 0, conf, CONF_even_proxy_localhost);
gppi(sesskey, "ProxyMethod", -1, conf, CONF_proxy_type);
if (conf_get_int(conf, CONF_proxy_type) == -1) {
int i;
i = gppi_raw(sesskey, "ProxyType", 0);
if (i == 0)
conf_set_int(conf, CONF_proxy_type, PROXY_NONE);
else if (i == 1)
conf_set_int(conf, CONF_proxy_type, PROXY_HTTP);
else if (i == 3)
conf_set_int(conf, CONF_proxy_type, PROXY_TELNET);
else if (i == 4)
conf_set_int(conf, CONF_proxy_type, PROXY_CMD);
else {
i = gppi_raw(sesskey, "ProxySOCKSVersion", 5);
if (i == 5)
conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS5);
else
conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS4);
}
}
gpps(sesskey, "ProxyHost", "proxy", conf, CONF_proxy_host);
gppi(sesskey, "ProxyPort", 80, conf, CONF_proxy_port);
gpps(sesskey, "ProxyUsername", "", conf, CONF_proxy_username);
gpps(sesskey, "ProxyPassword", "", conf, CONF_proxy_password);
gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
conf, CONF_proxy_telnet_command);
gppmap(sesskey, "Environment", conf, CONF_environmt);
gpps(sesskey, "UserName", "", conf, CONF_username);
gppi(sesskey, "UserNameFromEnvironment", 0, conf, CONF_username_from_env);
gpps(sesskey, "LocalUserName", "", conf, CONF_localusername);
gppi(sesskey, "NoPTY", 0, conf, CONF_nopty);
gppi(sesskey, "Compression", 0, conf, CONF_compression);
gppi(sesskey, "TryAgent", 1, conf, CONF_tryagent);
gppi(sesskey, "AgentFwd", 0, conf, CONF_agentfwd);
gppi(sesskey, "ChangeUsername", 0, conf, CONF_change_username);
gppi(sesskey, "GssapiFwd", 0, conf, CONF_gssapifwd);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
{
/* Backward-compatibility: we used to have an option to
* disable gex under the "bugs" panel after one report of
* a server which offered it then choked, but we never got
* a server version string or any other reports. */
char *default_kexes;
i = 2 - gppi_raw(sesskey, "BugDHGEx2", 0);
if (i == FORCE_ON)
default_kexes = "dh-group14-sha1,dh-group1-sha1,rsa,WARN,dh-gex-sha1";
else
default_kexes = "dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN";
gprefs(sesskey, "KEX", default_kexes,
kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
}
gppi(sesskey, "RekeyTime", 60, conf, CONF_ssh_rekey_time);
gpps(sesskey, "RekeyBytes", "1G", conf, CONF_ssh_rekey_data);
/* SSH-2 only by default */
gppi(sesskey, "SshProt", 3, conf, CONF_sshprot);
gpps(sesskey, "LogHost", "", conf, CONF_loghost);
gppi(sesskey, "SSH2DES", 0, conf, CONF_ssh2_des_cbc);
gppi(sesskey, "SshNoAuth", 0, conf, CONF_ssh_no_userauth);
gppi(sesskey, "SshBanner", 1, conf, CONF_ssh_show_banner);
gppi(sesskey, "AuthTIS", 0, conf, CONF_try_tis_auth);
gppi(sesskey, "AuthKI", 1, conf, CONF_try_ki_auth);
gppi(sesskey, "AuthGSSAPI", 1, conf, CONF_try_gssapi_auth);
#ifndef NO_GSSAPI
gprefs(sesskey, "GSSLibs", "\0",
gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
gppfile(sesskey, "GSSCustom", conf, CONF_ssh_gss_custom);
#endif
gppi(sesskey, "SshNoShell", 0, conf, CONF_ssh_no_shell);
gppfile(sesskey, "PublicKeyFile", conf, CONF_keyfile);
gpps(sesskey, "RemoteCommand", "", conf, CONF_remote_cmd);
gppi(sesskey, "RFCEnviron", 0, conf, CONF_rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, conf, CONF_passive_telnet);
/* PuTTY CAPI start */
#ifdef _WINDOWS
gppi(sesskey, "AuthCAPI", 0, conf, CONF_try_capi_auth);
gpps(sesskey, "CAPICertID", "", conf, CONF_capi_certID);
#endif
/* PuTTY CAPI end */
gppi(sesskey, "BackspaceIsDelete", 1, conf, CONF_bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, conf, CONF_rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, conf, CONF_funky_type);
gppi(sesskey, "NoApplicationKeys", 0, conf, CONF_no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, conf, CONF_no_applic_c);
gppi(sesskey, "NoMouseReporting", 0, conf, CONF_no_mouse_rep);
gppi(sesskey, "NoRemoteResize", 0, conf, CONF_no_remote_resize);
