static void gs_flush_chars(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static void gs_flush_chars(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
#ifdef CONFIG_USB_G_LGE_ANDROID
if(!port)
return;
#endif
pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
port->port_num, tty, count);
spin_lock_irqsave(&port->port_lock, flags);
if (count)
count = kfifo_in(&port->port_write_buf, buf, count);
/* treat count == 0 as flush_chars() */
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
return count;
}
static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int status;
pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
port->port_num, tty, count);
spin_lock_irqsave(&port->port_lock, flags);
if (count)
count = gs_buf_put(&port->port_write_buf, buf, count);
if (port->port_usb)
status = gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
return count;
}
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
unsigned long flags;
pr_vdebug("%s: %d bytes\n", __func__, req->actual);
spin_lock_irqsave(&port->port_lock, flags);
list_add(&req->list, &port->write_pool);
switch (req->status) {
default:
/* presumably a transient fault */
pr_warning("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
/* FALL THROUGH */
case 0:
/* normal completion */
if (port->port_usb)
gs_start_tx(port);
break;
case -ESHUTDOWN:
/* disconnect */
printk("%s: ESHUTDOWN\n", __func__);
break;
case -ENODEV:
spin_lock(&port->port_lock);
printk("%s: ENODEV\n", __func__);
list_add_tail(&req->list, &port->read_pool);
/* Implemented handling in future if needed */
spin_unlock(&port->port_lock);
break;
spin_lock(&port->port_lock);
list_add_tail(&req->list, &port->read_pool);
printk(KERN_ERR
"gs_read_complete: unexpected status error, status=%d\n",
req->status);
spin_unlock(&port->port_lock);
/* goto requeue; */
break;
}
}
static void gs_flush_chars(struct tty_struct *tty)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
//ALPS00423739
if(!port)
{
printk("ERROR!!! port is closed!! %s, line %d: port = %p\n", __func__, __LINE__, port);
/*abort immediately after disconnect */
return;
}
//ALPS00423739
pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static void gs_flush_chars(struct tty_struct *tty)
{
struct gs_port *port = NULL;
unsigned long flags;
if(!tty ){
pr_err("%s error: wrong parameter! *tty=0x%x", __func__, (unsigned int) tty);
return;
}
port = tty->driver_data;
if(!port){
pr_err("%s error: port = NULL! already closed??\n", __func__);
return;
}
pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
spin_lock_irqsave(&port->port_lock, flags);
if (port->port_usb)
gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int status;
pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
port->port_num, tty, count);
spin_lock_irqsave(&port->port_lock, flags);
if (unlikely(!port->open_count)) {
spin_unlock_irqrestore(&port->port_lock, flags);
return -EINVAL;
}
if (unlikely(!port->port_usb || port->is_suspend)) {
port->stat_write_not_conn++;
spin_unlock_irqrestore(&port->port_lock, flags);
return -ESHUTDOWN;
}
/*
* we don't have enough room for some data
* may be the host don't start read, so drop the data.
* otherwise the printed thread may pending forever.
*/
if (!port->line_state_on && list_empty(&port->write_pool)) {
port->stat_write_no_mem++;
spin_unlock_irqrestore(&port->port_lock, flags);
return -ENOMEM;
}
if (count)
count = gs_buf_put(&port->port_write_buf, buf, count);
/* treat count == 0 as flush_chars() */
if (port->port_usb)
status = gs_start_tx(port);/* [false alarm]:fortify disable */
spin_unlock_irqrestore(&port->port_lock, flags);
return count;
}
static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct gs_port *port = tty->driver_data;
unsigned long flags;
int status;
#ifdef CONFIG_USB_G_LGE_ANDROID
if (!port)
return 0;
#endif
pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
port->port_num, tty, count);
spin_lock_irqsave(&port->port_lock, flags);
if (count)
count = gs_buf_put(&port->port_write_buf, buf, count);
/* treat count == 0 as flush_chars() */
if (port->port_usb)
status = gs_start_tx(port);
spin_unlock_irqrestore(&port->port_lock, flags);
return count;
}
/**
* gserial_connect - notify TTY I/O glue that USB link is active
* @gser: the function, set up with endpoints and descriptors
* @port_num: which port is active
* Context: any (usually from irq)
*
* This is called activate endpoints and let the TTY layer know that
* the connection is active ... not unlike "carrier detect". It won't
* necessarily start I/O queues; unless the TTY is held open by any
* task, there would be no point. However, the endpoints will be
* activated so the USB host can perform I/O, subject to basic USB
* hardware flow control.
