static GtkWidget * mail_printer_create_custom_widget_cb (GtkPrintOperation *operation, AsyncContext *async_context) { EMailDisplay *display; EMailPartList *part_list; EMailPart *part; GtkWidget *widget; gtk_print_operation_set_custom_tab_label (operation, _("Headers")); display = E_MAIL_DISPLAY (async_context->web_view); part_list = e_mail_display_get_part_list (display); /* FIXME Hard-coding the part ID works for now but could easily * break silently. Need a less brittle way of extracting * specific parts by either MIME type or GType. */ part = e_mail_part_list_ref_part (part_list, ".message.headers"); widget = e_mail_print_config_headers_new (E_MAIL_PART_HEADERS (part)); g_object_unref (part); return widget; }
static GtkWidget * create_custom_widget (GtkPrintOperation *operation, PrintData *data) { GtkWidget *vbox, *hbox, *font, *label; gtk_print_operation_set_custom_tab_label (operation, "Other"); vbox = gtk_box_new (GTK_ORIENTATION_VERTICAL, 0); gtk_container_set_border_width (GTK_CONTAINER (vbox), 12); hbox = gtk_box_new (GTK_ORIENTATION_HORIZONTAL, 8); gtk_box_pack_start (GTK_BOX (vbox), hbox, FALSE, FALSE, 0); gtk_widget_show (hbox); label = gtk_label_new ("Font:"); gtk_box_pack_start (GTK_BOX (hbox), label, FALSE, FALSE, 0); gtk_widget_show (label); font = gtk_font_button_new_with_font (data->font); gtk_box_pack_start (GTK_BOX (hbox), font, FALSE, FALSE, 0); gtk_widget_show (font); data->font_button = font; return vbox; }
void a_print(VikWindow *vw, VikViewport *vvp) { /* TODO: make print_settings non-static when saving_settings_to_file is * implemented. Keep it static for now to retain settings for each * viking session */ static GtkPrintSettings *print_settings = NULL; GtkPrintOperation *print_oper; GtkPrintOperationResult res; PrintData data; print_oper = gtk_print_operation_new (); data.num_pages = 1; data.vw = vw; data.vvp = vvp; data.offset_x = 0; data.offset_y = 0; data.center = VIK_PRINT_CENTER_BOTH; data.use_full_page = FALSE; data.operation = print_oper; data.xmpp = vik_viewport_get_xmpp(vvp); data.ympp = vik_viewport_get_ympp(vvp); data.width = vik_viewport_get_width(vvp); data.height = vik_viewport_get_height(vvp); data.xres = data.yres = 230; /* FIXME */ if (print_settings != NULL) gtk_print_operation_set_print_settings (print_oper, print_settings); g_signal_connect (print_oper, "begin_print", G_CALLBACK (begin_print), &data); g_signal_connect (print_oper, "draw_page", G_CALLBACK (draw_page), &data); g_signal_connect (print_oper, "end-print", G_CALLBACK (end_print), &data); g_signal_connect (print_oper, "create-custom-widget", G_CALLBACK (create_custom_widget_cb), &data); gtk_print_operation_set_custom_tab_label (print_oper, _("Image Settings")); res = gtk_print_operation_run (print_oper, GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, GTK_WINDOW (vw), NULL); if (res == GTK_PRINT_OPERATION_RESULT_APPLY) { if (print_settings != NULL) g_object_unref (print_settings); print_settings = g_object_ref (gtk_print_operation_get_print_settings (print_oper)); } g_object_unref (print_oper); }
static GObject * print_job_create_custom_widget(GtkPrintOperation *operation, gpointer user_data) { PlannerPrintJob *job; PlannerPrintJobPriv *priv; job = (PlannerPrintJob *)user_data; priv = job->priv; gtk_print_operation_set_custom_tab_label(operation, _("Select views")); return G_OBJECT(print_dialog_create_page (NULL, NULL, priv->views)); }
static void photos_print_operation_init (PhotosPrintOperation *self) { GtkPrintSettings *settings; self->unit = GTK_UNIT_INCH; self->left_margin = 0.0; self->top_margin = 0.0; self->scale_factor = 100.0; settings = gtk_print_settings_new (); gtk_print_operation_set_print_settings (GTK_PRINT_OPERATION (self), settings); g_object_unref (settings); gtk_print_operation_set_custom_tab_label (GTK_PRINT_OPERATION (self), _("Image Settings")); gtk_print_operation_set_embed_page_setup (GTK_PRINT_OPERATION (self), TRUE); gtk_print_operation_set_n_pages (GTK_PRINT_OPERATION (self), 1); }
