int main(int argc, const char * argv[]){ /// GET STARTED with BTstack /// btstack_memory_init(); btstack_run_loop_init(btstack_run_loop_posix_get_instance()); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI hci_init(hci_transport_usb_instance(), NULL); hci_set_link_key_db(btstack_link_key_db_fs_instance()); // inform about BTstack state hci_event_callback_registration.callback = &packet_handler; hci_add_event_handler(&hci_event_callback_registration); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app btstack_main(argc, argv); // go btstack_run_loop_execute(); return 0; }
void setup(void){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/gatt_browser.pklg", HCI_DUMP_PACKETLOGGER); // init HCI remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; bt_control_t * control = NULL; #ifndef HAVE_UART_CC2564 hci_transport_t * transport = hci_transport_usb_instance(); #else hci_transport_t * transport = hci_transport_h4_instance(); control = bt_control_cc256x_instance(); // config.device_name = "/dev/tty.usbserial-A600eIDu"; // 5438 config.device_name = "/dev/tty.usbserial-A800cGd0"; // 5529 config.baudrate_init = 115200; config.baudrate_main = 0; config.flowcontrol = 1; #endif hci_init(transport, &config, control, remote_db); l2cap_init(); l2cap_register_packet_handler(&handle_hci_event); gatt_client_init(); gatt_client_register_packet_handler(&handle_gatt_client_event); sm_init(); sm_set_io_capabilities(IO_CAPABILITY_NO_INPUT_NO_OUTPUT); }
int main(int argc, const char * argv[]){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_fs; hci_init(transport, config, control, remote_db); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app btstack_main(argc, argv); // go run_loop_execute(); return 0; }
void setup(void){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); hci_discoverable_control(1); l2cap_init(); l2cap_register_packet_handler(packet_handler); rfcomm_init(); rfcomm_register_packet_handler(packet_handler); rfcomm_register_service_internal(NULL, RFCOMM_SERVER_CHANNEL, 100); // reserved channel, mtu=100 // init SDP, create record for SPP and register with SDP sdp_init(); memset(spp_service_buffer, 0, sizeof(spp_service_buffer)); // service_record_item_t * service_record_item = (service_record_item_t *) spp_service_buffer; // sdp_create_spp_service( (uint8_t*) &service_record_item->service_record, RFCOMM_SERVER_CHANNEL, "SPP Counter"); // printf("SDP service buffer size: %u\n\r", (uint16_t) (sizeof(service_record_item_t) + de_get_len((uint8_t*) &service_record_item->service_record))); // sdp_register_service_internal(NULL, service_record_item); sdp_create_spp_service( spp_service_buffer, RFCOMM_SERVER_CHANNEL, "SPP Counter"); printf("SDP service record size: %u\n\r", de_get_len(spp_service_buffer)); sdp_register_service_internal(NULL, spp_service_buffer); }
void setup(void){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); // set up l2cap_le l2cap_init(); l2cap_register_fixed_channel(att_packet_handler, L2CAP_CID_ATTRIBUTE_PROTOCOL); l2cap_register_fixed_channel(sm_packet_handler, L2CAP_CID_SECURITY_MANAGER_PROTOCOL); l2cap_register_packet_handler(packet_handler); // set up ATT att_set_db(profile_data); att_set_write_callback(att_write_callback); att_dump_attributes(); att_connection.mtu = 27; }
int main(int argc, const char * argv[]){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // pick serial port hci_uart_config_cc256x.device_name = "/dev/tty.usbserial-AD025KU2"; // init HCI hci_transport_t * transport = hci_transport_h4_instance(); bt_control_t * control = bt_control_stlc2500d_instance(); remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_fs; hci_init(transport, (void*) &hci_uart_config_cc256x, control, remote_db); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app btstack_main(argc, argv); // go run_loop_execute(); return 0; }
// main int app_main(void){ printf("BTstack: setup\n"); // enable packet logger hci_dump_open(NULL, HCI_DUMP_STDOUT); /// GET STARTED with BTstack /// btstack_memory_init(); btstack_run_loop_init(btstack_run_loop_freertos_get_instance()); // init HCI hci_init(transport_get_instance(), NULL); // setup TLV ESP32 implementation const btstack_tlv_t * btstack_tlv_impl = btstack_tlv_esp32_get_instance(); // setup Link Key DB using TLV const btstack_link_key_db_t * btstack_link_key_db = btstack_link_key_db_tlv_get_instance(btstack_tlv_impl, NULL); hci_set_link_key_db(btstack_link_key_db); // setup LE Device DB using TLV le_device_db_tlv_configure(btstack_tlv_impl, NULL); // inform about BTstack state hci_event_callback_registration.callback = &packet_handler; hci_add_event_handler(&hci_event_callback_registration); btstack_main(0, NULL); printf("BTstack: execute run loop\n"); btstack_run_loop_execute(); return 0; }
static void daemon_set_logging_enabled(int enabled){ if (enabled && !loggingEnabled){ // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); } if (!enabled && loggingEnabled){ hci_dump_close(); } loggingEnabled = enabled; }
void BTSTACK_Initialize ( void ) { printf("\n\nBTstack_Initialize()\n"); btstack_memory_init(); run_loop_init(RUN_LOOP_EMBEDDED); hci_dump_open(NULL, HCI_DUMP_STDOUT); hci_transport_t * transport = hci_transport_h4_dma_instance(); bt_control_t * control = bt_control_csr_instance(); hci_init(transport, (void*) &hci_uart_config_csr, control, NULL); // hci_power_control(HCI_POWER_ON); btstack_main(0, NULL); }