*
* Caller needs to have set up the endpoints and USB function in @dev
* before calling this, as well as the appropriate (speed-specific)
* endpoint descriptors, and also have set up the TTY driver by calling
* @gserial_setup().
*
* Returns negative errno or zero.
* On success, ep->driver_data will be overwritten.
*/
int gserial_connect(struct gserial *gser, u8 port_num)
{
struct gs_port *port;
unsigned long flags;
int status;
if (!gs_tty_driver || port_num >= n_ports)
return -ENXIO;
/* we "know" gserial_cleanup() hasn't been called */
port = ports[port_num].port;
/* activate the endpoints */
status = usb_ep_enable(gser->in, gser->in_desc);
if (status < 0)
return status;
gser->in->driver_data = port;
status = usb_ep_enable(gser->out, gser->out_desc);
if (status < 0)
goto fail_out;
gser->out->driver_data = port;
/* then tell the tty glue that I/O can work */
spin_lock_irqsave(&port->port_lock, flags);
gser->ioport = port;
port->port_usb = gser;
/* REVISIT unclear how best to handle this state...
* we don't really couple it with the Linux TTY.
*/
gser->port_line_coding = port->port_line_coding;
/* REVISIT if waiting on "carrier detect", signal. */
/* if it's already open, start I/O ... and notify the serial
* protocol about open/close status (connect/disconnect).
*/
if (port->open_count) {
pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
gs_start_io(port);
if (gser->connect)
gser->connect(gser);
} else {
if (gser->disconnect)
gser->disconnect(gser);
}
#ifdef CONFIG_USB_ANDROID_SH_SERIALS
if (port->port_usb)
status = gs_start_tx(port);
#endif /* CONFIG_USB_ANDROID_SH_SERIALS */
spin_unlock_irqrestore(&port->port_lock, flags);
return status;
fail_out:
usb_ep_disable(gser->in);
gser->in->driver_data = NULL;
return status;
}
/*
* gs_start_tx
*
* This function finds available write requests, calls
* gs_send_packet to fill these packets with data, and
* continues until either there are no more write requests
* available or no more data to send. This function is
* run whenever data arrives or write requests are available.
*
* Context: caller owns port_lock; port_usb is non-null.
*/
static int gs_start_tx(struct gs_port *port)
/*
__releases(&port->port_lock)
__acquires(&port->port_lock)
*/
{
struct list_head *pool = &port->write_pool;
struct usb_ep *in = port->port_usb->in;
int status = 0;
static long prev_len;
bool do_tty_wake = false;
while (!list_empty(pool)) {
struct usb_request *req;
int len;
req = list_entry(pool->next, struct usb_request, list);
len = gs_send_packet(port, req->buf, TX_BUF_SIZE);
if (len == 0) {
/* Queue zero length packet */
#if 1 //QCT_SBA
if (prev_len && (prev_len % in->maxpacket == 0)) {
#else
if (prev_len & (prev_len % in->maxpacket == 0)) {
#endif
req->length = 0;
list_del(&req->list);
spin_unlock(&port->port_lock);
status = usb_ep_queue(in, req, GFP_ATOMIC);
spin_lock(&port->port_lock);
if (!port->port_usb) {
gs_free_req(in, req);
break;
}
if (status) {
printk(KERN_ERR "%s: %s err %d\n",
__func__, "queue", status);
list_add(&req->list, pool);
}
prev_len = 0;
}
wake_up_interruptible(&port->drain_wait);
break;
}
do_tty_wake = true;
req->length = len;
list_del(&req->list);
pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
port->port_num, len, *((u8 *)req->buf),
*((u8 *)req->buf+1), *((u8 *)req->buf+2));
/* Drop lock while we call out of driver; completions
* could be issued while we do so. Disconnection may
* happen too; maybe immediately before we queue this!
*
* NOTE that we may keep sending data for a while after
* the TTY closed (dev->ioport->port_tty is NULL).
*/
spin_unlock(&port->port_lock);
status = usb_ep_queue(in, req, GFP_ATOMIC);
spin_lock(&port->port_lock);
/*
* If port_usb is NULL, gserial disconnect is called
* while the spinlock is dropped and all requests are
* freed. Free the current request here.
