//=====================================================================================
// Window for WIND
//=====================================================================================
CFuiWind::CFuiWind(Tag idn, const char *filename)
:CFuiWindow(idn,filename,0,0,0)
{ char erm[128];
sprintf(erm,"Incorrect TEMPLATE file: %",filename);
//---Locate components ------------------------------------
layW = (CFuiList*) GetComponent('layr');
if (0 == layW) gtfo(erm);
errW = (CFuiLabel*) GetComponent('eror');
if (0 == layW) gtfo(erm);
popW = (CFuiPopupMenu*) GetComponent('popm');
if (0 == popW) gtfo(erm);
skyW = (CFuiTextField*) GetComponent('ceil');
if (0 == skyW) gtfo(erm);
//-- Init menu -------------------------------------------
popW->CreatePage(&cMEN,coverMENU);
layer = globals->wtm->GetCloudLayer();
popW->SetButtonText((char*)cMEN.aText[layer]);
//-- Init cloud ceil -------------------------------------
ceil = globals->wtm->GetCloudCeil();
ChangeCeil(0);
//-- Init list box ---------------------------------------
U_INT type = LIST_HAS_TITLE + LIST_NOHSCROLL;
windBOX.SetParameters(this,'layr',type);
windBOX.Display();
Select();
}
//=====================================================================================
//=====================================================================================
// Weather overview
//=====================================================================================
CFuiWeatherView::CFuiWeatherView(Tag idn, const char *filename)
:CFuiWindow(idn,filename,0,0,0)
{ char *erm = "Invalid template %s";
//---Get window components -------------------------------
datW = (CFuiLabel*)GetComponent('date');
if (0 == datW) gtfo(erm,filename);
timW = (CFuiLabel*)GetComponent('time');
if (0 == datW) gtfo(erm,filename);
utcW = (CFuiLabel*)GetComponent('utc_');
if (0 == utcW) gtfo(erm,filename);
disW = (CFuiLabel*)GetComponent('dist');
if (0 == disW) gtfo(erm,filename);
locW = (CFuiLabel*)GetComponent('loca');
if (0 == locW) gtfo(erm,filename);
winW = (CFuiLabel*)GetComponent('wind');
if (0 == winW) gtfo(erm,filename);
altW = (CFuiLabel*)GetComponent('alti');
if (0 == altW) gtfo(erm,filename);
tmpW = (CFuiLabel*)GetComponent('temp');
if (0 == tmpW) gtfo(erm,filename);
barW = (CFuiLabel*)GetComponent('baro');
if (0 == barW) gtfo(erm,filename);
cldW = (CFuiLabel*)GetComponent('clod');
if (0 == cldW) gtfo(erm,filename);
//---------------------------------------------------------
Apt = 0;
Req.SetWindow(this);
}
//--------------------------------------------------------------------------
// Create a new area
// 1) A rectangular area is located staring from the row and column of the region
// 2) Two new candidate areas are pushed down to the stack: One from
// the horizontal end and one from the top row, provide the slots are not
// already done.
