C++ (Cpp) h_u32_to_beの例

コード例 #1

ファイル: fileio.c プロジェクト: 01org/CODK-A-Flashpack

int fileio_write_u32(struct fileio *fileio_p, uint32_t data)
{
	uint8_t buf[4];
	h_u32_to_be(buf, data);
	size_t size_written;
	int retval = fileio_write(fileio_p, 4, buf, &size_written);
	if (ERROR_OK == retval && size_written != sizeof(uint32_t))
		retval = -EIO;

	return retval;
}

コード例 #2

ファイル: fileio.c プロジェクト: unnamet/estick-jtag

int fileio_write_u32(fileio_t *fileio, u32 data)
{
	u8 buf[4];
	u32 size_written;
	int retval;
	
	h_u32_to_be(buf, data);
	
	if ((retval = fileio_local_write(fileio, 4, buf, &size_written)) != ERROR_OK)
		return retval;
	
	return ERROR_OK;
}

コード例 #3

ファイル: jtagspi.c プロジェクト: jfischer-phytec-iot/openocd

static int jtagspi_cmd(struct flash_bank *bank, uint8_t cmd,
		uint32_t *addr, uint8_t *data, int len)
{
	struct jtagspi_flash_bank *info = bank->driver_priv;
	struct scan_field fields[6];
	uint8_t marker = 1;
	uint8_t xfer_bits_buf[4];
	uint8_t addr_buf[3];
	uint8_t *data_buf;
	uint32_t xfer_bits;
	int is_read, lenb, n;

	/* LOG_DEBUG("cmd=0x%02x len=%i", cmd, len); */

	is_read = (len < 0);
	if (is_read)
		len = -len;

	n = 0;

	fields[n].num_bits = 1;
	fields[n].out_value = &marker;
	fields[n].in_value = NULL;
	n++;

	xfer_bits = 8 + len - 1;
	/* cmd + read/write - 1 due to the counter implementation */
	if (addr)
		xfer_bits += 24;
	h_u32_to_be(xfer_bits_buf, xfer_bits);
	flip_u8(xfer_bits_buf, xfer_bits_buf, 4);
	fields[n].num_bits = 32;
	fields[n].out_value = xfer_bits_buf;
	fields[n].in_value = NULL;
	n++;

	cmd = flip_u32(cmd, 8);
	fields[n].num_bits = 8;
	fields[n].out_value = &cmd;
	fields[n].in_value = NULL;
	n++;

	if (addr) {
		h_u24_to_be(addr_buf, *addr);
		flip_u8(addr_buf, addr_buf, 3);
		fields[n].num_bits = 24;
		fields[n].out_value = addr_buf;
		fields[n].in_value = NULL;
		n++;
	}

	lenb = DIV_ROUND_UP(len, 8);
	data_buf = malloc(lenb);
	if (lenb > 0) {
		if (data_buf == NULL) {
			LOG_ERROR("no memory for spi buffer");
			return ERROR_FAIL;
		}
		if (is_read) {
			fields[n].num_bits = jtag_tap_count_enabled();
			fields[n].out_value = NULL;
			fields[n].in_value = NULL;
			n++;

			fields[n].out_value = NULL;
			fields[n].in_value = data_buf;
		} else {
			flip_u8(data, data_buf, lenb);
			fields[n].out_value = data_buf;
			fields[n].in_value = NULL;
		}
		fields[n].num_bits = len;
		n++;
	}

	jtagspi_set_ir(bank);
	/* passing from an IR scan to SHIFT-DR clears BYPASS registers */
	jtag_add_dr_scan(info->tap, n, fields, TAP_IDLE);
	jtag_execute_queue();

	if (is_read)
		flip_u8(data_buf, data, lenb);
	free(data_buf);
	return ERROR_OK;
}

コード例 #4

ファイル: arm_jtag.c プロジェクト: unnamet/estick-jtag

/* read JTAG buffer into big-endian u32 */
int arm_jtag_buf_to_be32(u8 *in_buf, void *priv, struct scan_field_s *field)
{
    h_u32_to_be(((u8*)priv), le_to_h_u32(in_buf));
    return ERROR_OK;
}