*/
if (!port->port_usb) {
do_tty_wake = false;
gs_free_req(in, req);
break;
}
if (status) {
pr_debug("%s: %s %s err %d\n",
__func__, "queue", in->name, status);
list_add(&req->list, pool);
break;
}
prev_len = req->length;
}
if (do_tty_wake && port->port_tty)
tty_wakeup(port->port_tty);
return status;
}
/*
* Context: caller owns port_lock, and port_usb is set
*/
static unsigned gs_start_rx(struct gs_port *port)
/*
__releases(&port->port_lock)
__acquires(&port->port_lock)
*/
{
struct list_head *pool = &port->read_pool;
struct usb_ep *out = port->port_usb->out;
unsigned started = 0;
while (!list_empty(pool)) {
struct usb_request *req;
int status;
struct tty_struct *tty;
/* no more rx if closed */
tty = port->port_tty;
if (!tty)
break;
req = list_entry(pool->next, struct usb_request, list);
list_del(&req->list);
req->length = RX_BUF_SIZE;
/* drop lock while we call out; the controller driver
* may need to call us back (e.g. for disconnect)
*/
spin_unlock(&port->port_lock);
status = usb_ep_queue(out, req, GFP_ATOMIC);
spin_lock(&port->port_lock);
/*
* If port_usb is NULL, gserial disconnect is called
* while the spinlock is dropped and all requests are
* freed. Free the current request here.
*/
if (!port->port_usb) {
started = 0;
gs_free_req(out, req);
break;
}
if (status) {
pr_debug("%s: %s %s err %d\n",
__func__, "queue", out->name, status);
list_add(&req->list, pool);
break;
}
started++;
}
return started;
}
/*
* RX work queue takes data out of the RX queue and hands it up to the TTY
* layer until it refuses to take any more data (or is throttled back).
* Then it issues reads for any further data.
*
* If the RX queue becomes full enough that no usb_request is queued,
* the OUT endpoint may begin NAKing as soon as its FIFO fills up.
* So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
* can be buffered before the TTY layer's buffers (currently 64 KB).
*/
static void gs_rx_push(struct work_struct *w)
{
struct gs_port *port = container_of(w, struct gs_port, push);
struct tty_struct *tty;
struct list_head *queue = &port->read_queue;
bool disconnect = false;
bool do_push = false;
/* hand any queued data to the tty */
spin_lock_irq(&port->port_lock);
tty = port->port_tty;
while (!list_empty(queue)) {
struct usb_request *req;
req = list_first_entry(queue, struct usb_request, list);
/* discard data if tty was closed */
if (!tty)
goto recycle;
/* leave data queued if tty was rx throttled */
if (test_bit(TTY_THROTTLED, &tty->flags))
break;
switch (req->status) {
case -ESHUTDOWN:
disconnect = true;
pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
break;
default:
/* presumably a transient fault */
pr_warning(PREFIX "%d: unexpected RX status %d\n",
port->port_num, req->status);
/* FALLTHROUGH */
case 0:
/* normal completion */
break;
}
/* push data to (open) tty */
if (req->actual) {
char *packet = req->buf;
unsigned size = req->actual;
unsigned n;
int count;
/* we may have pushed part of this packet already... */
n = port->n_read;
if (n) {
packet += n;
size -= n;
}
count = tty_insert_flip_string(tty, packet, size);
if (count)
do_push = true;
if (count != size) {
/* stop pushing; TTY layer can't handle more */
port->n_read += count;
pr_vdebug(PREFIX "%d: rx block %d/%d\n",
port->port_num,
count, req->actual);
break;
}
port->n_read = 0;
}
recycle:
list_move(&req->list, &port->read_pool);
}
/* Push from tty to ldisc; this is immediate with low_latency, and
* may trigger callbacks to this driver ... so drop the spinlock.
*/
if (tty && do_push) {
spin_unlock_irq(&port->port_lock);
tty_flip_buffer_push(tty);
wake_up_interruptible(&tty->read_wait);
spin_lock_irq(&port->port_lock);
/* tty may have been closed */
tty = port->port_tty;
}
/* We want our data queue to become empty ASAP, keeping data
* in the tty and ldisc (not here). If we couldn't push any
* this time around, there may be trouble unless there's an
* implicit tty_unthrottle() call on its way...
*
* REVISIT we should probably add a timer to keep the work queue
* from starving ... but it's not clear that case ever happens.