gppi(sesskey, "NoAltScreen", 0, conf, CONF_no_alt_screen);
gppi(sesskey, "NoRemoteWinTitle", 0, conf, CONF_no_remote_wintitle);
{
/* Backward compatibility */
int no_remote_qtitle = gppi_raw(sesskey, "NoRemoteQTitle", 1);
/* We deliberately interpret the old setting of "no response" as
* "empty string". This changes the behaviour, but hopefully for
* the better; the user can always recover the old behaviour. */
gppi(sesskey, "RemoteQTitleAction",
no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
conf, CONF_remote_qtitle_action);
}
gppi(sesskey, "NoDBackspace", 0, conf, CONF_no_dbackspace);
gppi(sesskey, "NoRemoteCharset", 0, conf, CONF_no_remote_charset);
gppi(sesskey, "ApplicationCursorKeys", 0, conf, CONF_app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, conf, CONF_app_keypad);
gppi(sesskey, "NetHackKeypad", 0, conf, CONF_nethack_keypad);
gppi(sesskey, "AltF4", 1, conf, CONF_alt_f4);
gppi(sesskey, "AltSpace", 0, conf, CONF_alt_space);
gppi(sesskey, "AltOnly", 0, conf, CONF_alt_only);
gppi(sesskey, "ComposeKey", 0, conf, CONF_compose_key);
gppi(sesskey, "CtrlAltKeys", 1, conf, CONF_ctrlaltkeys);
gppi(sesskey, "TelnetKey", 0, conf, CONF_telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, conf, CONF_telnet_newline);
gppi(sesskey, "LocalEcho", AUTO, conf, CONF_localecho);
gppi(sesskey, "LocalEdit", AUTO, conf, CONF_localedit);
gpps(sesskey, "Answerback", "PuTTY", conf, CONF_answerback);
gppi(sesskey, "AlwaysOnTop", 0, conf, CONF_alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, conf, CONF_fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, conf, CONF_hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, conf, CONF_sunken_edge);
gppi(sesskey, "WindowBorder", 1, conf, CONF_window_border);
gppi(sesskey, "CurType", 0, conf, CONF_cursor_type);
gppi(sesskey, "BlinkCur", 0, conf, CONF_blink_cur);
/* pedantic compiler tells me I can't use conf, CONF_beep as an int * :-) */
gppi(sesskey, "Beep", 1, conf, CONF_beep);
gppi(sesskey, "BeepInd", 0, conf, CONF_beep_ind);
gppfile(sesskey, "BellWaveFile", conf, CONF_bell_wavefile);
gppi(sesskey, "BellOverload", 1, conf, CONF_bellovl);
gppi(sesskey, "BellOverloadN", 5, conf, CONF_bellovl_n);
i = gppi_raw(sesskey, "BellOverloadT", 2*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
);
conf_set_int(conf, CONF_bellovl_t, i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
);
i = gppi_raw(sesskey, "BellOverloadS", 5*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
);
conf_set_int(conf, CONF_bellovl_s, i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
);
gppi(sesskey, "ScrollbackLines", 2000, conf, CONF_savelines);
gppi(sesskey, "DECOriginMode", 0, conf, CONF_dec_om);
gppi(sesskey, "AutoWrapMode", 1, conf, CONF_wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, conf, CONF_lfhascr);
gppi(sesskey, "CRImpliesLF", 0, conf, CONF_crhaslf);
gppi(sesskey, "DisableArabicShaping", 0, conf, CONF_arabicshaping);
gppi(sesskey, "DisableBidi", 0, conf, CONF_bidi);
gppi(sesskey, "WinNameAlways", 1, conf, CONF_win_name_always);
gpps(sesskey, "WinTitle", "", conf, CONF_wintitle);
gppi(sesskey, "TermWidth", 80, conf, CONF_width);
gppi(sesskey, "TermHeight", 24, conf, CONF_height);
gppfont(sesskey, "Font", conf, CONF_font);
gppi(sesskey, "FontQuality", FQ_DEFAULT, conf, CONF_font_quality);
gppi(sesskey, "FontVTMode", VT_UNICODE, conf, CONF_vtmode);
gppi(sesskey, "UseSystemColours", 0, conf, CONF_system_colour);
gppi(sesskey, "TryPalette", 0, conf, CONF_try_palette);
gppi(sesskey, "ANSIColour", 1, conf, CONF_ansi_colour);
gppi(sesskey, "Xterm256Colour", 1, conf, CONF_xterm_256_colour);
i = gppi_raw(sesskey, "BoldAsColour", 1); conf_set_int(conf, CONF_bold_style, i+1);
for (i = 0; i < 22; i++) {
static const char *const defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255"
};
char buf[20], *buf2;
