void i2c_slave_end_listening(void)
{
_i2c_state.listening = false;
if(!i2c_is_busy()){
i2c_do_listen();
}
}
void i2c_slave_listen(void)
{
_i2c_state.listening = true;
if(!i2c_is_busy()){
i2c_do_listen();
}
}
static int i2c_is_busy_wait(struct saa7134_dev *dev)
{
enum i2c_status status;
int count;
for (count = 0; count < I2C_WAIT_RETRY; count++) {
status = i2c_get_status(dev);
if (!i2c_is_busy(status))
break;
saa_wait(I2C_WAIT_DELAY);
}
if (I2C_WAIT_RETRY == count)
return FALSE;
return TRUE;
}
static int i2c_wait_done(struct i2c_adapter *i2c_adap)
{
int count;
for (count = 0; count < I2C_WAIT_RETRY; count++) {
if (!i2c_is_busy(i2c_adap))
break;
udelay(I2C_WAIT_DELAY);
}
if (I2C_WAIT_RETRY == count)
return 0;
return 1;
}
/**
* Настраивает шину i2c в режим мастер.
* @param device адрес устройства.
* @param page_address адрес в устройстве.
* @param data данные.
* @param data_size размер данных.
* @return Код ошибки.
*/
err_t i2c_master_setup_rw(i2c_address_t device, void* page_address, size_t page_address_size, void* data, i2c_size_t data_size)
{
if(i2c_is_busy()) return E_BUSY;
if(data == NULL) return E_NULL_POINTER;
if(data_size == 0) return E_INVALID_VALUE;
if(page_address == NULL){
page_address_size = 0;
}else{
if(page_address_size == 0) return E_INVALID_VALUE;
}
i2c_data_init(&_i2c_state.master.data, page_address, page_address_size, data, data_size);
_i2c_state.master.device = device;
_i2c_state.has_transfer = true;
return E_NO_ERROR;
}
int chip_i2c_xfer(int port, int slave_addr, const uint8_t *out, int out_size,
uint8_t *in, int in_size, int flags)
{
struct i2c_port_data *pd = pdata + port;
uint32_t events = 0;
if (out_size == 0 && in_size == 0)
return EC_SUCCESS;
if (pd->i2ccs) {
if ((flags & I2C_XFER_SINGLE) == I2C_XFER_SINGLE)
flags &= ~I2C_XFER_START;
}
/* Copy data to port struct */
pd->out = out;
pd->out_size = out_size;
pd->in = in;
pd->in_size = in_size;
pd->flags = flags;
pd->widx = 0;
pd->ridx = 0;
pd->err = 0;
pd->addr = slave_addr;
if (port < I2C_STANDARD_PORT_COUNT) {
/* Make sure we're in a good state to start */
if ((flags & I2C_XFER_START) && (i2c_is_busy(port)
|| (IT83XX_SMB_HOSTA(port) & HOSTA_ALL_WC_BIT)
|| (i2c_get_line_levels(port) != I2C_LINE_IDLE))) {
/* Attempt to unwedge the port. */
i2c_unwedge(port);
/* reset i2c port */
i2c_reset(port, I2C_RC_NO_IDLE_FOR_START);
}
} else {
/* Make sure we're in a good state to start */
if ((flags & I2C_XFER_START) && (i2c_is_busy(port)
|| (i2c_get_line_levels(port) != I2C_LINE_IDLE))) {
/* Attempt to unwedge the port. */
i2c_unwedge(port);
/* reset i2c port */
i2c_reset(port, I2C_RC_NO_IDLE_FOR_START);
}
}
pd->task_waiting = task_get_current();
if (pd->flags & I2C_XFER_START) {
pd->i2ccs = I2C_CH_NORMAL;
/* enable i2c interrupt */
task_clear_pending_irq(i2c_ctrl_regs[port].irq);
task_enable_irq(i2c_ctrl_regs[port].irq);
}
/* Start transaction */
i2c_transaction(port);
/* Wait for transfer complete or timeout */
events = task_wait_event_mask(TASK_EVENT_I2C_IDLE, pd->timeout_us);
/* disable i2c interrupt */
task_disable_irq(i2c_ctrl_regs[port].irq);
pd->task_waiting = TASK_ID_INVALID;
/* Handle timeout */
if (!(events & TASK_EVENT_I2C_IDLE)) {
pd->err = EC_ERROR_TIMEOUT;
/* reset i2c port */
i2c_reset(port, I2C_RC_TIMEOUT);
}
/* reset i2c channel status */
if (pd->err)
pd->i2ccs = I2C_CH_NORMAL;
return pd->err;
}