*/
if (!list_empty(queue) && tty) {
if (!test_bit(TTY_THROTTLED, &tty->flags)) {
if (do_push)
queue_work(gserial_wq, &port->push);
else
pr_warning(PREFIX "%d: RX not scheduled?\n",
port->port_num);
}
}
/* If we're still connected, refill the USB RX queue. */
if (!disconnect && port->port_usb)
gs_start_rx(port);
spin_unlock_irq(&port->port_lock);
}
static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
unsigned long flags;
/* Queue all received data until the tty layer is ready for it. */
spin_lock_irqsave(&port->port_lock, flags);
list_add_tail(&req->list, &port->read_queue);
queue_work(gserial_wq, &port->push);
spin_unlock_irqrestore(&port->port_lock, flags);
}
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
unsigned long flags;
spin_lock_irqsave(&port->port_lock, flags);
list_add(&req->list, &port->write_pool);
switch (req->status) {
default:
/* presumably a transient fault */
pr_warning("%s: unexpected %s status %d\n",
__func__, ep->name, req->status);
/* FALL THROUGH */
case 0:
/* normal completion */
if (port->port_usb)
gs_start_tx(port);
break;
case -ESHUTDOWN:
/* disconnect */
pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
break;
}
spin_unlock_irqrestore(&port->port_lock, flags);
}
static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
{
struct usb_request *req;
while (!list_empty(head)) {
req = list_entry(head->next, struct usb_request, list);
list_del(&req->list);
gs_free_req(ep, req);
}
}
static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
int num, int size,
void (*fn)(struct usb_ep *, struct usb_request *))
{
int i;
struct usb_request *req;
/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
* do quite that many this time, don't fail ... we just won't
* be as speedy as we might otherwise be.
*/
for (i = 0; i < num; i++) {
req = gs_alloc_req(ep, size, GFP_ATOMIC);
if (!req)
return list_empty(head) ? -ENOMEM : 0;
req->complete = fn;
list_add_tail(&req->list, head);
}
return 0;
}
/* This stolen/adapted from serial/sn_console.c */
static void gs_console_write(struct console *cons, const char *buf, unsigned count)
{
unsigned long flags = 0;
unsigned status;
struct gs_port *port;
port = cons->data;
/* Just chuck everything if USB side is not up. */
if (!port->port_usb) return;
/* somebody really wants this output, might be an
* oops, kdb, panic, etc. make sure they get it. */
if (spin_is_locked(&port->port_lock)) {
char *get = port->port_write_buf.buf_get;
char *put = port->port_write_buf.buf_put;
int got_lock = 0;
int counter;
/*
* We attempt to determine if someone has died with the
* lock. We wait ~20 secs after the head and tail ptrs
* stop moving and assume the lock holder is not functional
* and plow ahead. If the lock is freed within the time out
* period we re-get the lock and go ahead normally. We also
* remember if we have plowed ahead so that we don't have
* to wait out the time out period again - the asumption
* is that we will time out again.
*/
for (counter = 0; counter < 150; mdelay(125), counter++) {
if (!spin_is_locked(&port->port_lock) || port->stole_lock) {
if (!port->stole_lock)
break;
spin_lock_irqsave(&port->port_lock, flags);
got_lock = 1;
break;
}
/* still locked */
if ((get != port->port_write_buf.buf_get)
|| (put != port->port_write_buf.buf_put)) {
put = port->port_write_buf.buf_put;
get = port->port_write_buf.buf_get;
counter = 0;
}
}
/* Make space by flushing any waiting output */
if (port->port_usb)
gs_start_tx(port);
while (count) {
count -= gs_buf_putr(&port->port_write_buf, buf, count);
if (port->port_usb) break;
/* Flush our stuff immediately */
if (!gs_start_tx(port))
mdelay(125);
}
if (got_lock) {
spin_unlock_irqrestore(&port->port_lock, flags);
port->stole_lock = 0;
} else {
/* fell thru */
port->stole_lock = 1;
}
return;
}
port->stole_lock = 0;
spin_lock_irqsave(&port->port_lock, flags);
/* Flush out any waiting output so we have as much space as possible */
if (port->port_usb)
status = gs_start_tx(port);
while (count) {
count -= gs_buf_putr(&port->port_write_buf, buf, count);
if (port->port_usb) break;
/* Flush our stuff immediately */
if (!gs_start_tx(port))
mdelay(125);
}
spin_unlock_irqrestore(&port->port_lock, flags);
}