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
buf2 = gpps_raw(sesskey, buf, defaults[i]);
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
conf_set_int_int(conf, CONF_colours, i*3+0, c0);
conf_set_int_int(conf, CONF_colours, i*3+1, c1);
conf_set_int_int(conf, CONF_colours, i*3+2, c2);
}
sfree(buf2);
}
gppi(sesskey, "RawCNP", 0, conf, CONF_rawcnp);
gppi(sesskey, "PasteRTF", 0, conf, CONF_rtf_paste);
gppi(sesskey, "MouseIsXterm", 0, conf, CONF_mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, conf, CONF_rect_select);
gppi(sesskey, "MouseOverride", 1, conf, CONF_mouse_override);
for (i = 0; i < 256; i += 32) {
static const char *const defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], *buf2, *p;
int j;
sprintf(buf, "Wordness%d", i);
buf2 = gpps_raw(sesskey, buf, defaults[i / 32]);
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
conf_set_int_int(conf, CONF_wordness, j, atoi(q));
}
sfree(buf2);
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
gpps(sesskey, "LineCodePage", "", conf, CONF_line_codepage);
gppi(sesskey, "CJKAmbigWide", 0, conf, CONF_cjk_ambig_wide);
gppi(sesskey, "UTF8Override", 1, conf, CONF_utf8_override);
gpps(sesskey, "Printer", "", conf, CONF_printer);
gppi(sesskey, "CapsLockCyr", 0, conf, CONF_xlat_capslockcyr);
gppi(sesskey, "ScrollBar", 1, conf, CONF_scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, conf, CONF_scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, conf, CONF_scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, conf, CONF_scroll_on_disp);
gppi(sesskey, "EraseToScrollback", 1, conf, CONF_erase_to_scrollback);
gppi(sesskey, "LockSize", 0, conf, CONF_resize_action);
gppi(sesskey, "BCE", 1, conf, CONF_bce);
gppi(sesskey, "BlinkText", 0, conf, CONF_blinktext);
gppi(sesskey, "X11Forward", 0, conf, CONF_x11_forward);
gpps(sesskey, "X11Display", "", conf, CONF_x11_display);
gppi(sesskey, "X11AuthType", X11_MIT, conf, CONF_x11_auth);
gppfile(sesskey, "X11AuthFile", conf, CONF_xauthfile);
gppi(sesskey, "LocalPortAcceptAll", 0, conf, CONF_lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, conf, CONF_rport_acceptall);
gppmap(sesskey, "PortForwardings", conf, CONF_portfwd);
i = gppi_raw(sesskey, "BugIgnore1", 0); conf_set_int(conf, CONF_sshbug_ignore1, 2-i);
i = gppi_raw(sesskey, "BugPlainPW1", 0); conf_set_int(conf, CONF_sshbug_plainpw1, 2-i);
i = gppi_raw(sesskey, "BugRSA1", 0); conf_set_int(conf, CONF_sshbug_rsa1, 2-i);
i = gppi_raw(sesskey, "BugIgnore2", 0); conf_set_int(conf, CONF_sshbug_ignore2, 2-i);
{
int i;
i = gppi_raw(sesskey, "BugHMAC2", 0); conf_set_int(conf, CONF_sshbug_hmac2, 2-i);
if (2-i == AUTO) {
i = gppi_raw(sesskey, "BuggyMAC", 0);
if (i == 1)
conf_set_int(conf, CONF_sshbug_hmac2, FORCE_ON);
}
}
i = gppi_raw(sesskey, "BugDeriveKey2", 0); conf_set_int(conf, CONF_sshbug_derivekey2, 2-i);
i = gppi_raw(sesskey, "BugRSAPad2", 0); conf_set_int(conf, CONF_sshbug_rsapad2, 2-i);
i = gppi_raw(sesskey, "BugPKSessID2", 0); conf_set_int(conf, CONF_sshbug_pksessid2, 2-i);
i = gppi_raw(sesskey, "BugRekey2", 0); conf_set_int(conf, CONF_sshbug_rekey2, 2-i);
i = gppi_raw(sesskey, "BugMaxPkt2", 0); conf_set_int(conf, CONF_sshbug_maxpkt2, 2-i);
i = gppi_raw(sesskey, "BugOldGex2", 0); conf_set_int(conf, CONF_sshbug_oldgex2, 2-i);
i = gppi_raw(sesskey, "BugWinadj", 0); conf_set_int(conf, CONF_sshbug_winadj, 2-i);
i = gppi_raw(sesskey, "BugChanReq", 0); conf_set_int(conf, CONF_sshbug_chanreq, 2-i);
conf_set_int(conf, CONF_ssh_simple, FALSE);
gppi(sesskey, "StampUtmp", 1, conf, CONF_stamp_utmp);
gppi(sesskey, "LoginShell", 1, conf, CONF_login_shell);
gppi(sesskey, "ScrollbarOnLeft", 0, conf, CONF_scrollbar_on_left);
gppi(sesskey, "ShadowBold", 0, conf, CONF_shadowbold);
gppfont(sesskey, "BoldFont", conf, CONF_boldfont);
gppfont(sesskey, "WideFont", conf, CONF_widefont);