Print::Print(SPDocument *doc, SPItem *base) : _doc (doc), _base (base) { g_assert (_doc); g_assert (_base); _printop = gtk_print_operation_new (); // set up dialog title, based on document name gchar *jobname = _doc->name ? _doc->name : _("SVG Document"); Glib::ustring title = _("Print"); title += " "; title += jobname; gtk_print_operation_set_job_name (_printop, title.c_str()); // set up paper size to match the document size gtk_print_operation_set_unit (_printop, GTK_UNIT_POINTS); GtkPageSetup *page_setup = gtk_page_setup_new(); gdouble doc_width = sp_document_width(_doc) * PT_PER_PX; gdouble doc_height = sp_document_height(_doc) * PT_PER_PX; GtkPaperSize *paper_size = gtk_paper_size_new_custom("custom", "custom", doc_width, doc_height, GTK_UNIT_POINTS); gtk_page_setup_set_paper_size (page_setup, paper_size); #ifndef WIN32 gtk_print_operation_set_default_page_setup (_printop, page_setup); #endif gtk_print_operation_set_use_full_page (_printop, TRUE); // set up signals _workaround._doc = _doc; _workaround._base = _base; _workaround._tab = &_tab; g_signal_connect (_printop, "create-custom-widget", G_CALLBACK (create_custom_widget), _tab.gobj()); g_signal_connect (_printop, "begin-print", G_CALLBACK (begin_print), NULL); g_signal_connect (_printop, "draw-page", G_CALLBACK (draw_page), &_workaround); // build custom preferences tab gtk_print_operation_set_custom_tab_label (_printop, _("Rendering")); }
GtkPrintOperation * xviewer_print_operation_new (XviewerImage *image, GtkPrintSettings *print_settings, GtkPageSetup *page_setup) { GtkPrintOperation *print; XviewerPrintData *data; gint width, height; xviewer_debug (DEBUG_PRINTING); print = gtk_print_operation_new (); data = g_slice_new0 (XviewerPrintData); data->left_margin = 0; data->top_margin = 0; data->scale_factor = 100; data->image = g_object_ref (image); data->unit = GTK_UNIT_INCH; xviewer_image_get_size (image, &width, &height); if (page_setup == NULL) page_setup = gtk_page_setup_new (); if (height >= width) { gtk_page_setup_set_orientation (page_setup, GTK_PAGE_ORIENTATION_PORTRAIT); } else { gtk_page_setup_set_orientation (page_setup, GTK_PAGE_ORIENTATION_LANDSCAPE); } gtk_print_operation_set_print_settings (print, print_settings); gtk_print_operation_set_default_page_setup (print, page_setup); gtk_print_operation_set_n_pages (print, 1); gtk_print_operation_set_job_name (print, xviewer_image_get_caption (image)); gtk_print_operation_set_embed_page_setup (print, TRUE); g_signal_connect (print, "draw_page", G_CALLBACK (xviewer_print_draw_page), data); g_signal_connect (print, "create-custom-widget", G_CALLBACK (xviewer_print_create_custom_widget), data); g_signal_connect (print, "custom-widget-apply", G_CALLBACK (xviewer_print_custom_widget_apply), data); g_signal_connect (print, "end-print", G_CALLBACK (xviewer_print_end_print), data); g_signal_connect (print, "update-custom-widget", G_CALLBACK (xviewer_print_image_setup_update), data); gtk_print_operation_set_custom_tab_label (print, _("Image Settings")); return print; }
static GimpPDBStatusType print_image (gint32 image_ID, gboolean interactive, GError **error) { GtkPrintOperation *operation; GtkPrintOperationResult result; gchar *temp_proc; gint32 layer; PrintData data; /* create a print layer from the projection */ layer = gimp_layer_new_from_visible (image_ID, image_ID, PRINT_PROC_NAME); operation = gtk_print_operation_new (); gtk_print_operation_set_n_pages (operation, 1); print_operation_set_name (operation, image_ID); print_page_setup_load (operation, image_ID); /* fill in the PrintData struct */ data.image_id = image_ID; data.drawable_id = layer; data.unit = gimp_get_default_unit (); data.image_unit = gimp_image_get_unit (image_ID); data.offset_x = 0; data.offset_y = 0; data.center = CENTER_BOTH; data.use_full_page = FALSE; data.operation = operation; gimp_image_get_resolution (image_ID, &data.xres, &data.yres); print_settings_load (&data); gtk_print_operation_set_unit (operation, GTK_UNIT_PIXEL); g_signal_connect (operation, "begin-print", G_CALLBACK (begin_print), &data); g_signal_connect (operation, "draw-page", G_CALLBACK (draw_page), &data); g_signal_connect (operation, "end-print", G_CALLBACK (end_print), &image_ID); print_operation = operation; temp_proc = print_temp_proc_install (image_ID); gimp_extension_enable (); if (interactive) { gimp_ui_init (PLUG_IN_BINARY, FALSE); g_signal_connect_swapped (operation, "end-print", G_CALLBACK (print_settings_save), &data); g_signal_connect (operation, "create-custom-widget", G_CALLBACK (create_custom_widget), &data); gtk_print_operation_set_custom_tab_label (operation, _("Image Settings")); result = gtk_print_operation_run (operation, GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG, NULL, error); } else { result = gtk_print_operation_run (operation, GTK_PRINT_OPERATION_ACTION_PRINT, NULL, error); } gimp_uninstall_temp_proc (temp_proc); g_free (temp_proc); print_operation = NULL; g_object_unref (operation); if (gimp_drawable_is_valid (layer)) gimp_drawable_delete (layer); switch (result) { case GTK_PRINT_OPERATION_RESULT_APPLY: case GTK_PRINT_OPERATION_RESULT_IN_PROGRESS: return GIMP_PDB_SUCCESS; case GTK_PRINT_OPERATION_RESULT_CANCEL: return GIMP_PDB_CANCEL; case GTK_PRINT_OPERATION_RESULT_ERROR: return GIMP_PDB_EXECUTION_ERROR; } return GIMP_PDB_EXECUTION_ERROR; }
int PrintText(const char *name, gchar *text) { GKeyFile *conf = GetConf(); GtkPrintOperation *prt; const gchar *font; GtkPageSetup *page_setup = NULL; GtkPrintSettings *print_settings = NULL; if(!text) return -EINVAL; prt = gtk_print_operation_new(); if(!prt) return -1; // Set job parameters g_object_set_data_full(G_OBJECT(prt),"3270Text",g_strsplit(g_strchomp(text),"\n",-1),(void (*)(gpointer)) g_strfreev); // Set print font = GetString("Print","Font",""); if(!*font) font = GetString("Terminal","Font","Courier"); g_object_set_data_full(G_OBJECT(prt),"3270FontName",g_strdup(font),g_free); // Configure print operation gtk_print_operation_set_job_name(prt,name); gtk_print_operation_set_allow_async(prt,0); gtk_print_operation_set_show_progress(prt,1); gtk_print_operation_set_custom_tab_label(prt,_( "Font" )); g_signal_connect(prt, "begin-print", G_CALLBACK(begin_print), 0); g_signal_connect(prt, "draw-page", G_CALLBACK(draw_page), 0); #ifdef HAVE_PRINT_FONT_DIALOG g_signal_connect(prt, "create-custom-widget", G_CALLBACK(create_custom_widget), 0); g_signal_connect(prt, "custom-widget-apply", G_CALLBACK(custom_widget_apply), 0); #endif g_signal_connect(prt, "done", G_CALLBACK(print_done), 0); if(conf) { #if GTK_CHECK_VERSION(2,12,0) gchar *ptr = g_key_file_get_string(conf,"Print Settings","output-uri",NULL); if(ptr) { gchar *uri = NULL; switch(*(ptr++)) { case '$': if(g_str_has_prefix(ptr,"home/")) uri = g_strdup_printf("file:///%s/%s",g_get_home_dir(),ptr+5); #if GTK_CHECK_VERSION(2,14,0) else if(g_str_has_prefix(ptr,"documents/")) uri = g_strdup_printf("file:///%s/%s",g_get_user_special_dir(G_USER_DIRECTORY_DOCUMENTS),ptr+10); else if(g_str_has_prefix(ptr,"desktop/")) uri = g_strdup_printf("file:///%s/%s",g_get_user_special_dir(G_USER_DIRECTORY_DESKTOP),ptr+8); #endif break; case '~': uri = g_strdup_printf("file:///%s/%s",g_get_home_dir(),ptr); break; } if(uri) { g_key_file_set_string(conf,"Print Settings","output-uri",uri); g_free(uri); } } print_settings = gtk_print_settings_new_from_key_file(conf,NULL,NULL); page_setup = gtk_page_setup_new_from_key_file(conf,NULL,NULL); if(!page_setup) page_setup = gtk_page_setup_new(); #else // GTK_CHECK_VERSION(2,12,0) print_settings = gtk_print_settings_new(); if(print_settings) { gchar **list; int f; list = g_key_file_get_keys(conf,"PrintSettings",NULL,NULL); if(list) { for(f=0;list[f];f++) gtk_print_settings_set(print_settings,list[f],g_key_file_get_string(conf,"PrintSettings",list[f],NULL)); g_strfreev(list); } } page_setup = gtk_page_setup_new(); #endif } else { page_setup = gtk_page_setup_new(); gtk_print_operation_set_print_settings(prt,gtk_print_settings_new()); } Trace("page_setup: %p print_settings: %p",page_setup,print_settings); gtk_print_operation_set_print_settings(prt,print_settings); gtk_print_operation_set_default_page_setup(prt,page_setup); // Run Print dialog gtk_print_operation_run(prt,GTK_PRINT_OPERATION_ACTION_PRINT_DIALOG,GTK_WINDOW(topwindow),NULL); g_object_unref(prt); return 0; }
