int main(void){ // stop watchdog timer WDTCTL = WDTPW + WDTHOLD; //Initialize clock and peripherals halBoardInit(); halBoardStartXT1(); halBoardSetSystemClock(SYSCLK_16MHZ); // Debug UART halUsbInit(); // show off doLCD(); // init LEDs LED_PORT_OUT |= LED_1 | LED_2; LED_PORT_DIR |= LED_1 | LED_2; /// GET STARTED /// btstack_memory_init(); run_loop_init(RUN_LOOP_EMBEDDED); // init HCI hci_transport_t * transport = hci_transport_h4_dma_instance(); bt_control_t * control = bt_control_cc256x_instance(); hci_uart_config_t * config = hci_uart_config_cc256x_instance(); remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); // use eHCILL bt_control_cc256x_enable_ehcill(1); // init L2CAP l2cap_init(); l2cap_register_packet_handler(packet_handler); // ready - enable irq used in h4 task __enable_interrupt(); // turn on! hci_power_control(HCI_POWER_ON); // go! run_loop_execute(); return 0; }
static void hw_setup(){ // stop watchdog timer WDTCTL = WDTPW + WDTHOLD; //Initialize clock and peripherals halBoardInit(); halBoardStartXT1(); halBoardSetSystemClock(SYSCLK_16MHZ); // init debug UART halUsbInit(); // init LEDs LED_PORT_OUT |= LED_1 | LED_2; LED_PORT_DIR |= LED_1 | LED_2; // ready - enable irq used in h4 task __enable_interrupt(); }
// main int main(void) { // stop watchdog timer WDTCTL = WDTPW + WDTHOLD; //Initialize clock and peripherals halBoardInit(); halBoardStartXT1(); halBoardSetSystemClock(SYSCLK_16MHZ); // init debug UART halUsbInit(); // init LEDs LED_PORT_OUT |= LED_1 | LED_2; LED_PORT_DIR |= LED_1 | LED_2; /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_EMBEDDED); // init HCI hci_transport_t * transport = hci_transport_h4_dma_instance(); bt_control_t * control = bt_control_cc256x_instance(); hci_uart_config_t * config = hci_uart_config_cc256x_instance(); remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); // use eHCILL bt_control_cc256x_enable_ehcill(1); // init L2CAP l2cap_init(); l2cap_register_packet_handler(packet_handler); // init RFCOMM rfcomm_init(); rfcomm_register_packet_handler(packet_handler); rfcomm_register_service_with_initial_credits_internal(NULL, rfcomm_channel_nr, 100, 1); // reserved channel, mtu=100, 1 credit // init SDP, create record for SPP and register with SDP sdp_init(); memset(spp_service_buffer, 0, sizeof(spp_service_buffer)); service_record_item_t * service_record_item = (service_record_item_t *) spp_service_buffer; sdp_create_spp_service( (uint8_t*) &service_record_item->service_record, 1, "SPP Counter"); printf("SDP service buffer size: %u\n\r", (uint16_t) (sizeof(service_record_item_t) + de_get_len((uint8_t*) &service_record_item->service_record))); sdp_register_service_internal(NULL, service_record_item); // set one-shot timer timer_source_t heartbeat; heartbeat.process = &heartbeat_handler; run_loop_set_timer(&heartbeat, HEARTBEAT_PERIOD_MS); run_loop_add_timer(&heartbeat); puts("SPP FlowControl Demo: simulates processing on received data...\n\r"); // ready - enable irq used in h4 task __enable_interrupt(); // turn on! hci_power_control(HCI_POWER_ON); // go! run_loop_execute(); // happy compiler! return 0; }
// main int main(void) { // stop watchdog timer WDTCTL = WDTPW + WDTHOLD; //Initialize clock and peripherals halBoardInit(); halBoardStartXT1(); halBoardSetSystemClock(SYSCLK_16MHZ); // init debug UART halUsbInit(); // init LEDs P1OUT |= LED_1 | LED_2; P1DIR |= LED_1 | LED_2; /*//init linkLED P1OUT &= ~BIT0; P1DIR |= BIT0;*/ //Setup Input Port 2 initSwitch(2, BIT0); initSwitch(2, BIT1); initSwitch(2, BIT2); initSwitch(2, BIT3); //tie port3 and unused pins of port 2 /*P3OUT = 0; P3DIR = 0xFF; P3SEL = 0; P2OUT &= 0x0F; P2DIR |= 0xF0; P2SEL &= 0x0F;*/ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_EMBEDDED); // add gpio port 2 to run loop // default values port2_status = P2IN & 0x0F; data_source_t data_src_port2; data_src_port2.process = port2_poll; data_src_port2.fd = 0; run_loop_add_data_source(&data_src_port2); // init HCI hci_transport_t * transport = hci_transport_h4_dma_instance(); bt_control_t * control = bt_control_cc256x_instance(); hci_uart_config_t * config = hci_uart_config_cc256x_instance(); remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); // use eHCILL bt_control_cc256x_enable_ehcill(1); // init L2CAP l2cap_init(); l2cap_register_packet_handler(bt_packet_handler); l2cap_register_service_internal(NULL, l2cap_packet_handler, 0x1001, L2CAP_MINIMAL_MTU); // ready - enable irq used in h4 task __enable_interrupt(); // turn on! if(hci_power_control(HCI_POWER_ON)) printf("power on failed"); //init i2c initi2c(); // go! run_loop_execute(); // happy compiler! return 0; }