gppfont(sesskey, "WideBoldFont", conf, CONF_wideboldfont);
gppi(sesskey, "ShadowBoldOffset", 1, conf, CONF_shadowboldoffset);
gpps(sesskey, "SerialLine", "", conf, CONF_serline);
gppi(sesskey, "SerialSpeed", 9600, conf, CONF_serspeed);
gppi(sesskey, "SerialDataBits", 8, conf, CONF_serdatabits);
gppi(sesskey, "SerialStopHalfbits", 2, conf, CONF_serstopbits);
gppi(sesskey, "SerialParity", SER_PAR_NONE, conf, CONF_serparity);
gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, conf, CONF_serflow);
gpps(sesskey, "WindowClass", "", conf, CONF_winclass);
gppi(sesskey, "ConnectionSharing", 0, conf, CONF_ssh_connection_sharing);
gppi(sesskey, "ConnectionSharingUpstream", 1, conf, CONF_ssh_connection_sharing_upstream);
gppi(sesskey, "ConnectionSharingDownstream", 1, conf, CONF_ssh_connection_sharing_downstream);
gppmap(sesskey, "SSHManualHostKeys", conf, CONF_ssh_manual_hostkeys);
}
void load_open_settings(void *sesskey, Config *cfg)
{
int i;
char prot[10];
cfg->ssh_subsys = 0; /* FIXME: load this properly */
cfg->remote_cmd_ptr = NULL;
cfg->remote_cmd_ptr2 = NULL;
cfg->ssh_nc_host[0] = '\0';
gpps(sesskey, "HostName", "", cfg->host, sizeof(cfg->host));
gppfile(sesskey, "LogFileName", &cfg->logfilename);
gppi(sesskey, "LogType", 0, &cfg->logtype);
gppi(sesskey, "LogFileClash", LGXF_ASK, &cfg->logxfovr);
gppi(sesskey, "LogFlush", 1, &cfg->logflush);
gppi(sesskey, "SSHLogOmitPasswords", 1, &cfg->logomitpass);
gppi(sesskey, "SSHLogOmitData", 0, &cfg->logomitdata);
gpps(sesskey, "Protocol", "default", prot, 10);
cfg->protocol = default_protocol;
cfg->port = default_port;
{
const Backend *b = backend_from_name(prot);
if (b) {
cfg->protocol = b->protocol;
gppi(sesskey, "PortNumber", default_port, &cfg->port);
}
}
/* Address family selection */
gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, &cfg->addressfamily);
/* The CloseOnExit numbers are arranged in a different order from
* the standard FORCE_ON / FORCE_OFF / AUTO. */
gppi(sesskey, "CloseOnExit", 1, &i); cfg->close_on_exit = (i+1)%3;
gppi(sesskey, "WarnOnClose", 1, &cfg->warn_on_close);
{
/* This is two values for backward compatibility with 0.50/0.51 */
int pingmin, pingsec;
gppi(sesskey, "PingInterval", 0, &pingmin);
gppi(sesskey, "PingIntervalSecs", 0, &pingsec);
cfg->ping_interval = pingmin * 60 + pingsec;
}
gppi(sesskey, "TCPNoDelay", 1, &cfg->tcp_nodelay);
gppi(sesskey, "TCPKeepalives", 0, &cfg->tcp_keepalives);
gpps(sesskey, "TerminalType", "xterm", cfg->termtype,
sizeof(cfg->termtype));
gpps(sesskey, "TerminalSpeed", "38400,38400", cfg->termspeed,
sizeof(cfg->termspeed));
{
/* This hardcodes a big set of defaults in any new saved
* sessions. Let's hope we don't change our mind. */
int i;
char *def = dupstr("");
/* Default: all set to "auto" */
for (i = 0; ttymodes[i]; i++) {
char *def2 = dupprintf("%s%s=A,", def, ttymodes[i]);
sfree(def);
def = def2;
}
gppmap(sesskey, "TerminalModes", def,
cfg->ttymodes, lenof(cfg->ttymodes));
sfree(def);
}
/* proxy settings */
gpps(sesskey, "ProxyExcludeList", "", cfg->proxy_exclude_list,
sizeof(cfg->proxy_exclude_list));
gppi(sesskey, "ProxyDNS", 1, &i); cfg->proxy_dns = (i+1)%3;
gppi(sesskey, "ProxyLocalhost", 0, &cfg->even_proxy_localhost);
gppi(sesskey, "ProxyMethod", -1, &cfg->proxy_type);
if (cfg->proxy_type == -1) {
int i;
gppi(sesskey, "ProxyType", 0, &i);
if (i == 0)
cfg->proxy_type = PROXY_NONE;
else if (i == 1)
cfg->proxy_type = PROXY_HTTP;
else if (i == 3)
cfg->proxy_type = PROXY_TELNET;
else if (i == 4)
cfg->proxy_type = PROXY_CMD;
else {
gppi(sesskey, "ProxySOCKSVersion", 5, &i);
if (i == 5)
cfg->proxy_type = PROXY_SOCKS5;
else
cfg->proxy_type = PROXY_SOCKS4;
}
}
gpps(sesskey, "ProxyHost", "proxy", cfg->proxy_host,
sizeof(cfg->proxy_host));
gppi(sesskey, "ProxyPort", 80, &cfg->proxy_port);
gpps(sesskey, "ProxyUsername", "", cfg->proxy_username,
sizeof(cfg->proxy_username));
