void gzp_init()
{
uint8_t system_address[GZP_SYSTEM_ADDRESS_WIDTH];
// Read "chip id", of which 4 bytes (GZP_SYSTEM_ADDRESS_WIDTH)
// are used as system address
gzp_host_chip_id_read(system_address, GZP_SYSTEM_ADDRESS_WIDTH);
// Set up radio parameters (addresses and channel subset) from system_address
gzp_update_radio_params(system_address);
// Only "data pipe" enabled by default
gzll_set_param(GZLL_PARAM_RX_PIPES, gzll_get_param(GZLL_PARAM_RX_PIPES) | (1 << GZP_DATA_PIPE));
gzp_pairing_enabled_f = false;
gzp_address_exchanged_f = false;
gzp_id_req_stat = GZP_ID_REQ_IDLE;
gzp_encrypted_user_data_length = 0;
// Infinite RX timeout
gzll_set_param(GZLL_PARAM_RX_TIMEOUT, 0);
}
static void gzp_process_address_req(uint8_t* gzp_req)
{
uint8_t temp_rx_pipes, temp_host_mode;
uint8_t pairing_resp[GZP_CMD_HOST_ADDRESS_RESP_PAYLOAD_LENGTH];
gzp_address_exchanged_f = false;
gzll_goto_idle();
temp_rx_pipes = gzll_get_param(GZLL_PARAM_RX_PIPES);
temp_host_mode = gzll_get_param(GZLL_PARAM_HOST_MODE);
// If requesting Device within close proximity
if(gzll_rx_power_high())
{
gzll_set_param(GZLL_PARAM_RX_PIPES, 0);
gzll_set_param(GZLL_PARAM_HOST_MODE, 0);
gzll_set_param(GZLL_PARAM_RX_TIMEOUT, GZP_CLOSE_PROXIMITY_BACKOFF_RX_TIMEOUT);
gzll_rx_fifo_flush();
// Start "proximity" back off period
gzll_rx_start();
while(gzll_get_state() != GZLL_IDLE)
;
// Build pairing response packet
pairing_resp[0] = GZP_CMD_HOST_ADDRESS_RESP;
gzp_host_chip_id_read(&pairing_resp[GZP_CMD_HOST_ADDRESS_RESP_ADDRESS], GZP_SYSTEM_ADDRESS_WIDTH);
gzll_ack_payload_write(&pairing_resp[0], GZP_CMD_HOST_ADDRESS_RESP_PAYLOAD_LENGTH, 0);
gzll_set_param(GZLL_PARAM_RX_TIMEOUT, GZP_STEP1_RX_TIMEOUT);
// Enable only pairing pipe when waiting for pairing request step 1
gzll_set_param(GZLL_PARAM_RX_PIPES, (1 << GZP_PAIRING_PIPE));
gzll_rx_start();
while(gzll_get_state() != GZLL_IDLE)
{
if(gzll_rx_fifo_read(&gzp_req[0], NULL, NULL))
{
// Validate step 1 of pairing request
if(gzp_req[0] == GZP_CMD_HOST_ADDRESS_FETCH)
{
gzp_address_exchanged_f = true;
}
}
}
gzll_tx_fifo_flush();
gzll_rx_fifo_flush();
gzll_set_param(GZLL_PARAM_RX_TIMEOUT, 0);
gzll_set_param(GZLL_PARAM_RX_PIPES, temp_rx_pipes);
gzll_set_param(GZLL_PARAM_HOST_MODE, temp_host_mode);
// Return to normal operation
gzll_rx_start();
}
else
{
gzll_set_param(GZLL_PARAM_RX_PIPES, temp_rx_pipes & ~(1 << GZP_PAIRING_PIPE));
gzll_set_param(GZLL_PARAM_RX_TIMEOUT, GZP_NOT_PROXIMITY_BACKOFF_RX_TIMEOUT);
// Start "not proximity" backoff period
gzll_rx_start();
}
}
static void gzp_process_address_req(uint8_t* gzp_req)
{
uint8_t temp_rx_pipes;
uint8_t pairing_resp[GZP_CMD_HOST_ADDRESS_RESP_PAYLOAD_LENGTH];
uint32_t rx_payload_length = NRF_GZLL_CONST_MAX_PAYLOAD_LENGTH;
gzp_address_exchanged_f = false;
gzll_goto_idle();
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
temp_rx_pipes = nrf_gzll_get_rx_pipes_enabled();
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
// If requesting Device within close proximity
if(prev_gzp_rx_info.rssi >= GZP_HOST_RX_POWER_THRESHOLD)
{
(void)nrf_gzll_set_rx_pipes_enabled(0);
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
gzll_set_rx_timeout(GZP_CLOSE_PROXIMITY_BACKOFF_RX_TIMEOUT);
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
gzll_rx_fifo_flush();
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
// Start "proximity" back off period
gzll_rx_start();
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
while(nrf_gzll_is_enabled())
{}
// Build pairing response packet
pairing_resp[0] = (uint8_t)GZP_CMD_HOST_ADDRESS_RESP;
gzp_host_chip_id_read(&pairing_resp[GZP_CMD_HOST_ADDRESS_RESP_ADDRESS], GZP_SYSTEM_ADDRESS_WIDTH);
(void)nrf_gzll_add_packet_to_tx_fifo(0, &pairing_resp[0], GZP_CMD_HOST_ADDRESS_RESP_PAYLOAD_LENGTH);
ASSERT(nrf_gzll_get_error_code() == NRF_GZLL_ERROR_CODE_NO_ERROR);
gzll_set_rx_timeout(GZP_STEP1_RX_TIMEOUT);
// Enable only pairing pipe when waiting for pairing request step 1
(void)nrf_gzll_set_rx_pipes_enabled((1 << GZP_PAIRING_PIPE));
gzll_rx_start();
while(nrf_gzll_is_enabled())
{
if(nrf_gzll_get_rx_fifo_packet_count(GZP_PAIRING_PIPE))
{
(void)nrf_gzll_fetch_packet_from_rx_fifo(GZP_PAIRING_PIPE, &gzp_req[0], &rx_payload_length);
// Validate step 1 of pairing request
if(gzp_req[0] == (uint8_t)GZP_CMD_HOST_ADDRESS_FETCH)
{
gzp_address_exchanged_f = true;
}
}
}
gzll_tx_fifo_flush();
gzll_rx_fifo_flush();
gzll_set_rx_timeout(0);
(void)nrf_gzll_set_rx_pipes_enabled(temp_rx_pipes);
// Return to normal operation
gzll_rx_start();
}
else
{
(void)nrf_gzll_set_rx_pipes_enabled(temp_rx_pipes & ~(1 << GZP_PAIRING_PIPE));
gzll_set_rx_timeout(GZP_NOT_PROXIMITY_BACKOFF_RX_TIMEOUT);
// Start "not proximity" backoff period
gzll_rx_start();
}
}