static GtkWidget *create_custom_widget(GtkPrintOperation *operation, gpointer user_data) { /* copied from interface.c */ GtkWidget *page; GtkWidget *frame33; GtkWidget *alignment36; GtkWidget *vbox30; GtkWidget *hbox10; GtkWidget *label203; PrintWidgets *w = user_data; gtk_print_operation_set_custom_tab_label(operation, _("Document Setup")); page = gtk_vbox_new(FALSE, 0); gtk_container_set_border_width(GTK_CONTAINER(page), 5); w->check_print_linenumbers = gtk_check_button_new_with_mnemonic(_("Print line numbers")); gtk_box_pack_start(GTK_BOX(page), w->check_print_linenumbers, FALSE, FALSE, 0); gtk_widget_set_tooltip_text(w->check_print_linenumbers, _("Add line numbers to the printed page")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(w->check_print_linenumbers), printing_prefs.print_line_numbers); w->check_print_pagenumbers = gtk_check_button_new_with_mnemonic(_("Print page numbers")); gtk_box_pack_start(GTK_BOX(page), w->check_print_pagenumbers, FALSE, FALSE, 0); gtk_widget_set_tooltip_text(w->check_print_pagenumbers, _("Add page numbers at the bottom of each page. It takes 2 lines of the page.")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(w->check_print_pagenumbers), printing_prefs.print_page_numbers); w->check_print_pageheader = gtk_check_button_new_with_mnemonic(_("Print page header")); gtk_box_pack_start(GTK_BOX(page), w->check_print_pageheader, FALSE, FALSE, 0); gtk_widget_set_tooltip_text(w->check_print_pageheader, _("Add a little header to every page containing the page number, the filename and the current date (see below). It takes 3 lines of the page.")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(w->check_print_pageheader), printing_prefs.print_page_header); g_signal_connect(w->check_print_pageheader, "toggled", G_CALLBACK(on_page_header_toggled), w); frame33 = gtk_frame_new(NULL); gtk_box_pack_start(GTK_BOX(page), frame33, FALSE, FALSE, 0); gtk_frame_set_label_align(GTK_FRAME(frame33), 0, 0); gtk_frame_set_shadow_type(GTK_FRAME(frame33), GTK_SHADOW_NONE); alignment36 = gtk_alignment_new(0, 0.5, 1, 1); gtk_container_add(GTK_CONTAINER(frame33), alignment36); gtk_alignment_set_padding(GTK_ALIGNMENT(alignment36), 0, 0, 12, 0); vbox30 = gtk_vbox_new(FALSE, 1); gtk_container_add(GTK_CONTAINER(alignment36), vbox30); w->check_print_basename = gtk_check_button_new_with_mnemonic(_("Use the basename of the printed file")); gtk_box_pack_start(GTK_BOX(vbox30), w->check_print_basename, FALSE, FALSE, 0); gtk_widget_set_tooltip_text(w->check_print_basename, _("Print only the basename(without the path) of the printed file")); gtk_toggle_button_set_active(GTK_TOGGLE_BUTTON(w->check_print_basename), printing_prefs.page_header_basename); hbox10 = gtk_hbox_new(FALSE, 5); gtk_box_pack_start(GTK_BOX(vbox30), hbox10, TRUE, TRUE, 0); label203 = gtk_label_new(_("Date format:")); gtk_box_pack_start(GTK_BOX(hbox10), label203, FALSE, FALSE, 0); w->entry_print_dateformat = gtk_entry_new(); ui_entry_add_clear_icon(GTK_ENTRY(w->entry_print_dateformat)); gtk_box_pack_start(GTK_BOX(hbox10), w->entry_print_dateformat, TRUE, TRUE, 0); gtk_widget_set_tooltip_text(w->entry_print_dateformat, _("Specify a format for the date and time stamp which is added to the page header on each page. You can use any conversion specifiers which can be used with the ANSI C strftime function.")); gtk_entry_set_text(GTK_ENTRY(w->entry_print_dateformat), printing_prefs.page_header_datefmt); on_page_header_toggled(GTK_TOGGLE_BUTTON(w->check_print_pageheader), w); gtk_widget_show_all(page); return page; }