gpps(sesskey, "ProxyPassword", "", cfg->proxy_password,
sizeof(cfg->proxy_password));
gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
cfg->proxy_telnet_command, sizeof(cfg->proxy_telnet_command));
gppmap(sesskey, "Environment", "", cfg->environmt, lenof(cfg->environmt));
gpps(sesskey, "UserName", "", cfg->username, sizeof(cfg->username));
gppi(sesskey, "UserNameFromEnvironment", 0, &cfg->username_from_env);
gpps(sesskey, "LocalUserName", "", cfg->localusername,
sizeof(cfg->localusername));
gppi(sesskey, "NoPTY", 0, &cfg->nopty);
gppi(sesskey, "Compression", 0, &cfg->compression);
gppi(sesskey, "TryAgent", 1, &cfg->tryagent);
gppi(sesskey, "AgentFwd", 0, &cfg->agentfwd);
gppi(sesskey, "ChangeUsername", 0, &cfg->change_username);
gppi(sesskey, "GssapiFwd", 0, &cfg->gssapifwd);
gprefs(sesskey, "Cipher", "\0",
ciphernames, CIPHER_MAX, cfg->ssh_cipherlist);
{
/* Backward-compatibility: we used to have an option to
* disable gex under the "bugs" panel after one report of
* a server which offered it then choked, but we never got
* a server version string or any other reports. */
char *default_kexes;
gppi(sesskey, "BugDHGEx2", 0, &i); i = 2-i;
if (i == FORCE_ON)
default_kexes = "dh-group14-sha1,dh-group1-sha1,rsa,WARN,dh-gex-sha1";
else
default_kexes = "dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,rsa,WARN";
gprefs(sesskey, "KEX", default_kexes,
kexnames, KEX_MAX, cfg->ssh_kexlist);
}
gppi(sesskey, "RekeyTime", 60, &cfg->ssh_rekey_time);
gpps(sesskey, "RekeyBytes", "1G", cfg->ssh_rekey_data,
sizeof(cfg->ssh_rekey_data));
gppi(sesskey, "SshProt", 2, &cfg->sshprot);
gpps(sesskey, "LogHost", "", cfg->loghost, sizeof(cfg->loghost));
gppi(sesskey, "SSH2DES", 0, &cfg->ssh2_des_cbc);
gppi(sesskey, "SshNoAuth", 0, &cfg->ssh_no_userauth);
gppi(sesskey, "AuthTIS", 0, &cfg->try_tis_auth);
gppi(sesskey, "AuthKI", 1, &cfg->try_ki_auth);
gppi(sesskey, "AuthGSSAPI", 1, &cfg->try_gssapi_auth);
gprefs(sesskey, "GSSList", "\0",
gsslibkeywords, ngsslibs, cfg->ssh_gsslist);
gppi(sesskey, "SshNoShell", 0, &cfg->ssh_no_shell);
gppfile(sesskey, "PublicKeyFile", &cfg->keyfile);
gpps(sesskey, "RemoteCommand", "", cfg->remote_cmd,
sizeof(cfg->remote_cmd));
gppi(sesskey, "RFCEnviron", 0, &cfg->rfc_environ);
gppi(sesskey, "PassiveTelnet", 0, &cfg->passive_telnet);
gppi(sesskey, "BackspaceIsDelete", 1, &cfg->bksp_is_delete);
gppi(sesskey, "RXVTHomeEnd", 0, &cfg->rxvt_homeend);
gppi(sesskey, "LinuxFunctionKeys", 0, &cfg->funky_type);
gppi(sesskey, "NoApplicationKeys", 0, &cfg->no_applic_k);
gppi(sesskey, "NoApplicationCursors", 0, &cfg->no_applic_c);
gppi(sesskey, "NoMouseReporting", 0, &cfg->no_mouse_rep);
gppi(sesskey, "NoRemoteResize", 0, &cfg->no_remote_resize);
gppi(sesskey, "NoAltScreen", 0, &cfg->no_alt_screen);
gppi(sesskey, "NoRemoteWinTitle", 0, &cfg->no_remote_wintitle);
{
/* Backward compatibility */
int no_remote_qtitle;
gppi(sesskey, "NoRemoteQTitle", 1, &no_remote_qtitle);
/* We deliberately interpret the old setting of "no response" as
* "empty string". This changes the behaviour, but hopefully for
* the better; the user can always recover the old behaviour. */
gppi(sesskey, "RemoteQTitleAction",
no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
&cfg->remote_qtitle_action);
}
gppi(sesskey, "NoDBackspace", 0, &cfg->no_dbackspace);
gppi(sesskey, "NoRemoteCharset", 0, &cfg->no_remote_charset);
gppi(sesskey, "ApplicationCursorKeys", 0, &cfg->app_cursor);
gppi(sesskey, "ApplicationKeypad", 0, &cfg->app_keypad);
gppi(sesskey, "NetHackKeypad", 0, &cfg->nethack_keypad);
gppi(sesskey, "AltF4", 1, &cfg->alt_f4);
gppi(sesskey, "AltSpace", 0, &cfg->alt_space);
gppi(sesskey, "AltOnly", 0, &cfg->alt_only);
gppi(sesskey, "ComposeKey", 0, &cfg->compose_key);
gppi(sesskey, "CtrlAltKeys", 1, &cfg->ctrlaltkeys);
gppi(sesskey, "TelnetKey", 0, &cfg->telnet_keyboard);
gppi(sesskey, "TelnetRet", 1, &cfg->telnet_newline);