//
//--------------------------------------------------------------------------
void CImport::OpenArea(CRectArea *zon)
{ char row = zon->row;
char col = zon->col;
zon->lgx = 1;
zon->lgz = 1;
zon->iden = ridx;
zon->end = 0;
int No = (row << TC_BY32) + col;
zon->type = Spot[No].GetType();
zon->elv = Spot[No].GetValue();
GetBaseRow(zon);
GetLastRow(zon);
AreaDone(zon);
//---Add right and top area ----------------
if (zon->OpenToX())
{ CRectArea *rzn = Stack + widx;
rzn->col = zon->col + zon->lgx;
rzn->row = zon->row;
if (FreeSpot(rzn)) widx++;
if (widx == AREA_STAK) gtfo ("too much areas");
}
if (zon->OpenToZ())
{ CRectArea *tzn = Stack + widx;
tzn->col = zon->col;
tzn->row = zon->row + zon->lgz;
if (FreeSpot(tzn)) widx++;
if (widx == AREA_STAK) gtfo ("too much areas");
}
}
//---------------------------------------------------------------------
// Read the knob position
//---------------------------------------------------------------------
void C_Knob::ReadPOSN(SStream *str)
{ if (0 == mgg) gtfo("Knob: need mother gauge");
char txt[128];
ReadString(txt,128,str);
int px,py;
int wx,hy;
int nf = sscanf(txt,"%d , %d , %d , %d",&px,&py,&wx,&hy);
if (4 != nf) gtfo("Invalide <posn>");
x1 = short(px);
y1 = short(py);
wd = short(wx);
ht = short(hy);
InitQuad();
return;
}
//-----------------------------------------------------------------
// Read Parameters
//-----------------------------------------------------------------
int CgQUAD::Read(SStream *stream, Tag tag)
{ if (0 == mgg) gtfo("<rdim> needs mother gauge");
float pm;
char txt[128];
switch(tag) {
case 'bmap':
ReadStrip(stream,txdf);
return TAG_READ;
case 'rdim':
ReadString(txt,128,stream);
DecodeRDIM(txt);
return TAG_READ;
//--- rigth skew ------------
case 'rskw':
ReadFloat(&pm,stream);
quad[0].VT_Y += pm;
quad[3].VT_Y += pm;
return TAG_READ;
//--- left skew ------------
case 'lskw':
ReadFloat(&pm,stream);
quad[1].VT_Y += pm;
quad[2].VT_Y += pm;
return TAG_READ;
}
WARNINGLOG("Unknown Tag %s",TagToString(tag));
return TAG_IGNORED;
}
//-----------------------------------------------------------------
// Copy elevations
//-----------------------------------------------------------------
void CElvSpot::CopyTo(int *dst,int nbv)
{ int mvt = Dim * Dim;
int *src = elev;
if (nbv != mvt) gtfo("Area error");
for(int k=0; k<nbv; k++) *dst++ = *src++;
return;
}
//----------------------------------------------------------------------
// Decode rotation center
//----------------------------------------------------------------------
void CNeedle::ReadROTC(SStream *str)
{ char txt[128];
float x,y;
ReadString(txt,128,str);
if (2 != sscanf(txt," %f , %f \t",&x,&y)) gtfo("Invalid <rotc> tag");
rotn.SetCenter(x,y);
return;
}
//=========================================================================================
// AIRCRAFT SELECTION WINDOW
// Display a list of available aircraftt with icon and make according to the popup filter
// NOTE: Due to the flag ok in the VehicleSelect.win, the button id is renamed okok
//=========================================================================================
CFuiSetAir::CFuiSetAir(Tag idn, const char *filename)
:CFuiWindow(idn,filename,0,0,0)
{ fSlot.FixeIt();
airBOX.SetParameters(this,'crft',0,64);
selPOP = (CFuiPopupMenu*)GetComponent('type');
if (0 == selPOP) gtfo("Wrong file VehicleSelect.win");
selBTN = (CFuiButton*) GetComponent('okok');
if (0 == selBTN) gtfo("Wrong file VehicleSelect.win");
//---Create associated mask (change size when adding new type) ---------------
mask[0] = 0x00FF;
mask[1] = 0x01;
mask[2] = 0x02;
mask[3] = 0x04;
mask[4] = 0x08;
mask[5] = 0x10;
EditSelPopup();
}
//----------------------------------------------------------------
// Init quad to the requested dimension
//----------------------------------------------------------------
void VStrip::ReadPOSN(SStream *str)