int main(int argc, const char * argv[]){ /// GET STARTED with BTstack /// btstack_memory_init(); btstack_run_loop_init(btstack_run_loop_posix_get_instance()); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // pick serial port // config.device_name = "/dev/tty.usbserial-A900K2WS"; // DFROBOT // config.device_name = "/dev/tty.usbserial-A50285BI"; // BOOST-CC2564MODA New // config.device_name = "/dev/tty.usbserial-A9OVNX5P"; // RedBear IoT pHAT breakout board config.device_name = "/dev/tty.usbserial-A900K0VK"; // CSR8811 breakout board // init HCI const btstack_uart_block_t * uart_driver = btstack_uart_block_posix_instance(); const hci_transport_t * transport = hci_transport_h5_instance(uart_driver); const btstack_link_key_db_t * link_key_db = btstack_link_key_db_fs_instance(); hci_init(transport, (void*) &config); hci_set_link_key_db(link_key_db); // enable BCSP mode for CSR chipsets - auto detect might not work // hci_transport_h5_enable_bcsp_mode(); // set BD_ADDR for CSR without Flash/unique address // bd_addr_t own_address = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66}; // btstack_chipset_csr_set_bd_addr(own_address); // enable auto-sleep mode // hci_transport_h5_set_auto_sleep(300); // register for HCI events hci_event_callback_registration.callback = &packet_handler; hci_add_event_handler(&hci_event_callback_registration); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app btstack_main(argc, argv); // go btstack_run_loop_execute(); return 0; }
void setup(void){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); hci_register_packet_handler(packet_handler); }
void setup(void){ /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // init HCI #ifdef HAVE_UART_CSR hci_transport_t * transport = hci_transport_h4_instance(); hci_uart_config_t * config = &hci_uart_config; bt_control_t * control = bt_control_csr_instance(); #elif defined(HAVE_UART_CC256x) hci_transport_t * transport = hci_transport_h4_instance(); hci_uart_config_t * config = &hci_uart_config; bt_control_t * control = bt_control_cc256x_instance(); #else hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; #endif remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); // set up l2cap_le l2cap_init(); // setup central device db central_device_db_init(); // setup SM: Display only sm_init(); sm_set_io_capabilities(IO_CAPABILITY_DISPLAY_ONLY); sm_set_authentication_requirements( SM_AUTHREQ_BONDING | SM_AUTHREQ_MITM_PROTECTION); // setup ATT server att_server_init(profile_data, att_read_callback, att_write_callback); att_write_queue_init(); att_attributes_init(); att_server_register_packet_handler(app_packet_handler); att_dump_attributes(); }
void BTSTACK_Initialize ( void ) { printf("\n\nBTstack_Initialize()\n"); btstack_memory_init(); btstack_run_loop_init(btstack_run_loop_embedded_get_instance()); hci_dump_open(NULL, HCI_DUMP_STDOUT); const hci_transport_t * transport = hci_transport_h4_instance(); hci_init(transport, &config); hci_set_chipset(btstack_chipset_csr_instance()); // inform about BTstack state hci_event_callback_registration.callback = &packet_handler; hci_add_event_handler(&hci_event_callback_registration); btstack_main(0, NULL); }
static void btstack_setup(){ /// GET STARTED /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); hci_dump_open("/tmp/hci_dump_sdp_rfcomm_query.pklg", HCI_DUMP_PACKETLOGGER); hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); printf("Client HCI init done\r\n"); // init L2CAP l2cap_init(); l2cap_register_packet_handler(packet_handler); // turn on! hci_power_control(HCI_POWER_ON); }
int main(int argc, const char * argv[]){ /// GET STARTED with BTstack /// btstack_memory_init(); btstack_run_loop_init(btstack_run_loop_posix_get_instance()); // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); // pick serial port config.device_name = "/dev/tty.usbserial-A900K0VK"; // init HCI const btstack_uart_block_t * uart_driver = btstack_uart_block_posix_instance(); const hci_transport_t * transport = hci_transport_h4_instance(uart_driver); const btstack_link_key_db_t * link_key_db = btstack_link_key_db_fs_instance(); hci_init(transport, (void*) &config); hci_set_link_key_db(link_key_db); // inform about BTstack state hci_event_callback_registration.callback = &packet_handler; hci_add_event_handler(&hci_event_callback_registration); // setup dynamic chipset driver setup hci_set_local_version_information_callback(&local_version_information_callback); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app btstack_main(argc, argv); // go btstack_run_loop_execute(); return 0; }
void btstack_libusb_device_base::init() { /// GET STARTED with BTstack /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); hci_dump_open( nullptr, HCI_DUMP_STDOUT ); // init HCI hci_init( hci_transport_usb_instance(), nullptr, nullptr, nullptr ); // handle CTRL-c signal(SIGINT, sigint_handler); // setup app hci_register_packet_handler( &btstack_libusb_device_base::btstack_packet_handler ); hci_connectable_control(0); // no services yet // turn on! hci_power_control(HCI_POWER_ON); // go run_loop_execute(); }
static void btstack_setup(){ printf("Starting up..\n"); /// GET STARTED /// btstack_memory_init(); run_loop_init(RUN_LOOP_POSIX); hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER); hci_transport_t * transport = hci_transport_usb_instance(); hci_uart_config_t * config = NULL; bt_control_t * control = NULL; remote_device_db_t * remote_db = (remote_device_db_t *) &remote_device_db_memory; hci_init(transport, config, control, remote_db); hci_set_class_of_device(0x200404); hci_discoverable_control(1); l2cap_init(); l2cap_register_packet_handler(&packet_handler2); l2cap_register_service_internal(NULL, packet_handler, PSM_SDP, 100, LEVEL_0); // turn on! hci_power_control(HCI_POWER_ON); }