gppi(sesskey, "LocalEcho", AUTO, &cfg->localecho);
gppi(sesskey, "LocalEdit", AUTO, &cfg->localedit);
#if (defined PERSOPORT) && (!defined FDJ)
gpps(sesskey, "Answerback", "KiTTY", cfg->answerback,
sizeof(cfg->answerback));
#else
gpps(sesskey, "Answerback", "PuTTY", cfg->answerback,
sizeof(cfg->answerback));
#endif
gppi(sesskey, "AlwaysOnTop", 0, &cfg->alwaysontop);
gppi(sesskey, "FullScreenOnAltEnter", 0, &cfg->fullscreenonaltenter);
gppi(sesskey, "HideMousePtr", 0, &cfg->hide_mouseptr);
gppi(sesskey, "SunkenEdge", 0, &cfg->sunken_edge);
gppi(sesskey, "WindowBorder", 1, &cfg->window_border);
gppi(sesskey, "CurType", 0, &cfg->cursor_type);
gppi(sesskey, "BlinkCur", 0, &cfg->blink_cur);
/* pedantic compiler tells me I can't use &cfg->beep as an int * :-) */
gppi(sesskey, "Beep", 1, &cfg->beep);
gppi(sesskey, "BeepInd", 0, &cfg->beep_ind);
gppfile(sesskey, "BellWaveFile", &cfg->bell_wavefile);
gppi(sesskey, "BellOverload", 1, &cfg->bellovl);
gppi(sesskey, "BellOverloadN", 5, &cfg->bellovl_n);
gppi(sesskey, "BellOverloadT", 2*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_t = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "BellOverloadS", 5*TICKSPERSEC
#ifdef PUTTY_UNIX_H
*1000
#endif
, &i);
cfg->bellovl_s = i
#ifdef PUTTY_UNIX_H
/ 1000
#endif
;
gppi(sesskey, "ScrollbackLines", 200, &cfg->savelines);
gppi(sesskey, "DECOriginMode", 0, &cfg->dec_om);
gppi(sesskey, "AutoWrapMode", 1, &cfg->wrap_mode);
gppi(sesskey, "LFImpliesCR", 0, &cfg->lfhascr);
gppi(sesskey, "CRImpliesLF", 0, &cfg->crhaslf);
gppi(sesskey, "DisableArabicShaping", 0, &cfg->arabicshaping);
gppi(sesskey, "DisableBidi", 0, &cfg->bidi);
gppi(sesskey, "WinNameAlways", 1, &cfg->win_name_always);
gpps(sesskey, "WinTitle", "", cfg->wintitle, sizeof(cfg->wintitle));
gppi(sesskey, "TermWidth", 80, &cfg->width);
gppi(sesskey, "TermHeight", 24, &cfg->height);
gppfont(sesskey, "Font", &cfg->font);
gppi(sesskey, "FontQuality", FQ_DEFAULT, &cfg->font_quality);
gppi(sesskey, "FontVTMode", VT_UNICODE, (int *) &cfg->vtmode);
gppi(sesskey, "UseSystemColours", 0, &cfg->system_colour);
gppi(sesskey, "TryPalette", 0, &cfg->try_palette);
gppi(sesskey, "ANSIColour", 1, &cfg->ansi_colour);
gppi(sesskey, "Xterm256Colour", 1, &cfg->xterm_256_colour);
gppi(sesskey, "BoldAsColour", 1, &cfg->bold_colour);
for (i = 0; i < 22; i++) {
static const char *const defaults[] = {
"187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
"0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
"0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
"85,85,255", "187,0,187", "255,85,255", "0,187,187",
"85,255,255", "187,187,187", "255,255,255"
};
char buf[20], buf2[30];
int c0, c1, c2;
sprintf(buf, "Colour%d", i);
gpps(sesskey, buf, defaults[i], buf2, sizeof(buf2));
if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
cfg->colours[i][0] = c0;
cfg->colours[i][1] = c1;
cfg->colours[i][2] = c2;
}
}
gppi(sesskey, "RawCNP", 0, &cfg->rawcnp);
gppi(sesskey, "PasteRTF", 0, &cfg->rtf_paste);
gppi(sesskey, "MouseIsXterm", 0, &cfg->mouse_is_xterm);
gppi(sesskey, "RectSelect", 0, &cfg->rect_select);
gppi(sesskey, "MouseOverride", 1, &cfg->mouse_override);
for (i = 0; i < 256; i += 32) {
static const char *const defaults[] = {
"0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
"0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
"1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
"2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
};
char buf[20], buf2[256], *p;
int j;
sprintf(buf, "Wordness%d", i);
gpps(sesskey, buf, defaults[i / 32], buf2, sizeof(buf2));
p = buf2;
for (j = i; j < i + 32; j++) {
char *q = p;
while (*p && *p != ',')
p++;
if (*p == ',')
*p++ = '\0';
cfg->wordness[j] = atoi(q);
}
}
/*
* The empty default for LineCodePage will be converted later
* into a plausible default for the locale.