{ if (0 == mgg) gtfo("VStrip need mother gauge");
vtab = new TC_VTAB[4];
vOfs = mgg->FixRoom(4); // OK
mgg->DecodePOSN(str,vtab,1);
quad = vtab;
return;
}
int main(int ac, char *av[]){
static struct termios origt,newt;
volatile char c;
printf("Welcome to the menu system\n");
if( tcgetattr(STDIN_FILENO,&origt) < 0 )
gtfo("tcgetattr failed!\n");
newt = origt;
newt.c_lflag &= ~(ICANON);
if( tcsetattr(STDIN_FILENO, TCSANOW, &newt) < 0 ){
tcsetattr(STDIN_FILENO, TCSANOW, &origt);
gtfo("tcsetattr failed!\n");
}
menu *m1 = newMenu("Ultimate control",3);
m1->items[0] = *newItem("Item 1", &item1);
m1->items[1] = *newItem("Item 2", &item2);
m1->items[2] = *newItem("Item 3", &item3);
// Do some useful shit
while(1){
c = getchar();
if( c == 'q' )
break;
switch(c){
case 'j':
menu_down(m1);
break;
case 'k':
menu_up(m1);
break;
case 'e': // execute
menu_execute(m1);
break;
}
}
// Done with useful shit
tcsetattr(STDIN_FILENO, TCSANOW, &origt);
printf("We're done, bye!\n");
}
//-----------------------------------------------------------------
// Decode dimension and build quad
//-----------------------------------------------------------------
void CgQUAD::DecodeRDIM(char *txt)
{ float w,h;
int nf = sscanf(txt," %f , %f ", &w, &h);
if (2 != nf) gtfo("Invalid <rdim> parameters");
float sx = mgg->GetXPos();
float sy = mgg->GetYPos();
mgg->BuildQuad(quad,sx,sy,w,h);
return;
}
//----------------------------------------------------------------------
// Decode rotation center and dimension
// <cntr> -------
// x,y,r
//----------------------------------------------------------------------
void CNeedle::ReadNCTR(SStream *str)
{ if (0 == mgg) gtfo("<nctrj>: Mother Gauge needed");
vtab = new TC_VTAB[4];
vOfs = mgg->FixRoom(4);
mgg->DecodeNCTR(str,vtab,1);
//---- set the needle quad --------------
rotn.SetVTAB(vtab);
rotn.SetVBO(vOfs);
return;
}
//----------------------------------------------------------------
// Read a strip of vertical texture
// By default, the quad is copied from the mother gauge
//----------------------------------------------------------------
void VStrip::ReadStrip(SStream *s)
{ CStreamObject::ReadStrip(s,txd);
hiFrame = txd.nf - 1;
if (quad) return;
//---- Allocate a quad and dupplicate the mother gauge --
if (0 == mgg) gtfo("VStrip need mother gauge");
quad = mgg->GetVTAB();
vOfs = mgg->ofsVBO(); // OK
return;
}
//----------------------------------------------------------------------
// If the position is specified, the needle uses its own Quad
// whatever the position is
// NOTE: The coordinates are relative to the top left corner of the Gauge
//----------------------------------------------------------------------
void CNeedle::ReadPOSN(SStream *str)
{ if (0 == mgg) gtfo("<posn>: Mother Gauge needed");
//--- Allocate the needle quad --------------------------
vtab = new TC_VTAB[4];
vOfs = mgg->FixRoom(4);
mgg->DecodePOSN(str,vtab,1);
//---- Set the needle quad ------------------------
rotn.SetVTAB(vtab);
rotn.SetVBO(vOfs);
return;
}
//----------------------------------------------------------------------
// If the projection is specified, the needle uses its own Quad
// whatever the position is
// NOTE: All coordinates are relative to the top left corner of the gauge
//----------------------------------------------------------------------
void CNeedle::ReadPROJ(SStream *str)
{ if (0 == mgg) gtfo("<proj>: Mother Gauge needed");
vtab = new TC_VTAB[4];
vOfs = mgg->FixRoom(4);
//--- Decode projector corners -----------
mgg->DecodePROJ(str,vtab,1);
//---- Set the needle quad ---------------
rotn.SetVTAB(vtab);
rotn.SetVBO(vOfs);
return;
}
//=======================================================================================
// CFuiFuel window
//=======================================================================================
CFuiFuel::CFuiFuel(Tag idn, const char* filename)
:CFuiWindow(idn,filename,0,0,0)
{ char *erm = "incorrect VehicleFuel.WIN file";
rul = (CFuiSlider*)GetComponent('tots');
if (0 == rul) gtfo(erm);
All = (CFuiLabel *)GetComponent('totl');
if (0 == All) gtfo(erm);
Sel = (CFuiLabel *)GetComponent('selt');
if (0 == Sel) gtfo(erm);
pop = (CFuiPopupMenu*)GetComponent('stuf');
if (0 == pop) gtfo(erm);
Tnk = (CFuiList*) GetComponent('tank');
if (0 == Tnk) gtfo(erm);
Tot.SetName("ALL TANKS");
sCel = &Tot;
cBOX = 0;
//---------------------------------------------------
plan = globals->pln;
if (plan) Init();
else Close();
}
//--------------------------------------------------------------
// Read list of actions
//---------------------------------------------------------------
void CGaugeAction::ReadActions(SStream *str)
{ char txt[128];
int na = 0;
ReadInt(&na,str);
while (na--)
{ ReadString(txt,128,str);
BASE_ACT *a = new BASE_ACT();
vact.push_back(a);
if (DecodeFrame (txt,a)) continue;
if (DecodeMessage(txt,a)) continue;
gtfo("Bad Gauge action");
}
return;
}
//-----------------------------------------------------------
// Read texture position
//-----------------------------------------------------------
void C_Cover::ReadSize(SStream *str)
{ if (0 == mgg) gtfo("Mother Gauge needed");
int px = 0;
int py = 0;
int wd = 0;
int ht = 0;
ReadSIZE(str,&px,&py,&wd,&ht);
px += mgg->GetXPos();
py += mgg->GetYPos();
//---- Build the needle quad ------------------------
vtab = new TC_VTAB[4];
vOfs = mgg->FixRoom(4);
mgg->BuildQuad(vtab,px,py,wd,ht);
quad = vtab;
}
//---------------------------------------------------------------------
// Init quad from mother gauge
//---------------------------------------------------------------------
void C_Knob::InitQuad()
{ if (0 == mgg) gtfo("Knob: need mother gauge");
if (vOfs) return;
//--- Compute rectangle ---------------------------
x2 = x1 + wd;
y2 = y1 + ht;
//--- Init quad -----------------------------------
int sx = mgg->GetXPos() + x1; // x position in panel
int sy = mgg->GetYPos() + y1; // y position in panel
mgg->BuildQuad(quad,sx,sy,wd,ht); // Init knob quad
vOfs = mgg->FixRoom(4);
rotn.SetVTAB(quad);
rotn.SetVBO(vOfs);
return;
}
//---------------------------------------------------------------------
// Read the projector
//---------------------------------------------------------------------
void C_Knob::ReadPROJ(SStream *str)
{ if (0 == mgg) gtfo("Knob: need mother gauge");
mgg->DecodePROJ(str,quad,1);
//--- compute top left corner ------------------
x1 = GetLefPos(quad);
y1 = GetTopPos(quad);
wd = GetWIDTH(quad);
ht = GetHEIGHT(quad);
x2 = x1 + wd;
y2 = y1 + ht;
vOfs = mgg->FixRoom(4);
rotn.SetVTAB(quad);
rotn.SetVBO(vOfs);
return;
}
//---------------------------------------------------------------------
// Read
//---------------------------------------------------------------------
int CDigit::Read(SStream *str, Tag tag)
{ if (0 == mgg) gtfo("CDigit: Mother gauge needed");
switch (tag) {
//--- Get position ------------------
case 'posn':
mgg->DecodeCADR(str,quad,1);
return TAG_READ;
//--- GetProjector ------------------
case 'proj':
mgg->DecodePROJ(str,quad,1);
return TAG_READ;
//--- Integer digit -----------------
case 'idig':
type = 0;
return TAG_READ;
//--- Partial digit -----------------
case 'pdig':
type = 1;
return TAG_READ;
}
return TAG_IGNORED;
}
//---------------------------------------------------------------------
// Read all parameters
//---------------------------------------------------------------------
int CNeedleMark::Read(SStream *stream, Tag tag)
{ if (0 == mgg) gtfo("<CNeedleMark: need mother gauge");
switch (tag) {
case 'bmap':
nedl.SetGauge(mgg);
nedl.ReadBMAP(stream);
return TAG_READ;
//--- rotation center --------------
case 'rotc':
nedl.ReadROTC(stream);
return TAG_READ;
//--- minimum value ----------------
case 'dmin':