*/
gpps(sesskey, "LineCodePage", "", cfg->line_codepage,
sizeof(cfg->line_codepage));
gppi(sesskey, "CJKAmbigWide", 0, &cfg->cjk_ambig_wide);
gppi(sesskey, "UTF8Override", 1, &cfg->utf8_override);
gpps(sesskey, "Printer", "", cfg->printer, sizeof(cfg->printer));
gppi (sesskey, "CapsLockCyr", 0, &cfg->xlat_capslockcyr);
gppi(sesskey, "ScrollBar", 1, &cfg->scrollbar);
gppi(sesskey, "ScrollBarFullScreen", 0, &cfg->scrollbar_in_fullscreen);
gppi(sesskey, "ScrollOnKey", 0, &cfg->scroll_on_key);
gppi(sesskey, "ScrollOnDisp", 1, &cfg->scroll_on_disp);
gppi(sesskey, "EraseToScrollback", 1, &cfg->erase_to_scrollback);
gppi(sesskey, "LockSize", 0, &cfg->resize_action);
gppi(sesskey, "BCE", 1, &cfg->bce);
gppi(sesskey, "BlinkText", 0, &cfg->blinktext);
gppi(sesskey, "X11Forward", 0, &cfg->x11_forward);
gpps(sesskey, "X11Display", "", cfg->x11_display,
sizeof(cfg->x11_display));
gppi(sesskey, "X11AuthType", X11_MIT, &cfg->x11_auth);
gppfile(sesskey, "X11AuthFile", &cfg->xauthfile);
gppi(sesskey, "LocalPortAcceptAll", 0, &cfg->lport_acceptall);
gppi(sesskey, "RemotePortAcceptAll", 0, &cfg->rport_acceptall);
gppmap(sesskey, "PortForwardings", "", cfg->portfwd, lenof(cfg->portfwd));
gppi(sesskey, "BugIgnore1", 0, &i); cfg->sshbug_ignore1 = 2-i;
gppi(sesskey, "BugPlainPW1", 0, &i); cfg->sshbug_plainpw1 = 2-i;
gppi(sesskey, "BugRSA1", 0, &i); cfg->sshbug_rsa1 = 2-i;
gppi(sesskey, "BugIgnore2", 0, &i); cfg->sshbug_ignore2 = 2-i;
{
int i;
gppi(sesskey, "BugHMAC2", 0, &i); cfg->sshbug_hmac2 = 2-i;
if (cfg->sshbug_hmac2 == AUTO) {
gppi(sesskey, "BuggyMAC", 0, &i);
if (i == 1)
cfg->sshbug_hmac2 = FORCE_ON;
}
}
gppi(sesskey, "BugDeriveKey2", 0, &i); cfg->sshbug_derivekey2 = 2-i;
gppi(sesskey, "BugRSAPad2", 0, &i); cfg->sshbug_rsapad2 = 2-i;
gppi(sesskey, "BugPKSessID2", 0, &i); cfg->sshbug_pksessid2 = 2-i;
gppi(sesskey, "BugRekey2", 0, &i); cfg->sshbug_rekey2 = 2-i;
gppi(sesskey, "BugMaxPkt2", 0, &i); cfg->sshbug_maxpkt2 = 2-i;
cfg->ssh_simple = FALSE;
gppi(sesskey, "StampUtmp", 1, &cfg->stamp_utmp);
gppi(sesskey, "LoginShell", 1, &cfg->login_shell);
gppi(sesskey, "ScrollbarOnLeft", 0, &cfg->scrollbar_on_left);
gppi(sesskey, "ShadowBold", 0, &cfg->shadowbold);
gppfont(sesskey, "BoldFont", &cfg->boldfont);
gppfont(sesskey, "WideFont", &cfg->widefont);
gppfont(sesskey, "WideBoldFont", &cfg->wideboldfont);
gppi(sesskey, "ShadowBoldOffset", 1, &cfg->shadowboldoffset);
gpps(sesskey, "SerialLine", "", cfg->serline, sizeof(cfg->serline));
gppi(sesskey, "SerialSpeed", 9600, &cfg->serspeed);
gppi(sesskey, "SerialDataBits", 8, &cfg->serdatabits);
gppi(sesskey, "SerialStopHalfbits", 2, &cfg->serstopbits);
gppi(sesskey, "SerialParity", SER_PAR_NONE, &cfg->serparity);
gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, &cfg->serflow);
#ifdef SCPORT
gppi(sesskey, "AuthPKCS11", 0, &cfg->try_pkcs11_auth);
gppfile(sesskey, "PKCS11LibFile", &cfg->pkcs11_libfile);
{ int k; for(k=0;k<sizeof(cfg->pkcs11_token_label);k++) cfg->pkcs11_token_label[k] = '\0'; }
gpps(sesskey, "PKCS11TokenLabel", "", cfg->pkcs11_token_label,
sizeof(cfg->pkcs11_token_label));
{ int k; for(k=0;k<sizeof(cfg->pkcs11_cert_label);k++) cfg->pkcs11_cert_label[k] = '\0'; }
gpps(sesskey, "PKCS11CertLabel", "", cfg->pkcs11_cert_label,
sizeof(cfg->pkcs11_cert_label));
#endif
#ifdef PERSOPORT
//char buf[25] ="" ;
//gpps(sesskey, "BCDelay", "0.", buf, sizeof(buf)) ; cfg->bcdelay = atof(buf) ;
//gpps(sesskey, "InitDelay", "2.0", buf, sizeof(buf)) ; cfg->initdelay = atof(buf) ;
gppi(sesskey, "SendToTray", 0, &cfg->sendtotray);
gppi(sesskey, "SaveOnExit", 0, &cfg->saveonexit);
//gpps(sesskey, "TransparencyValue", 0, buf, sizeof(buf)) ; cfg->transparencynumber = 255-atoi(buf) ;
gppi(sesskey, "TransparencyValue", 0, &cfg->transparencynumber ) ;
//cfg->transparencynumber = 255-cfg->transparencynumber ;
if( cfg->transparencynumber < -1 ) cfg->transparencynumber = -1 ;
if( cfg->transparencynumber > 255 ) cfg->transparencynumber = 255 ;
char PassKey[1024] = "" ;
sprintf( PassKey, "%s%sKiTTY", cfg->host, cfg->termtype ) ;
gpps(sesskey, "Folder", "", cfg->folder, sizeof(cfg->folder));
gppi(sesskey, "Icone", 1, &cfg->icone);
gpps(sesskey, "IconeFile", "", cfg->iconefile, sizeof(cfg->iconefile));
gpps(sesskey, "Password", "", cfg->password, sizeof(cfg->password));
decryptstring( cfg->password, PassKey ) ;
if( strlen( cfg->password ) > 0 ) {
FILE *fp ;
if( ( fp = fopen( "kitty.password", "r") ) != NULL ) { // Affichage en clair du password dans le fichier kitty.password si celui-ci existe
fclose( fp ) ;
if( ( fp = fopen( "kitty.password", "w" ) ) != NULL ) {
fprintf( fp, "%s", cfg->password ) ;
fclose( fp ) ;
}
}
}
gpps(sesskey, "Autocommand", "", cfg->autocommand, sizeof(cfg->autocommand));
gpps(sesskey, "AutocommandOut", "", cfg->autocommandout, sizeof(cfg->autocommandout));
gpps(sesskey, "AntiIdle", "", cfg->antiidle, sizeof(cfg->antiidle));
gpps(sesskey, "LogTimestamp", "", cfg->logtimestamp, sizeof(cfg->logtimestamp));
gppfile(sesskey, "Scriptfile", &cfg->scriptfile);
gppi(sesskey, "TermXPos", -1, &cfg->xpos);
gppi(sesskey, "TermYPos", -1, &cfg->ypos);
gppi(sesskey, "WindowState", 0, &cfg->windowstate);
gppi(sesskey, "SaveWindowPos", 0, &cfg->save_windowpos); /* BKG */
#endif
#ifdef RECONNECTPORT
gppi(sesskey, "WakeupReconnect", 0, &cfg->wakeup_reconnect);
gppi(sesskey, "FailureReconnect", 0, &cfg->failure_reconnect);
#endif
#ifdef IMAGEPORT
gppi(sesskey, "BgOpacity", 50, &cfg->bg_opacity);
gppi(sesskey, "BgSlideshow", 0, &cfg->bg_slideshow);
gppi(sesskey, "BgType", 0, &cfg->bg_type);
gppfile(sesskey, "BgImageFile", &cfg->bg_image_filename);
gppi(sesskey, "BgImageStyle", 0, &cfg->bg_image_style);
gppi(sesskey, "BgImageAbsoluteX", 0, &cfg->bg_image_abs_x);
gppi(sesskey, "BgImageAbsoluteY", 0, &cfg->bg_image_abs_y);
gppi(sesskey, "BgImagePlacement", 0, &cfg->bg_image_abs_fixed);
#endif
#ifdef URLPORT
gppi(sesskey, "CopyURLDetection", 1, &cfg->copy_clipbd_url_reg);
#endif
#ifdef HYPERLINKPORT
/*
* HACK: PuttyTray / Nutty
* Hyperlink stuff: Save hyperlink settings
*/
gppi(sesskey, "HyperlinkUnderline", 1, &cfg->url_underline);
gppi(sesskey, "HyperlinkUseCtrlClick", 0, &cfg->url_ctrl_click);
gppi(sesskey, "HyperlinkBrowserUseDefault", 1, &cfg->url_defbrowser);
gpps(sesskey, "HyperlinkBrowser", "", cfg->url_browser, sizeof(cfg->url_browser));
gppi(sesskey, "HyperlinkRegularExpressionUseDefault", 1, &cfg->url_defregex);
#ifndef NO_HYPERLINK
gpps(sesskey, "HyperlinkRegularExpression", urlhack_default_regex, cfg->url_regex, sizeof(cfg->url_regex));
#endif
#endif
#ifdef CYGTERMPORT
gppi(sesskey, "CygtermAutoPath", 1, &cfg->cygautopath);
gpps(sesskey, "CygtermCommand", "", cfg->cygcmd, sizeof(cfg->cygcmd));
#endif
#ifdef ZMODEMPORT
gpps(sesskey, "rzCommand", "rz", cfg->rzcommand, sizeof(cfg->rzcommand));
gpps(sesskey, "rzOptions", "-e -v", cfg->rzoptions, sizeof(cfg->rzoptions));
gpps(sesskey, "szCommand", "sz", cfg->szcommand, sizeof(cfg->szcommand));
gpps(sesskey, "szOptions", "-e -v", cfg->szoptions, sizeof(cfg->szoptions));
gpps(sesskey, "zDownloadDir", "C:\\", cfg->zdownloaddir, sizeof(cfg->zdownloaddir));
#endif
}