ReadFloat(&dmin, stream);
return TAG_READ;
//--- maximum value ----------------
case 'dmax':
ReadFloat(&dmax, stream);
return TAG_READ;
//--- Clamp values -----------------
case 'clmp':
ReadFloat(&dmin,stream);
ReadFloat(&dmax,stream);
return TAG_READ;
//--- Current value ----------------
case 'sang':
case 'dval':
ReadFloat(&dval,stream);
SaveValue(dval);
return TAG_READ;
//--- Knob -------------------------
case 'knob':
ReadKNOB(stream);
return TAG_READ;
}
WARNINGLOG("CNeedleMark: tag %s unknowned",TagToString(tag));
return TAG_IGNORED;
}
//======================================================================================
// CFuiAxis to assign Joystick axes
//======================================================================================
CFuiAxis::CFuiAxis(Tag idn, const char *filename)
:CFuiWindow(idn,filename,0,0,0)
{ char err[128];
sprintf(err,"Incorrect TEMPLATE file: %s",filename);
all = 1;
jsd = 0;
jsp = 0;
jsm = globals->jsm;
//---Locate components -----------------------------
asgWIN = (CFuiButton*) GetComponent('defa');
if (0 == asgWIN ) gtfo(err);
labWIN = (CFuiLabel*) GetComponent('?lbl');
if (0 == labWIN ) gtfo(err);
vehPOP = (CFuiPopupMenu*)GetComponent('type');
if (0 == vehPOP ) gtfo(err);
chkWIN = (CFuiCheckbox*) GetComponent('alla');
if (0 == chkWIN ) gtfo(err);
//--- Group box axes ------------------------------
gp1AXE = (CFuiGroupBox*) GetComponent('axes');
if (0 == gp1AXE) gtfo(err);
devAXE = (CFuiLabel*) gp1AXE->GetComponent('devn');
if (0 == devAXE) gtfo(err);
labAXE = (CFuiLabel*) gp1AXE->GetComponent('axen');
if (0 == labAXE) gtfo(err);
valAXE = (CFuiSlider*) gp1AXE->GetComponent('axev');
if (0 == valAXE) gtfo(err);
valAXE->SetProperty(FUI_NO_MOUSE);
invAXE = (CFuiCheckbox*)gp1AXE->GetComponent('chka');
if (0 == invAXE) gtfo(err);
//--- Group box tune -------------------------------
grpFOR = (CFuiGroupBox*) GetComponent('tune');
if (0 == grpFOR) gtfo(err);
minFOR = (CFuiButton*) GetComponent('opr-');
if (0 == minFOR ) gtfo(err);
plsFOR = (CFuiButton*) GetComponent('opr+');
if (0 == plsFOR ) gtfo(err);
//--- Neutral box ----------------------------------
labNEU = (CFuiLabel*) GetComponent('labN');
if (0 == labNEU ) gtfo(err);
valNEU = (CFuiSlider*) GetComponent('neut');
if (0 == valNEU ) gtfo(err);
//--- Button control -------------------------------
devPOP = (CFuiPopupMenu*)GetComponent('devl');
if (0 == devPOP ) gtfo(err);
grpHAT = (CFuiGroupBox*) GetComponent('hatg');
if (0 == grpHAT) gtfo(err);
chkHAT = (CFuiCheckbox*)grpHAT->GetComponent('useH');
if (0 == chkHAT) gtfo(err);
//--------------------------------------------------
axeBOX.SetParameters(this,'list',0,0);
butBOX.SetParameters(this,'butL',0,0);
//-----Init vehicle menu ---------------------------
jsm->CreateDevList(devMENU,16);
ShowNeutral();
chkWIN->SetState(all);
vehPOP->CreatePage(&vehMEN,vehMENU);
devPOP->CreatePage(&devMEN,devMENU);
SelectVehicle(0);
FillAxes(0);
AxeSelect(0);
ButtonList(0);
HatControl();
//----Allow for Joystick detection ------------------
if (jsm->IsBusy()) Close();
else { jsm->StartDetectMoves(WhenAxeMove,windowId);
jsm->StartDetectButton(WhenButtonClick,windowId);
}
}
//--------------------------------------------------------------
// Init the window
//--------------------------------------------------------------
void CFuiVehOption::ReadFinished()
{ CFuiWindow::ReadFinished();
if (0 == surface) gtfo("CFuiVehOption: no surface");
}
//--------------------------------------------------------------
// Adjust the texture rotation center
// Texture wd and ht must be present
//---------------------------------------------------------------
void CRotNeedle::SetCenter(double dx, double dy)
{ if (0 == quad) gtfo("<rotc> Gauge without dimension");
rotc.x = double(dx) / double(txd.wd);
rotc.y = double(1) - (double(dy) / double(txd.ht));
return;
}